fistsofgod
Newbie
 Offline
Activity: 164
Merit: 0
|
 |
October 10, 2018, 03:37:38 AM
Last edit: October 10, 2018, 07:53:40 AM by fistsofgod |
|
Second crash occurred with my 5 GPU rig, each 1070Ti with PL=120 W and OC=200/1000.
make sure your page file is big enough. i set mine to 7168 mb per card. then start lowering your OC until stability increases. I'd also decrease power for higher efficiency
Where do I have to set the page file settings? It is Ubuntu. My knowledge about page file how to set is in Windows, no clue about settings in Ubunto. Many thanks in advance for your help. Found this here: https://i.imgur.com/Lzf6r1l.jpgYeah i dont know about ubuntu, but decrease clock for stability and decrease power for efficiency. efficiency > hashrate |
|
|
|
|
|
hell_slayer
|
|
October 10, 2018, 04:44:06 PM |
|
Got a problem with new 0.6 version and1080ti. Win 10 system reboots in a specific scenario : 1) miner is running on 210.9 algo (I don't try on other algo's , so it maybe unimportant detail) on a full load 2)miner is closed and new miner with --intensity 2 option is executed 3) --intensity 2 miner is closed and full load miner is executed ===> system reboot  previous 0.5 version worked without errors , does it make sense to try other --intensity parameters? |
|
|
|
|
uralcryptocoin
Sr. Member
Offline
Activity: 1042
Merit: 328
SIGNATURE CREATION by uralcryptocoin
|
|
October 10, 2018, 05:05:30 PM |
|
Got a problem with new 0.6 version and1080ti. Win 10 system reboots in a specific scenario : 1) miner is running on 210.9 algo (I don't try on other algo's , so it maybe unimportant detail) on a full load 2)miner is closed and new miner with --intensity 2 option is executed 3) --intensity 2 miner is closed and full load miner is executed ===> system reboot previous 0.5 version worked without errors , does it make sense to try other --intensity parameters? There is a lack of info. What is your rig configuration? What hardware espessially PSU and number of GPUs? Would you check power consumption of the GPU? NVSMI tool will help .... 2)miner is closed and new miner with --intensity 2 option is executed ....
Which error appears miner closing with? Use logging to get error message |
|
|
|
|
|
BTC Bitcoin: A Peer-to-Peer Electronic Cash System BTC
A purely peer-to-peer version of electronic cash would allow online payments to be sent directly from one party to another without going through a financial institution. Digital signatures provide part of the solution, but the main benefits are lost if a trusted third party is still required to prevent double-spending. We propose a solution to the double-spending problem using a peer-to-peer network. The network timestamps transactions by hashing them into an ongoing chain of hash-based proof-of-work, forming a record that cannot be changed without redoing the proof-of-work. The longest chain not only serves as proof of the sequence of events witnessed, but proof that it came from the largest pool of CPU power. As long as a majority of CPU power is controlled by nodes that are not cooperating to attack the network, they'll generate the longest chain and outpace attackers. The network itself requires minimal structure. Messages are broadcast on a best effort basis, and nodes can leave and rejoin the network at will, accepting the longest proof-of-work chain as proof of what happened while they were gone. |
|
|
|
hell_slayer
|
|
October 10, 2018, 05:27:30 PM |
|
Which error appears miner closing with? Use logging to get error message
No error messages . Step 1 , 2 are working fine without any errors , but step 3 causes system to reboot . As I said before 0.5 version is working fine , so I guess it's not a hardware issue There is a lack of info. What is your rig configuration? What hardware espessially PSU and number of GPUs? Would you check power consumption of the GPU? NVSMI tool will help
Only a single gpu is running on my gaming PC powered by 600w platinum psu . GPU power consumption is locked at 200W . Total energy consumption of the system is 410w , so it's not a problem |
|
|
|
|
uralcryptocoin
Sr. Member
Offline
Activity: 1042
Merit: 328
SIGNATURE CREATION by uralcryptocoin
|
|
October 12, 2018, 05:52:57 PM |
|
....
Only a single gpu is running on my gaming PC powered by 600w platinum psu . GPU power consumption is locked at 200W . Total energy consumption of the system is 410w , so it's not a problem
Looks really strange... I try to suppose the following: 200W is enough low power limit for GTX1080ti with typical PL at 250W. So what is your OC settings and working core\memory clocks? Maybe try to reduce OC or increase PL to 220W or more |
|
|
|
|
|
BTC Bitcoin: A Peer-to-Peer Electronic Cash System BTC
A purely peer-to-peer version of electronic cash would allow online payments to be sent directly from one party to another without going through a financial institution. Digital signatures provide part of the solution, but the main benefits are lost if a trusted third party is still required to prevent double-spending. We propose a solution to the double-spending problem using a peer-to-peer network. The network timestamps transactions by hashing them into an ongoing chain of hash-based proof-of-work, forming a record that cannot be changed without redoing the proof-of-work. The longest chain not only serves as proof of the sequence of events witnessed, but proof that it came from the largest pool of CPU power. As long as a majority of CPU power is controlled by nodes that are not cooperating to attack the network, they'll generate the longest chain and outpace attackers. The network itself requires minimal structure. Messages are broadcast on a best effort basis, and nodes can leave and rejoin the network at will, accepting the longest proof-of-work chain as proof of what happened while they were gone. |
|
|
|
hell_slayer
|
|
October 13, 2018, 10:47:31 AM |
|
Looks really strange...
I try to suppose the following: 200W is enough low power limit for GTX1080ti with typical PL at 250W. So what is your OC settings and working core\memory clocks?
Maybe try to reduce OC or increase PL to 220W or more
Nothing special : +150 core clock , +500 mem , 80% power limit . Now I use version 0.5 again and everything works well, I just wonder what has changed in the new version and could cause such strange system behavior. |
|
|
|
|
BitSquare
Newbie
Offline
Activity: 28
Merit: 0
|
|
October 13, 2018, 11:45:50 AM |
|
memory +1000 ? Am I right?
This is a very large overclocking for this graphics card. Try + 700 and add gradually if it is stable.
Perhaps it is better to keep the video card and not to put above 800.
My nVidia 1080Ti can only +700. |
|
|
|
|
fistsofgod
Newbie
Offline
Activity: 164
Merit: 0
|
|
October 13, 2018, 07:46:31 PM |
|
EWBF_, can you add ability for miner to exit as soon as there is an error with the cuda cores? currently when there is a memory error or something like that it tries to restart the GPUs and stuff. I'd prefer the miner just quit so computer restarts faster. everytime the miner tries to restart GPUs one of them doesnt mine or the computer restarts anyways. It would be more efficient if the program exited right away
|
|
|
|
|
Overdrive5
Member
Offline
Activity: 113
Merit: 10
|
|
October 14, 2018, 02:10:37 AM |
|
EWBF_, can you add ability for miner to exit as soon as there is an error with the cuda cores? currently when there is a memory error or something like that it tries to restart the GPUs and stuff. I'd prefer the miner just quit so computer restarts faster. everytime the miner tries to restart GPUs one of them doesnt mine or the computer restarts anyways. It would be more efficient if the program exited right away
fistsofgod, Have you tried the --eexit 3 setting? Otherwise you will need a separate software watchdog that monitors GPU utilization. Hope this helps Overdrive5 |
|
|
|
|
fistsofgod
Newbie
Offline
Activity: 164
Merit: 0
|
|
October 14, 2018, 03:14:10 AM
Last edit: October 14, 2018, 03:35:56 AM by fistsofgod |
|
yes, i have it on exit 3. i'll look into 3rd party software. maybe that'll help the gpu's restart without having to restart machine. probably would be faster. currently the time from error to restarting machine to mining again is about 4-5 minutes. instant-restart would save 1 min most of the time, but sometimes it goes longer. got 14 cards on win10
|
|
|
|
|
Overdrive5
Member
Offline
Activity: 113
Merit: 10
|
|
October 14, 2018, 03:50:02 AM |
|
yes, i have it on exit 3. i'll look into 3rd party software. maybe that'll help the gpu's restart without having to restart machine. probably would be faster. currently the time from error to restarting machine to mining again is about 4-5 minutes. instant-restart would save 1 min most of the time, but sometimes it goes longer. got 14 cards on win10
If you were on Linux, I could point you to something. I haven't done windows in over 12 years, so unfortunately, I would be of no help. Here is a thought. Run each card in separate miner instance. Make a log entry when a specific instance resets for you to review when you return to the machine. That should at least point you to the problem GPU. Then lower overclock on that one or change out the riser and see if that fixes it. Hope you find your solution. |
|
|
|
|
fistsofgod
Newbie
Offline
Activity: 164
Merit: 0
|
|
October 14, 2018, 05:35:00 PM
Last edit: October 14, 2018, 11:10:32 PM by fistsofgod |
|
yes, i have it on exit 3. i'll look into 3rd party software. maybe that'll help the gpu's restart without having to restart machine. probably would be faster. currently the time from error to restarting machine to mining again is about 4-5 minutes. instant-restart would save 1 min most of the time, but sometimes it goes longer. got 14 cards on win10
If you were on Linux, I could point you to something. I haven't done windows in over 12 years, so unfortunately, I would be of no help. Here is a thought. Run each card in separate miner instance. Make a log entry when a specific instance resets for you to review when you return to the machine. That should at least point you to the problem GPU. Then lower overclock on that one or change out the riser and see if that fixes it. Hope you find your solution. I've done all that, I got the settings closing in on the max. errors once every 24-48 hrs the more pressing issue im having recently is if it errors and restarts sometimes only 13 gpus are recognized by windows and the I have to manually go into device manager and scan for 14th which is then installed by windows |
|
|
|
|
fistsofgod
Newbie
Offline
Activity: 164
Merit: 0
|
|
October 14, 2018, 11:32:02 PM
Last edit: October 15, 2018, 03:53:01 AM by fistsofgod |
|
Just had this happen:
14.10.2018 18:22:29 CUDA: Device: 3 Thread exited with message: "the launch timed out and was terminated"
14.10.2018 18:22:29 CUDA: Device: 13 Thread exited with message: "the launch timed out and was terminated"
14.10.2018 18:22:29 CUDA: Device: 12 Thread exited with message: "the launch timed out and was terminated"
14.10.2018 18:22:29 CUDA: Device: 8 Thread exited with message: "the launch timed out and was terminated"
14.10.2018 18:22:29 CUDA: Device: 4 Thread exited with message: "the launch timed out and was terminated"
14.10.2018 18:22:29 CUDA: Device: 0 Thread exited with message: "the launch timed out and was terminated"
14.10.2018 18:22:29 CUDA: Device: 6 Thread exited with message: "the launch timed out and was terminated"
14.10.2018 18:22:29 CUDA: Device: 11 Thread exited with message: "the launch timed out and was terminated"
14.10.2018 18:22:29 CUDA: Device: 1 Thread exited with message: "the launch timed out and was terminated"
14.10.2018 18:22:29 CUDA: Device: 9 Thread exited with message: "the launch timed out and was terminated"
14.10.2018 18:22:29 CUDA: Device: 2 Thread exited with message: "the launch timed out and was terminated"
14.10.2018 18:22:29 CUDA: Device: 7 Thread exited with message: "the launch timed out and was terminated"
14.10.2018 18:22:29 CUDA: Device: 10 Thread exited with message: "the launch timed out and was terminated"
14.10.2018 18:22:29 CUDA: Device: 5 Thread exited with message: "the launch timed out and was terminated"
14.10.2018 18:22:30 WARNING: Looks like GPU0 are stopped. Restarting...
14.10.2018 18:22:30 INFO: GPU0 are restarted.
14.10.2018 18:22:30 WARNING: Looks like GPU1 are stopped. Restarting...
14.10.2018 18:22:30 INFO: GPU1 are restarted.
14.10.2018 18:22:30 WARNING: Looks like GPU2 are stopped. Restarting...
14.10.2018 18:22:30 INFO: GPU2 are restarted.
14.10.2018 18:22:30 WARNING: Looks like GPU3 are stopped. Restarting...
14.10.2018 18:22:30 INFO: GPU3 are restarted.
14.10.2018 18:22:30 WARNING: Looks like GPU4 are stopped. Restarting...
14.10.2018 18:22:30 INFO: GPU4 are restarted.
14.10.2018 18:22:31 WARNING: Looks like GPU5 are stopped. Restarting...
14.10.2018 18:22:31 INFO: GPU5 are restarted.
14.10.2018 18:22:31 WARNING: Looks like GPU6 are stopped. Restarting...
14.10.2018 18:22:31 INFO: GPU6 are restarted.
14.10.2018 18:22:31 WARNING: Looks like GPU7 are stopped. Restarting...
14.10.2018 18:22:31 INFO: GPU7 are restarted.
14.10.2018 18:22:31 WARNING: Looks like GPU8 are stopped. Restarting...
14.10.2018 18:22:31 INFO: GPU8 are restarted.
14.10.2018 18:22:31 WARNING: Looks like GPU9 are stopped. Restarting...
14.10.2018 18:22:31 INFO: GPU9 are restarted.
14.10.2018 18:22:32 WARNING: Looks like GPU10 are stopped. Restarting...
14.10.2018 18:22:32 INFO: GPU10 are restarted.
14.10.2018 18:22:32 WARNING: Looks like GPU11 are stopped. Restarting...
14.10.2018 18:22:32 INFO: GPU11 are restarted.
14.10.2018 18:22:32 WARNING: Looks like GPU12 are stopped. Restarting...
14.10.2018 18:22:32 INFO: GPU12 are restarted.
14.10.2018 18:22:32 WARNING: Looks like GPU13 are stopped. Restarting...
14.10.2018 18:22:32 INFO: GPU13 are restarted.
14.10.2018 18:22:42 INFO: Detected new work: a70f
14.10.2018 18:22:50 Temp: GPU0 0C GPU1 0C GPU2 0C GPU3 0C GPU4 0C GPU5 0C GPU6 0C GPU7 0C GPU8 0C GPU9 0C GPU10 0C GPU11 0C GPU12 0C GPU13 0C
14.10.2018 18:22:50 GPU0: 41 Sol/s GPU1: 45 Sol/s GPU2: 41 Sol/s GPU3: 33 Sol/s GPU4: 42 Sol/s GPU5: 46 Sol/s GPU6: 44 Sol/s GPU7: 48 Sol/s GPU8: 44 Sol/s GPU9: 42 Sol/s GPU10: 41 Sol/s GPU11: 41 Sol/s GPU12: 44 Sol/s GPU13: 46 Sol/s
14.10.2018 18:22:50 Total speed: 598 Sol/s
14.10.2018 18:23:21 INFO: Target: 0013813813813814...
14.10.2018 18:23:21 Temp: GPU0 0C GPU1 0C GPU2 0C GPU3 0C GPU4 0C GPU5 0C GPU6 0C GPU7 0C GPU8 0C GPU9 0C GPU10 0C GPU11 0C GPU12 0C GPU13 0C
14.10.2018 18:23:21 GPU0: 0 Sol/s GPU1: 0 Sol/s GPU2: 0 Sol/s GPU3: 0 Sol/s GPU4: 0 Sol/s GPU5: 0 Sol/s GPU6: 0 Sol/s GPU7: 0 Sol/s GPU8: 0 Sol/s GPU9: 0 Sol/s GPU10: 0 Sol/s GPU11: 0 Sol/s GPU12: 0 Sol/s GPU13: 0 Sol/s
14.10.2018 18:23:21 Total speed: 0 Sol/s
14.10.2018 18:23:21 INFO: Detected new work: a710
14.10.2018 18:23:52 Temp: GPU0 0C GPU1 0C GPU2 0C GPU3 0C GPU4 0C GPU5 0C GPU6 0C GPU7 0C GPU8 0C GPU9 0C GPU10 0C GPU11 0C GPU12 0C GPU13 0C
14.10.2018 18:23:52 GPU0: 0 Sol/s GPU1: 0 Sol/s GPU2: 0 Sol/s GPU3: 0 Sol/s GPU4: 0 Sol/s GPU5: 0 Sol/s GPU6: 0 Sol/s GPU7: 0 Sol/s GPU8: 0 Sol/s GPU9: 0 Sol/s GPU10: 0 Sol/s GPU11: 0 Sol/s GPU12: 0 Sol/s GPU13: 0 Sol/s
14.10.2018 18:23:52 Total speed: 0 Sol/s
14.10.2018 18:24:16 INFO: Target: 001999999999999a...
14.10.2018 18:24:16 INFO: Detected new work: a711
14.10.2018 18:24:23 Temp: GPU0 0C GPU1 0C GPU2 0C GPU3 0C GPU4 0C GPU5 0C GPU6 0C GPU7 0C GPU8 0C GPU9 0C GPU10 0C GPU11 0C GPU12 0C GPU13 0C
14.10.2018 18:24:23 GPU0: 0 Sol/s GPU1: 0 Sol/s GPU2: 0 Sol/s GPU3: 0 Sol/s GPU4: 0 Sol/s GPU5: 0 Sol/s GPU6: 0 Sol/s GPU7: 0 Sol/s GPU8: 0 Sol/s GPU9: 0 Sol/s GPU10: 0 Sol/s GPU11: 0 Sol/s GPU12: 0 Sol/s GPU13: 0 Sol/s
14.10.2018 18:24:23 Total speed: 0 Sol/s
14.10.2018 18:24:31 WARNING: Looks like GPU0 are stopped. Restarting...
14.10.2018 18:24:36 ERROR: Looks like GPU0 are stuck.
14.10.2018 18:24:36 WARNING: Looks like GPU1 are stopped. Restarting...
14.10.2018 18:24:41 ERROR: Looks like GPU1 are stuck.
14.10.2018 18:24:41 WARNING: Looks like GPU2 are stopped. Restarting...
14.10.2018 18:24:46 ERROR: Looks like GPU2 are stuck.
14.10.2018 18:24:46 WARNING: Looks like GPU3 are stopped. Restarting...
14.10.2018 18:24:51 ERROR: Looks like GPU3 are stuck.
14.10.2018 18:24:52 WARNING: Looks like GPU4 are stopped. Restarting...
14.10.2018 18:24:53 Temp: GPU0 0C GPU1 0C GPU2 0C GPU3 0C GPU4 0C GPU5 0C GPU6 0C GPU7 0C GPU8 0C GPU9 0C GPU10 0C GPU11 0C GPU12 0C GPU13 0C
14.10.2018 18:24:53 GPU0: 0 Sol/s GPU1: 0 Sol/s GPU2: 0 Sol/s GPU3: 0 Sol/s GPU4: 0 Sol/s GPU5: 0 Sol/s GPU6: 0 Sol/s GPU7: 0 Sol/s GPU8: 0 Sol/s GPU9: 0 Sol/s GPU10: 0 Sol/s GPU11: 0 Sol/s GPU12: 0 Sol/s GPU13: 0 Sol/s
14.10.2018 18:24:53 Total speed: 0 Sol/s
14.10.2018 18:24:57 ERROR: Looks like GPU4 are stuck.
14.10.2018 18:24:57 WARNING: Looks like GPU5 are stopped. Restarting...
14.10.2018 18:24:58 INFO: Detected new work: a712
14.10.2018 18:25:02 ERROR: Looks like GPU5 are stuck.
14.10.2018 18:25:02 WARNING: Looks like GPU6 are stopped. Restarting...
14.10.2018 18:25:07 ERROR: Looks like GPU6 are stuck.
14.10.2018 18:25:07 WARNING: Looks like GPU7 are stopped. Restarting...
14.10.2018 18:25:12 ERROR: Looks like GPU7 are stuck.
14.10.2018 18:25:12 WARNING: Looks like GPU8 are stopped. Restarting...
14.10.2018 18:25:17 ERROR: Looks like GPU8 are stuck.
14.10.2018 18:25:18 WARNING: Looks like GPU9 are stopped. Restarting...
14.10.2018 18:25:23 ERROR: Looks like GPU9 are stuck.
14.10.2018 18:25:23 WARNING: Looks like GPU10 are stopped. Restarting...
14.10.2018 18:25:24 Temp: GPU0 0C GPU1 0C GPU2 0C GPU3 0C GPU4 0C GPU5 0C GPU6 0C GPU7 0C GPU8 0C GPU9 0C GPU10 0C GPU11 0C GPU12 0C GPU13 0C
14.10.2018 18:25:24 GPU0: 0 Sol/s GPU1: 0 Sol/s GPU2: 0 Sol/s GPU3: 0 Sol/s GPU4: 0 Sol/s GPU5: 0 Sol/s GPU6: 0 Sol/s GPU7: 0 Sol/s GPU8: 0 Sol/s GPU9: 0 Sol/s GPU10: 0 Sol/s GPU11: 0 Sol/s GPU12: 0 Sol/s GPU13: 0 Sol/s
14.10.2018 18:25:24 Total speed: 0 Sol/s
14.10.2018 18:25:28 ERROR: Looks like GPU10 are stuck.
14.10.2018 18:25:28 WARNING: Looks like GPU11 are stopped. Restarting...
14.10.2018 18:25:33 ERROR: Looks like GPU11 are stuck.
14.10.2018 18:25:33 WARNING: Looks like GPU12 are stopped. Restarting...
14.10.2018 18:25:38 ERROR: Looks like GPU12 are stuck.
14.10.2018 18:25:39 WARNING: Looks like GPU13 are stopped. Restarting...
14.10.2018 18:25:44 ERROR: Looks like GPU13 are stuck.
14.10.2018 18:25:45 WARNING: Looks like GPU0 are stopped. Restarting...
14.10.2018 18:25:50 ERROR: Looks like GPU0 are stuck.
14.10.2018 18:25:50 INFO: Exit...
took almost 3 minutes to exit after error. I think i found the gpu causing the problem |
|
|
|
|
crypper
Member
Offline
Activity: 239
Merit: 12
|
|
October 15, 2018, 07:50:15 AM |
|
Just had this happen:
took almost 3 minutes to exit after error. I think i found the gpu causing the problem good..next time don't limit yourself with posting log for 2 h only...post your logs for the last month or two...so that it takes several pages of the thread |
|
|
|
|
fistsofgod
Newbie
Offline
Activity: 164
Merit: 0
|
|
October 15, 2018, 02:51:14 PM |
|
Just had this happen:
took almost 3 minutes to exit after error. I think i found the gpu causing the problem good..next time don't limit yourself with posting log for 2 h only...post your logs for the last month or two...so that it takes several pages of the thread go back to your bridge, get out of your mothers basement, or lose your virginity. Probably need to do all 3 |
|
|
|
|
slim33
Newbie
Offline
Activity: 20
Merit: 0
|
|
October 15, 2018, 03:56:55 PM |
|
EWBF_, can you add ability for miner to exit as soon as there is an error with the cuda cores? currently when there is a memory error or something like that it tries to restart the GPUs and stuff. I'd prefer the miner just quit so computer restarts faster. everytime the miner tries to restart GPUs one of them doesnt mine or the computer restarts anyways. It would be more efficient if the program exited right away
I use HWiNFO to monitor GPUs and trigger actions if they go down. I also use SwithMail to alert me via email if anything happens. |
|
|
|
|
fistsofgod
Newbie
Offline
Activity: 164
Merit: 0
|
|
October 15, 2018, 04:48:15 PM |
|
EWBF_, can you add ability for miner to exit as soon as there is an error with the cuda cores? currently when there is a memory error or something like that it tries to restart the GPUs and stuff. I'd prefer the miner just quit so computer restarts faster. everytime the miner tries to restart GPUs one of them doesnt mine or the computer restarts anyways. It would be more efficient if the program exited right away
I use HWiNFO to monitor GPUs and trigger actions if they go down. I also use SwithMail to alert me via email if anything happens. cool , didnt know hwinfo had that ability |
|
|
|
|
slim33
Newbie
Offline
Activity: 20
Merit: 0
|
|
October 15, 2018, 05:28:20 PM |
|
EWBF_, can you add ability for miner to exit as soon as there is an error with the cuda cores? currently when there is a memory error or something like that it tries to restart the GPUs and stuff. I'd prefer the miner just quit so computer restarts faster. everytime the miner tries to restart GPUs one of them doesnt mine or the computer restarts anyways. It would be more efficient if the program exited right away
I use HWiNFO to monitor GPUs and trigger actions if they go down. I also use SwithMail to alert me via email if anything happens. cool , didnt know hwinfo had that ability I set it so if my GPU goes under a certain temp. it runs a batch file that does whatever I want it to do. |
|
|
|
|
Juniormkl
Newbie
Offline
Activity: 155
Merit: 0
|
|
October 15, 2018, 10:12:12 PM |
|
EWBF_, can you add ability for miner to exit as soon as there is an error with the cuda cores? currently when there is a memory error or something like that it tries to restart the GPUs and stuff. I'd prefer the miner just quit so computer restarts faster. everytime the miner tries to restart GPUs one of them doesnt mine or the computer restarts anyways. It would be more efficient if the program exited right away
I use HWiNFO to monitor GPUs and trigger actions if they go down. I also use SwithMail to alert me via email if anything happens. cool , didnt know hwinfo had that ability Just download ETHcontrol from minermonitoring and everything is solved on your side, it restart the miner when an error occur. https://minermonitoring.com/ |
|
|
|
|
Andrey09
Newbie
Offline
Activity: 176
Merit: 0
|
|
October 16, 2018, 11:23:55 AM |
|
Need improve auto restart function if error occurs.
|
|
|
|
|
|
