[ mining os ] nvoc

[JayneL]

Tnx for this papampi, can u also compile one working for x17 algo? current miner wont run always screen is terminating..

Thanks

Merry Christmas

[papampi]

Tnx for this papampi, can u also compile one working for x17 algo? current miner wont run always screen is terminating..

Thanks

Merry Christmas

KlausT should work with x17, try to lower the intensity

[CryptAtomeTrader44]

Here is the Klaust ccminer v 8.17 compiled with cuda 8
So far I get so much better neoscrypt hashrate with it
SPccminer was giving me around 400 with 1060 and KT is giving me more than 630


KTccminer-v8.17

Download, extract and copy it to /home/m1/KTccminer folder.
Please test and check before replacing your old version.

Change 0miner for the coins you want it to be the default miner.

Any one testing KlausT ccminer 8.17 please report your hashrate and changes to default miners so we can change the default miners if its better on those coins.
Thanks.

Just tested yourt KTccminer compiled instead of TPccminer and this is not functional for me.
i just replace TPccminer in command lines by KTccminer in 0miner file.

My rig entering in a loop ...

do I also have to modify the command line in the 0miner file with arguments other than TPcciminer!?

[JayneL]

Help pls this is my error

[papampi]

Here is the Klaust ccminer v 8.17 compiled with cuda 8
So far I get so much better neoscrypt hashrate with it
SPccminer was giving me around 400 with 1060 and KT is giving me more than 630


KTccminer-v8.17

Download, extract and copy it to /home/m1/KTccminer folder.
Please test and check before replacing your old version.

Change 0miner for the coins you want it to be the default miner.

Any one testing KlausT ccminer 8.17 please report your hashrate and changes to default miners so we can change the default miners if its better on those coins.
Thanks.

Just tested yourt KTccminer compiled instead of TPccminer and this is not functional for me.
i just replace TPccminer in command lines by KTccminer in 0miner file.

My rig entering in a loop ...

do I also have to modify the command line in the 0miner file with arguments other than TPcciminer!?

Lower the intensity ...

[papampi]

Help pls this is my error

Send a report pls

Code:

~/nvOC report

[l4ncel0t]

small patch for DUAL_ETH_LBC

--- 0miner.bkp   2017-12-24 08:09:48.475428820 -0700
+++ 0miner   2017-12-24 08:10:15.087492117 -0700
@@ -1175,7 +1175,7 @@
 
   ADDR="$LBC_ADDRESS.$LBC_WORKER"
 
-  screen -dmSL miner $HCD -epool $ETH_POOL:$ETH_PORT -ewal $ETHADDR -epsw x -dpool stratum+tcp://$LBCL_POOL:$LBC_PORT -dwal $ADDR -dpsw x -dcoin lbc -allcoins 1 -allpools 1 -dbg -1 $ETH_EXTENSION_ARGUMENTS
+  screen -dmSL miner $HCD -epool $ETH_POOL:$ETH_PORT -ewal $ETHADDR -epsw x -dpool stratum+tcp://$LBC_POOL:$LBC_PORT -dwal $ADDR -dpsw x -dcoin lbc -allcoins 1 -allpools 1 -dbg -1 $ETH_EXTENSION_ARGUMENTS
 fi
 
 if [ $COIN == "DUAL_ETH_SC" ]

[papampi]

small patch for DUAL_ETH_LBC

--- 0miner.bkp   2017-12-24 08:09:48.475428820 -0700
+++ 0miner   2017-12-24 08:10:15.087492117 -0700
@@ -1175,7 +1175,7 @@
 
   ADDR="$LBC_ADDRESS.$LBC_WORKER"
 
-  screen -dmSL miner $HCD -epool $ETH_POOL:$ETH_PORT -ewal $ETHADDR -epsw x -dpool stratum+tcp://$LBCL_POOL:$LBC_PORT -dwal $ADDR -dpsw x -dcoin lbc -allcoins 1 -allpools 1 -dbg -1 $ETH_EXTENSION_ARGUMENTS
+  screen -dmSL miner $HCD -epool $ETH_POOL:$ETH_PORT -ewal $ETHADDR -epsw x -dpool stratum+tcp://$LBC_POOL:$LBC_PORT -dwal $ADDR -dpsw x -dcoin lbc -allcoins 1 -allpools 1 -dbg -1 $ETH_EXTENSION_ARGUMENTS
 fi
 
 if [ $COIN == "DUAL_ETH_SC" ]

Thanks mate

[CryptAtomeTrader44]

Here is the Klaust ccminer v 8.17 compiled with cuda 8
So far I get so much better neoscrypt hashrate with it
SPccminer was giving me around 400 with 1060 and KT is giving me more than 630


KTccminer-v8.17

Download, extract and copy it to /home/m1/KTccminer folder.
Please test and check before replacing your old version.

Change 0miner for the coins you want it to be the default miner.

Any one testing KlausT ccminer 8.17 please report your hashrate and changes to default miners so we can change the default miners if its better on those coins.
Thanks.

Just tested yourt KTccminer compiled instead of TPccminer and this is not functional for me.
i just replace TPccminer in command lines by KTccminer in 0miner file.

My rig entering in a loop ...

do I also have to modify the command line in the 0miner file with arguments other than TPcciminer!?

Lower the intensity ...

i'll do later when i'm home.

teamviewer is convenient for visualization and some basic operations, but not really for changing code remotely let alone testing without starting scripts

Merry christmas all

[PovertyByte]

I gave this a try again and I got my OneBash file now, not sure why it was missing before.

When editing it I notice the entry for ZEC for example shows worker and address. If I am using a pool like suprnova or miningpoolhib I just have a worker so what am I doing with the address, and I don't even know where to enter the worker password?


Only other question is overclocking. With the GTX 1080 I can overclock the memory to 1,000 in MSI Afterburner but I know that if I used ASUS GPU Tweak the numbers are displayed differently due to a multiplier and number of memory modules stacked in the GPU. Is setting 1,000 for the memory OC in the OneBash the same as 1,000 in MSI Afterburner on windows?

[Temporel]

Here is the Klaust ccminer v 8.17 compiled with cuda 8
So far I get so much better neoscrypt hashrate with it
SPccminer was giving me around 400 with 1060 and KT is giving me more than 630


KTccminer-v8.17

Download, extract and copy it to /home/m1/KTccminer folder.
Please test and check before replacing your old version.

Change 0miner for the coins you want it to be the default miner.

Any one testing KlausT ccminer 8.17 please report your hashrate and changes to default miners so we can change the default miners if its better on those coins.
Thanks.

Just tested yourt KTccminer compiled instead of TPccminer and this is not functional for me.
i just replace TPccminer in command lines by KTccminer in 0miner file.

My rig entering in a loop ...

do I also have to modify the command line in the 0miner file with arguments other than TPcciminer!?

Lower the intensity ...

i'll do later when i'm home.

teamviewer is convenient for visualization and some basic operations, but not really for changing code remotely let alone testing without starting scripts

Merry christmas all

you dont like ssh ?

[Stubo]

I gave this a try again and I got my OneBash file now, not sure why it was missing before.

When editing it I notice the entry for ZEC for example shows worker and address. If I am using a pool like suprnova or miningpoolhib I just have a worker so what am I doing with the address, and I don't even know where to enter the worker password?


Only other question is overclocking. With the GTX 1080 I can overclock the memory to 1,000 in MSI Afterburner but I know that if I used ASUS GPU Tweak the numbers are displayed differently due to a multiplier and number of memory modules stacked in the GPU. Is setting 1,000 for the memory OC in the OneBash the same as 1,000 in MSI Afterburner on windows?

If you are running 19-2.0, the miner password is handled by this variable in 1bash:

Code:

MINER_PWD="x"               # Set the miner password. Default: x

As for OC settings, I don't have any 1080's but I do have 1070 and 1080 Ti's. These settings are a good starting point for both card on equihash:

Code:

__CORE_OVERCLOCK=125        # Global Core overclock for all GPU's if not using INDIVIDUAL settings

MEMORY_OVERCLOCK=1000        # Global Memory overclock for all GPU's if not using INDIVIDUAL settings

Hope this helps.

[killeriq]

regarding the 19.20 update

updating 2nd USB and taking ages to connect to dropbox...its updating like 2h already
dl is fast but till it connects actually ...
Is it due to slow dropbox service?

thx

Code:

--2017-12-24 15:08:12--  https://www.dropbox.com/s/c3ogj353mmaumua/KXccminer-skunk-2.2.tar.gz
Resolving www.dropbox.com (www.dropbox.com)... 2620:100:6021:1::a27d:4101, 162.125.65.1
Connecting to www.dropbox.com (www.dropbox.com)|2620:100:6021:1::a27d:4101|:443... failed: Connection timed out.
Connecting to www.dropbox.com (www.dropbox.com)|162.125.65.1|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://dl.dropboxusercontent.com/content_link/RzNHWxgbM1K4X4YQZEigg8KSMqVcbB4QDL480vfkhtwI16xnLVLExj4CcYt2bkOS/file [following]
--2017-12-24 15:10:21--  https://dl.dropboxusercontent.com/content_link/RzNHWxgbM1K4X4YQZEigg8KSMqVcbB4QDL480vfkhtwI16xnLVLExj4CcYt2bkOS/file
Resolving dl.dropboxusercontent.com (dl.dropboxusercontent.com)... 2620:100:6021:6::a27d:4106, 162.125.65.6
Connecting to dl.dropboxusercontent.com (dl.dropboxusercontent.com)|2620:100:6021:6::a27d:4106|:443... failed: Connection timed out.
Connecting to dl.dropboxusercontent.com (dl.dropboxusercontent.com)|162.125.65.6|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 59215892 (56M) [application/octet-stream]
Saving to: ‘KXccminer-skunk-2.2.tar.gz’

[leenoox]

I gave this a try again and I got my OneBash file now, not sure why it was missing before.

When editing it I notice the entry for ZEC for example shows worker and address. If I am using a pool like suprnova or miningpoolhib I just have a worker so what am I doing with the address, and I don't even know where to enter the worker password?


Only other question is overclocking. With the GTX 1080 I can overclock the memory to 1,000 in MSI Afterburner but I know that if I used ASUS GPU Tweak the numbers are displayed differently due to a multiplier and number of memory modules stacked in the GPU. Is setting 1,000 for the memory OC in the OneBash the same as 1,000 in MSI Afterburner on windows?

If you had memory set to +1000 in Afterburner on Windows and it worked stable, the equivalent value would be +2000 under linux. This is true for memory overclock only. You have to double the memory OC under linux.

The core overclock is equal. So if you had +100 core under windows, set it same +100 under linux.

Be careful when you set Power Limit (PL). In Afterburner the Power Limit is set in percentage (%), while under linux you have to set it in actual watts (W).
For example, if your card's maximum power limit is 200 watts and you had it set to 75% in Afterburner, under linux you will have to set your power limit to 150 watts for this example.

[joshuajones02]

I asked this previously but I cannot find it in the pages and tried using search with google on here:


What is the cmd to restart the mining services without having to reboot? Thank you

[papampi]

I asked this previously but I cannot find it in the pages and tried using search with google on here:


What is the cmd to restart the mining services without having to reboot? Thank you

On V0019-2.0:

Code:

miner-restart

Earlier versions:

Code:

pkill -f wdog
pkill -f 3main

[papampi]

Minimum Mining time causing problem in wtm auto switch,
And I cant find a fix for it
For now please disable it by updating to v0011

Code:

cd /home/m1/Downloads
wget https://www.dropbox.com/s/3fbrlv4t5js8xt7/wtm_update
bash /home/m1/Downloads/wtm_update

[JayneL]

Here is the Klaust ccminer v 8.17 compiled with cuda 8
So far I get so much better neoscrypt hashrate with it
SPccminer was giving me around 400 with 1060 and KT is giving me more than 630


KTccminer-v8.17

Download, extract and copy it to /home/m1/KTccminer folder.
Please test and check before replacing your old version.

Change 0miner for the coins you want it to be the default miner.

Any one testing KlausT ccminer 8.17 please report your hashrate and changes to default miners so we can change the default miners if its better on those coins.
Thanks.

Just tested yourt KTccminer compiled instead of TPccminer and this is not functional for me.
i just replace TPccminer in command lines by KTccminer in 0miner file.

My rig entering in a loop ...

do I also have to modify the command line in the 0miner file with arguments other than TPcciminer!?

Lower the intensity ...

Ok will try to lower intestity..

for the neoscrypt algo with 1060 what is ur OC settings to get 630 khs?

Oh KTccminer 8.17 not working on my Nvoc19 always screen is terminating

[papampi]

Here is the Klaust ccminer v 8.17 compiled with cuda 8
So far I get so much better neoscrypt hashrate with it
SPccminer was giving me around 400 with 1060 and KT is giving me more than 630


KTccminer-v8.17

Download, extract and copy it to /home/m1/KTccminer folder.
Please test and check before replacing your old version.

Change 0miner for the coins you want it to be the default miner.

Any one testing KlausT ccminer 8.17 please report your hashrate and changes to default miners so we can change the default miners if its better on those coins.
Thanks.

Just tested yourt KTccminer compiled instead of TPccminer and this is not functional for me.
i just replace TPccminer in command lines by KTccminer in 0miner file.

My rig entering in a loop ...

do I also have to modify the command line in the 0miner file with arguments other than TPcciminer!?

Lower the intensity ...

Ok will try to lower intestity..

for the neoscrypt algo with 1060 what is ur OC settings to get 630 khs?

Oh KTccminer 8.17 not working on my Nvoc19 always screen is terminating

Intensity 17
Power 70
OC 140
MC 600

[monck]

@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power
Do you have any ideas?

Code:

Worker: MINER1 
 Boot Time: 2017-12-21 17:07:29 
 System Up Time: up 3 days, 19 hours, 2 minutes 
 Miner Uptime:       16:08 
 Mining Coin: BTG 
 BTC Price: 11810 
 Reboot Required: No 
 GPU Count: 9 
 GPU Utilization: 
 100 100 100 99 100 100 95 100 100  
 Temp, Fan, Power: 
  
 
 Auto Switch: 
WTM Auto Switch Running   
 
 Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC
Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA
Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN
Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL
Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG 
 
WTM Current Profit: BTG:159 %
MONA:140 %
ZCL:122 %
ZEN:122 %
VTC:119 %
ZEC:117 % 
 
 WTM Current Revenue (EUR): BTG:40.31 
MONA:35.48 
ZCL:30.90 
ZEN:30.75 
VTC:30.16 
ZEC:29.69  
 
 24H Average Revenue:   36.3243 EUR 
  [32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m
 [32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m
 [32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m
 [32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m
 [32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m
 [32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m
 [32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m
 [32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m
 [32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m
CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main... 
  [1mWARNING: GPU 4 [0m,  [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
 [1mWARNING: GPU 4 [0m,  [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for  [1mGPU4 [0m [31m. Old Limit:  [1m180 [0m [31m New Limit:  [1m175 [0m [31m Fan speed:  [1m100 [0m
 [1mWARNING: GPU 4 [0m,  [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
 [1mWARNING: GPU 4 [0m,  [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for  [1mGPU4 [0m [31m. Old Limit:  [1m175 [0m [31m New Limit:  [1m170 [0m [31m Fan speed:  [1m100 [0m
 [1mWARNING: GPU 8 [0m,  [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
 [1mWARNING: GPU 8 [0m,  [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for  [1mGPU8 [0m [31m. Old Limit:  [1m180 [0m [31m New Limit:  [1m175 [0m [31m Fan speed:  [1m100 [0m
 [1mWARNING: GPU 4 [0m,  [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
 [1mWARNING: GPU 4 [0m,  [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for  [1mGPU4 [0m [31m. Old Limit:  [1m170 [0m [31m New Limit:  [1m165 [0m [31m Fan speed:  [1m100 [0m
 [1mWARNING: GPU 8 [0m,  [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
 [1mWARNING: GPU 8 [0m,  [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for  [1mGPU8 [0m [31m. Old Limit:  [1m175 [0m [31m New Limit:  [1m170 [0m [31m Fan speed:  [1m100 [0m