Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[rawbot]

I have my claymore configured to dual mine both decred (on suprnova pool) and Ethereum.   For a couple of months it has been fine but now decred shares are all being rejected but all ethereum shares are OK.  Is it a problem with the pool or my rig?

My batch file hasn't changed in any way.

[Trimegistus]

Ok, I'll implement it in next update.

Thank you! 

[Elder III]

Any owner of the XFX 470 1236 MHz, how good is the performance on Eth only?

You would want to drop the Core to ~1150 and raise the Memory to a minimum of 1750 (even 1950-200 if it's stable) and then you should get at least 22 Mh/s, perhaps even 24 depending on the card. All GPUs may be a little different, so those are just approximate figures. --- If you modify the bios you can potentially hit up to 30 Mh/s, but start out with the simpler settings at first.

[Bwtmn7]

Any owner of the XFX 470 1236 MHz, how good is the performance on Eth only?

You would want to drop the Core to ~1150 and raise the Memory to a minimum of 1750 (even 1950-200 if it's stable) and then you should get at least 22 Mh/s, perhaps even 24 depending on the card. All GPUs may be a little different, so those are just approximate figures. --- If you modify the bios you can potentially hit up to 30 Mh/s, but start out with the simpler settings at first.

well I am looking to buy one but I am not sure if all can do 30Mh/s, cna do even do 30 with dual mining?

[rawbot]

Any owner of the XFX 470 1236 MHz, how good is the performance on Eth only?

You would want to drop the Core to ~1150 and raise the Memory to a minimum of 1750 (even 1950-200 if it's stable) and then you should get at least 22 Mh/s, perhaps even 24 depending on the card. All GPUs may be a little different, so those are just approximate figures. --- If you modify the bios you can potentially hit up to 30 Mh/s, but start out with the simpler settings at first.

I jumped right in at the deep end. Had all my bioses flashed by the fourth day.  It was very stressful though because of the potential damage to the cards.

[pornluver]

Someone please help! When I try to mine with RX480, the miner crashes. A have 3 card - 2x270X and 1xRX480. If i try to mine with only 270X, there is no problem, but if I try to mine with all 3 or just with the polaris - the miner crashes. I post last rows from log file:

01:40:59:271   d20   Total cards: 3
01:40:59:287   d20   Initializing...

01:40:59:303   d20   GPU #0 recognized as Radeon RX 480
01:40:59:303   d20   GPU #1 recognized as Radeon 270/270X
01:40:59:318   d20   GPU #2 recognized as Radeon 270/270X
01:40:59:318   d20   POOL/SOLO version
01:40:59:318   d20   b167
01:40:59:350   d20   start building OpenCL program...

I don't know what happened, I was mining with RX480 for 1 day, but then I try some intensity changes and after all I cannot mine with RX480 anymore...

Claymore, please help. I reinstall Windows and no change, still can't mine. ;(

If it fails on "start building OpenCL program" - something is wrong with OpenCL, i.e. with drivers.

Also I have the exact same problem with this guy. However, my rig would sometimes work and sometimes don't. Can't be the driver. Unless I change the driver in between without realizing it.

Just in case it's really the driver. Which driver you recommend?

Many recommend 16.9.2

You yourself said that we should use 15.2

Which one you think is best now?

[adaseb]

Anyone getting this miner detected as a virus Rundas.B ?

Really wish Claymore would post some type of SHA256 of the file just in case some of the MEGA/Google places get compromised.

[pornluver]

I used claymore 8 works fine. Then I used 9.1 and hashrate drop from 30 mh/s to 19 mh/s

Also my rig won't run if I undervolt too much

The log says

04:16:26:448   180   args: -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal teguh123.rig1 -epsw x -esm 3 -allpools 1 -dpool hub.miningpoolhub.com:17022 -dwal pornluver.rig1 -dpsw x -dcoin sc -dcri 30
04:16:26:448   180   
04:16:26:448   180   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
04:16:26:448   180   º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v8.1      º
04:16:26:448   180   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
04:16:26:448   180   
04:16:26:666   180   ETH: 1 pool is specified
04:16:26:666   180   Main Ethereum pool is europe.ethash-hub.miningpoolhub.com:17020
04:16:26:666   180   SC: 1 pool is specified
04:16:26:666   180   Main Siacoin pool is hub.miningpoolhub.com:17022
04:16:33:214   180   OpenCL platform: Intel(R) OpenCL
04:16:33:214   180   OpenCL platform: AMD Accelerated Parallel Processing
04:16:33:214   180   OpenCL initializing...

04:16:33:214   180   AMD Cards available: 6
04:16:33:214   180   GPU #0: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #0 recognized as Radeon RX 480
04:16:33:214   180   GPU #1: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #1 recognized as Radeon RX 480
04:16:33:214   180   GPU #2: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #2 recognized as Radeon RX 480
04:16:33:214   180   GPU #3: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #3 recognized as Radeon RX 480
04:16:33:214   180   GPU #4: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #4 recognized as Radeon RX 480
04:16:33:214   180   GPU #5: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #5 recognized as Radeon RX 480
04:16:33:214   180   POOL/SOLO version
04:16:33:214   180   b255
04:16:33:214   180   Platform: Windows
04:16:33:292   180   start building OpenCL program...


It simply stuck there.

[Drawde]

I used claymore 8 works fine. Then I used 9.1 and hashrate drop from 30 mh/s to 19 mh/s

Also my rig won't run if I undervolt too much

The log says

04:16:26:448   180   args: -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal teguh123.rig1 -epsw x -esm 3 -allpools 1 -dpool hub.miningpoolhub.com:17022 -dwal pornluver.rig1 -dpsw x -dcoin sc -dcri 30
04:16:26:448   180   
04:16:26:448   180   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
04:16:26:448   180   º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v8.1      º
04:16:26:448   180   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
04:16:26:448   180   
04:16:26:666   180   ETH: 1 pool is specified
04:16:26:666   180   Main Ethereum pool is europe.ethash-hub.miningpoolhub.com:17020
04:16:26:666   180   SC: 1 pool is specified
04:16:26:666   180   Main Siacoin pool is hub.miningpoolhub.com:17022
04:16:33:214   180   OpenCL platform: Intel(R) OpenCL
04:16:33:214   180   OpenCL platform: AMD Accelerated Parallel Processing
04:16:33:214   180   OpenCL initializing...

04:16:33:214   180   AMD Cards available: 6
04:16:33:214   180   GPU #0: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #0 recognized as Radeon RX 480
04:16:33:214   180   GPU #1: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #1 recognized as Radeon RX 480
04:16:33:214   180   GPU #2: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #2 recognized as Radeon RX 480
04:16:33:214   180   GPU #3: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #3 recognized as Radeon RX 480
04:16:33:214   180   GPU #4: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #4 recognized as Radeon RX 480
04:16:33:214   180   GPU #5: Ellesmere, 4096 MB available, 36 compute units
04:16:33:214   180   GPU #5 recognized as Radeon RX 480
04:16:33:214   180   POOL/SOLO version
04:16:33:214   180   b255
04:16:33:214   180   Platform: Windows
04:16:33:292   180   start building OpenCL program...


It simply stuck there.

I had to change the default -dcri 30 to -dcri 25 for dcr and 20 for sia and ETH still never gets up to it's original speed before the upgrades but dcr and sia run much faster.

[Chugumoto]

I used claymore 8 works fine. Then I used 9.1 and hashrate drop from 30 mh/s to 19 mh/s

Most likely you need to find another value for dcri

[Ursul0]

I have my claymore configured to dual mine both decred (on suprnova pool) and Ethereum.   For a couple of months it has been fine but now decred shares are all being rejected but all ethereum shares are OK.  Is it a problem with the pool or my rig?

My batch file hasn't changed in any way.

suprnova was under ddos

[FFI2013]

Could someone tell me what the speed up is of r9 390 dual with dcr thanks

[adaseb]

Claymore, with the recent virus warnings can you please start including some type of checksum for your binaries?

You can use a website such as: https://defuse.ca/checksums.htm

[d57heinz]

Claymore, with the recent virus warnings can you please start including some type of checksum for your binaries?

You can use a website such as: https://defuse.ca/checksums.htm

I agree that would elleviate some concerns.  My norton flagged it as well.  It's odd it's a diff virus signature than usual

BR

[adaseb]

I am sure if we download from the main links in the topic it will be fine.

However I don't really trust MEGA that much and Google drive always has the download limit hit. Someone can hack his MEGA account and infect every binary there.

[xanx]

Has anyone else been getting this error: "Miner thread hangs, need to restart miner". I have been getting this a lot very recently, any ideas on how to fix or what to add for a script so it auto restart without me doing it manually?

[adaseb]

No idea if this was posted before but with ETH+PASC/PASL gets

with DCR 10. Setting any lower or higher slows down the speeds.

[Changeyourcoin]

I have 6 Sapphire rx480, and a XFX rx480 also. This is the setup in my .bat file:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0xc4b662640404c3e32463ae44eb28f178b129f74e/CYC -epsw x -dpool pasc-us-east1.nanopool.org:15555 -dwal 86646-64.4e219f21e2515fc4/CYC -epsw x -dcoin pasc -dcri 15 -mode 0 -esm 0 -etha 0 -ethi 8 -eres 2 -erate 1 -estale 1 -dbg 1 -tstop 80 -gser 2 -mport 0 -fanmin 70 -fanmax 85

My screen goes all black randomly, and last time I checked, I got a blue screen error. What it could be?

[Mr. N]

I've been mining Eth solo no problem on dwarfpool with this miner for a couple weeks now. After many attempts I've been unsuccessful in mining Decred also. The Ethereum pool works fine, but the Decred pool is unresponsive. I have tried multiple pools, with many different configurations in the Start.batch file, even with many different crimson editions, and even with multiple different versions of Claymore's Dual Eth. Miner. I'm still getting the same error with both of my rigs that run different cards. (Sapphire RX 470's, or XFX R9 280x's) It will say it connects with "DCR: Stratum - Connected dcr.suprnova.cc:2252" at start up, but then it gives me an error message of "DCR: Job timeout, disconnect, retry in 20 sec..." and hashes for 0.000 DCR on all gpus. Any tips to help me resolve this issue would be appreciated. 
thanks.

setx GPU_force_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us.dwarfpool.com:8008 -ewal xxx -epsw x -dpool dcr.suprnova.cc:2252 -dwal xxx  -dpsw x -allpools 1 -tt 68

[AltScope]

No idea if this was posted before but with ETH+PASC/PASL gets

with DCR 10. Setting any lower or higher slows down the speeds.

been running at -dcr 22 getting 24 eth 500 pascal on rx480 8gb