feeleep
Legendary
Offline
Activity: 1197
Merit: 1000
|
|
December 08, 2013, 08:39:34 PM |
|
Hi, As promised I opened 2 new LP ports on http://yac.coinmine.pl pool to handle the load: 8088 - not recommended - heavily used 8080 - not recommended - heavily used 8881 - recommended - new 8882 - recommended - new Stratum Port: 9088 - recommended feeleep
|
|
|
|
sairon
Sr. Member
Offline
Activity: 406
Merit: 250
One does not simply mine Bitcoins
|
|
December 08, 2013, 08:50:05 PM Last edit: December 08, 2013, 09:00:37 PM by sairon |
|
Hi, As promised I opened 2 new LP ports on http://yac.coinmine.pl pool to handle the load: 8088 - not recommended - heavily used 8080 - not recommended - heavily used 8881 - recommended - new 8882 - recommended - new Stratum Port: 9088 - recommended feeleep umm... are you sure you're not just running into the default "socket max conn" limit? the default in linux is set to 128, which limits the number of incoming connections per one socket (one pool port) to 128, which is absurdly low. you can check this with cat /proc/sys/net/core/somaxconn
or, if this is not the case, you must be getting some errors in the kernel log (dmesg) - if so, what are they? it's also possible you've reached max number of file handles per process (can be increased, too).
|
GPG key ID: 5E4F108A || BTC: 1hoardyponb9AMWhyA28DZb5n5g2bRY8v
|
|
|
feeleep
Legendary
Offline
Activity: 1197
Merit: 1000
|
|
December 08, 2013, 09:05:02 PM |
|
Hi, As promised I opened 2 new LP ports on http://yac.coinmine.pl pool to handle the load: 8088 - not recommended - heavily used 8080 - not recommended - heavily used 8881 - recommended - new 8882 - recommended - new Stratum Port: 9088 - recommended feeleep umm... are you sure you're not just running into the default "socket max conn" limit? the default in linux is set to 128, which limits the number of incoming connections per one socket (one pool port) to 128, which is absurdly low. you can check this with cat /proc/sys/net/core/somaxconn
or, if this is not the case, you must be getting some errors in the kernel log (dmesg) - if so, what are they? it's also possible you've reached max number of file handles per process (can be increased, too). it is a problem with pushpool itself as it somehow keeps connections established instead of closing it (and yes - I am using block notify scripts ). After few days it is so overloaded (EDIT: sometimes there is 200000 established connections to yac port!) that there are more and more rejects - the only solution is to restart pushpool daemon. There is no such problems with stratum server so thats why this is important (no only for me but also for miners)
|
|
|
|
sairon
Sr. Member
Offline
Activity: 406
Merit: 250
One does not simply mine Bitcoins
|
|
December 08, 2013, 09:51:10 PM |
|
it is a problem with pushpool itself as it somehow keeps connections established instead of closing it (and yes - I am using block notify scripts ). After few days it is so overloaded (EDIT: sometimes there is 200000 established connections to yac port!) that there are more and more rejects - the only solution is to restart pushpool daemon. There is no such problems with stratum server so thats why this is important (no only for me but also for miners) IMHO that should be fairly easy to fix. I can take a look after wrapping up the YAC client. BTW, already achieved massive speedup on startup - need more donations! YAC price will surely spike after we release it, haha! To the Moon! ┗(°0°)┛
|
GPG key ID: 5E4F108A || BTC: 1hoardyponb9AMWhyA28DZb5n5g2bRY8v
|
|
|
ivanlabrie
|
|
December 09, 2013, 01:11:02 AM |
|
it is a problem with pushpool itself as it somehow keeps connections established instead of closing it (and yes - I am using block notify scripts ). After few days it is so overloaded (EDIT: sometimes there is 200000 established connections to yac port!) that there are more and more rejects - the only solution is to restart pushpool daemon. There is no such problems with stratum server so thats why this is important (no only for me but also for miners) IMHO that should be fairly easy to fix. I can take a look after wrapping up the YAC client. BTW, already achieved massive speedup on startup - need more donations! YAC price will surely spike after we release it, haha! To the Moon! ┗(°0°)┛ Yac price is recovering nicely...usd value has increased afaik. Now I need to get a proper wallet, mine isn't updating the blockchain after a certain point
|
|
|
|
sairon
Sr. Member
Offline
Activity: 406
Merit: 250
One does not simply mine Bitcoins
|
|
December 09, 2013, 01:22:13 AM |
|
it is a problem with pushpool itself as it somehow keeps connections established instead of closing it (and yes - I am using block notify scripts ). After few days it is so overloaded (EDIT: sometimes there is 200000 established connections to yac port!) that there are more and more rejects - the only solution is to restart pushpool daemon. There is no such problems with stratum server so thats why this is important (no only for me but also for miners) IMHO that should be fairly easy to fix. I can take a look after wrapping up the YAC client. BTW, already achieved massive speedup on startup - need more donations! YAC price will surely spike after we release it, haha! To the Moon! ┗(°0°)┛ Yac price is recovering nicely...usd value has increased afaik. Now I need to get a proper wallet, mine isn't updating the blockchain after a certain point We have a working prototype of a new wallet ready. Not sure if it's bug-free, though. However, works for me so far. You can get the latest windows binaries here: https://www.dropbox.com/s/pwa2lymjl6igh6q/yacoin-cc-latest.zipNOTE: you NEED to move/rename (backup) everything except wallet.dat and peers.dat in the yacoin data directory and then run yacoin with -loadblock=C:\blk0001.dat (assuming you put the blk0001.dat file in C:\). This is needed because we had to change the way blocks are indexed and now the wallet starts in LESS THAN 30 SECONDS (down from more than 30 minutes). However, this initial load will take somewhere around 2 hours (still faster than downloading it through the p2p network). If you don't mind redownloading all the blocks, you can just remove the unneeded files and start yacoin normally (less hassle, but takes more time).
|
GPG key ID: 5E4F108A || BTC: 1hoardyponb9AMWhyA28DZb5n5g2bRY8v
|
|
|
Digicoiner
Sr. Member
Offline
Activity: 310
Merit: 250
In Crypto I trust.
|
|
December 09, 2013, 02:45:35 AM |
|
I downloaded the new client and ran it using the switch but yacoin still hasn't opened after 15 minutes.
|
|
|
|
ivanlabrie
|
|
December 09, 2013, 03:11:14 AM Last edit: December 09, 2013, 03:28:43 AM by ivanlabrie |
|
Thanks Sairon! I'll try it out now... EDIT: wow! 30 sec indeed...downloading blocks now. Thanks man!
|
|
|
|
sairon
Sr. Member
Offline
Activity: 406
Merit: 250
One does not simply mine Bitcoins
|
|
December 09, 2013, 07:42:28 AM |
|
I downloaded the new client and ran it using the switch but yacoin still hasn't opened after 15 minutes. Well, it should take a long time at first, read the note carefully. Thanks Sairon! I'll try it out now... EDIT: wow! 30 sec indeed...downloading blocks now. Thanks man! Glad it also works for you. Tips for me and my friend who helped me write this appreciated!
|
GPG key ID: 5E4F108A || BTC: 1hoardyponb9AMWhyA28DZb5n5g2bRY8v
|
|
|
Digicoiner
Sr. Member
Offline
Activity: 310
Merit: 250
In Crypto I trust.
|
|
December 09, 2013, 07:43:47 AM |
|
after the client came up I closed it and opened it again. This time it opened quickly and some coins went to stake properly. Previously I'd had an orphan stake. This looks good.
|
|
|
|
sairon
Sr. Member
Offline
Activity: 406
Merit: 250
One does not simply mine Bitcoins
|
|
December 09, 2013, 07:44:50 AM |
|
after the client came up I closed it and opened it again. This time it opened quickly and some coins went to stake properly. Previously I'd had an orphan stake. This looks good.
Nice, thanks for the feedback!
|
GPG key ID: 5E4F108A || BTC: 1hoardyponb9AMWhyA28DZb5n5g2bRY8v
|
|
|
procrypto
Full Member
Offline
Activity: 224
Merit: 100
Shitcoin Maximalist
|
|
December 09, 2013, 10:43:43 PM |
|
This was posted in the other thread, but figured it might have been missed. Certainly sounds like something we should be in the running for! Hello there, Reddit ALTcointip bot has just announced its 2nd round of signups for a list of supported cryptocurrencies. Please see the announcement for details. Thanks! -- vindimy
|
|
|
|
aso118
Legendary
Offline
Activity: 1918
Merit: 1012
★Nitrogensports.eu★
|
|
December 09, 2013, 11:45:56 PM |
|
This is great stuff! I'll have to download and send a donation when I get home. This is going to save so much time!
|
|
|
|
Thirtybird
|
|
December 10, 2013, 05:09:54 AM Last edit: May 09, 2014, 11:58:06 PM by Thirtybird |
|
CPU Miner supporting scrypt-chacha on stratumI was able to use the stratum version of CPU miner from pooler, and found the optimizations in the scrypt-jane library that mikaelh made, and I fixed the bug that prevented shares from being found and was able to compile them all into a series of x64 binaries for Windows. These binaries should be as fast as the ones that you've been using, and also support stratum. I kept the "scrypt-jane" command line option - apparently changing it to "yacoin" just confused people (even though it's, well, wrong). Please, post any feedback or any problems. PM me as an option. Latest release will always be here - https://mega.co.nz/#!mwZTnTJD!M6V3Vnmj2Kxz1fhDP8K2LUFXjrtjM-OIcAoJS0S5afwSource is available as well: http://github.com/Thirtybird/cpuminer
|
|
|
|
qiwoman
|
|
December 10, 2013, 05:24:58 AM |
|
I saw yacoin got a healthy upturn but because I can't mine yet are there any nice sites or faucets I can earn my first yacoin? I am going to buy some also on crypsy tomorrow too but wanted to earn my first yacoin.
|
|
|
|
feeleep
Legendary
Offline
Activity: 1197
Merit: 1000
|
|
December 10, 2013, 05:41:17 AM |
|
Cracked it!!! I was able to use the stratum version of CPU miner from pooler, and found the optimizations in the scrypt-jane library that mikaelh made, and I fixed the bug that prevented shares from being found and was able to compile them all into a series of x64 binaries for Windows. These binaries should be as fast as the ones that you've been using, and also support stratum. I kept the "scrypt-jane" command line option - apparently changing it to "yacoin" just confused people (even though it's, well, wrong). Please, post any feedback or any problems. PM me as an option - I've got some free time tonight and tomorrow morning (EST) to work on this. minerd-yacoin_stratum_x64.zip - https://mega.co.nz/#!mwZTnTJD!M6V3Vnmj2Kxz1fhDP8K2LUFXjrtjM-OIcAoJS0S5afw Hi It works perfect! So here is the message: Please use Thirtybird's cpuminer to mine on http://yac.coinmine.pl pool to get 5% less stalesminerd-avx -a scrypt-jane -q -o stratum+tcp://yac.coinmine.pl:9088 -O worker:worker_pass PS. I will send some donation later feeleep
|
|
|
|
|
sairon
Sr. Member
Offline
Activity: 406
Merit: 250
One does not simply mine Bitcoins
|
|
December 12, 2013, 08:39:49 AM |
|
Updated the logo on my block explorer and also on yacoin wikipedia page. https://en.wikipedia.org/wiki/YacoinAlso, windows binaries available with the new logo https://www.dropbox.com/s/pwa2lymjl6igh6q/yacoin-cc-latest.zipSites that need to change the logo: yacoinwiki.tk yacoin.org At least let's be consistent. *grumble* I still like the old logo more.
|
GPG key ID: 5E4F108A || BTC: 1hoardyponb9AMWhyA28DZb5n5g2bRY8v
|
|
|
procrypto
Full Member
Offline
Activity: 224
Merit: 100
Shitcoin Maximalist
|
|
December 12, 2013, 10:42:35 AM |
|
Nice.. Logo looks a bit low res. Is that the best quality version we have of it?
|
|
|
|
sairon
Sr. Member
Offline
Activity: 406
Merit: 250
One does not simply mine Bitcoins
|
|
December 12, 2013, 10:45:06 AM |
|
Nice.. Logo looks a bit low res. Is that the best quality version we have of it? I'm sure someone has an SVG version of it. I just uploaded the biggest PNG I found.
|
GPG key ID: 5E4F108A || BTC: 1hoardyponb9AMWhyA28DZb5n5g2bRY8v
|
|
|
|