papampi
Full Member
 Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
 |
December 25, 2017, 07:29:31 AM |
|
Here is the Klaust ccminer v 8.17 compiled with cuda 8 So far I get so much better neoscrypt hashrate with it SPccminer was giving me around 400 with 1060 and KT is giving me more than 630 KTccminer-v8.17Download, extract and copy it to /home/m1/KTccminer folder. Please test and check before replacing your old version. Change 0miner for the coins you want it to be the default miner. Any one testing KlausT ccminer 8.17 please report your hashrate and changes to default miners so we can change the default miners if its better on those coins. Thanks. Just tested yourt KTccminer compiled instead of TPccminer and this is not functional for me. i just replace TPccminer in command lines by KTccminer in 0miner file. My rig entering in a loop ... do I also have to modify the command line in the 0miner file with arguments other than TPcciminer!? Lower the intensity ... Ok will try to lower intestity.. for the neoscrypt algo with 1060 what is ur OC settings to get 630 khs? Oh KTccminer 8.17 not working on my Nvoc19 always screen is terminating Intensity 17 Power 70 OC 140 MC 600 |
|
|
|
monck
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 25, 2017, 11:46:17 AM |
|
@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power Do you have any ideas? Worker: MINER1
Boot Time: 2017-12-21 17:07:29
System Up Time: up 3 days, 19 hours, 2 minutes
Miner Uptime: 16:08
Mining Coin: BTG
BTC Price: 11810
Reboot Required: No
GPU Count: 9
GPU Utilization:
100 100 100 99 100 100 95 100 100
Temp, Fan, Power:
Auto Switch:
WTM Auto Switch Running
Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC
Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA
Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN
Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL
Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG
WTM Current Profit: BTG:159 %
MONA:140 %
ZCL:122 %
ZEN:122 %
VTC:119 %
ZEC:117 %
WTM Current Revenue (EUR): BTG:40.31
MONA:35.48
ZCL:30.90
ZEN:30.75
VTC:30.16
ZEC:29.69
24H Average Revenue: 36.3243 EUR
[32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m
[32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m
[32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m
[32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m
[32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m
[32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m
[32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m
CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main...
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m170 [0m [31m New Limit: [1m165 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
|
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 25, 2017, 12:38:18 PM |
|
@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power Do you have any ideas? Worker: MINER1
Boot Time: 2017-12-21 17:07:29
System Up Time: up 3 days, 19 hours, 2 minutes
Miner Uptime: 16:08
Mining Coin: BTG
BTC Price: 11810
Reboot Required: No
GPU Count: 9
GPU Utilization:
100 100 100 99 100 100 95 100 100
Temp, Fan, Power:
Auto Switch:
WTM Auto Switch Running
Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC
Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA
Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN
Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL
Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG
WTM Current Profit: BTG:159 %
MONA:140 %
ZCL:122 %
ZEN:122 %
VTC:119 %
ZEC:117 %
WTM Current Revenue (EUR): BTG:40.31
MONA:35.48
ZCL:30.90
ZEN:30.75
VTC:30.16
ZEC:29.69
24H Average Revenue: 36.3243 EUR
[32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m
[32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m
[32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m
[32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m
[32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m
[32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m
[32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m
CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main...
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m170 [0m [31m New Limit: [1m165 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
Which version of nvOC you are using? It reads from temp control, does control enabled? |
|
|
|
monck
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 25, 2017, 01:07:43 PM |
|
19-2.0 with all latest patches
Miner_Temp_Control = YES
|
|
|
|
|
das0212
Newbie
Offline
Activity: 14
Merit: 0
|
|
December 25, 2017, 01:08:36 PM |
|
@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power Do you have any ideas? Worker: MINER1
Boot Time: 2017-12-21 17:07:29
System Up Time: up 3 days, 19 hours, 2 minutes
Miner Uptime: 16:08
Mining Coin: BTG
BTC Price: 11810
Reboot Required: No
GPU Count: 9
GPU Utilization:
100 100 100 99 100 100 95 100 100
Temp, Fan, Power:
Auto Switch:
WTM Auto Switch Running
Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC
Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA
Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN
Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL
Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG
WTM Current Profit: BTG:159 %
MONA:140 %
ZCL:122 %
ZEN:122 %
VTC:119 %
ZEC:117 %
WTM Current Revenue (EUR): BTG:40.31
MONA:35.48
ZCL:30.90
ZEN:30.75
VTC:30.16
ZEC:29.69
24H Average Revenue: 36.3243 EUR
[32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m
[32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m
[32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m
[32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m
[32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m
[32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m
[32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m
CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main...
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m170 [0m [31m New Limit: [1m165 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
Which version of nvOC you are using? It reads from temp control, does control enabled? Me too getting the samething...I am using nvoc 19.2.. i enabled temp control.. https://ibb.co/hrBv4m |
|
|
|
|
thaelin
Newbie
Offline
Activity: 64
Merit: 0
|
|
December 25, 2017, 02:04:55 PM |
|
I just updated from a fresh install of 1.4 to 2.0 via update. All went well and I decided to turn this machine (4 @ 1060) loose to switch with ETH ZEC BTG.
I am seeing all the output except the WTM profit check, guess it is still 8WTM. All is working great and switching ok. I have full output from temp control here.
Just want to know if I should be seeing the WTM script running in Quake? Did before I set auto-switch on..
Thanks thay
|
|
|
|
|
WaveFront
Member
Offline
Activity: 126
Merit: 10
|
|
December 25, 2017, 03:10:43 PM |
|
Hello,
For using a Raspberry Pi with an SRR board, which software do I have to run on the Raspberry Pi in order to work with the nvOC SRR script?
Cheers
|
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 25, 2017, 03:14:30 PM |
|
@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power Do you have any ideas? Worker: MINER1
Boot Time: 2017-12-21 17:07:29
System Up Time: up 3 days, 19 hours, 2 minutes
Miner Uptime: 16:08
Mining Coin: BTG
BTC Price: 11810
Reboot Required: No
GPU Count: 9
GPU Utilization:
100 100 100 99 100 100 95 100 100
Temp, Fan, Power:
Auto Switch:
WTM Auto Switch Running
Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC
Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA
Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN
Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL
Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG
WTM Current Profit: BTG:159 %
MONA:140 %
ZCL:122 %
ZEN:122 %
VTC:119 %
ZEC:117 %
WTM Current Revenue (EUR): BTG:40.31
MONA:35.48
ZCL:30.90
ZEN:30.75
VTC:30.16
ZEC:29.69
24H Average Revenue: 36.3243 EUR
[32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m
[32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m
[32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m
[32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m
[32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m
[32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m
[32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m
CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main...
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m170 [0m [31m New Limit: [1m165 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
Which version of nvOC you are using? It reads from temp control, does control enabled? Me too getting the samething...I am using nvoc 19.2.. i enabled temp control..  I think you both are running in local mode with older 3main Please run And check 3main version, if its not v0006 run the update script again to update it |
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 25, 2017, 03:15:35 PM |
|
I just updated from a fresh install of 1.4 to 2.0 via update. All went well and I decided to turn this machine (4 @ 1060) loose to switch with ETH ZEC BTG.
I am seeing all the output except the WTM profit check, guess it is still 8WTM. All is working great and switching ok. I have full output from temp control here.
Just want to know if I should be seeing the WTM script running in Quake? Did before I set auto-switch on..
Thanks thay
wtm profit check is a lite version of wtm auto switch and will not run if auto switch is running You should see wtm auto switch tab in guake terminal |
|
|
|
das0212
Newbie
Offline
Activity: 14
Merit: 0
|
|
December 25, 2017, 04:03:41 PM |
|
@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power Do you have any ideas? Worker: MINER1
Boot Time: 2017-12-21 17:07:29
System Up Time: up 3 days, 19 hours, 2 minutes
Miner Uptime: 16:08
Mining Coin: BTG
BTC Price: 11810
Reboot Required: No
GPU Count: 9
GPU Utilization:
100 100 100 99 100 100 95 100 100
Temp, Fan, Power:
Auto Switch:
WTM Auto Switch Running
Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC
Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA
Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN
Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL
Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG
WTM Current Profit: BTG:159 %
MONA:140 %
ZCL:122 %
ZEN:122 %
VTC:119 %
ZEC:117 %
WTM Current Revenue (EUR): BTG:40.31
MONA:35.48
ZCL:30.90
ZEN:30.75
VTC:30.16
ZEC:29.69
24H Average Revenue: 36.3243 EUR
[32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m
[32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m
[32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m
[32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m
[32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m
[32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m
[32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m
CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main...
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m170 [0m [31m New Limit: [1m165 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
Which version of nvOC you are using? It reads from temp control, does control enabled? Me too getting the samething...I am using nvoc 19.2.. i enabled temp control.. https://ibb.co/hrBv4mI think you both are running in local mode with older 3main Please run And check 3main version, if its not v0006 run the update script again to update it should i just copy 3main file.. or run the whole script |
|
|
|
|
|
joshuajones02
|
|
December 25, 2017, 05:33:01 PM |
|
I'm having issues with the 19-2 test release and network stability. Not sure quite sure what is going on and it has happened twice so far. My home router will lose internet connectivity after a period of time (12 hours first time, ~5 hours second time) since updating to the tested release. When I remove the wired connections (clients running 19-2) from my router that goes to the rigs the internet will immediately go back online. Not sure where to check for logs regarding this as the entire router (wifi and wired) loses internet connection. Version: nvOC_1bash_ver="v0019-2.0.001" # Do not edit this Is there a way to downgrade the client without imaging the hard drive/usb? Your issue can not be update problem as only some scripts changed, but all your old files are stored in /home/m1/backups/old_to19_2 This went on for 6 disconnects total, stumped I sent logs from my router to the manufacturer and fresh installed 19-1.4 on all of the machines that were updated and router has yet disconnected from internet. It's weird because it wasn't my modem, I'd try the connection from the modem directly and it worked fine but while the rigs with 19-2 on it, the internet would not work at all. Instead it would not work until all of the 19-2 rigs were either disconnected physically from the router or once all of them have been rebooted. I'm not worried about it, just letting you know or the community (Manufacturer's response was a copy/paste of crap newbie instructions of updating firmware and resetting to factory settings). I'll do a fresh install of version 19-2 when the official version is released on one of my machines and let it go for a few days and slowly update 1 by 1. I have heard of a similar problem before with Ubuntu: https://superuser.com/questions/183982/ubuntu-server-9-04-computer-freezes-the-entire-network-periodicallyAs far as I know, the only "changes" made in 19-2.0 that could be responsible for this are normal Ubuntu updates made in the upgrade script. As such, the next time you try the upgrade, change this line of the script and see if it resolves the issue: sudo -- sh -c 'apt update; apt upgrade -y; apt autoremove -y; apt autoclean -y; sudo apt install -y moreutils gawk'
to sudo -- sh -c 'sudo apt install -y moreutils gawk'
That will allow you to upgrade to 19-2.0 without updating the underlying Ubuntu OS. Let us know how it goes. Hey man, this worked. I tried another attempt at downloading the 19-2 full release on a few of the rigs, same exact problem happened, they kept taking my router offline. I can have 1 plugged in and that 1 machine will run fine, but the moment I plug in 2 rigs with the ubuntu updates, it'll take the router offline. Fix - I put nvOC 19-1.4 back on and then updated them with your suggestion and everything is running smoothly. Thank you Here's a question regarding telegram. The messages are working fine except that at the very bottom of the message it says: Critical: *Shows date & Time* - GPU Utilization is too low: restarting 3 main... But I login and check the terminal and everything seems to be running fine and no restarts have happened. This message is popping up at the bottom of every message from every rig online |
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 25, 2017, 05:36:52 PM |
|
I'm having issues with the 19-2 test release and network stability. Not sure quite sure what is going on and it has happened twice so far. My home router will lose internet connectivity after a period of time (12 hours first time, ~5 hours second time) since updating to the tested release. When I remove the wired connections (clients running 19-2) from my router that goes to the rigs the internet will immediately go back online. Not sure where to check for logs regarding this as the entire router (wifi and wired) loses internet connection. Version: nvOC_1bash_ver="v0019-2.0.001" # Do not edit this Is there a way to downgrade the client without imaging the hard drive/usb? Your issue can not be update problem as only some scripts changed, but all your old files are stored in /home/m1/backups/old_to19_2 This went on for 6 disconnects total, stumped I sent logs from my router to the manufacturer and fresh installed 19-1.4 on all of the machines that were updated and router has yet disconnected from internet. It's weird because it wasn't my modem, I'd try the connection from the modem directly and it worked fine but while the rigs with 19-2 on it, the internet would not work at all. Instead it would not work until all of the 19-2 rigs were either disconnected physically from the router or once all of them have been rebooted. I'm not worried about it, just letting you know or the community (Manufacturer's response was a copy/paste of crap newbie instructions of updating firmware and resetting to factory settings). I'll do a fresh install of version 19-2 when the official version is released on one of my machines and let it go for a few days and slowly update 1 by 1. I have heard of a similar problem before with Ubuntu: https://superuser.com/questions/183982/ubuntu-server-9-04-computer-freezes-the-entire-network-periodicallyAs far as I know, the only "changes" made in 19-2.0 that could be responsible for this are normal Ubuntu updates made in the upgrade script. As such, the next time you try the upgrade, change this line of the script and see if it resolves the issue: sudo -- sh -c 'apt update; apt upgrade -y; apt autoremove -y; apt autoclean -y; sudo apt install -y moreutils gawk'
to sudo -- sh -c 'sudo apt install -y moreutils gawk'
That will allow you to upgrade to 19-2.0 without updating the underlying Ubuntu OS. Let us know how it goes. Hey man, this worked. I tried another attempt at downloading the 19-2 full release on a few of the rigs, same exact problem happened, they kept taking my router offline. I can have 1 plugged in and that 1 machine will run fine, but the moment I plug in 2 rigs with the ubuntu updates, it'll take the router offline. Fix - I put nvOC 19-1.4 back on and then updated them with your suggestion and everything is running smoothly. Thank you Here's a question regarding telegram. The messages are working fine except that at the very bottom of the message it says: Critical: *Shows date & Time* - GPU Utilization is too low: restarting 3 main... But I login and check the terminal and everything seems to be running fine and no restarts have happened. This message is popping up at the bottom of every message from every rig online Run to clear old log files |
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 25, 2017, 05:38:31 PM |
|
@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power Do you have any ideas? Worker: MINER1
Boot Time: 2017-12-21 17:07:29
System Up Time: up 3 days, 19 hours, 2 minutes
Miner Uptime: 16:08
Mining Coin: BTG
BTC Price: 11810
Reboot Required: No
GPU Count: 9
GPU Utilization:
100 100 100 99 100 100 95 100 100
Temp, Fan, Power:
Auto Switch:
WTM Auto Switch Running
Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC
Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA
Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN
Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL
Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG
WTM Current Profit: BTG:159 %
MONA:140 %
ZCL:122 %
ZEN:122 %
VTC:119 %
ZEC:117 %
WTM Current Revenue (EUR): BTG:40.31
MONA:35.48
ZCL:30.90
ZEN:30.75
VTC:30.16
ZEC:29.69
24H Average Revenue: 36.3243 EUR
[32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m
[32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m
[32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m
[32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m
[32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m
[32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m
[32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m
CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main...
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m170 [0m [31m New Limit: [1m165 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
Which version of nvOC you are using? It reads from temp control, does control enabled? Me too getting the samething...I am using nvoc 19.2.. i enabled temp control.. I think you both are running in local mode with older 3main Please run And check 3main version, if its not v0006 run the update script again to update it should i just copy 3main file.. or run the whole script You can only replace 3main, but better run it to update other scripts too |
|
|
|
leetrongway
Newbie
Offline
Activity: 94
Merit: 0
|
|
December 25, 2017, 06:35:05 PM |
|
I don't understand what you mean by log into the terminal?
If you are refering to what is displayed at the top of the gnome-terminal when it auto launches at boot?
If so; don't enter anything: this is normal, the expect program will enter these automatically
|
|
|
|
|
arsen_a
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 25, 2017, 07:04:26 PM |
|
Hello,
For using a Raspberry Pi with an SRR board, which software do I have to run on the Raspberry Pi in order to work with the nvOC SRR script?
Cheers
Hello, Could you please explain what you want to do with Raspberry Pi and SRR board? Best, Arsen. |
|
|
|
|
Stubo
Member
Offline
Activity: 224
Merit: 13
|
|
December 25, 2017, 07:23:37 PM |
|
I'm having issues with the 19-2 test release and network stability. Not sure quite sure what is going on and it has happened twice so far. My home router will lose internet connectivity after a period of time (12 hours first time, ~5 hours second time) since updating to the tested release. When I remove the wired connections (clients running 19-2) from my router that goes to the rigs the internet will immediately go back online. Not sure where to check for logs regarding this as the entire router (wifi and wired) loses internet connection. Version: nvOC_1bash_ver="v0019-2.0.001" # Do not edit this Is there a way to downgrade the client without imaging the hard drive/usb? Your issue can not be update problem as only some scripts changed, but all your old files are stored in /home/m1/backups/old_to19_2 This went on for 6 disconnects total, stumped I sent logs from my router to the manufacturer and fresh installed 19-1.4 on all of the machines that were updated and router has yet disconnected from internet. It's weird because it wasn't my modem, I'd try the connection from the modem directly and it worked fine but while the rigs with 19-2 on it, the internet would not work at all. Instead it would not work until all of the 19-2 rigs were either disconnected physically from the router or once all of them have been rebooted. I'm not worried about it, just letting you know or the community (Manufacturer's response was a copy/paste of crap newbie instructions of updating firmware and resetting to factory settings). I'll do a fresh install of version 19-2 when the official version is released on one of my machines and let it go for a few days and slowly update 1 by 1. I have heard of a similar problem before with Ubuntu: https://superuser.com/questions/183982/ubuntu-server-9-04-computer-freezes-the-entire-network-periodicallyAs far as I know, the only "changes" made in 19-2.0 that could be responsible for this are normal Ubuntu updates made in the upgrade script. As such, the next time you try the upgrade, change this line of the script and see if it resolves the issue: sudo -- sh -c 'apt update; apt upgrade -y; apt autoremove -y; apt autoclean -y; sudo apt install -y moreutils gawk'
to sudo -- sh -c 'sudo apt install -y moreutils gawk'
That will allow you to upgrade to 19-2.0 without updating the underlying Ubuntu OS. Let us know how it goes. Hey man, this worked. I tried another attempt at downloading the 19-2 full release on a few of the rigs, same exact problem happened, they kept taking my router offline. I can have 1 plugged in and that 1 machine will run fine, but the moment I plug in 2 rigs with the ubuntu updates, it'll take the router offline. Fix - I put nvOC 19-1.4 back on and then updated them with your suggestion and everything is running smoothly. Thank you Thanks for letting us know. I am glad it worked for you. I don't run telegram [yet] so I can't be of assistance there. |
|
|
|
|
WaveFront
Member
Offline
Activity: 126
Merit: 10
|
|
December 25, 2017, 08:05:08 PM |
|
For downloading the full image of the community release, is the mega.nz link the only one?
Is there by any chance a torrent?
|
|
|
|
|
monck
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 25, 2017, 09:28:39 PM |
|
@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power Do you have any ideas? Worker: MINER1
Boot Time: 2017-12-21 17:07:29
System Up Time: up 3 days, 19 hours, 2 minutes
Miner Uptime: 16:08
Mining Coin: BTG
BTC Price: 11810
Reboot Required: No
GPU Count: 9
GPU Utilization:
100 100 100 99 100 100 95 100 100
Temp, Fan, Power:
Auto Switch:
WTM Auto Switch Running
Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC
Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA
Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN
Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL
Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG
WTM Current Profit: BTG:159 %
MONA:140 %
ZCL:122 %
ZEN:122 %
VTC:119 %
ZEC:117 %
WTM Current Revenue (EUR): BTG:40.31
MONA:35.48
ZCL:30.90
ZEN:30.75
VTC:30.16
ZEC:29.69
24H Average Revenue: 36.3243 EUR
[32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m
[32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m
[32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m
[32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m
[32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m
[32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m
[32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m
CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main...
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m170 [0m [31m New Limit: [1m165 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
Which version of nvOC you are using? It reads from temp control, does control enabled? And check 3main version, if its not v0006 run the update script again to update it
You were right, 3main was 005 I updated with the update script to 006 and everything working fine - THANKS! |
|
|
|
|
chem1990
Newbie
Offline
Activity: 12
Merit: 0
|
|
December 25, 2017, 10:27:28 PM |
|
Hello everyone.
I want just to say thanks to anyone who makes our lives easier with this great distro...
I noticed a problem/bug with the community build. it was working great on ast Fullzero release 1.4 and i'm talking about wi-fi networking. Yes i'm using one rig with wi fi for obvious resons, and it was working great (tp-link 722n - chipset rtl8801eu), but since i made the update to community build the wi fi after every restart just hangs, stops working. usb stick isnt recognized. if i take it out of usb and reconnect everything starts working.
any idea what could be or what to do. can anyone take a look. maybe some boot priority for usb drivers?
thx
Can you check and see if vbrick solution for his mouse works for you too or not ? Hello just to inform you that the solution for usb mouse worked with usb wifi too. now everything works much smoother. i have a question. Is there any way to mine BWK (bulwark) with nvoc? thx |
|
|
|
|
JayneL
Member
Offline
Activity: 104
Merit: 10
|
|
December 26, 2017, 03:36:55 AM |
|
Here is the Klaust ccminer v 8.17 compiled with cuda 8 So far I get so much better neoscrypt hashrate with it SPccminer was giving me around 400 with 1060 and KT is giving me more than 630 KTccminer-v8.17Download, extract and copy it to /home/m1/KTccminer folder. Please test and check before replacing your old version. Change 0miner for the coins you want it to be the default miner. Any one testing KlausT ccminer 8.17 please report your hashrate and changes to default miners so we can change the default miners if its better on those coins. Thanks. Just tested yourt KTccminer compiled instead of TPccminer and this is not functional for me. i just replace TPccminer in command lines by KTccminer in 0miner file. My rig entering in a loop ... do I also have to modify the command line in the 0miner file with arguments other than TPcciminer!? Lower the intensity ... Ok will try to lower intestity.. for the neoscrypt algo with 1060 what is ur OC settings to get 630 khs? Oh KTccminer 8.17 not working on my Nvoc19 always screen is terminating Intensity 17 Power 70 OC 140 MC 600 Still not working on the new KTccminer u link above. tnx for the help i hope we can make it work i'm using the stable nvoc 19 |
|
|
|
|
|
