[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[davemanet]

I will. This is my very First try with smos. Is the rx dag fix version on the website contains the latest OC management functions ?

Yes. Fisrt boot will be doing many little updates.

ok thanks for the heads up, so just to confirm, DAG fix with core undervolt set to 900 should both improve hashrates and reduce energy consumption compared to the no dag fix version, and run stably right ? If yes, I'm doing the update.

Core undervolt depends on GPU.  I don't think it's universal is it?

[Vispilio]

I will. This is my very First try with smos. Is the rx dag fix version on the website contains the latest OC management functions ?

Yes. Fisrt boot will be doing many little updates.

ok thanks for the heads up, so just to confirm, DAG fix with core undervolt set to 900 should both improve hashrates and reduce energy consumption compared to the no dag fix version, and run stably right ? If yes, I'm doing the update.

Core undervolt depends on GPU.  I don't think it's universal is it?

I have RX580's running at powerstage 3, I have the voltmeter at another location so just looking for some input from other users for the optimal core undervolt value for the dag fix, to get equivalent energy levels compared to the no dag fix version. That makes the hash rate improvement all the more worthwhile.

[NBCminer]

Restart didn't help, when i removed overclock, strat it then add the overclock again, it seemed to be working, but if i restart again then it does the same problem again, the other rig after few restarts now will not overclock the first 2 GPUs only, and the rest are overclocked and working fine.
Any clues?

Please send me email to admin@simplemining.net - best with team viewer to any . windows on the smae networ as your rig or forward 22 port to your rig and tell me the access.

I have sent you an email, let me know what was the issue or how to fix the other rig.

Thank you

[amans.su]

I apologize for my English.

With WiFi-adapters but there is one "but": The GPU-cards of the rigs are noisy in the high-frequency bands so that Wi-Fi frequencies are clogged  in a radius of 20-40 centimeters, so it makes no sense to use the WiFi-adapter directly on the rig; after by start of mining, WiFi connect falls off. This does not apply to closed metal (shielded) rigs.

Users who want to use Wi-Fi, - I advise a cheap router for $10-15; something like: NETIS WF2411E. Configure the WAN through Wi-Fi  to your network, do a port forwarding (for example, 22 to work with SSH), and everything is fine!

The router should be carried from the rig to 1-2 meters. I put the router behind the wall, so that the radio-background did not bother him. My rig have been working steadily for a month now.

The address spaces must be separated; for example, your home network distributes the addresses of the space 192.168.0.XXX, then the ranges of router adresses of the rig must be either outside this space, or be like this (for example): 192.168.1.XXX

[chuck732]

Is the anyway to view GPU Power Usage and Efficiency? I saw a video on the utube and there was a box with this info in it on his screen the os running.

[amans.su]

Is the anyway to view GPU Power Usage and Efficiency? I saw a video on the utube and there was a box with this info in it on his screen the os running.

On the ewbf-0.3.4b, there is an option --api - for web monitoring (for example --api 0.0.0.0:42000), http://127.0.0.1:42000. Or --pec - for monitoring in the console. Efficiency  Hash(Sol)/Watt

[chuck732]

Thank you but how? I am trying to learn this and am lost a bit.Is it put into the same place that your wallet address is put? And what do I put?

Is the anyway to view GPU Power Usage and Efficiency? I saw a video on the utube and there was a box with this info in it on his screen the os running.

On the ewbf-0.3.4b, there is an option --api - for web monitoring (for example --api 0.0.0.0:42000), http://127.0.0.1:42000. Or --pec - for monitoring in the console. Efficiency  Hash(Sol)/Watt

[Fahim021]

I am using following setting to OC my MSI P-106 cards. It is way different than afterburner settings. I am having a feeling it can be further tweak. Experts please guide me.

core clock 95
Memory1450
power usage 110

Still +175w more with same speed that i get on windows with 6x ROG-STRIX-RX580-O8G-GAMING

You need to enter something like 900 . in undervolt.

Yes please share with us.  I see the "Update" button and would like more information before I click it.

Click it, you will see info in confirmation window.

the only thing is that you dont need to reflash your USB/SSD and can press update in order for it to work with hashrates back to normal... +more power consumption....
dissapointed...

Be sure you have even 850 and lets say 4 powerstage level and compare wattage.

Restart didn't help, when i removed overclock, strat it then add the overclock again, it seemed to be working, but if i restart again then it does the same problem again, the other rig after few restarts now will not overclock the first 2 GPUs only, and the rest are overclocked and working fine.
Any clues?

Please send me email to admin@simplemining.net - best with team viewer to any . windows on the smae networ as your rig or forward 22 port to your rig and tell me the access.


Wifi is unsupported and wont be anytime soon.

I just tried the DAG fix on one of the rigs, it downloaded very quickly and then did some compiling etc. to end up with no screen session on the console line. So I just reloaded the miner and changed some OC settings. Now it's exactly the same hash rate as before the DAG fix, how can I tell if this is the DAG fix version or not ?.. I still see the optional download red icon at the right corner...

Meaby you had dagfix already.
Hover on name of your rig.
If you will see .....compute-rocm... in kernel then you have dagfix.

[amans.su]

--server eu1-zcash.flypool.org --user tZCASH_ADRESS.WORKER --pass x --port 3333 --fee 0 --pec --api 0.0.0.0:42000

Thank you but how? I am trying to learn this and am lost a bit.Is it put into the same place that your wallet address is put? And what do I put?

Is the anyway to view GPU Power Usage and Efficiency? I saw a video on the utube and there was a box with this info in it on his screen the os running.

On the ewbf-0.3.4b, there is an option --api - for web monitoring (for example --api 0.0.0.0:42000), http://127.0.0.1:42000. Or --pec - for monitoring in the console. Efficiency  Hash(Sol)/Watt

[sony87]

I am using following setting to OC my MSI P-106 cards. It is way different than afterburner settings. I am having a feeling it can be further tweak. Experts please guide me.

core clock 95
Memory1450
power usage 110

this power usage will bring you nothing but heat, try:
core clock 80
Memory 1600
power usage 80
+ "-gser 1" in the config of Claymore to protect the  PSU and stabilize the starting of the miner, this help with x13 GPU setup

[Jakartinho]

Hello, i have a problem. NVIDIA 1080 cant overclock. I have update NV1127. How can i use updt 1128? Pls help me.. 2 days ago always be perfect,its new updt
What i need to do? Thx
I need reebot rig to get new update?

[chuck732]

Thank you veru much. Got it to work.

--server eu1-zcash.flypool.org --user tZCASH_ADRESS.WORKER --pass x --port 3333 --fee 0 --pec --api 0.0.0.0:42000

Thank you but how? I am trying to learn this and am lost a bit.Is it put into the same place that your wallet address is put? And what do I put?

Is the anyway to view GPU Power Usage and Efficiency? I saw a video on the utube and there was a box with this info in it on his screen the os running.

On the ewbf-0.3.4b, there is an option --api - for web monitoring (for example --api 0.0.0.0:42000), http://127.0.0.1:42000. Or --pec - for monitoring in the console. Efficiency  Hash(Sol)/Watt

[ledio]

How to enable\use teamviewer in smos?

[tytanick]

phenomenal, now it's working correctly and with a 4 - 5+ MH/s improvement on the hashrate / card depending on memory, superb. Just one Q., before the dag fix I had finally gotten acceptable energy levels at power stage 3, to keep the energy levels around the same, should I go for 900 on the core undervolt or even lower, while keeping power stage at 3 ?

You need to experiment with it. I have mine on powerstage 3 and 900 .
You should watch powermeter and try to lower powerstage or undervolting and if it takes less wattage and its stable then ok.
If not then try to rise powerstage first.
Anyway this works as powestage+undervolt so if you have 900mv at powerstage 7 and second case on powerstage 3, then this 3 will take less wattage.
I dont know exactly what happening, i just know from experience that it behaves like that


Each GPU has own tolerance for undervolting.
Even 6 indentical GPUs from the same part are totally different. Once could undervolt to 900 while other to 850 remaining stable.
Every GPU is very separate case Also risers are important.
Bad risers i think can result in less stable voltage and can cause problems.
In this word there is milion cases that something will go wrong

Is the anyway to view GPU Power Usage and Efficiency? I saw a video on the utube and there was a box with this info in it on his screen the os running.

I will add this to my TODO list and do it in some time yes.

Hello, i have a problem. NVIDIA 1080 cant overclock. I have update NV1127. How can i use updt 1128? Pls help me.. 2 days ago always be perfect,its new updt
What i need to do? Thx
I need reebot rig to get new update?

Please write to me at admin@simplemining.net
I want to take a look on your rig.
Can you forward ssh port to your mining rig ang give it to me VIA EMAIN (not here !)
Or prepare team viewer to ay windows that is in he same network as your rig ?
Also send me rig name and email of this rig.
I have very little cases that this update fixed maaany cases but also caused new problems that didnt existed before.
Also try rebooting our rig and see if that will fix your problem ! (it might).
If not then write to me to email.

How to enable\use teamviewer in smos?

There is no such thing. RX OS is console only. Headless OS.

[DangerD]

I have handmade PC resetter, I need to run infinite pings on it (keepalive). So how can I run additional command? Basically I can add it to miner command line:
Ping host -t & ...
will this work? Or any other solution?

[citronick]

I have handmade PC resetter, I need to run infinite pings on it (keepalive). So how can I run additional command? Basically I can add it to miner command line:
Ping host -t & ...
will this work? Or any other solution?

SRR?

[Jakartinho]

phenomenal, now it's working correctly and with a 4 - 5+ MH/s improvement on the hashrate / card depending on memory, superb. Just one Q., before the dag fix I had finally gotten acceptable energy levels at power stage 3, to keep the energy levels around the same, should I go for 900 on the core undervolt or even lower, while keeping power stage at 3 ?

You need to experiment with it. I have mine on powerstage 3 and 900 .
You should watch powermeter and try to lower powerstage or undervolting and if it takes less wattage and its stable then ok.
If not then try to rise powerstage first.
Anyway this works as powestage+undervolt so if you have 900mv at powerstage 7 and second case on powerstage 3, then this 3 will take less wattage.
I dont know exactly what happening, i just know from experience that it behaves like that


Each GPU has own tolerance for undervolting.
Even 6 indentical GPUs from the same part are totally different. Once could undervolt to 900 while other to 850 remaining stable.
Every GPU is very separate case Also risers are important.
Bad risers i think can result in less stable voltage and can cause problems.
In this word there is milion cases that something will go wrong

Is the anyway to view GPU Power Usage and Efficiency? I saw a video on the utube and there was a box with this info in it on his screen the os running.

I will add this to my TODO list and do it in some time yes.

Hello, i have a problem. NVIDIA 1080 cant overclock. I have update NV1127. How can i use updt 1128? Pls help me.. 2 days ago always be perfect,its new updt
What i need to do? Thx
I need reebot rig to get new update?

Please write to me at admin@simplemining.net
I want to take a look on your rig.
Can you forward ssh port to your mining rig ang give it to me VIA EMAIN (not here !)
Or prepare team viewer to ay windows that is in he same network as your rig ?
Also send me rig name and email of this rig.
I have very little cases that this update fixed maaany cases but also caused new problems that didnt existed before.
Also try rebooting our rig and see if that will fix your problem ! (it might).
If not then write to me to email.

How to enable\use teamviewer in smos?

There is no such thing. RX OS is console only. Headless OS.

reboot rig any times help me:)

[DigitalVHS]

Hi, why i see only 10 gpu in SMOS? i have 13 gpu and all 13 work but in field mem/core  in SMOS i see only 10 mem/core parametars.  And  i dont know how to oc all my cards becouse i dont see all 13.Sory for bad english, i hope you understud me.

[FirstRigger]

Hi, why i see only 10 gpu in SMOS? i have 13 gpu and all 13 work but in field mem/core  in SMOS i see only 10 mem/core parametars.  And  i dont know how to oc all my cards becouse i dont see all 13.Sory for bad english, i hope you understud me.

Admin knows that, he has this issue in his todo, will fix it soon.

[FirstRigger]

I try to test the undervolting with my 11x RX580, Asrock 110.

The card bios need to have the factory mV settings, like this (my original backup):
https://gyazo.com/01dbd07f38198fd6e5076c027653e440


Until now I did the undervolting directly in card-bios, so I have lower wattage.
https://gyazo.com/6e882a10110e923b83ad2177ca4f4ec6


Also I have now flashed on the cards the second (lower mV directly in bios). I setup in dashboard/overclocking nothing than 1000mV than 800mV to test,
but the result is always the same, 2130Watt from Wall with 11x RX580.
smOS dont can to overwrite the modified bios, right?

Very interesting.
I have 72 cards. Rx580 8g Nitro + only. They run on Windows and i Was waiting for proper oc and voltage management  in SMOS prior to switching.

All my cards have modded bios. Not the voltage but bios timing straps only.
Anyone has experience with modded straps ?
Today On Windows i get 31,5mhs eth + 980 mhs dcr @1000w for 6 cards. VCore @1150/900  Vram@ 2200/900

 I should start migration by tomorrow, hope i will get similar résults

My best result with smOS (before the last undervolt, etc. update).
11x RX580 Sapphyre Nitro+ 8g, Asrock 110h. All cards has ASIC between 71 and 79, all card accept the settings below (850mV), rig runs since ~3 Weeks stable (I have smOS since 3 Weeks.)
I use risers only with min 4 condenser (ver. 006c).

Only ETH: 335mhs @ 1760W @ 1175/2200, powerstage 1 (undervoltage 850mV direct in card bios - without this I had +~25W/card)

Dual ETH + DCR: 329/6580 @ 2035 @ 1130/2200, -dcri 20, powerstage 1 (undervoltage same direct in card bios)

I will try the undervolting from overclock modul, but I think, I need in card bios the original factory mV settings - I must try it yet.