jcumins
Full Member
Offline
Activity: 312
Merit: 100
Bcnex - The Ultimate Blockchain Trading Platform
|
|
December 08, 2014, 01:18:42 AM |
|
Thanks so much Jonny I had no idea it was actually tied to the shares. I per address. I have since set each miner to there own address so I can watch the performance per miner. And I have been playing with the settings and rebooting alot so the shares are zeroing out on each reboot. Looks like i just need to let it run for a few days and see how it goes. Thanks so much. JC
|
|
|
|
jcumins
Full Member
Offline
Activity: 312
Merit: 100
Bcnex - The Ultimate Blockchain Trading Platform
|
|
December 08, 2014, 01:21:49 AM |
|
Yes the node is running it is behind a goof firewall that I will have to open up ping and trace routes to.
I forgot all about that. I am connecting to it from a data center about 1000 miles away so i know it is accessible from the public. I will open the firewall for a few days to pings and trace routes
|
|
|
|
jonnybravo0311
Legendary
Offline
Activity: 1344
Merit: 1024
Mine at Jonny's Pool
|
|
December 08, 2014, 01:30:50 AM |
|
Thanks so much Jonny I had no idea it was actually tied to the shares. I per address. I have since set each miner to there own address so I can watch the performance per miner. And I have been playing with the settings and rebooting alot so the shares are zeroing out on each reboot. Looks like i just need to let it run for a few days and see how it goes. Thanks so much. JC It's not tied to the shares you see reported by your miners on their UI... it's tied to the shares you find that are accepted onto the share chain. Each share must meet at least a certain minimum target difficulty in order to be accepted onto the chain. As of the writing of this post, that difficulty is 12291862.97. You stated you've got a 1TH/s miner. That hash rate, with the current difficulty, translates into an expected time to share of 14.66 hours. Also keep in mind that once you find a share, it has to be accepted on the chain. An orphan share is one that you've added to the chain and broadcast to the network, but was rejected because the majority of the nodes already had a longer chain than the one you're broadcasting. A dead share is one that you found, but your local node rejected it when attempting to add it to the chain because your local copy of the chain was already longer. As I wrote previously, it's all about variance. I think a picture is worth a thousand words... so here's one for you: Here you can clearly see that even though the miner's hash rate has remained consistent, the expected payout line is up and down throughout the past month.
|
Jonny's Pool - Mine with us and help us grow! Support a pool that supports Bitcoin, not a hardware manufacturer's pockets! No SPV cheats. No empty blocks.
|
|
|
jonnybravo0311
Legendary
Offline
Activity: 1344
Merit: 1024
Mine at Jonny's Pool
|
|
December 08, 2014, 01:38:02 AM |
|
Yes the node is running it is behind a goof firewall that I will have to open up ping and trace routes to.
I forgot all about that. I am connecting to it from a data center about 1000 miles away so i know it is accessible from the public. I will open the firewall for a few days to pings and trace routes
I managed to get to your node... no idea why I couldn't earlier. So... your getBlockTemplate latency is atrocious. You're averaging 3.59 seconds. Also, you stated that you're 1000 miles away. Is your mining gear 1000 miles from your node? If yes, find a closer node as you're not going to get a very good ping time. Finally, looking at the payout graphs for the day, it appears only 1 of the miners on your node has found a share today, and looks like one might have been orphaned (or at least it was found almost immediately before one dropped off the chain).
|
Jonny's Pool - Mine with us and help us grow! Support a pool that supports Bitcoin, not a hardware manufacturer's pockets! No SPV cheats. No empty blocks.
|
|
|
jiyu_shi
Member
Offline
Activity: 81
Merit: 10
|
|
December 08, 2014, 03:13:44 AM |
|
successfully make p2pool at armhf debian 7.1. the computer is marsboard a20 that has 2 cortex-A7 cores CPU, 1G ram, 8G Nand, http://www.marsboard.com/new_marsboard_a20_feature.htmlOS is Debian_Wheezy_7.1_Lxde armhf. http://www.marsboard.com/new_marsboard_a20_download.htmlI think it's suitable for p2pool sever but without bitciond. first install some package and dev sudo apt-get install curl libncurses5-dev libffi-dev clean failure rubbish and remake marsboard@marsboard:~/p2pool$ sudo make clean rm -rf build rm -rf .coverage rm -rf "/home/marsboard/p2pool/.pyenv" marsboard@marsboard:~/p2pool$ sudo make rm -rf "/home/marsboard/p2pool/.pyenv" mkdir -p "/home/marsboard/p2pool/.pyenv" mkdir -p "/home/marsboard/p2pool/.cache"/pypi # Uncompress saved Python environment tar -C "/home/marsboard/p2pool/.pyenv" --gzip -xf "/home/marsboard/p2pool/.cache"/pyenv/pyenv-1.11.6-base.tar.gz find "/home/marsboard/p2pool/.pyenv" -not -type d -print0 >"/home/marsboard/p2pool"/.pkglist # readline is installed here to get around a bug on Mac OS X # which is causing readline to not build properly if installed # from pip, and the fact that a different package must be used # to support it on Windows/Cygwin. if [ "x`uname -s`" = "xCygwin" ]; then \ "/home/marsboard/p2pool/.pyenv"/bin/pip install pyreadline; \ else \ "/home/marsboard/p2pool/.pyenv"/bin/easy_install readline; \ fi Searching for readline Reading https://pypi.python.org/simple/readline/ Best match: readline 6.2.4.1 Downloading https://pypi.python.org/packages/source/r/readline/readline-6.2.4.1.tar.gz#md5=578237939c81fdbc2c8334d168b17907 Processing readline-6.2.4.1.tar.gz Writing /tmp/easy_install-saNPN5/readline-6.2.4.1/setup.cfg Running readline-6.2.4.1/setup.py -q bdist_egg --dist-dir /tmp/easy_install-saNPN5/readline-6.2.4.1/egg-dist-tmp-OVu_b5 Adding readline 6.2.4.1 to easy-install.pth file
Installed /home/marsboard/p2pool/.pyenv/lib/python2.7/site-packages/readline-6.2.4.1-py2.7-linux-armv7l.egg Processing dependencies for readline Finished processing dependencies for readline # pip is used to install Python dependencies for this project. for reqfile in "/home/marsboard/p2pool"/requirements.txt \ "/home/marsboard/p2pool/conf"/requirements*.txt; do \ "/home/marsboard/p2pool/.pyenv"/bin/python "/home/marsboard/p2pool/.pyenv"/bin/pip install \ --download-cache="/home/marsboard/p2pool/.cache"/pypi \ -r "$reqfile" || exit 1; \ done Downloading/unpacking Twisted>=12.2.0 (from -r /home/marsboard/p2pool/requirements.txt (line 1)) Using download cache from /home/marsboard/p2pool/.cache/pypi/https%3A%2F%2Fpypi.python.org%2Fpackages%2Fsource%2FT%2FTwisted%2FTwisted-14.0.2.tar.bz2 Running setup.py (path:/home/marsboard/p2pool/.pyenv/build/Twisted/setup.py) egg_info for package Twisted Requirement already satisfied (use --upgrade to upgrade): argparse>=1.2.1 in /usr/lib/python2.7 (from -r /home/marsboard/p2pool/requirements.txt (line 2)) Downloading/unpacking pyOpenSSL>=0.13 (from -r /home/marsboard/p2pool/requirements.txt (line 3)) Using download cache from /home/marsboard/p2pool/.cache/pypi/https%3A%2F%2Fpypi.python.org%2Fpackages%2Fsource%2Fp%2FpyOpenSSL%2FpyOpenSSL-0.14.tar.gz Running setup.py (path:/home/marsboard/p2pool/.pyenv/build/pyOpenSSL/setup.py) egg_info for package pyOpenSSL warning: no previously-included files matching '*.pyc' found anywhere in distribution no previously-included directories found matching 'doc/_build' Downloading/unpacking zope.interface>=3.6.0 (from Twisted>=12.2.0->-r /home/marsboard/p2pool/requirements.txt (line 1)) Using download cache from /home/marsboard/p2pool/.cache/pypi/https%3A%2F%2Fpypi.python.org%2Fpackages%2Fsource%2Fz%2Fzope.interface%2Fzope.interface-4.1.1.tar.gz Running setup.py (path:/home/marsboard/p2pool/.pyenv/build/zope.interface/setup.py) egg_info for package zope.interface warning: no previously-included files matching '*.dll' found anywhere in distribution warning: no previously-included files matching '*.pyc' found anywhere in distribution warning: no previously-included files matching '*.pyo' found anywhere in distribution warning: no previously-included files matching '*.so' found anywhere in distribution Downloading/unpacking cryptography>=0.2.1 (from pyOpenSSL>=0.13->-r /home/marsboard/p2pool/requirements.txt (line 3)) Using download cache from /home/marsboard/p2pool/.cache/pypi/https%3A%2F%2Fpypi.python.org%2Fpackages%2Fsource%2Fc%2Fcryptography%2Fcryptography-0.6.1.tar.gz Running setup.py (path:/home/marsboard/p2pool/.pyenv/build/cryptography/setup.py) egg_info for package cryptography no previously-included directories found matching 'docs/_build' warning: no previously-included files matching '*' found under directory 'vectors' Downloading/unpacking six>=1.5.2 (from pyOpenSSL>=0.13->-r /home/marsboard/p2pool/requirements.txt (line 3)) Using download cache from /home/marsboard/p2pool/.cache/pypi/https%3A%2F%2Fpypi.python.org%2Fpackages%2Fpy2.py3%2Fs%2Fsix%2Fsix-1.8.0-py2.py3-none-any.whl Requirement already satisfied (use --upgrade to upgrade): setuptools in ./.pyenv/lib/python2.7/site-packages (from zope.interface>=3.6.0->Twisted>=12.2.0->-r /home/marsboard/p2pool/requirements.txt (line 1)) Downloading/unpacking cffi>=0.8 (from cryptography>=0.2.1->pyOpenSSL>=0.13->-r /home/marsboard/p2pool/requirements.txt (line 3)) Using download cache from /home/marsboard/p2pool/.cache/pypi/https%3A%2F%2Fpypi.python.org%2Fpackages%2Fsource%2Fc%2Fcffi%2Fcffi-0.8.6.tar.gz Running setup.py (path:/home/marsboard/p2pool/.pyenv/build/cffi/setup.py) egg_info for package cffi Downloading/unpacking pycparser (from cffi>=0.8->cryptography>=0.2.1->pyOpenSSL>=0.13->-r /home/marsboard/p2pool/requirements.txt (line 3)) Using download cache from /home/marsboard/p2pool/.cache/pypi/https%3A%2F%2Fpypi.python.org%2Fpackages%2Fsource%2Fp%2Fpycparser%2Fpycparser-2.10.tar.gz Running setup.py (path:/home/marsboard/p2pool/.pyenv/build/pycparser/setup.py) egg_info for package pycparser Installing collected packages: Twisted, pyOpenSSL, zope.interface, cryptography, six, cffi, pycparser Running setup.py install for Twisted gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c conftest.c -o conftest.o building 'twisted.runner.portmap' extension gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c twisted/runner/portmap.c -o build/temp.linux-armv7l-2.7/twisted/runner/portmap.o gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro build/temp.linux-armv7l-2.7/twisted/runner/portmap.o -o build/lib.linux-armv7l-2.7/twisted/runner/portmap.so building 'twisted.test.raiser' extension gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c twisted/test/raiser.c -o build/temp.linux-armv7l-2.7/twisted/test/raiser.o gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro build/temp.linux-armv7l-2.7/twisted/test/raiser.o -o build/lib.linux-armv7l-2.7/twisted/test/raiser.so building 'twisted.python.sendmsg' extension gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c twisted/python/sendmsg.c -o build/temp.linux-armv7l-2.7/twisted/python/sendmsg.o gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro build/temp.linux-armv7l-2.7/twisted/python/sendmsg.o -o build/lib.linux-armv7l-2.7/twisted/python/sendmsg.so changing mode of build/scripts-2.7/twistd from 644 to 755 changing mode of build/scripts-2.7/tap2deb from 644 to 755 changing mode of build/scripts-2.7/manhole from 644 to 755 changing mode of build/scripts-2.7/pyhtmlizer from 644 to 755 changing mode of build/scripts-2.7/trial from 644 to 755 changing mode of build/scripts-2.7/tapconvert from 644 to 755 changing mode of build/scripts-2.7/tap2rpm from 644 to 755 changing mode of build/scripts-2.7/lore from 644 to 755 changing mode of build/scripts-2.7/mailmail from 644 to 755 changing mode of build/scripts-2.7/ckeygen from 644 to 755 changing mode of build/scripts-2.7/tkconch from 644 to 755 changing mode of build/scripts-2.7/conch from 644 to 755 changing mode of build/scripts-2.7/cftp from 644 to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/ckeygen to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/twistd to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/lore to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/tap2deb to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/manhole to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/pyhtmlizer to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/tkconch to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/mailmail to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/trial to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/tapconvert to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/tap2rpm to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/conch to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/cftp to 755 Running setup.py install for pyOpenSSL warning: no previously-included files matching '*.pyc' found anywhere in distribution no previously-included directories found matching 'doc/_build' Running setup.py install for zope.interface warning: no previously-included files matching '*.dll' found anywhere in distribution warning: no previously-included files matching '*.pyc' found anywhere in distribution warning: no previously-included files matching '*.pyo' found anywhere in distribution warning: no previously-included files matching '*.so' found anywhere in distribution building 'zope.interface._zope_interface_coptimizations' extension gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c src/zope/interface/_zope_interface_coptimizations.c -o build/temp.linux-armv7l-2.7/src/zope/interface/_zope_interface_coptimizations.o gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro build/temp.linux-armv7l-2.7/src/zope/interface/_zope_interface_coptimizations.o -o build/lib.linux-armv7l-2.7/zope/interface/_zope_interface_coptimizations.so Skipping installation of /home/marsboard/p2pool/.pyenv/lib/python2.7/site-packages/zope/__init__.py (namespace package) Installing /home/marsboard/p2pool/.pyenv/lib/python2.7/site-packages/zope.interface-4.1.1-py2.7-nspkg.pth Running setup.py install for cryptography no previously-included directories found matching 'documentation/_build' zip_safe flag not set; analyzing archive contents... six: module references __path__ Installed /home/marsboard/p2pool/.pyenv/build/cryptography/six-1.8.0-py2.7.egg Searching for cffi>=0.8 Reading https://pypi.python.org/simple/cffi/ Best match: cffi 0.8.6 Downloading https://pypi.python.org/packages/source/c/cffi/cffi-0.8.6.tar.gz#md5=474b5a68299a6f05009171de1dc91be6 Processing cffi-0.8.6.tar.gz Writing /tmp/easy_install-XE2ivH/cffi-0.8.6/setup.cfg Running cffi-0.8.6/setup.py -q bdist_egg --dist-dir /tmp/easy_install-XE2ivH/cffi-0.8.6/egg-dist-tmp-2lrqfr compiling '_configtest.c': __thread int some_threadlocal_variable_42; gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -c _configtest.c -o _configtest.o success! removing: _configtest.c _configtest.o Installed /home/marsboard/p2pool/.pyenv/build/cryptography/cffi-0.8.6-py2.7-linux-armv7l.egg Searching for pycparser Reading https://pypi.python.org/simple/pycparser/ Best match: pycparser 2.10 Downloading https://pypi.python.org/packages/source/p/pycparser/pycparser-2.10.tar.gz#md5=d87aed98c8a9f386aa56d365fe4d515f Processing pycparser-2.10.tar.gz Writing /tmp/easy_install-1WyaNi/pycparser-2.10/setup.cfg Running pycparser-2.10/setup.py -q bdist_egg --dist-dir /tmp/easy_install-1WyaNi/pycparser-2.10/egg-dist-tmp-xl5Cc5 zip_safe flag not set; analyzing archive contents... Installed /home/marsboard/p2pool/.pyenv/build/cryptography/pycparser-2.10-py2.7.egg building '_Cryptography_cffi_fc665d23x4f158fee' extension gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c cryptography/hazmat/primitives/__pycache__/_Cryptography_cffi_fc665d23x4f158fee.c -o /home/marsboard/p2pool/.pyenv/build/cryptography/cryptography/hazmat/primitives/__pycache__/cryptography/hazmat/primitives/__pycache__/_Cryptography_cffi_fc665d23x4f158fee.o gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro /home/marsboard/p2pool/.pyenv/build/cryptography/cryptography/hazmat/primitives/__pycache__/cryptography/hazmat/primitives/__pycache__/_Cryptography_cffi_fc665d23x4f158fee.o -o /home/marsboard/p2pool/.pyenv/build/cryptography/cryptography/hazmat/primitives/__pycache__/_Cryptography_cffi_fc665d23x4f158fee.so building '_Cryptography_cffi_8f86901cxc1767c5a' extension gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c cryptography/hazmat/primitives/__pycache__/_Cryptography_cffi_8f86901cxc1767c5a.c -o /home/marsboard/p2pool/.pyenv/build/cryptography/cryptography/hazmat/primitives/__pycache__/cryptography/hazmat/primitives/__pycache__/_Cryptography_cffi_8f86901cxc1767c5a.o gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro /home/marsboard/p2pool/.pyenv/build/cryptography/cryptography/hazmat/primitives/__pycache__/cryptography/hazmat/primitives/__pycache__/_Cryptography_cffi_8f86901cxc1767c5a.o -o /home/marsboard/p2pool/.pyenv/build/cryptography/cryptography/hazmat/primitives/__pycache__/_Cryptography_cffi_8f86901cxc1767c5a.so building '_Cryptography_cffi_36a40ff0x2bad1bae' extension gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c cryptography/hazmat/bindings/__pycache__/_Cryptography_cffi_36a40ff0x2bad1bae.c -o /home/marsboard/p2pool/.pyenv/build/cryptography/cryptography/hazmat/bindings/__pycache__/cryptography/hazmat/bindings/__pycache__/_Cryptography_cffi_36a40ff0x2bad1bae.o gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro /home/marsboard/p2pool/.pyenv/build/cryptography/cryptography/hazmat/bindings/__pycache__/cryptography/hazmat/bindings/__pycache__/_Cryptography_cffi_36a40ff0x2bad1bae.o -lssl -lcrypto -o /home/marsboard/p2pool/.pyenv/build/cryptography/cryptography/hazmat/bindings/__pycache__/_Cryptography_cffi_36a40ff0x2bad1bae.so no previously-included directories found matching 'docs/_build' warning: no previously-included files matching '*' found under directory 'vectors' building '_Cryptography_cffi_36a40ff0x2bad1bae' extension gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c cryptography/hazmat/bindings/__pycache__/_Cryptography_cffi_36a40ff0x2bad1bae.c -o build/temp.linux-armv7l-2.7/cryptography/hazmat/bindings/__pycache__/_Cryptography_cffi_36a40ff0x2bad1bae.o gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro build/temp.linux-armv7l-2.7/cryptography/hazmat/bindings/__pycache__/_Cryptography_cffi_36a40ff0x2bad1bae.o -lssl -lcrypto -o build/lib.linux-armv7l-2.7/cryptography/_Cryptography_cffi_36a40ff0x2bad1bae.so building '_Cryptography_cffi_fc665d23x4f158fee' extension gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c cryptography/hazmat/primitives/__pycache__/_Cryptography_cffi_fc665d23x4f158fee.c -o build/temp.linux-armv7l-2.7/cryptography/hazmat/primitives/__pycache__/_Cryptography_cffi_fc665d23x4f158fee.o gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro build/temp.linux-armv7l-2.7/cryptography/hazmat/primitives/__pycache__/_Cryptography_cffi_fc665d23x4f158fee.o -o build/lib.linux-armv7l-2.7/cryptography/_Cryptography_cffi_fc665d23x4f158fee.so building '_Cryptography_cffi_8f86901cxc1767c5a' extension gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c cryptography/hazmat/primitives/__pycache__/_Cryptography_cffi_8f86901cxc1767c5a.c -o build/temp.linux-armv7l-2.7/cryptography/hazmat/primitives/__pycache__/_Cryptography_cffi_8f86901cxc1767c5a.o gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro build/temp.linux-armv7l-2.7/cryptography/hazmat/primitives/__pycache__/_Cryptography_cffi_8f86901cxc1767c5a.o -o build/lib.linux-armv7l-2.7/cryptography/_Cryptography_cffi_8f86901cxc1767c5a.so Running setup.py install for cffi building '_cffi_backend' extension gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -DUSE__THREAD -I/usr/include/python2.7 -c c/_cffi_backend.c -o build/temp.linux-armv7l-2.7/c/_cffi_backend.o gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro build/temp.linux-armv7l-2.7/c/_cffi_backend.o -lffi -o build/lib.linux-armv7l-2.7/_cffi_backend.so Running setup.py install for pycparser Successfully installed Twisted pyOpenSSL zope.interface cryptography six cffi pycparser Cleaning up... Downloading/unpacking ipdb==0.8 (from -r /home/marsboard/p2pool/conf/requirements-development.txt (line 1)) Using download cache from /home/marsboard/p2pool/.cache/pypi/https%3A%2F%2Fpypi.python.org%2Fpackages%2Fsource%2Fi%2Fipdb%2Fipdb-0.8.zip Running setup.py (path:/home/marsboard/p2pool/.pyenv/build/ipdb/setup.py) egg_info for package ipdb Downloading/unpacking ipython==2.2.0 (from -r /home/marsboard/p2pool/conf/requirements-development.txt (line 2)) Downloading ipython-2.2.0-py27-none-any.whl (2.8MB): 2.8MB downloaded Storing download in cache at ./.cache/pypi/https%3A%2F%2Fpypi.python.org%2Fpackages%2F2.7%2Fi%2Fipython%2Fipython-2.2.0-py27-none-any.whl Installing collected packages: ipdb, ipython Running setup.py install for ipdb Installing ipdb script to /home/marsboard/p2pool/.pyenv/bin Successfully installed ipdb ipython Cleaning up... Downloading/unpacking coverage==3.7.1 (from -r /home/marsboard/p2pool/conf/requirements-testing.txt (line 1)) Downloading coverage-3.7.1.tar.gz (284kB): 284kB downloaded Storing download in cache at ./.cache/pypi/https%3A%2F%2Fpypi.python.org%2Fpackages%2Fsource%2Fc%2Fcoverage%2Fcoverage-3.7.1.tar.gz Running setup.py (path:/home/marsboard/p2pool/.pyenv/build/coverage/setup.py) egg_info for package coverage warning: no previously-included files matching '*.pyc' found anywhere in distribution Downloading/unpacking unittest-xml-reporting==1.9.0 (from -r /home/marsboard/p2pool/conf/requirements-testing.txt (line 2)) Downloading unittest-xml-reporting-1.9.0.tar.gz Storing download in cache at ./.cache/pypi/https%3A%2F%2Fpypi.python.org%2Fpackages%2Fsource%2Fu%2Funittest-xml-reporting%2Funittest-xml-reporting-1.9.0.tar.gz Running setup.py (path:/home/marsboard/p2pool/.pyenv/build/unittest-xml-reporting/setup.py) egg_info for package unittest-xml-reporting Downloading/unpacking unittest2==0.5.1 (from -r /home/marsboard/p2pool/conf/requirements-testing.txt (line 3)) Downloading unittest2-0.5.1.tar.gz (62kB): 62kB downloaded Storing download in cache at ./.cache/pypi/https%3A%2F%2Fpypi.python.org%2Fpackages%2Fsource%2Fu%2Funittest2%2Funittest2-0.5.1.tar.gz Running setup.py (path:/home/marsboard/p2pool/.pyenv/build/unittest2/setup.py) egg_info for package unittest2 Requirement already satisfied (use --upgrade to upgrade): six in ./.pyenv/lib/python2.7/site-packages (from unittest-xml-reporting==1.9.0->-r /home/marsboard/p2pool/conf/requirements-testing.txt (line 2)) Installing collected packages: coverage, unittest-xml-reporting, unittest2 Running setup.py install for coverage building 'coverage.tracer' extension gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c coverage/tracer.c -o build/temp.linux-armv7l-2.7/coverage/tracer.o gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro build/temp.linux-armv7l-2.7/coverage/tracer.o -o build/lib.linux-armv7l-2.7/coverage/tracer.so warning: no previously-included files matching '*.pyc' found anywhere in distribution Installing coverage2 script to /home/marsboard/p2pool/.pyenv/bin Installing coverage-2.7 script to /home/marsboard/p2pool/.pyenv/bin Installing coverage script to /home/marsboard/p2pool/.pyenv/bin Running setup.py install for unittest-xml-reporting Running setup.py install for unittest2 changing mode of build/scripts-2.7/unit2.py from 644 to 755 changing mode of build/scripts-2.7/unit2 from 644 to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/unit2.py to 755 changing mode of /home/marsboard/p2pool/.pyenv/bin/unit2 to 755 Installing unit2 script to /home/marsboard/p2pool/.pyenv/bin Installing unit2-2.7 script to /home/marsboard/p2pool/.pyenv/bin Successfully installed coverage unittest-xml-reporting unittest2 Cleaning up... # Snapshot the Python environment cat "/home/marsboard/p2pool"/.pkglist | xargs -0 rm -rf tar -C "/home/marsboard/p2pool/.pyenv" --gzip -cf "/home/marsboard/p2pool/.cache/pyenv/pyenv-1.11.6-extras.tar.gz" . rm -rf "/home/marsboard/p2pool/.pyenv" "/home/marsboard/p2pool"/.pkglist rm -rf "/home/marsboard/p2pool/.pyenv" mkdir -p "/home/marsboard/p2pool/.pyenv" # Uncompress saved Python environment tar -C "/home/marsboard/p2pool/.pyenv" --gzip -xf "/home/marsboard/p2pool/.cache"/pyenv/pyenv-1.11.6-base.tar.gz tar -C "/home/marsboard/p2pool/.pyenv" --gzip -xf "/home/marsboard/p2pool/.cache"/pyenv/pyenv-1.11.6-extras.tar.gz # All done! touch "/home/marsboard/p2pool/.pyenv/.stamp-h" marsboard@marsboard:~/p2pool$ python run_p2pool.py --help /usr/local/lib/python2.7/dist-packages/zope.interface-4.1.1-py2.7-linux-armv7l.egg/zope/__init__.py:3: UserWarning: Module twisted was already imported from /usr/local/lib/python2.7/dist-packages/Twisted-14.0.2-py2.7-linux-armv7l.egg/twisted/__init__.pyc, but /usr/local/lib/python2.7/dist-packages/autobahn-0.9.3_3-py2.7.egg is being added to sys.path import pkg_resources usage: run_p2pool.py [-h] [--version] [--net {bitcoin,fastcoin,litecoin,terracoin}] [--testnet] [--debug] [-a ADDRESS] [--datadir DATADIR] [--logfile LOGFILE] [--merged MERGED_URLS] [--give-author DONATION_PERCENTAGE] [--iocp] [--irc-announce] [--no-bugreport] [--p2pool-port PORT] [-n ADDR[:PORT]] [--disable-upnp] [--max-conns CONNS] [--outgoing-conns CONNS] [--external-ip ADDR[:PORT]] [--disable-advertise] [-w PORT or ADDR:PORT] [-f FEE_PERCENTAGE] [--bitcoind-config-path BITCOIND_CONFIG_PATH] [--bitcoind-address BITCOIND_ADDRESS] [--bitcoind-rpc-port BITCOIND_RPC_PORT] [--bitcoind-rpc-ssl] [--bitcoind-p2p-port BITCOIND_P2P_PORT] [BITCOIND_RPCUSERPASS [BITCOIND_RPCUSERPASS ...]]
p2pool (version 13.4-57-gdfad3cd)
optional arguments: -h, --help show this help message and exit --version show program's version number and exit --net {bitcoin,fastcoin,litecoin,terracoin} use specified network (default: bitcoin) --testnet use the network's testnet --debug enable debugging mode -a ADDRESS, --address ADDRESS generate payouts to this address (default: <address requested from bitcoind>) --datadir DATADIR store data in this directory (default: <directory run_p2pool.py is in>/data) --logfile LOGFILE log to this file (default: data/<NET>/log) --merged MERGED_URLS call getauxblock on this url to get work for merged mining (example: http://ncuser:ncpass@127.0.0.1:10332/) --give-author DONATION_PERCENTAGE donate this percentage of work towards the development of p2pool (default: 1.0) --iocp use Windows IOCP API in order to avoid errors due to large number of sockets being open --irc-announce announce any blocks found on irc://irc.freenode.net/#p2pool --no-bugreport disable submitting caught exceptions to the author --disable-upnp don't attempt to use UPnP to forward p2pool's P2P port from the Internet to this computer --disable-advertise don't advertise local IP address as being available for incoming connections. useful for running a dark node, along with multiple -n ADDR's and --outgoing- conns 0
p2pool interface: --p2pool-port PORT use port PORT to listen for connections (forward this port from your router!) (default: bitcoin:9333, fastcoin:23660, litecoin:9338, terracoin:9323) -n ADDR[:PORT], --p2pool-node ADDR[:PORT] connect to existing p2pool node at ADDR listening on port PORT (defaults to default p2pool P2P port) in addition to builtin addresses --max-conns CONNS maximum incoming connections (default: 40) --outgoing-conns CONNS outgoing connections (default: 6) --external-ip ADDR[:PORT] specify your own public IP address instead of asking peers to discover it, useful for running dual WAN or asymmetric routing
worker interface: -w PORT or ADDR:PORT, --worker-port PORT or ADDR:PORT listen on PORT on interface with ADDR for RPC connections from miners (default: all interfaces, bitcoin:9332, fastcoin:5150, litecoin:9327, terracoin:9322) -f FEE_PERCENTAGE, --fee FEE_PERCENTAGE charge workers mining to their own bitcoin address (by setting their miner's username to a bitcoin address) this percentage fee to mine on your p2pool instance. Amount displayed at http://127.0.0.1:WORKER_PORT/fee (default: 0)
bitcoind interface: --bitcoind-config-path BITCOIND_CONFIG_PATH custom configuration file path (when bitcoind -conf option used) --bitcoind-address BITCOIND_ADDRESS connect to this address (default: 127.0.0.1) --bitcoind-rpc-port BITCOIND_RPC_PORT connect to JSON-RPC interface at this port (default: bitcoin:8332, fastcoin:9527, litecoin:9332, terracoin:13332 <read from bitcoin.conf if password not provided>) --bitcoind-rpc-ssl connect to JSON-RPC interface using SSL --bitcoind-p2p-port BITCOIND_P2P_PORT connect to P2P interface at this port (default: bitcoin:8333, fastcoin:9526, litecoin:9333, terracoin:13333 <read from bitcoin.conf if password not provided>) BITCOIND_RPCUSERPASS bitcoind RPC interface username, then password, space- separated (only one being provided will cause the username to default to being empty, and none will cause P2Pool to read them from bitcoin.conf) marsboard@marsboard:~/p2pool$ python run_p2pool.py --version /usr/local/lib/python2.7/dist-packages/zope.interface-4.1.1-py2.7-linux-armv7l.egg/zope/__init__.py:3: UserWarning: Module twisted was already imported from /usr/local/lib/python2.7/dist-packages/Twisted-14.0.2-py2.7-linux-armv7l.egg/twisted/__init__.pyc, but /usr/local/lib/python2.7/dist-packages/autobahn-0.9.3_3-py2.7.egg is being added to sys.path import pkg_resources 13.4-57-gdfad3cd marsboard@marsboard:~/p2pool$
|
|
|
|
jcumins
Full Member
Offline
Activity: 312
Merit: 100
Bcnex - The Ultimate Blockchain Trading Platform
|
|
December 08, 2014, 05:18:00 AM |
|
Jonny
The reason you were not able to connect i ;Ds because i had the firewall locked down to the subnet of my data center link. I was able to correct this. Our data center has us really bandwidth limited so i intend to get this resolved in the morning. Our latency from my office to there should be alot faster then it is currently.
I am in the process of building a new Debian box that I have placed in the data center so that should fix this issue..
Thanks so much for your input I greatly appreciate it.
|
|
|
|
mahrens917
|
|
December 08, 2014, 05:34:00 AM |
|
I created a chatbox for all p2pool users. Just like this forum does, in brining p2pool operators and power p2pool users together, a chatbox on each every p2pool node's home page can do the same for the entire p2pool community. At least, it is worth a shot. To see the chatbox you can go to us-east.p2pool.co or europe.p2pool.co and if you would like to add it to your own p2pool site you can do so by just adding this line: <iframe width=90% height=400px src="https://chatbox.com/#/p=6_qWgAgGqT29Eg==LS9g3ZbmtCThSWWnugDCrkHUQrs="></iframe>
|
|
|
|
idonothave
|
|
December 08, 2014, 08:35:36 AM |
|
My node ip is as follows:
207.105.189.40:9332
Please lety me know what you think is right and what i can do better
thanks
Your getblock template latency is over 3.73s (3730ms). My average is 0.224s (224ms) just now. The problem is in Your bitcoind or bitcoin-qt or You run something merged?
|
|
|
|
jcumins
Full Member
Offline
Activity: 312
Merit: 100
Bcnex - The Ultimate Blockchain Trading Platform
|
|
December 08, 2014, 06:58:10 PM |
|
I am not mergmining at all. But yes i could have something set wrong. Thats for sue this is my first setup. Where is the setting for merged or not will have to look for that.
|
|
|
|
mahrens917
|
|
December 08, 2014, 07:07:50 PM |
|
I am not mergmining at all. But yes i could have something set wrong. Thats for sue this is my first setup. Where is the setting for merged or not will have to look for that.
What does your ~/.bitcoin/bitcoin.conf file look like? (Please BLANK OUT your rpc user and password). If blockmaxsize is large that can add to your getwork latency significantly.
|
|
|
|
jcumins
Full Member
Offline
Activity: 312
Merit: 100
Bcnex - The Ultimate Blockchain Trading Platform
|
|
December 08, 2014, 08:45:37 PM |
|
The block max size is set really high what do you recommend
I have seen on line 250000 to 1000000 size
Thats probably it.
|
|
|
|
|
norgan
|
|
December 09, 2014, 12:17:51 AM |
|
I created a chatbox for all p2pool users. Just like this forum does, in brining p2pool operators and power p2pool users together, a chatbox on each every p2pool node's home page can do the same for the entire p2pool community. At least, it is worth a shot. To see the chatbox you can go to us-east.p2pool.co or europe.p2pool.co and if you would like to add it to your own p2pool site you can do so by just adding this line: <iframe width=90% height=400px src="https://chatbox.com/#/p=6_qWgAgGqT29Eg==LS9g3ZbmtCThSWWnugDCrkHUQrs="></iframe>
Thanks, I've added it to my node's page.
|
|
|
|
jcumins
Full Member
Offline
Activity: 312
Merit: 100
Bcnex - The Ultimate Blockchain Trading Platform
|
|
December 09, 2014, 01:46:20 AM |
|
Yes i sure did...
|
|
|
|
PatMan
|
|
December 09, 2014, 07:38:02 PM |
|
Use caution when messing with your settings according to the various guides, many of them are outdated & refer to the good old days of GPU mining, which is completely different from asics. They are guides, not bibles. Personally, I stopped tweaking my bitcoind & p2pool settings a long time ago & leave everything default - it just works. If you are new to p2pool, it is always best to familiarise yourself with how it works with default settings first, tweaking settings without knowing what you're doing can lead to terrible performance & thus earnings. If you want to tweak your settings, do it little by little, the results of your changes might not become immediately apparent. Above all, be patient
|
|
|
|
chinesebob
Newbie
Offline
Activity: 64
Merit: 0
|
|
December 09, 2014, 07:45:06 PM |
|
I am not mergmining at all. But yes i could have something set wrong. Thats for sue this is my first setup. Where is the setting for merged or not will have to look for that.
What does your ~/.bitcoin/bitcoin.conf file look like? (Please BLANK OUT your rpc user and password). If blockmaxsize is large that can add to your getwork latency significantly. How can I query bitcoind to see what it's current setting for blockmaxsize is? Anyone know the current default? Is there an api call for getwork_latency in my p2pool node, or some other way of getting that information through a shell?
|
|
|
|
|
P2Pools
Newbie
Offline
Activity: 5
Merit: 0
|
|
December 09, 2014, 08:44:11 PM |
|
Massive server upgrade for p2pools.us. Must faster, low latency, less DOA hash. Servers Located in New York, USA Check it out: p2pools.us or btc.p2pools.us:9332
|
|
|
|
chinesebob
Newbie
Offline
Activity: 64
Merit: 0
|
|
December 09, 2014, 08:58:45 PM |
|
That's a nice list but, I don't see anything about blockmaxsize or getwork_latency, do you know which call I should look at?
|
|
|
|
PatMan
|
|
December 09, 2014, 09:11:25 PM |
|
That's a nice list but, I don't see anything about blockmaxsize or getwork_latency, do you know which call I should look at? #Block creation options blockminsize=0 #(Sizes are in bytes) default: 0 blockmaxsize=500000 #default: 750000 blockprioritysize=196000 # high-priority/low-fee transactions d: 50000
Never underestimate the power of the search function......
|
|
|
|
|