Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[noviceminer]

No idea if this was posted before but with ETH+PASC/PASL gets

with DCR 10. Setting any lower or higher slows down the speeds.

https://i.imgsafe.org/432ac4d2a6.png

Are you bios modded ? Which memory are your card and how many gbs ?

[Ursul0]

I had my doubts about v9.1 performance few pages back.
In the end it were stats of ethermine that got me confused.
Something like this: If your 24hour average goes down(worker removed & others renamed?) the workers show wrong stats.

[Claymore]

I had my doubts about v9.1 performance few pages back. In the end it were stats of ethermine that got me confused

ethermine pool had some problems yesterday, a lot of people noticed it.

[marvykkio]

I think that all pools have problems at this time, but you never know why

[marvykkio]

I had my doubts about v9.1 performance few pages back. In the end it were stats of ethermine that got me confused

ethermine pool had some problems yesterday, a lot of people noticed it.

claymore've noticed that the hash output varies version 9.1? 28 mhs,
collapses to 21, 18, 11 also wound mh / s

[Claymore]

I had my doubts about v9.1 performance few pages back. In the end it were stats of ethermine that got me confused

ethermine pool had some problems yesterday, a lot of people noticed it.

claymore've noticed that the hash output varies version 9.1? 28 mhs,
collapses to 21, 18, 11 also wound mh / s

Check "KNOWN ISSUES" section of Readme or OP. I try to find some workaround.

[Ursul0]

I had my doubts about v9.1 performance few pages back. In the end it were stats of ethermine that got me confused

ethermine pool had some problems yesterday, a lot of people noticed it.

claymore've noticed that the hash output varies version 9.1? 28 mhs,
collapses to 21, 18, 11 also wound mh / s

Check "KNOWN ISSUES" section of Readme or OP. I try to find some workaround.

Reduce the voltage + play with dcri. Its a non issue for me on 470 with 1080:1920-2000@850-867mv at 23-24 dcri

[Ursul0]

I had my doubts about v9.1 performance few pages back. In the end it were stats of ethermine that got me confused

ethermine pool had some problems yesterday, a lot of people noticed it.

that complicates things even further...
however I still have some workers on ethermine that display very bad numbers.
will now switch to a 'clean' address and we'll see.

[adaseb]

I had my doubts about v9.1 performance few pages back. In the end it were stats of ethermine that got me confused

ethermine pool had some problems yesterday, a lot of people noticed it.

Is this the sha256 checksums for your Window ETH miners?

EthDcrMiner64.exe (ETH 9.1)
1e3dce0e3dd3b7ca7e96d731ccc2cfc778dcaa5d9e550676820ff710ebe9fdd8

EthDcrMiner64.exe (ETH 9.0)
ce3734f66a90eeebb3d4a37f267cb6fa879c769cdc00768f1979e3da9535f239

[stef_stef]

I've been running my 480 solo ETH for a while, but now I think I wanna switch to dual mining. As I can see, the hash rate for DCR is around 700. What hashrate do you get for Pascal? What is better for dual mining? Thanks

[TechPark]

I've been mining Eth solo no problem on dwarfpool with this miner for a couple weeks now. After many attempts I've been unsuccessful in mining Decred also. The Ethereum pool works fine, but the Decred pool is unresponsive. I have tried multiple pools, with many different configurations in the Start.batch file, even with many different crimson editions, and even with multiple different versions of Claymore's Dual Eth. Miner. I'm still getting the same error with both of my rigs that run different cards. (Sapphire RX 470's, or XFX R9 280x's) It will say it connects with "DCR: Stratum - Connected dcr.suprnova.cc:2252" at start up, but then it gives me an error message of "DCR: Job timeout, disconnect, retry in 20 sec..." and hashes for 0.000 DCR on all gpus. Any tips to help me resolve this issue would be appreciated. 
thanks.

setx GPU_force_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us.dwarfpool.com:8008 -ewal xxx -epsw x -dpool dcr.suprnova.cc:2252 -dwal xxx  -dpsw x -allpools 1 -tt 68

this is not Claymore's miner issue. This is an issue with your connection to the pool. Why dont you ask Suprnova support?

[TechPark]

Hello, i'm new to mining, and currently running my RX 480 8gb eth+pasc.

I was wondering if i cna throw my gtx 960 in my machine and mine with both cards, and if it would be difficult to setup.

Maybe it's impossible, maybe someone can send me in a direction where i can find more info?

GTX 960 is not profitable at all. I doubt that you want to do this exercise just for fun.

[Claymore]

I had my doubts about v9.1 performance few pages back. In the end it were stats of ethermine that got me confused

ethermine pool had some problems yesterday, a lot of people noticed it.

Is this the sha256 checksums for your Window ETH miners?
EthDcrMiner64.exe (ETH 9.1)
1e3dce0e3dd3b7ca7e96d731ccc2cfc778dcaa5d9e550676820ff710ebe9fdd8

EthDcrMiner64.exe (ETH 9.0)
ce3734f66a90eeebb3d4a37f267cb6fa879c769cdc00768f1979e3da9535f239

Yes.

[WBF1]

@Claymore is there any expected power consumption differences between ASM 1 and ASM 2?

[1234xm]

one question regarding pools.

friend of mine told me, to got to dwarfpool becouse you get more shares. i was almost all the time on ethermine.

so, i went to try it,and i was also more aware about the shares. i cheaced on what to mine, how much i should get with my cards (it say with 327 mh i can get 0.53 ether per day).
in dwarfpool it say, i can get only 0.48(last hours 0.46ether per day, but with 350 mhs, 23mh more that it say on wtm page). where is the catch? do i need to calculated also uncorfirmed balance?

[Claymore]

@Claymore is there any expected power consumption differences between ASM 1 and ASM 2?

I did not compare them about power consumption, but they must be similar.

[JustJohnny]

I've been mining Eth solo no problem on dwarfpool with this miner for a couple weeks now. After many attempts I've been unsuccessful in mining Decred also. The Ethereum pool works fine, but the Decred pool is unresponsive. I have tried multiple pools, with many different configurations in the Start.batch file, even with many different crimson editions, and even with multiple different versions of Claymore's Dual Eth. Miner. I'm still getting the same error with both of my rigs that run different cards. (Sapphire RX 470's, or XFX R9 280x's) It will say it connects with "DCR: Stratum - Connected dcr.suprnova.cc:2252" at start up, but then it gives me an error message of "DCR: Job timeout, disconnect, retry in 20 sec..." and hashes for 0.000 DCR on all gpus. Any tips to help me resolve this issue would be appreciated. 
thanks.

setx GPU_force_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us.dwarfpool.com:8008 -ewal xxx -epsw x -dpool dcr.suprnova.cc:2252 -dwal xxx  -dpsw x -allpools 1 -tt 68

this is not Claymore's miner issue. This is an issue with your connection to the pool. Why dont you ask Suprnova support?

I’m experiencing the same issue, solo mining working fine but setting up dual mining either one pool or both gets timeouts receiving job. Also tried different pools and versions, same problem.
Starting to suspect my external Router/FW is blocking the traffic.

[Ursul0]

I had my doubts about v9.1 performance few pages back. In the end it were stats of ethermine that got me confused

ethermine pool had some problems yesterday, a lot of people noticed it.

Is this the sha256 checksums for your Window ETH miners?

EthDcrMiner64.exe (ETH 9.1)
1e3dce0e3dd3b7ca7e96d731ccc2cfc778dcaa5d9e550676820ff710ebe9fdd8

EthDcrMiner64.exe (ETH 9.0)
ce3734f66a90eeebb3d4a37f267cb6fa879c769cdc00768f1979e3da9535f239

9.1 is (https://www.virustotal.com/en/file/1e3dce0e3dd3b7ca7e96d731ccc2cfc778dcaa5d9e550676820ff710ebe9fdd8/analysis/1492355216/)

[papasmurf1337]

@Claymore

Can you define this exacly:

You can also use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in epools.txt.

what goes in config.txt and would be in start.bat script do i use ETHadress.%WORKER% or ?

[delle54]

9.1 is (https://www.virustotal.com/en/file/1e3dce0e3dd3b7ca7e96d731ccc2cfc778dcaa5d9e550676820ff710ebe9fdd8/analysis/1492355216/)

Miners are often recognised as viruses. Don't worry. Just make an exception in your AV software.