PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[PhoenixMiner]

@Phoenixminer: the 5.2a will compatible with the ETCHASH?

  We will add support for the new ETC variant of ethash (with reduced DAG size after epoch 390) in the stable version of 5.2, it is not included in 5.2a yet, but there is still at least three weeks before ETC reaches epoch 390.

guys.

all 4gb cards can't mining anymore

 Download PhoenixMiner 5.2, add the command-line parameters -daglim 1 -dagrestart 1 (also may try -rxboost 1 for additional boost). The hashrate will be lower but that's unavoidable. It is also important to use auto-tune (do not specify -gt values) because the optimal -gt value may change with each new epoch, and will definitely be different than before. For maximum performance, you can try manually adjusting the -daglim value (the default -daglim 1 corresponds to 4006 MB DAG limit). Some cards will work with higher values like -daglim 4011.

Linux ETH can mine till when ?

   Should be ok until epoch 380-383 then you can use -daglim as in Windows.

3 cards
5700XT, 5700, 480 4GB

PhoenixMiner 5.2a ~19 Mhs with -daglim 3967, any greater daglim produces a hashrate drop to 0-1 Mhs

If I use PhoenixMiner for the 5700 and Lolminer with 480 it makes 30,31Mhs

Driver 20.8.1, Windows.

Any suggestion?

    Add -dagrestart 1 and you should be able to use -daglim 4005 to -daglim 4011 depending on the card, which will greatly increase the hashrate. Also, you must use auto-tune (do not specify -gt values) because the optimal -gt value may change with each new epoch, and will definitely be different than before. Finally, the new -rxboost option (just add -rxboost 1) may provide some small additional boost.

[1714837691]

1714837691

[1714837691]

1714837691

[miner29]

guys.

all 4gb cards can't mining anymore

Mine are all running just fine...on eth...on linux...30 some odd 4gb 570s
Mine rigs are on 5.0e and one is 5.1c.

So appears soon i will need to update the miner. 

Linux ETH can mine till when ?

No idea.... watching one of the rigs now.  4 x 570x4gb 2x570x8gb (they are gpu 5/6 in the rig) is hashing happily away on 5.0e and doing (30.273/31.131/31.130/31.120/29.925/29.929mh) with volt set to 825 on each and 1145 cor 2100 mem....

I dont usually update miner unless problem or major improvement.

[Bael]

Hi

Using PhoenixMiner 5.2a version

Trying to mine ETC with 8GB gpus gives error, I go back to the previous version for ETC, without using rxboost xDD

I have tried applying -straps to rx 580 8gb in admin mode but it doesn't work, should it work?

I'm sorry, I write very bad english

[adaseb]

Epoch 383? Are you sure that's even possible. With all the testing I did, I could only get it to work on Epoch 379. Some people ciaimed that it works on Epoch 380 however I get an insta-hang whenever I try and benchmark it at that level. This is under Ubuntu.

What paramaters are you using to get 383? Do you have some -eres which is similar to Claymores where it loads a few dags in advance to reduce the chances of hanging? Or do you have some 8GB GPU in the main slot and that's why you are able to mine to 383 with your other 4GB which are in the other secondary slots? Do you plan on updating your miner so it can mine >4GB DAG with reduced speeds like lolminer is doing?

[MostWanted]

SAPPHIRE RX 560 4GB Hynix

PhoenixMiner 5.2a

374 epoch

rxboost 1:
13.3 MH/s

rxboost 1 + daglim 1:
10.9 MH/s

Don't use daglim with RX560. It's works without daglim beter.

[crypto.bin101]

Using PhoenixMiner 5.2a version with parameters  -daglim 1 and -dagrestart 1.

Windows 10 Pro
1pc RX580 8GB in primary pcie
6pc RX570 4GB ELLESMERE (SAMSUNG)
4GB RAM
GPU Driver Adrenalin 2019 19.75

https://ibb.co/TLKRMQ4

The 4GB mine at 1/mhs. Will the GPU still able to mine at 2x/mhs ?

[abg00]

    Add -dagrestart 1 and you should be able to use -daglim 4005 to -daglim 4011 depending on the card, which will greatly increase the hashrate. Also, you must use auto-tune (do not specify -gt values) because the optimal -gt value may change with each new epoch, and will definitely be different than before. Finally, the new -rxboost option (just add -rxboost 1) may provide some small additional boost.

plz add strap and rxboost for navi gddr6 card

[csoky]

3 cards
5700XT, 5700, 480 4GB

PhoenixMiner 5.2a ~19 Mhs with -daglim 3967, any greater daglim produces a hashrate drop to 0-1 Mhs

If I use PhoenixMiner for the 5700 and Lolminer with 480 it makes 30,31Mhs

Driver 20.8.1, Windows.

Any suggestion?

The RX 580 4GB mining on Win10 about 27,5 Mhs with "-daglim 1 -dagrestart 1"
if I add "-rxboost 1" then works with ~27,5 Mhs too.

Any other experience?

[UniJo]

I got problems adding -straps to my 2 Vega 64. When i try to run PM as administrator, the PhoenixMiner.exe is not recognized. When i set EIO.exe to run as administrator and start PM normally, i get strap error A740.

[hbk2004v1]

3 cards
5700XT, 5700, 480 4GB

PhoenixMiner 5.2a ~19 Mhs with -daglim 3967, any greater daglim produces a hashrate drop to 0-1 Mhs

If I use PhoenixMiner for the 5700 and Lolminer with 480 it makes 30,31Mhs

Driver 20.8.1, Windows.

Any suggestion?

The RX 580 4GB mining on Win10 about 27,5 Mhs with "-daglim 1 -dagrestart 1"
if I add "-rxboost 1" then works with ~27,5 Mhs too.

Any other experience?

RX 470 4GB sapphire mining on Win10 Getting 28,2 Mhs with "-daglim 1 -dagrestart 1" on PhoenixMiner 5.2a This is a lot lower than with lolminer i get 31.01 mh/s

Even worse with RX 470 samsung memory 4GB i get 26.1 mh/s  with "-daglim 1 -dagrestart 1 on PhoenixMiner 5.2a, 28.4 mh/s with lolminer

[agismaniax]

I have two rx vega 56 installed on Windows  10 Pro build 2004 with adrenalin 24.0.1. I run the miner and show the opencl error. I already DDU with no good result. How to fix that?

https://imgur.com/WkfcAdO

[sys2007]

Using WIN 10
5.2A, Ethermine, Etherium, driver  20.5.2
RX5500 4 Gb card, together with -daglim 1 gives out only 3MH!
Will there be support for 5500 4Gb cards?

[Dowper_]

-cdmport is not working in the new version...

It is working fine here (read-only access).


CMD-Line used:
PhoenixMiner.exe -amd -eres 1 -mi 12 -pool DAGGERHASHIMOTO.eu.nicehash.com:3353 -wal ************************.********** -pass x -proto 4 -log 0 -wdog 0 -cdmport 4001 -gpus 2

On latest 5.2a version it's not working.

[vydelek]

PLEAS HELP: verze 5.2a PROBLEM ETC - 8 GPU 8GB

2020.11.09:11:30:45.272: main Phoenix Miner 5.2a Windows/msvc - Release build
2020.11.09:11:30:45.272: main Cmd line: -pool eu1-etc.ethermine.org:4444 -wal 0x652877ca34723077dc3c01853b70dda1df42dada.Miner10 -rmode 2 -tstop 85 -cdmport 2222
2020.11.09:11:30:45.272: main No CUDA driver found
2020.11.09:11:30:49.045: main OpenCL driver version: 20.4.x
2020.11.09:11:30:49.176: main Available GPUs for mining:
2020.11.09:11:30:49.177: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.09:11:30:49.178: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.09:11:30:49.178: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.09:11:30:49.178: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.09:11:30:49.178: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.09:11:30:49.178: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.09:11:30:49.178: main GPU7: Radeon RX 570 Series (pcie 9), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.09:11:30:49.178: main GPU8: Radeon RX 570 Series (pcie 11), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.09:11:30:49.178: main Increase the Windows page file size to at least 36 GB to avoid out of memory errors and unexpected crashes.
2020.11.09:11:30:49.181: main ADL library initialized
2020.11.09:11:30:50.531: main Eth: the pool list contains 1 pool (1 from command-line)
2020.11.09:11:30:50.531: main Eth: primary pool: eu1-etc.ethermine.org:4444
2020.11.09:11:30:50.531: main Starting GPU mining
2020.11.09:11:30:50.532: main Matched GPU1 to ADL adapter index 32 (method 1)
2020.11.09:11:30:50.631: main GPU1: AMD driver 20.4.2
2020.11.09:11:30:50.631: main GPU1: Created ADL monitor for adapter 32; overdrive version: 7 (7)
2020.11.09:11:30:50.631: main GPU1: using AMD driver ver 20.4.2
2020.11.09:11:30:50.632: main Matched GPU2 to ADL adapter index 0 (method 1)
2020.11.09:11:30:50.722: main GPU2: AMD driver 20.4.2
2020.11.09:11:30:50.722: main GPU2: Created ADL monitor for adapter 0; overdrive version: 7 (7)
2020.11.09:11:30:50.722: main GPU2: using AMD driver ver 20.4.2
2020.11.09:11:30:50.722: main Matched GPU3 to ADL adapter index 40 (method 1)
2020.11.09:11:30:50.813: main GPU3: AMD driver 20.4.2
2020.11.09:11:30:50.813: main GPU3: Created ADL monitor for adapter 40; overdrive version: 7 (7)
2020.11.09:11:30:50.813: main GPU3: using AMD driver ver 20.4.2
2020.11.09:11:30:50.813: main Matched GPU4 to ADL adapter index 8 (method 1)
2020.11.09:11:30:50.905: main GPU4: AMD driver 20.4.2
2020.11.09:11:30:50.905: main GPU4: Created ADL monitor for adapter 8; overdrive version: 7 (7)
2020.11.09:11:30:50.905: main GPU4: using AMD driver ver 20.4.2
2020.11.09:11:30:50.905: main Matched GPU5 to ADL adapter index 16 (method 1)
2020.11.09:11:30:50.997: main GPU5: AMD driver 20.4.2
2020.11.09:11:30:50.997: main GPU5: Created ADL monitor for adapter 16; overdrive version: 7 (7)
2020.11.09:11:30:50.997: main GPU5: using AMD driver ver 20.4.2
2020.11.09:11:30:50.997: main Matched GPU6 to ADL adapter index 24 (method 1)
2020.11.09:11:30:51.092: main GPU6: AMD driver 20.4.2
2020.11.09:11:30:51.092: main GPU6: Created ADL monitor for adapter 24; overdrive version: 7 (7)
2020.11.09:11:30:51.092: main GPU6: using AMD driver ver 20.4.2
2020.11.09:11:30:51.092: main Matched GPU7 to ADL adapter index 48 (method 1)
2020.11.09:11:30:51.184: main GPU7: AMD driver 20.4.2
2020.11.09:11:30:51.184: main GPU7: Created ADL monitor for adapter 48; overdrive version: 7 (7)
2020.11.09:11:30:51.184: main GPU7: using AMD driver ver 20.4.2
2020.11.09:11:30:51.184: main Matched GPU8 to ADL adapter index 56 (method 1)
2020.11.09:11:30:51.274: main GPU8: AMD driver 20.4.2
2020.11.09:11:30:51.274: main GPU8: Created ADL monitor for adapter 56; overdrive version: 7 (7)
2020.11.09:11:30:51.274: main GPU8: using AMD driver ver 20.4.2
2020.11.09:11:30:51.380: wdog Starting watchdog thread
2020.11.09:11:30:51.404: main Eth: Connecting to ethash pool eu1-etc.ethermine.org:4444 (proto: EthProxy)
2020.11.09:11:30:51.406: main GPU1: 35C 5% 32W, GPU2: 39C 9% 32W, GPU3: 38C 8% 33W, GPU4: 37C 7% 33W, GPU5: 37C 7% 31W, GPU6: 35C 5% 32W, GPU7: 36C 6% 32W, GPU8: 34C 4% 31W
GPUs power: 255.5 W
2020.11.09:11:30:51.460: eths Eth: Connected to ethash pool eu1-etc.ethermine.org:4444 (172.65.232.146)
2020.11.09:11:30:51.460: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["0x652877ca34723077dc3c01853b70dda1df42dada.Miner10"]}

2020.11.09:11:30:51.497: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2020.11.09:11:30:51.499: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2020.11.09:11:30:51.533: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x5a0df78931727172a973d756a5836e91b4aeb320e3daa9c22071b935226ec74f","0xfc3afa075197d819758f4d3aacefbbace58798e55360d999892440dfee5e1c13","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb092c4"]}
2020.11.09:11:30:51.533: eths Eth: New job #5a0df789 from eu1-etc.ethermine.org:4444; diff: 4000MH
2020.11.09:11:30:51.535: GPU1 GPU1: Starting up... (0)
2020.11.09:11:30:51.535: GPU1 GPU1: Generating ethash light cache for epoch #385
2020.11.09:11:30:51.537: GPU2 GPU2: Starting up... (0)
2020.11.09:11:30:51.538: GPU3 GPU3: Starting up... (0)
2020.11.09:11:30:51.540: GPU4 GPU4: Starting up... (0)
2020.11.09:11:30:51.543: GPU5 GPU5: Starting up... (0)
2020.11.09:11:30:51.544: GPU6 GPU6: Starting up... (0)
2020.11.09:11:30:51.546: GPU7 GPU7: Starting up... (0)
2020.11.09:11:30:51.548: GPU8 GPU8: Starting up... (0)
2020.11.09:11:30:51.612: main Listening for CDM remote manager at port 2222 in read-only mode
2020.11.09:11:30:55.013: GPU1 Light cache generated in 3.5 s (18.4 MB/s)
2020.11.09:11:30:56.222: GPU1 GPU1: Free VRAM: 7.948 GB; used: 0.052 GB
2020.11.09:11:30:56.223: GPU1 GPU1: Allocating DAG (4.01) GB; good for epoch up to #387
2020.11.09:11:30:56.223: GPU1 GPU1: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:11:30:56.224: wdog Fatal error detected. Restarting.
2020.11.09:11:30:56.261: GPU1 Increase the Windows page file size to at least 37 GB to avoid out of memory errors and unexpected crashes.
2020.11.09:11:30:56.437: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2020.11.09:11:30:56.438: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0) 7: 0.000 MH/s (0) 8: 0.000 MH/s (0)
2020.11.09:11:30:57.381: GPU2 GPU2: Free VRAM: 7.948 GB; used: 0.052 GB
2020.11.09:11:30:57.381: GPU2 GPU2: Allocating DAG (4.01) GB; good for epoch up to #387
2020.11.09:11:30:57.381: GPU2 GPU2: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:11:30:57.436: GPU2 Increase the Windows page file size to at least 37 GB to avoid out of memory errors and unexpected crashes.
2020.11.09:11:30:58.573: GPU3 GPU3: Free VRAM: 7.948 GB; used: 0.052 GB
2020.11.09:11:30:58.573: GPU3 GPU3: Allocating DAG (4.01) GB; good for epoch up to #387
2020.11.09:11:30:58.573: GPU3 GPU3: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:11:30:58.613: GPU3 Increase the Windows page file size to at least 37 GB to avoid out of memory errors and unexpected crashes.
2020.11.09:11:30:58.943: unkn Quitting...

[DrG]

I know this is the mining thread but let me just say this - with Christmas and other holidays coming around the corner it might be prudent to get rid of the 4GB cards now while you have an easier chance to offload them. You can probably mine another $10 of ETH with free electricity doing all this miner tricks of partially loading the DAG but it is a losing battle (unless you're switching to ETC @ 390). Ultimately the goal is to have the most income, and sometimes that means getting rid of older hardware and just buying the coin or using proceeds to buy newer cards.

[abg00]

Using WIN 10
5.2A, Ethermine, Etherium, driver  20.5.2
RX5500 4 Gb card, together with -daglim 1 gives out only 3MH!
Will there be support for 5500 4Gb cards?

work fine without daglim
error with strap and rxboost

[sys2007]

Using WIN 10
5.2A, Ethermine, Etherium, driver  20.5.2
RX5500 4 Gb card, together with -daglim 1 gives out only 3MH!
Will there be support for 5500 4Gb cards?

work fine without daglim
error with strap and rxboost

4 GB or 8Gb??
RX 5500XT ?
I have 3,36Mh without daglim.

[abg00]

Using WIN 10
5.2A, Ethermine, Etherium, driver  20.5.2
RX5500 4 Gb card, together with -daglim 1 gives out only 3MH!
Will there be support for 5500 4Gb cards?

work fine without daglim
error with strap and rxboost

4 GB ??

8 gb. sorry
manual -daglim 4000 same speed?

[ak313]

when will Linux version get ready?

this is my log for rx570 4GB in ubuntu
 Free VRAM: 3.938 GB; used: 0.051 GB
2020.11.07:14:42:35.859: GPU1 GPU1: Allocating DAG (3.93) GB; good for epoch up to #375

--
another rig
2020.11.09:05:56:47.697: GPU1 GPU1: Free VRAM: 3.938 GB; used: 0.051 GB
2020.11.09:05:56:47.703: GPU1 GPU1: Allocating DAG for epoch #374 (3.92) GB
--

how much will it work?
i am going to switch to another coin .. should I?

[sys2007]

Using WIN 10
5.2A, Ethermine, Etherium, driver  20.5.2
RX5500 4 Gb card, together with -daglim 1 gives out only 3MH!
Will there be support for 5500 4Gb cards?

work fine without daglim
error with strap and rxboost

4 GB ??

8 gb. sorry
manual -daglim 4000 same speed?

Yes, 3,3 Mh.. with -daglim 4000