Swedish ASIC miner company kncminer.com

[Searing]

Ok, left bags covering most of the heatsinks overnight and stats are still better. The temp sensor must be in the chip because otherwise how would I have shown it being hotter with an open case? Edit: used an IR temp sensor and highest temp I can find anywhere is 130F, so even though the temp sensor may not be in the chip, I am still below the temp of 70C that many are finding ideal. 130F is only 55C. So this method is only if your unit is in a cold basement like mine.

hmmm my unit is in a cold bsmt 41c on 2 units and 27c and 32c on other two...the bsmt is 62F...i'm running .95 at 555gh stable (it drifts up 10-15gh and back down) and 547.7ave ...i'm doing like 537.7 stable on slush and I have the case open and 2 fans both 3" both in front right and left blowing crosswise (x pattern) across the miner

from posts here seems my unit works better then most...(or am I in denial) my impression ...and thus fence sitting on going to .98

also do the 'correct' error formula (not using knc cgminer hw errors alone) and I get a 5.5% or so error rate

the only other thing is once in a great while i'll have 1 core 4-86? enbable on and then off ..but prob only every 3hrs or so at most is my guess

so if your unit is ying my unit is yang

ying/yang

go figure..unless I'm missing something oh...my work unit is 7767.6 or some such....again it is stock miner .95 came in a destroyed box filled with rainwater ..I'm still going with the theory that the reason it works as well (or at all) is they had to hand carry the box/unit with 2 hands everywhere or it would have fallen thru the soggy box that was ripped in half...there fore it never "took flight" like I suspect other units did in such a large if light box....or I'm full of it..but anyway

whatever ...I usually walk by the unit and avert my eyes...I'm not worthy....its the boss

anywhoo....from where I see it right now correct me if I'm full of it (likely)

Searing

[1531719458]

1531719458

[1531719458]

1531719458

[FiatKiller]

Ok, left bags covering most of the heatsinks overnight and stats are still better. The temp sensor must be in the chip because otherwise how would I have shown it being hotter with an open case? Edit: used an IR temp sensor and highest temp I can find anywhere is 130F, so even though the temp sensor may not be in the chip, I am still below the temp of 70C that many are finding ideal. 130F is only 55C. So this method is only if your unit is in a cold basement like mine.

hmmm my unit is in a cold bsmt 41c on 2 units and 27c and 32c on other two...the bsmt is 62F...i'm running .95 at 555gh stable (it drifts up 10-15gh and back down) and 547.7ave ...i'm doing like 537.7 stable on slush and I have the case open and 2 fans both 3" both in front right and left blowing crosswise (x pattern) across the miner

from posts here seems my unit works better then most...(or am I in denial) my impression ...and thus fence sitting on going to .98

also do the 'correct' error formula (not using knc cgminer hw errors alone) and I get a 5.5% or so error rate

the only other thing is once in a great while i'll have 1 core 4-86? enbable on and then off ..but prob only every 3hrs or so at most is my guess

so if your unit is ying my unit is yang

ying/yang

go figure..unless I'm missing something oh...my work unit is 7767.6 or some such....again it is stock miner .95 came in a destroyed box filled with rainwater ..I'm still going with the theory that the reason it works as well (or at all) is they had to hand carry the box/unit with 2 hands everywhere or it would have fallen thru the soggy box that was ripped in half...there fore it never "took flight" like I suspect other units did in such a large if light box....or I'm full of it..but anyway

whatever ...I usually walk by the unit and avert my eyes...I'm not worthy....its the boss

anywhoo....from where I see it right now correct me if I'm full of it (likely)

Searing

Yep, you are doing pretty good. No reason to change anything if you are happy and don't want to risk it.

[rolling]

What the hell is this crap.  

They send the documents ahead to Ohio before the package actually arrives there.  I got mine delivered in Los Angeles the same day it left Ohio.

[sbfree]

Just shy of 24hrs on .98 my Saturn is Extremely Happy

Here are the stats

At the server (most important in my eyes)

bitminer_knc   281.29 GH/s   59,519k (99.83%)   -  24hr average is 279GH/s

At CGminer (putty window)

(5s):285.7G (avg):284.5Gh/s | A:5484800  R:70784  HW:110301  WU:3982.7/m    -   HW error at 2% now (prior 20% HW errors)

Chip Temps

50.5c and 47c   (please note: With better firmware, TEMPS. SEEM TO PLAY LESS OF A ROLE.) In others words, Don't Fry your unit!

[lemonte]

Does anyone know when shipping begins for November orders?

[Mogumodz]

Here are stats for a Saturn after a week running on 0.96 pulling 290w at the wall.

cgminer version 3.4.0 - Started: [2013-10-23 13:02:05]
--------------------------------------------------------------------------------
 (5s):309.5G (avg):279.9Gh/s | A:39205673  R:86502  HW:172957  WU:3906.5/m
 ST: 2  SS: 0  NB: 1380  LW: 41352098  GF: 5  RF: 1
 Connected to stratum.eligius.st diff 63 with stratum as user
 Block: 00012d548fe31ce8...  Diff:391M  Started: [15:34:16]  Best share: 57.2M
--------------------------------------------------------------------------------
 [P]ool management [S}ettings [D]isplay options [Q]uit
 KnC 0:                | 280.4G/279.9Gh/s | A:39205799 R:86502 HW:172957 WU:3906

ASIC slot #1 56.0 ℃
ASIC slot #5 51.0 ℃

At the pool the top 2 averages for the miner are;

12 hours 281.06 Gh/s
3 hours 279.97 Gh/s

[2weiX]

applied .98 to my jupiter, now hashing at 150GH/s instead of 500.

 

[btc_uzr]

applied .98 to my jupiter, now hashing at 150GH/s instead of 500.

 

try enablecores.bin, someone was mentioning it helped in his case

if your miner runs smooth on v0.95, it *might* run with lower performance on 0.98 as some have reported

however your 500 are too low anyway,
check the file asic_test in /config, or install bertmod on a previous firmware version to figure out what's the issue (dead vram, bad cores, or else)

[cognoscente]

applied .98 to my jupiter, now hashing at 150GH/s instead of 500.

 

It took my Jupiter 12 hours to 'get in the groove' after updating to .98.  Almost rolled back, but now it's a steady 15GH/s improvement.

[thomashrev89]

.98 gives me 564 avg 

[-Redacted-]

Is there a link to bertmod?  It is just web page changes, right?

[genykm]

Lucky you all, my Saturn shows only 220 GH/s due to HW errors on all firmwares  

[demonmaestro]

Miner Received.   

Shipped out Monday got to me Wednesday.

Although got some issues..
It came with 0.95 firmware. only getting at max 80Gh/s 

Updated to 0.98 Firmware,
Now getting a nice "404 - Not Found"
I got to my ipaddress of 192.168.1.2 and it auto refreshes to http://192.168.1.2/cgi-bin/get_status.cgi and gives me that 404

How to fix?

[ASIC-K]

you have to clear your browser cache.

[terman45x]

Seems a lot of problems can happen when going to .98, but I was lucky (no problems) and now I have +20GH  

TY and happy hashing everyone

[vesperwillow]

wow, also just noticed that after around 115 Million submitted shares I can finally say I am official and found a BLOCK for the BTC community. I was starting to feel left out....1 less on the bucket list.

Solo mining or pool?

Would be a losing battle if I was solo mining. I started on bitminter but most of my mining has been on BTC Guild.

Ya never know.. I've found 2 myself through Slush, kinda made me wish I was going solo lol..

[demonmaestro]

you have to clear your browser cache.

That was it. "Palm to face"

[Phoenix1969]

Good mornin' all
Yep, 0.98 held better overnight than any other so far...good stuff for all 3 sats.
Temps still effect them a tad... they seem to enjoy 70-80 better than mid 50's for sure

[btc_uzr]

Does anyone know when shipping begins for November orders?

I'm wondering so, too.

KnC has the pleasure to be wrong whatever they do.
When they start shipping Nov15th first batch customers are not happy, if they don't second batch customers are not happy.

Guess it will be a mixture of both. Those who have ordered and paid while Nov15th was still on the website should get it close to Nov 15th.
All others who paid when it was November only, should get their miners or a tracking IDs in last days of November.

So I assume a short break between Nov15th shipping orders and November orders.
Let's see..

[dwdoc]

I have a hypothetical question. If a 3rd party wants to rent a few days of hashtime on my Jupiter and I give him remote access including my password, if he changes the password without telling me is there any way to regain access without the new password or is the Jupiter permanently hi-jacked?