|
Bargraphics
|
 |
October 29, 2013, 02:04:08 PM |
|
Hey guys,
I believe KnC Updated the Firmware in their hosted units.
It's looking like my Jupiters are getting 600gh+ (650gh on some and 700gh on one)
I'll need more time to see if this is variation but it looks like this new firmware could be a massive increase in hashrate.
Wanted to know if anyone is experiencing similar with their hosted units.
(The update appears to have happened in the past hour)
My hosted units have gone up and down a few times in the past few hours. The portal hashrate and the pool rates don't match very well at all. Did you see the increase in the pool or the portal? My portal graph seems pretty stable (some a bit up and some a bit down) Due to the stops and starts, can't get a good read from Elegius yet. Portal looks same as before besides them going down for what I assume is the FW update. http://eligius.st/~wizkid057/newstats/userstats.php/1FscNBYzd5CqDzUVQ9YapLQNtLbswkM4NLCheck out the worker tab it looks like it's coming back down but still. I want to wait it out for a 3 hour average before saying that this is a huge improvement. |
|
|
|
|
edgar
Legendary
 Offline
Activity: 1848
Merit: 1001
|
|
October 29, 2013, 02:07:49 PM |
|
interestingly, after i updated my pool info to include stratum+tcp:// my jupiter HR dropped from 539 to 445.
nothing else at all was adjusted or altered...
i have just deleted the prefix an the GH/s is rising slowly but definitely.
ROLL ON fw .98!!
|
|
|
|
|
|
|
|
|
sickpig
Legendary
Offline
Activity: 1260
Merit: 1008
|
|
October 29, 2013, 02:18:31 PM |
|
|
Bitcoin is a participatory system which ought to respect the right of self determinism of all of its users - Gregory Maxwell.
|
|
|
|
WastedLTC
|
|
October 29, 2013, 02:19:11 PM |
|
Mine look similar, but I think they will fall back to the average speed. Even my 22 minute is way off right now. We will see! |
|
|
|
|
|
|
adrd
Newbie
Offline
Activity: 39
Merit: 0
|
|
October 29, 2013, 02:22:21 PM |
|
|
|
|
|
|
chrono030
Member
Offline
Activity: 114
Merit: 10
|
|
October 29, 2013, 02:23:03 PM |
|
I can't seem to download the file, it failed. - Edit - solution posted before me  |
|
|
|
|
xyzzy099
Legendary
Offline
Activity: 1066
Merit: 1098
|
|
October 29, 2013, 02:23:52 PM |
|
I can't seem to download the file, it failed. - Edit - solution posted before me Use the link on the support page. |
Libertarians: Diligently plotting to take over the world and leave you alone.
|
|
|
|
soapmodem
|
|
October 29, 2013, 02:26:19 PM |
|
Early notes on 0.98...
- cgminer updated to 3.6.6
- getting fewer hardware errors
- no change in flushwork frequency
- performance roughly 2% higher
- temps slightly higher
|
|
|
|
|
carlotech
Member
Offline
Activity: 92
Merit: 10
|
|
October 29, 2013, 02:30:45 PM |
|
any reports on .98 firmwares?  |
|
|
|
|
|
rolling
|
|
October 29, 2013, 02:33:08 PM |
|
any reports on .98 firmwares? I am testing on my poor performing units and so far looks great! The disabled cores now seem to have a smaller negative effect on overall hashing power. |
|
|
|
|
chrono030
Member
Offline
Activity: 114
Merit: 10
|
|
October 29, 2013, 02:34:37 PM |
|
any reports on .98 firmwares? So far, my hashrate in CG miner has gone from 540 gh/s to 550 cgminer version 3.6.6 - Started: [2013-10-29 14:29:59] -------------------------------------------------------------------------------- (5s):627.6G (avg):566.4Gh/s | A:27648 R:512 HW:594 WU:7846.7/m ST: 2 SS: 0 NB: 1 LW: 29933 GF: 0 RF: 0 Take this all with a grain of salt, it has been hashing for about 20 seconds - havent applied bertmod quite yet. |
|
|
|
|
edgar
Legendary
Offline
Activity: 1848
Merit: 1001
|
|
October 29, 2013, 02:35:38 PM
Last edit: October 29, 2013, 03:08:24 PM by edgar |
|
is bertmod & enablecores the same thing?
i have 2 separate .bin files but neither 'seem' to change anything.
|
|
|
|
|
sickpig
Legendary
Offline
Activity: 1260
Merit: 1008
|
|
October 29, 2013, 02:36:46 PM |
|
any reports on .98 firmwares? So far, my hashrate in CG miner has gone from 540 gh/s to 550 cgminer version 3.6.6 - Started: [2013-10-29 14:29:59] -------------------------------------------------------------------------------- (5s):627.6G (avg):566.4Gh/s | A:27648 R:512 HW:594 WU:7846.7/m ST: 2 SS: 0 NB: 1 LW: 29933 GF: 0 RF: 0 Take this all with a grain of salt, it has been hashing for about 20 seconds - havent applied bertmod quite yet. what was your hash rate with your prev fw? |
Bitcoin is a participatory system which ought to respect the right of self determinism of all of its users - Gregory Maxwell.
|
|
|
jelin1984
Legendary
Offline
Activity: 2408
Merit: 1004
|
|
October 29, 2013, 02:36:57 PM |
|
yes the same
|
|
|
|
|
|
rolling
|
|
October 29, 2013, 02:37:17 PM |
|
is bertmod & enablecores the same thing?
NO! |
|
|
|
|
|
soapmodem
|
|
October 29, 2013, 02:37:20 PM |
|
Careful with this one, guys.. monitor your temps. My machines are running hot. Each chip about 2-4 degrees higher on 0.9.8.
Rolling back to 0.97 for now.
|
|
|
|
|
sickpig
Legendary
Offline
Activity: 1260
Merit: 1008
|
|
October 29, 2013, 02:37:38 PM |
|
is bertmod & enablecores the same thing?
not at all |
Bitcoin is a participatory system which ought to respect the right of self determinism of all of its users - Gregory Maxwell.
|
|
|
|
