Swedish ASIC miner company kncminer.com

[tzortz]

Yes, but I know a few guys got 36 boards from the first frank-jup batch and now don't have anything to lose by making them working.

[edgar]

My October Jup is dying  - every now & then it stops hashing and says pool URL invalid in PuTTy.

a few reboots/restarts/curse words later and it usually gets back down the shaft

but its happening more often and requiring more effing about to get it back hashing.

in fairness it could do with a scrub - but that can wait.

how about them refunds?

[Biffa]

My October Jup is dying  - every now & then it stops hashing and says pool URL invalid in PuTTy.

a few reboots/restarts/curse words later and it usually gets back down the shaft

but its happening more often and requiring more effing about to get it back hashing.

in fairness it could do with a scrub - but that can wait.

how about them refunds?

Refunds? We aint got no steenkin refunds! 

[edgar]

i think this is the 3rd time ive been sent this one..


 May 22 13:49

Hi,

We apologize for making you wait for the refund to be processed.
The refunds are being processed as quickly as possible and we hope to have them all processed shortly.


Best regards
Med vänlig hälsning

Natalie Forslund

[Biffa]

i think this is the 3rd time ive been sent this one..


 May 22 13:49

Hi,

We apologize for making you wait for the refund to be processed.
The refunds are being processed as quickly as possible and we hope to have them all processed shortly.


Best regards
Med vänlig hälsning

Natalie Forslund

How does the experience compare to Cointerra? 

[opentoe]

Dead die?

This is an October Jupiter that's been running from 24/7. Noticed I have a dead die. I already increased the SPI voltage all the way up to 3.3V and it wouldn't kick it on. Then I slowly increased the individual die voltage to the MAX, which is +.1465. Didn't awake up the die either. Is there anything else that can be done to kick this die on?  I would really thought that the rig would last a lot longer then 8 months.

Try turning the overclocking off?

How do you turn overclocking off? Give the module no air and suffocate it?

It is not the die, it is your VRM not starting up.

Try to reboot a few million times and if still does not start up, you will need to change the VRM module.

There is some way also to wake it up soldering bypass resistors, but then will be no controllable from your GUI anymore.

Oh hey, that sounds like fun! Everyone should break out the soldering gun rather than RMA.

Or rather, they should just live with the defect because trying to fix it isn't cost effective... at all.

Wake up people! Anything that doesn't gain you at least 1 THs these days isn't worth you worrying about. Things have changed drastically over the past few months. Worrying about 160GHs is a waste of your time and effort.

It is not a waste of time, it is expected to work regardless how much hashing it can do.

[opentoe]

My October Jup is dying  - every now & then it stops hashing and says pool URL invalid in PuTTy.

a few reboots/restarts/curse words later and it usually gets back down the shaft

but its happening more often and requiring more effing about to get it back hashing.

in fairness it could do with a scrub - but that can wait.

how about them refunds?

Maybe their hardware is really not as good as everyone said it was. Their products are only around 8 months old.

[crashoveride54902]

My October Jup is dying  - every now & then it stops hashing and says pool URL invalid in PuTTy.

a few reboots/restarts/curse words later and it usually gets back down the shaft

but its happening more often and requiring more effing about to get it back hashing.

in fairness it could do with a scrub - but that can wait.

how about them refunds?

Maybe their hardware is really not as good as everyone said it was. Their products are only around 8 months old.

well mine has been great...running oc'd to the sky and most i've notice was dark spots underneath so i put some heatsinks down there and hopefully they will last just bought another oct jup...thou it does whine at high oc still a trooper...and also a nov jup that is oc'd almost all the way to pad's max mhz cept for 1 mod...think the vrm isn't liking it...i guess it is all luck about what unit ya got no asic company is perfect and remember they didn't have time to stress test these things...but still doesn't make up for the past dealings they have done to their customers...one true statement is all asic companies are greedy fucks n will never care about their customers and if they say they do they are lieing to get you to buy more asics

[faetos]

How much are those Oct and Nov jups going for now?

[xstr8guy]

How much are those Oct and Nov jups going for now?

$1000-1500 on eBay the past few days. Modules sell for ~$200 each.

[tzortz]

My October Jup is dying  - every now & then it stops hashing and says pool URL invalid in PuTTy.

a few reboots/restarts/curse words later and it usually gets back down the shaft

but its happening more often and requiring more effing about to get it back hashing.

in fairness it could do with a scrub - but that can wait.

how about them refunds?

Maybe their hardware is really not as good as everyone said it was. Their products are only around 8 months old.

well mine has been great...running oc'd to the sky and most i've notice was dark spots underneath so i put some heatsinks down there and hopefully they will last just bought another oct jup...thou it does whine at high oc still a trooper...and also a nov jup that is oc'd almost all the way to pad's max mhz cept for 1 mod...think the vrm isn't liking it...i guess it is all luck about what unit ya got no asic company is perfect and remember they didn't have time to stress test these things...but still doesn't make up for the past dealings they have done to their customers...one true statement is all asic companies are greedy fucks n will never care about their customers and if they say they do they are lieing to get you to buy more asics

Do you have any pics of how you have done it with the heatsinks?

[SgtMoth]

Ive noticed the discoloration in the boards too, but they were on the couple that were running at 100+

[crashoveride54902]

My October Jup is dying  - every now & then it stops hashing and says pool URL invalid in PuTTy.

a few reboots/restarts/curse words later and it usually gets back down the shaft

but its happening more often and requiring more effing about to get it back hashing.

in fairness it could do with a scrub - but that can wait.

how about them refunds?

Maybe their hardware is really not as good as everyone said it was. Their products are only around 8 months old.

well mine has been great...running oc'd to the sky and most i've notice was dark spots underneath so i put some heatsinks down there and hopefully they will last just bought another oct jup...thou it does whine at high oc still a trooper...and also a nov jup that is oc'd almost all the way to pad's max mhz cept for 1 mod...think the vrm isn't liking it...i guess it is all luck about what unit ya got no asic company is perfect and remember they didn't have time to stress test these things...but still doesn't make up for the past dealings they have done to their customers...one true statement is all asic companies are greedy fucks n will never care about their customers and if they say they do they are lieing to get you to buy more asics

Do you have any pics of how you have done it with the heatsinks?

buy something like http://www.ebay.com/itm/151291978376?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

they have sticky tape on them..just put them on the bottom where the vrms are...idk if they'll fit back into the case that way cause i don't use a case anymore...dropped my temps just taking them out lol

[edgar]

i think this is the 3rd time ive been sent this one..


 May 22 13:49

Hi,

We apologize for making you wait for the refund to be processed.
The refunds are being processed as quickly as possible and we hope to have them all processed shortly.


Best regards
Med vänlig hälsning

Natalie Forslund

How does the experience compare to Cointerra? 

pretty similar - both begin with big promises and a webwide marketing campaign

though KnC had the upper hand with their in house fan girl/cheerwhore who mysteriously and ominously went silent.

Both companies give off the impression they are doing the best they can but that seems impossible in reality as its just an outward impression, not based in fact.

if i was a rich man i think i would be ready to go legal with them both now, but as im sure they are both aware, the majority of their investduhs are actually just regular guys with no real power behind them.

which leaves us with little alternative but to wait wait wait, and occasionally send emails that are either ignored (CT) or replied to with generic cut n paste answers that mean very little (refund in a few days, a month ago) (KnC)

if was the incredible hulk, i would have smashed both of their factories to pieces this week

what would really rub salt in the wound would be of they combined forces (KnCT.Gox)

i dont consider myself greedy, but i want my money back qand i wanted it back pretty much the day i asked for it - not 1-3 months later , maybe....


but then this will probably be deleted as well so perhaps i should send all the other scammers money as well....

fkn zeusminer anyone??

or that industrial plug monstrsity....

notice how their blatant thievery posts dont get deleted...

collude much??

[Zelek Uther]

My October Jup is dying  - every now & then it stops hashing and says pool URL invalid in PuTTy.

a few reboots/restarts/curse words later and it usually gets back down the shaft

but its happening more often and requiring more effing about to get it back hashing.

in fairness it could do with a scrub - but that can wait.

This makes me nervous, I have an October Jupiter too. Is yours OC'd or otherwise modded?

[edgar]

My October Jup is dying  - every now & then it stops hashing and says pool URL invalid in PuTTy.

a few reboots/restarts/curse words later and it usually gets back down the shaft

but its happening more often and requiring more effing about to get it back hashing.

in fairness it could do with a scrub - but that can wait.

This makes me nervous, I have an October Jupiter too. Is yours OC'd or otherwise modded?

Nope - its as standard.

i have OC'd it in the past but now its more likely to cause it to freak out (URL invalid bullshit) so i just let it run as is.

The November rig has none of these issues, and both OCT & NOV are more stable than the newer S2s which freak out almost every day.

[helmax]

i think this is the 3rd time ive been sent this one..


 May 22 13:49

Hi,

We apologize for making you wait for the refund to be processed.
The refunds are being processed as quickly as possible and we hope to have them all processed shortly.


Best regards
Med vänlig hälsning

Natalie Forslund

same here

is always same answer

[AFox]

Dead die?

This is an October Jupiter that's been running from 24/7. Noticed I have a dead die. I already increased the SPI voltage all the way up to 3.3V and it wouldn't kick it on. Then I slowly increased the individual die voltage to the MAX, which is +.1465. Didn't awake up the die either. Is there anything else that can be done to kick this die on?  I would really thought that the rig would last a lot longer then 8 months.

My October Jup is dying  - every now & then it stops hashing and says pool URL invalid in PuTTy.

a few reboots/restarts/curse words later and it usually gets back down the shaft

but its happening more often and requiring more effing about to get it back hashing.

in fairness it could do with a scrub - but that can wait.

how about them refunds?

Did you upgrade to Firmware 1.01 ?
Maybe Firmware 1.01 was made to break Octorber/November miners.

[The Avenger]

Did you upgrade to Firmware 1.01 ?
Maybe Firmware 1.01 was made to break Octorber/November miners.

lol, I wouldn't put it past knc.

So only another few day until June and then we'll see how KNC start fucking their remaining morons customers. They've had so much time to plan this, you can assume they have some dastardly shit planned to screw their "loyal morons customers"

Order some of this to prepare  

[raskul]

Did you upgrade to Firmware 1.01 ?
Maybe Firmware 1.01 was made to break Octorber/November miners.

lol, I wouldn't put it past knc.

So only another few day until June and then we'll see how KNC start fucking their remaining morons customers. They've had so much time to plan this, you can assume they have some dastardly shit planned to screw y'all

Order some of this to prepare  

advisory: you may need more than 1.