scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 27, 2018, 05:13:26 AM |
|
SORRY TO HEAR ABOUT YOUR MOONLANDER--
Did you do any adjustments to the Core voltage pot? I just got my MLD and have not touched the voltage pots. It does OK on 700Hz frequency on stock settings but hardware errors get big at 720Hz.
Just asking before I touch the pots. I am going steady at 3.9 MH/s at stock settings, 700Hz frequency. I am running a single stick on a USB 3.0 port of the PC, running Ubuntu 18.04.
Thanks for any help. --scryptr
P.S. Looks like a piece of Astroturf was pitched in the trash. Good riddance! (spam post was deleted). -scryptr
|
|
|
|
Hintsal
Newbie
Offline
Activity: 42
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 27, 2018, 03:39:45 PM |
|
SORRY TO HEAR ABOUT YOUR MOONLANDER--
Did you do any adjustments to the Core voltage pot? I just got my MLD and have not touched the voltage pots. It does OK on 700Hz frequency on stock settings but hardware errors get big at 720Hz.
Just asking before I touch the pots. I am going steady at 3.9 MH/s at stock settings, 700Hz frequency. I am running a single stick on a USB 3.0 port of the PC, running Ubuntu 18.04.
Thanks for any help. --scryptr
P.S. Looks like a piece of Astroturf was pitched in the trash. Good riddance! (spam post was deleted). -scryptr
Never touched the pots. Just ran it as usual in a powered USB strip. I'm just super unlucky. Mine screamed like a banshee after a few weeks I couldn't stand it and removed the fan. Then added 2 external fans. It ran cooler that way and much more stable. Then it decided it was done hashing. Le sigh.
|
|
|
|
Bitfort
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 952
Merit: 339
invest trade and gamble wisely
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 27, 2018, 04:50:28 PM |
|
SORRY TO HEAR ABOUT YOUR MOONLANDER--
Did you do any adjustments to the Core voltage pot? I just got my MLD and have not touched the voltage pots. It does OK on 700Hz frequency on stock settings but hardware errors get big at 720Hz.
Just asking before I touch the pots. I am going steady at 3.9 MH/s at stock settings, 700Hz frequency. I am running a single stick on a USB 3.0 port of the PC, running Ubuntu 18.04.
Thanks for any help. --scryptr
P.S. Looks like a piece of Astroturf was pitched in the trash. Good riddance! (spam post was deleted). -scryptr
Never touched the pots. Just ran it as usual in a powered USB strip. I'm just super unlucky. Mine screamed like a banshee after a few weeks I couldn't stand it and removed the fan. Then added 2 external fans. It ran cooler that way and much more stable. Then it decided it was done hashing. Le sigh. Yea, the fans were really bad. But jstefanop said they were cheap. So either these or some more expensive which would naturally reflect in miner price. I removed fans after few weeks and also using external one. But miners works like a charm almost a year 24/7. So except the fans it's rock solid design IMO. Honestly I was quite sure this won't make me profit (espeially because I used BTC for purchase). Just wanted to have some ... you know, maybe one day they'll be collectibles. @scryptr: I did some small pot adjustment. The final setting is bit different for each stick. Default freq. is 600 (so HW err. at 720 without pot adj. is ... quite expectable).
|
MY HINTs ◄M► MINING ◄G► GAMBLING ◄E► EXCHANGE
| ◄E► (KCS) Kucoin-Staking, Auto-Lending, Trading-Bot ◄E► (BNB) Binance-Staking, Savings, 10% RefBack ◄E► (TRX) Poloniex-Staking, Lending, Fee Discount ◄E► (LEO) Bitfinex-Staking, Auto-Lending
| ◄G► Betfury-Faucet, Dividend Earnings (BFG holders, mine BFG by playing) ◄G► Bitvest - Faucet, Bankroll Invest ◄G► CryptoGames-Faucet, Lotto ◄G► PrimeDice-Faucet
| ◄M► Prohashing (Multipool)-Payout in any coin, get 0.50% bonus for 30 days ◄M► MiningRigRentals (Marketplace)-buy hashrate or rent your miners ◄M► Viabtc (Pool)-payout to Coinex (exchnage) without fees
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 27, 2018, 04:52:51 PM |
|
i have one that is consistently slower than the other ones. i haven't adjusted anything, should i try for the core or memory? im running them at speed 796. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm2.staticflickr.com%2F1940%2F44231830504_3ec6e1a81d_h.jpg&t=665&c=l1xP_H8gO981dQ)
|
|
|
|
Bitfort
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 952
Merit: 339
invest trade and gamble wisely
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 27, 2018, 05:01:32 PM Last edit: September 27, 2018, 05:15:28 PM by Bitfort |
|
i have one that is consistently slower than the other ones. i haven't adjusted anything, should i try for the core or memory? im running them at speed 796. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm2.staticflickr.com%2F1940%2F44231830504_3ec6e1a81d_h.jpg&t=665&c=l1xP_H8gO981dQ) Definitely should tinker all of them. You have 35%-40% HW error rate !!! ( HW are hardware errors) ... your miners are actually working only 60 - 65% capacity) I'm keeping HW under 3%. EDIT: Read the OP. There is guide how to test them (using --benchmark flag).
|
MY HINTs ◄M► MINING ◄G► GAMBLING ◄E► EXCHANGE
| ◄E► (KCS) Kucoin-Staking, Auto-Lending, Trading-Bot ◄E► (BNB) Binance-Staking, Savings, 10% RefBack ◄E► (TRX) Poloniex-Staking, Lending, Fee Discount ◄E► (LEO) Bitfinex-Staking, Auto-Lending
| ◄G► Betfury-Faucet, Dividend Earnings (BFG holders, mine BFG by playing) ◄G► Bitvest - Faucet, Bankroll Invest ◄G► CryptoGames-Faucet, Lotto ◄G► PrimeDice-Faucet
| ◄M► Prohashing (Multipool)-Payout in any coin, get 0.50% bonus for 30 days ◄M► MiningRigRentals (Marketplace)-buy hashrate or rent your miners ◄M► Viabtc (Pool)-payout to Coinex (exchnage) without fees
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 27, 2018, 05:24:49 PM |
|
i have one that is consistently slower than the other ones. i haven't adjusted anything, should i try for the core or memory? im running them at speed 796. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm2.staticflickr.com%2F1940%2F44231830504_3ec6e1a81d_h.jpg&t=665&c=l1xP_H8gO981dQ) Definitely should tinker all of them. You have 35%-40% HW error rate !!! ( HW are hardware errors) ... your miners are actually working only 60 - 65% capacity) I'm keeping HW under 3%. EDIT: Read the OP. There is guide how to test them (using --benchmark flag). the hw rate on minera is calculated by accepted vs error. its not accurate. im running on a solo pool with very high worker diff.. so the accepted will be a low number compare to hwe in bfgminer log its only 1.5% [2018-09-27 19:24:18] 20s:34.65 avg:34.79 u:33.88 Mh/s | A:64840 R:230+0(.35%) HW:40689/1.5% ive tried speed 756 and 768 and it still is the same.
|
|
|
|
Bitfort
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 952
Merit: 339
invest trade and gamble wisely
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 27, 2018, 05:45:16 PM |
|
i have one that is consistently slower than the other ones. i haven't adjusted anything, should i try for the core or memory? im running them at speed 796. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm2.staticflickr.com%2F1940%2F44231830504_3ec6e1a81d_h.jpg&t=665&c=l1xP_H8gO981dQ) Definitely should tinker all of them. You have 35%-40% HW error rate !!! ( HW are hardware errors) ... your miners are actually working only 60 - 65% capacity) I'm keeping HW under 3%. EDIT: Read the OP. There is guide how to test them (using --benchmark flag). the hw rate on minera is calculated by accepted vs error. its not accurate. im running on a solo pool with very high worker diff.. so the accepted will be a low number compare to hwe in bfgminer log its only 1.5% [2018-09-27 19:24:18] 20s:34.65 avg:34.79 u:33.88 Mh/s | A:64840 R:230+0(.35%) HW:40689/1.5% ive tried speed 756 and 768 and it still is the same. Then it's ok. Suprised you can go that high. Might be some lucky batch. About the one miner try this: I was running Moonlander 2 for a couple of weeks, from internal USB of the laptop and had stable 4.7MHz/s speed at 832 freq. Now, I got a good quality 2A USB hub. I put the core voltage slightly up and frequency 852. For a couple of hours it gave me speed of 4.9MHz/s and then stopped. I put the voltage back to previous position but now, no matter what frequency I put I get a speed of 3.1-2.4 MHz. Anybody knows how to check if I damaged the device? E.g. is there a way to check number of alive cores?
Thanks!
Put "-D 2>log.txt" at the end of the bat command. Start it up and it will spit out the log.txt file in same directory. In there you will see startup sequence and it checks for number of active cores. Should say 64.
|
MY HINTs ◄M► MINING ◄G► GAMBLING ◄E► EXCHANGE
| ◄E► (KCS) Kucoin-Staking, Auto-Lending, Trading-Bot ◄E► (BNB) Binance-Staking, Savings, 10% RefBack ◄E► (TRX) Poloniex-Staking, Lending, Fee Discount ◄E► (LEO) Bitfinex-Staking, Auto-Lending
| ◄G► Betfury-Faucet, Dividend Earnings (BFG holders, mine BFG by playing) ◄G► Bitvest - Faucet, Bankroll Invest ◄G► CryptoGames-Faucet, Lotto ◄G► PrimeDice-Faucet
| ◄M► Prohashing (Multipool)-Payout in any coin, get 0.50% bonus for 30 days ◄M► MiningRigRentals (Marketplace)-buy hashrate or rent your miners ◄M► Viabtc (Pool)-payout to Coinex (exchnage) without fees
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 27, 2018, 08:30:43 PM |
|
SORRY TO HEAR ABOUT YOUR MOONLANDER--
Did you do any adjustments to the Core voltage pot? I just got my MLD and have not touched the voltage pots. It does OK on 700Hz frequency on stock settings but hardware errors get big at 720Hz.
Just asking before I touch the pots. I am going steady at 3.9 MH/s at stock settings, 700Hz frequency. I am running a single stick on a USB 3.0 port of the PC, running Ubuntu 18.04.
Thanks for any help. --scryptr
P.S. Looks like a piece of Astroturf was pitched in the trash. Good riddance! (spam post was deleted). -scryptr
Never touched the pots. Just ran it as usual in a powered USB strip. I'm just super unlucky. Mine screamed like a banshee after a few weeks I couldn't stand it and removed the fan. Then added 2 external fans. It ran cooler that way and much more stable. Then it decided it was done hashing. Le sigh. Shoot me a message...I have had almost zero failures reported from all of these shipped, so I'm always curious on what fails on these over a really long time. Would be interested in getting yours to dissect.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 27, 2018, 08:33:43 PM |
|
i have one that is consistently slower than the other ones. i haven't adjusted anything, should i try for the core or memory? im running them at speed 796. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm2.staticflickr.com%2F1940%2F44231830504_3ec6e1a81d_h.jpg&t=665&c=l1xP_H8gO981dQ) Definitely should tinker all of them. You have 35%-40% HW error rate !!! ( HW are hardware errors) ... your miners are actually working only 60 - 65% capacity) I'm keeping HW under 3%. EDIT: Read the OP. There is guide how to test them (using --benchmark flag). the hw rate on minera is calculated by accepted vs error. its not accurate. im running on a solo pool with very high worker diff.. so the accepted will be a low number compare to hwe in bfgminer log its only 1.5% [2018-09-27 19:24:18] 20s:34.65 avg:34.79 u:33.88 Mh/s | A:64840 R:230+0(.35%) HW:40689/1.5% ive tried speed 756 and 768 and it still is the same. Then it's ok. Suprised you can go that high. Might be some lucky batch. About the one miner try this: I was running Moonlander 2 for a couple of weeks, from internal USB of the laptop and had stable 4.7MHz/s speed at 832 freq. Now, I got a good quality 2A USB hub. I put the core voltage slightly up and frequency 852. For a couple of hours it gave me speed of 4.9MHz/s and then stopped. I put the voltage back to previous position but now, no matter what frequency I put I get a speed of 3.1-2.4 MHz. Anybody knows how to check if I damaged the device? E.g. is there a way to check number of alive cores?
Thanks!
Put "-D 2>log.txt" at the end of the bat command. Start it up and it will spit out the log.txt file in same directory. In there you will see startup sequence and it checks for number of active cores. Should say 64. Yea I don't know why minera does not pull the HW error rate % directly from the miner instead of doing its own wrong calculation. I should probably update the driver to normalize the error shares based on the difficulty its mining (each HW error is hardwired to the internal ASIC difficulty which is very low).
|
|
|
|
shadesign
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 30, 2018, 10:24:04 AM |
|
hi all,
I have a question, I'm newbie and I have, I think a little problem with my ML2 usb stick when I plug (on my laptop, not usb hub) and start the fan does not activate... and in the pool I lose mhs as time goes by. it's comes from power ?
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 30, 2018, 09:42:33 PM |
|
hi all,
I have a question, I'm newbie and I have, I think a little problem with my ML2 usb stick when I plug (on my laptop, not usb hub) and start the fan does not activate... and in the pool I lose mhs as time goes by. it's comes from power ?
THE FAN SHOULD SPIN-- Even in a USB 2.0 port, the fan should spin. Without it, the ASIC may become damaged. Is the fan plugged in to the micro-molex? Are the fan wires damaged? Is there a particle interfering with the fan blades? Check the close-up photos in the beginning of thread. --scryptr
|
|
|
|
shadesign
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 01, 2018, 11:27:54 AM |
|
I checked, everything is ok, absolutely nothing happens...
|
|
|
|
shadesign
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 01, 2018, 05:41:40 PM |
|
hi all,
I have a question, I'm newbie and I have, I think a little problem with my ML2 usb stick when I plug (on my laptop, not usb hub) and start the fan does not activate... and in the pool I lose mhs as time goes by. it's comes from power ?
THE FAN SHOULD SPIN-- Even in a USB 2.0 port, the fan should spin. Without it, the ASIC may become damaged. Is the fan plugged in to the micro-molex? Are the fan wires damaged? Is there a particle interfering with the fan blades? Check the close-up photos in the beginning of thread. --scryptr https://ibb.co/nMAu8ehttps://ibb.co/efdE8ethe fan connector mounted correctly?
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 01, 2018, 10:19:32 PM |
|
hi all,
I have a question, I'm newbie and I have, I think a little problem with my ML2 usb stick when I plug (on my laptop, not usb hub) and start the fan does not activate... and in the pool I lose mhs as time goes by. it's comes from power ?
THE FAN SHOULD SPIN-- Even in a USB 2.0 port, the fan should spin. Without it, the ASIC may become damaged. Is the fan plugged in to the micro-molex? Are the fan wires damaged? Is there a particle interfering with the fan blades? Check the close-up photos in the beginning of thread. --scryptr ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fibb.co%2FnMAu8e&t=665&c=NbfGmf1p2n1WgA) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fibb.co%2FefdE8e&t=665&c=YzyggUmAHujolQ) the fan connector mounted correctly? Try unscrewing the fan and seeing if it spins when you plug it in...could be that it was tighten too much and was stuck. Either way if you ran it for a lengthy time without the fan running you have most likely damaged the ASIC beyond repair.
|
|
|
|
shadesign
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 01, 2018, 11:11:08 PM |
|
hi all,
I have a question, I'm newbie and I have, I think a little problem with my ML2 usb stick when I plug (on my laptop, not usb hub) and start the fan does not activate... and in the pool I lose mhs as time goes by. it's comes from power ?
THE FAN SHOULD SPIN-- Even in a USB 2.0 port, the fan should spin. Without it, the ASIC may become damaged. Is the fan plugged in to the micro-molex? Are the fan wires damaged? Is there a particle interfering with the fan blades? Check the close-up photos in the beginning of thread. --scryptr https://ibb.co/nMAu8ehttps://ibb.co/efdE8ethe fan connector mounted correctly? Try unscrewing the fan and seeing if it spins when you plug it in...could be that it was tighten too much and was stuck. Either way if you ran it for a lengthy time without the fan running you have most likely damaged the ASIC beyond repair. No I just use for few minutes but nothing happened I think I will return the article for replace it
|
|
|
|
Hintsal
Newbie
Offline
Activity: 42
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 02, 2018, 10:44:39 AM |
|
hi all,
I have a question, I'm newbie and I have, I think a little problem with my ML2 usb stick when I plug (on my laptop, not usb hub) and start the fan does not activate... and in the pool I lose mhs as time goes by. it's comes from power ?
THE FAN SHOULD SPIN-- Even in a USB 2.0 port, the fan should spin. Without it, the ASIC may become damaged. Is the fan plugged in to the micro-molex? Are the fan wires damaged? Is there a particle interfering with the fan blades? Check the close-up photos in the beginning of thread. --scryptr https://ibb.co/nMAu8ehttps://ibb.co/efdE8ethe fan connector mounted correctly? Try unscrewing the fan and seeing if it spins when you plug it in...could be that it was tighten too much and was stuck. Either way if you ran it for a lengthy time without the fan running you have most likely damaged the ASIC beyond repair. Sent you a pm. Thanks for everything.
|
|
|
|
Hintsal
Newbie
Offline
Activity: 42
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 05, 2018, 11:13:08 AM |
|
hi all,
I have a question, I'm newbie and I have, I think a little problem with my ML2 usb stick when I plug (on my laptop, not usb hub) and start the fan does not activate... and in the pool I lose mhs as time goes by. it's comes from power ?
THE FAN SHOULD SPIN-- Even in a USB 2.0 port, the fan should spin. Without it, the ASIC may become damaged. Is the fan plugged in to the micro-molex? Are the fan wires damaged? Is there a particle interfering with the fan blades? Check the close-up photos in the beginning of thread. --scryptr https://ibb.co/nMAu8ehttps://ibb.co/efdE8ethe fan connector mounted correctly? Try unscrewing the fan and seeing if it spins when you plug it in...could be that it was tighten too much and was stuck. Either way if you ran it for a lengthy time without the fan running you have most likely damaged the ASIC beyond repair. Sent you a pm. Thanks for everything. Did you get my pm?
|
|
|
|
Adriano2010
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 07, 2018, 10:41:53 AM |
|
Is there any problem with this "MLD 7" ? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.postimg.cc%2FzBrmHS4Z%2Fminings.png&t=665&c=47Rz6jd0xAcw9Q) What is (44%)? Can the power drops affect this usb MLD's over time? This month the company who provide power, working on network and will change old power poles and some transformers.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 08, 2018, 07:08:17 AM |
|
Is there any problem with this "MLD 7" ? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.postimg.cc%2FzBrmHS4Z%2Fminings.png&t=665&c=47Rz6jd0xAcw9Q) What is (44%)? Can the power drops affect this usb MLD's over time? This month the company who provide power, working on network and will change old power poles and some transformers. the rejects are duplicate shares not hardware errors.. id ignore it.. the accepted is within the others.. so its not losing any speed.
|
|
|
|
CryptoBarry
Newbie
Offline
Activity: 9
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 15, 2018, 03:09:42 PM |
|
Hi, i have a problem with my moonlander 2. I have a Raspberry Pi3 and 2 Moonlander2 on a 20W powered hub. After a bit of work, one of the two moonlander go to 0 Mhz. Sometimes after 10minutes, sometimes after 48 hours of good work. I try to reset raspberry and change the hub with another one but the problem persists. I try to change the frequencies from 600 to 796 but the problem persists, i don't change any voltage. Do you have any advice? Thank you. https://preview.ibb.co/iGTQrL/raspimining-LI.jpg
|
|
|
|
|