Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[tperalta82]

DCR vs PASC. Which one earns more money dual mining or is it a toss up?

With DCR you will actualy much more profit now.

Due to PPLNS does it take a day or two to see the real profit? I started earlier today and so far earning have been very low. Much lower than I would have made mining PASC. I am hoping after 24 hours what I make per block will go up. I am mining DCR on coinmine.pl.

Well you can go to whattomine and make the calcs there, pretty accurate. Right now I am making around 1.6 DCR per week, which is not bad..

[Toxic_Cat]

ClayMore 9.2 is strange

-asm 2, ETH SOLO

ASUS, Gigabyte, MSI / Hynix, Samsung / 470, 480

SO -dcri is: 3, 13, 25, 45, 50, 55
On all 6 rigs diffrent -dcri 

BUT hashrate increase if compare with ClayMore 8.1

[Kaller]

ClayMore 9.2 is strange

-asm 2, ETH SOLO

ASUS, Gigabyte, MSI / Hynix, Samsung / 470, 480

SO -dcri is: 3, 13, 25, 45, 50, 55
On all 6 rigs diffrent -dcri 

BUT hashrate increase if compare with ClayMore 8.1

The next release of the miner might solve this problem.

[Claymore]

ClayMore 9.2 is strange

-asm 2, ETH SOLO

ASUS, Gigabyte, MSI / Hynix, Samsung / 470, 480

SO -dcri is: 3, 13, 25, 45, 50, 55
On all 6 rigs diffrent -dcri 

BUT hashrate increase if compare with ClayMore 8.1

The next release of the miner might solve this problem.

For ASM mode, best -dcri value depends on many factors like clocks, memory manufacturer, etc. It is not a bug. If you don't like to spend time trying to find best -dcri value - use "-asm 0" though it can be a bit slower. May be in future I will add automatic adjustment for -dcri.

I managed to get speed similar to v9.0 with speed stability better than in v9.2. I will release new version in 2-3 days including this and some other improvements.

@Claymore the release will be today?

Yes I will release new version within a few hours.

[Maticul]

Yes I will release new version within a few hours.

Is that faster for R9 390?

[batko]

ClayMore 9.2 is strange

-asm 2, ETH SOLO

ASUS, Gigabyte, MSI / Hynix, Samsung / 470, 480

SO -dcri is: 3, 13, 25, 45, 50, 55
On all 6 rigs diffrent -dcri 

BUT hashrate increase if compare with ClayMore 8.1

The next release of the miner might solve this problem.

For ASM mode, best -dcri value depends on many factors like clocks, memory manufacturer, etc. It is not a bug. If you don't like to spend time trying to find best -dcri value - use "-asm 0" though it can be a bit slower. May be in future I will add automatic adjustment for -dcri.

I managed to get speed similar to v9.0 with speed stability better than in v9.2. I will release new version in 2-3 days including this and some other improvements.

@Claymore the release will be today?

Yes I will release new version within a few hours.

great news thanks claymore!

[Claymore]

v9.3:

- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

[DevonMiner]

v9.3:

- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

Oh bugger ... just spent the last hour updating all my rigs to 9.2 ... LOL 

Thanks Claymore, not complaining!

[Claymore]

v9.3:
- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

Oh bugger ... just spent the last hour updating all my rigs to 9.2 ... LOL  
Thanks Claymore, not complaining!

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

[marvykkio]

Slower than 9.1 and 9.2, and no speed improvement on etc only

back 9.2 version

[Claymore]

Slower than 9.1 and 9.2, and no speed improvement on etc only
back 9.2 version

It would be very useful to mention what GPU you use.

[Vasyok55555]

The GPU does not change the order of temperature. Version 9.3

[totikk]

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

Hi! Claymore Two suggestion:
1) Can you add -login -pass? for connecting to rigs from EthMan, than no needed "-mport -3333"
2) Can you add possibility for connecting to rigs behind NAT ? Like EthMan_server on "main computer" and all rigs will connect there for providing monitoring\control...

[lpedretti]

ETH: 04/29/17-17:09:50 - New job from eth-us-east1.nanopool.org:9999
ETH - Total Speed: 117.170 Mh/s, Total Shares: 27, Rejected: 0, Time: 00:21
ETH: GPU0 29.127 Mh/s, GPU1 29.127 Mh/s, GPU2 29.789 Mh/s, GPU3 29.127 Mh/s
ETH: 04/29/17-17:09:53 - New job from eth-us-east1.nanopool.org:9999
ETH - Total Speed: 117.170 Mh/s, Total Shares: 27, Rejected: 0, Time: 00:21
ETH: GPU0 29.127 Mh/s, GPU1 29.789 Mh/s, GPU2 29.127 Mh/s, GPU3 29.127 Mh/s
Unhandled signal in divisionErrorHandler()
./singleeth-nano-br.sh: line 7:  1598 Aborted                 (core dumped)

Lubuntu 16.04.2 amd gpu-pro 17.10

Any ideas?

Thanx
Best regards!

[delle54]

Slower than 9.1 and 9.2, and no speed improvement on etc only

back 9.2 version

For me a bit faster with -dcri 8 on ETH only.

THX Claymore.

[unsoindovo]

hi claymore...
i'm on win 10 pro 64 bit
drivers radeon-crimson-relive-17.4.3-minimalsetup-170417_web.exe
i have this issue with RX 470 nitro+ 4gb 4GB after flashing silent bios with an Anorack .rom

i read here:
http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx
it seems who with this crimson version the bios flash fallback problem, is already fixed...
do you think is not true???
i flash with this bios :
https://anorak.tech/uploads/default/original/1X/c57142ada8c575cac57f17b55042defbcd01ad8c.rom
https://anorak.tech/uploads/default/original/1X/36832d1374affe7936835c1c7c127b3973d59c2d.rom
https://anorak.tech/uploads/default/original/1X/2b19088985070fc0ad9adc1be67791743fa13532.rom
but the problem is everytime the same...

thank you very much for your help.

i fixed it:
i follow the tip to install 16.11.* drivers, after disinstal latest with DDU AMD utilily.. and now all works fine
thank you all..
now o get 27,6Mhs from 22,6Mhs

[Ursul0]

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

Hi! Claymore Two suggestion:
1) Can you add -login -pass? for connecting to rigs from EthMan, than no needed "-mport -3333"
2) Can you add possibility for connecting to rigs behind NAT ? Like EthMan_server on "main computer" and all rigs will connect there for providing monitoring\control...

one word -  OpenVPN

[Ursul0]

v9.3:
- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

Oh bugger ... just spent the last hour updating all my rigs to 9.2 ... LOL  
Thanks Claymore, not complaining!

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

That could be tricky... but interesting.

not sure if 9.3 is any better it still seems to need "-eqlim 288" form my 470s and still jumps around 0.3-1.3% of hash

EDIT: well maybe it has a notch higher speed than 9.2 ... like 0.2%

[reflexmk]

v9.3:
- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

Oh bugger ... just spent the last hour updating all my rigs to 9.2 ... LOL  
Thanks Claymore, not complaining!

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

That could be tricky... but interesting.

not sure if 9.3 is any better it still seems to need "-eqlim 288" form my 470s and still jumps around 0.3-1.3% of hash

whats the number for 480? thanks

[Teress]

v9.3:
- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

Oh bugger ... just spent the last hour updating all my rigs to 9.2 ... LOL  
Thanks Claymore, not complaining!

Soon I will add ability to update miners on all rigs with EthMan so it will be easy.

That could be tricky... but interesting.

not sure if 9.3 is any better it still seems to need "-eqlim 288" form my 470s and still jumps around 0.3-1.3% of hash

For me 9.3 is jumping from 84 to 77 Mhs somethimes 77 four times in a row