big al
Member
Offline
Activity: 140
Merit: 10
|
|
March 14, 2018, 10:01:05 PM |
|
i noticed. thanks. gosh, i was spoiled by higher hashrate already with the new kernels. using old kernels, hashrate swings are noticeable (i dont know if its because my oc has been messed up) and of course the little decrease in hashrate. guess what, i came back deleting -oldkernels parameter and enjoy higher hashrate, i'll just readjust mclocks whenever incorrect share is logged. cant go back to old hashrates/kernels anymore. atleast we now have options to revert back to old kernels without downgrading. thanks sir You may not get improvement with lower clocks. Do you have modified ram timing straps? When I get home I will compare stock bios with new kernel vs modified bios with old kernel in 11.5 really? isn't it the reported hashrate is an indication of speed? as long as you get no hwinfo errors and incorrect shares? I had 4% incorrect shares no matter how much I slowed down in 11.x Plus instability. It's all gone with 11.5 running old kernels
|
|
|
|
big al
Member
Offline
Activity: 140
Merit: 10
|
|
March 14, 2018, 10:05:31 PM |
|
Whats ur 2nd coin you mine using keccak if dont mind me asking? I was mining Pascal but it is going down the drain...
all dual coins are dead, mine eth only. Says who? It all depends on the situation. I pay 10 cents CAD per kwhr for power. If I mine smartcash it pays the whole power bill for that card and then some.
|
|
|
|
Marvell2
|
|
March 14, 2018, 10:25:13 PM |
|
Whats ur 2nd coin you mine using keccak if dont mind me asking? I was mining Pascal but it is going down the drain...
all dual coins are dead, mine eth only. Says who? It all depends on the situation. I pay 10 cents CAD per kwhr for power. If I mine smartcash it pays the whole power bill for that card and then some. smartcash more profitable than verge ?
|
|
|
|
Marvell2
|
|
March 14, 2018, 10:34:37 PM |
|
@claymore when will you add the ability to solo mine the new dual coins ? The pools are still really not up to par
|
|
|
|
|
Vann
|
|
March 14, 2018, 11:10:52 PM |
|
Whats ur 2nd coin you mine using keccak if dont mind me asking? I was mining Pascal but it is going down the drain...
all dual coins are dead, mine eth only. Says who? It all depends on the situation. I pay 10 cents CAD per kwhr for power. If I mine smartcash it pays the whole power bill for that card and then some. smartcash more profitable than verge ? Yes. For RX 570's, XVG is 1 cent profit per day after the incresed power and that isn't counting that you get much less from pools than what the calculator shows. http://whattomine.com/coins/220-xvg-blake-2s?utf8=%E2%9C%93&hr=1100.0&p=40.0&fee=3.0&cost=0.12&hcost=0.0&commit=Calculate
|
|
|
|
big al
Member
Offline
Activity: 140
Merit: 10
|
|
March 14, 2018, 11:29:37 PM Last edit: March 14, 2018, 11:41:09 PM by big al |
|
smartcash more profitable than verge ?
Yes I am using the nicehash keccak pool so you have to account for that too. I think that is the best way to go. Keccak profit will disappear once Nicehash upgrades to Claymore 11.x
|
|
|
|
mcsnifferson
Newbie
Offline
Activity: 20
Merit: 0
|
|
March 15, 2018, 01:55:17 AM |
|
I just switched a rig over from ETC+XVG (blake2s) to ETC+SMART (keccak). But my ETC hashrate on RX580s went from 31 mh/s down to 11 mh/s with keccak as 2nd coin. Obviously this isn't going to work for me.
Anyone else seeing this with keccak as 2nd coin?
|
|
|
|
john1010
|
|
March 15, 2018, 02:30:25 AM Last edit: March 15, 2018, 04:27:17 AM by john1010 |
|
I am using now the latest but a little bit confusion about the -dcri value, in the previous version the miner is not asking that thing, oh by the way what is the exactly work of dcri and what is the best value to put? I am using rx 570 cards mixed with 4 and 8gb memory, ONly single eth mining
GPU #0: apply best detected -dcri value: 12 GPU0 t=58C fan=0%, GPU1 t=53C fan=66%, GPU2 t=49C fan=0%, GPU3 t=51C fan=0%, GPU4 t=49C fan=0%, GPU5 t=51C fan=0%, GPU6 t=53C fan=0%, GPU7 t=51C fan=54%, GPU8 t=58C fan=0%, GPU9 t=57C fan=0%, GPU10 t=52C fan=0%, GPU11 t=58C fan=0% GPU #1: apply best detected -dcri value: 6 GPU #2: apply best detected -dcri value: 8 GPU #3: apply best detected -dcri value: 6 GPU #4: apply best detected -dcri value: 8 GPU #5: apply best detected -dcri value: 8 GPU #6: apply best detected -dcri value: 8 GPU #7: apply best detected -dcri value: 8 GPU #8: apply best detected -dcri value: 12 GPU #9: apply best detected -dcri value: 8 GPU #10: apply best detected -dcri value: 8 GPU #11: apply best detected -dcri value: 10 Automatic detection of best -dcri values completed
P.S
Is it necessary to put the -oldkernels value? Kindly need some help.
Thanks
|
|
|
|
53nsk
Newbie
Offline
Activity: 26
Merit: 0
|
|
March 15, 2018, 02:44:51 AM |
|
I just switched a rig over from ETC+XVG (blake2s) to ETC+SMART (keccak). But my ETC hashrate on RX580s went from 31 mh/s down to 11 mh/s with keccak as 2nd coin. Obviously this isn't going to work for me.
Anyone else seeing this with keccak as 2nd coin?
Reduce -dcri to 7 at least.
|
|
|
|
big al
Member
Offline
Activity: 140
Merit: 10
|
|
March 15, 2018, 02:46:52 AM Last edit: March 15, 2018, 03:30:01 AM by big al |
|
I just switched a rig over from ETC+XVG (blake2s) to ETC+SMART (keccak). But my ETC hashrate on RX580s went from 31 mh/s down to 11 mh/s with keccak as 2nd coin. Obviously this isn't going to work for me.
Anyone else seeing this with keccak as 2nd coin?
Try dcri of 6 7 will get you a bit more keccak but more heat and instability Play with it. Don't be afraid to have the "hotter" GPUs at 6 and the cooler more stable ones at 7
|
|
|
|
big al
Member
Offline
Activity: 140
Merit: 10
|
|
March 15, 2018, 02:49:28 AM |
|
I am using now the latest but a little bit confusion about the -dcri value in the previous version the miner is not asking that thing, oh by the way what is exactly work of dcri and what is the best value to put? I am using rx 570 cards mixed with 4 and 8gb memory
GPU #0: apply best detected -dcri value: 12 GPU0 t=58C fan=0%, GPU1 t=53C fan=66%, GPU2 t=49C fan=0%, GPU3 t=51C fan=0%, GPU4 t=49C fan=0%, GPU5 t=51C fan=0%, GPU6 t=53C fan=0%, GPU7 t=51C fan=54%, GPU8 t=58C fan=0%, GPU9 t=57C fan=0%, GPU10 t=52C fan=0%, GPU11 t=58C fan=0% GPU #1: apply best detected -dcri value: 6 GPU #2: apply best detected -dcri value: 8 GPU #3: apply best detected -dcri value: 6 GPU #4: apply best detected -dcri value: 8 GPU #5: apply best detected -dcri value: 8 GPU #6: apply best detected -dcri value: 8 GPU #7: apply best detected -dcri value: 8 GPU #8: apply best detected -dcri value: 12 GPU #9: apply best detected -dcri value: 8 GPU #10: apply best detected -dcri value: 8 GPU #11: apply best detected -dcri value: 10 Automatic detection of best -dcri values completed
P.S
Is it necessary to put the -oldkernels value? Kindly need some help.
Thanks
If you are single mining perfect! If you want to enter them in the bat file that will save time. They will not change unless you start dual mining. Only apply oldkernels if you have instability or lots of rejected shares. Try it either way. It will be slower with it applied.
|
|
|
|
Maniac9331
Newbie
Offline
Activity: 20
Merit: 0
|
|
March 15, 2018, 03:03:53 AM |
|
v11.5:
- added "-oldkernels" option (AMD GPUs only), you can try "-oldkernels 1" to use old-style GPU kernels from v10, they can be more stable for hard OC and custom BIOSes. - a bit reduced stale shares for Nvidia GPUs.
Mr Claymore , can you please add the oldkernels for nvidia also , i have tried all versions after 10.0 and none of them work as good as 10.0 , i dont know if its just me or my cards, (Nvidia 1070 FE)but any other version of miner after10.0 either crashes , or reports 50-80 mhs less to the pool. just make a version of 10.0 and add DAG Epoch to 299 , lot of us dont care for 1.5% more Mhs if we have to keep our rigs 2-4% of time down due to crashes or instability. i believe ppl with lots of miners will agree for a more stable miner then over 1.5% hash more in runtime. let the kids follow phoenix or whatever miner its out there and get wet over 3 shares more , they will all come back after they realize they spend a shitload of time troubleshooting rigs and tweaking clocks just to find out that they lose way way more than they think they win seeing in runtime slightly bigger numbers. so please focus more on stability and reliability and efficiency of the miner then chasing ghost high numbers. thankyou. (maybe you can make a really stable version based on old stuff "10.0" and add as section called experimenting or testing or beta or whatever upload it to get tested and work from there on the experimental versions ) Thanks again for your work
|
|
|
|
muzuca
Member
Offline
Activity: 182
Merit: 13
|
|
March 15, 2018, 03:52:58 AM |
|
hey guys, how I disable the dual mining just for one gpu? I'm using -dcri 44,44,0,44
but isn't work.
|
|
|
|
Marvell2
|
|
March 15, 2018, 04:23:18 AM |
|
I wont lie , I did have a few rigs unsable with 11.1 - 11.3
What i found is if i turned off dual mining they were fine, so I just left them be
@claymore If our rigs are relatively stable , should we just stay with 11.4 ?
for Nvidia rigs is it really worth it to go 11.5 ? some are saying its unstable , why would that be
|
|
|
|
Vann
|
|
March 15, 2018, 04:30:28 AM |
|
hey guys, how I disable the dual mining just for one gpu? I'm using -dcri 44,44,0,44
but isn't work.
-mode Select mining mode: "-mode 0" (default) means dual Ethereum + Decred/Siacoin/Lbry mining mode. "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2). For systems with more than 10 GPUs: use letters to specify indexes more than 9, for example, "a" means index 10, "b" means index 11, etc. You can also hit the keyboard key for the GPU index number shown in the Claymore miner of the GPU you want to turn off dual mining for and it will cycle the GPU single/dual mining on or off.
|
|
|
|
john1010
|
|
March 15, 2018, 04:32:04 AM Last edit: March 15, 2018, 01:14:47 PM by john1010 |
|
Been running 10.6....has been rock solid. bit the bullet and moved to 11.5 and hash improvements 3.5 mhs per rig...(better than nothing)..
rig 1 x6 580s rig 2 x6 580s
i forgot to add -oldkernal 1 initially and got a stack of memory errors...and the errors dramatically reduced when -oldkernal 1 was added and hash rate stayed the same.
just notices some instability with the hash rates..jumps to and from 173-181 a fair bit....
my current config:
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eth-asia1.nanopool.org:9999 -ewal xxx.rig1/xxx -epsw x -mode 1 -ftime 10 -oldkernels 1
any help would be fantastic.
thanks.
cheers
Is 11.6 is out where did you get that version? I can only see that the available right now in the main page is 11.5 how come that you already used the 11.6 version? If it is out do you have alink? ------------------------------------------ Oh I see you already corrected the 11.6, anyway i wont change mine.
|
|
|
|
muzuca
Member
Offline
Activity: 182
Merit: 13
|
|
March 15, 2018, 04:44:43 AM |
|
hey guys, how I disable the dual mining just for one gpu? I'm using -dcri 44,44,0,44
but isn't work.
-mode Select mining mode: "-mode 0" (default) means dual Ethereum + Decred/Siacoin/Lbry mining mode. "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2). For systems with more than 10 GPUs: use letters to specify indexes more than 9, for example, "a" means index 10, "b" means index 11, etc. You can also hit the keyboard key for the GPU index number shown in the Claymore miner of the GPU you want to turn off dual mining for and it will cycle the GPU single/dual mining on or off. Great! Tks.
|
|
|
|
big al
Member
Offline
Activity: 140
Merit: 10
|
|
March 15, 2018, 05:14:11 AM |
|
Been running 10.6....has been rock solid. bit the bullet and moved to 11.5 and hash improvements 3.5 mhs per rig...(better than nothing)..
rig 1 x6 580s rig 2 x6 580s
i forgot to add -oldkernal 1 initially and got a stack of memory errors...and the errors dramatically reduced when -oldkernal 1 was added and hash rate stayed the same.
just notices some instability with the hash rates..jumps to and from 173-181 a fair bit....
my current config:
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eth-asia1.nanopool.org:9999 -ewal xxx.rig1/xxx -epsw x -mode 1 -ftime 10 -oldkernels 1
any help would be fantastic.
thanks.
cheers
I too have noticed some fluctuation. 3 to 5% per card. I have bios modded rx580s. Very stable though. I am dual mining keccac. 0 rejected and incorrect. Some stale on keccac none on ETH. Hit Z to have it auto tune in mode 1.
|
|
|
|
kgminer
Jr. Member
Offline
Activity: 100
Merit: 6
|
|
March 15, 2018, 05:37:14 AM |
|
Can someone please help or advise
Claymore doesn't show does not GPU temperature and fan status so I can't use fan and temrature related controls. Commands like -tt, -ttdcr, -ttli, -tstop, -tstart, -fanmax, -fanmin
RX 580 pulse 8 GB GPUs Driver version 23.20.782.0 Driver date 20/10/2017 Radeon-Software-Crimson-Relive-Edition-17.10.2 MotherBoard B250 MINING EXPERT Windows 10 ent edition x64
I am able to control fan and temprature via MSI afterburner
|
|
|
|
|