chinh.daongoc
Jr. Member
Offline
Activity: 64
Merit: 1
|
|
December 22, 2020, 05:38:38 PM |
|
Does phoenix miner have something like "hashrate watchdog"?
I want to execute reboot.bat when hashrate of any GPU falls below 20MH/s
Thanks
|
|
|
|
abrgeza
Jr. Member
Offline
Activity: 117
Merit: 2
|
|
December 22, 2020, 06:12:41 PM |
|
Rig with 5 rx 5700 xt with settings vram clock speed 1800 to 1810, core 1300 to 1350 MHz and voltage 725 to 800 mv , win 10, amd driver ver 20.4.2. Test it at f2pool, ethermine and nicehase. With teamredminer had no problem at all, no problem at all for 5 days continuously. With phoenix miner 5.4c and 5.3b I had the same problem, when the phoenix was starting after a while (from 1 or 2 min to few hours) 1 or 2 gpus they showed 0 mh while the phoenix continued mining with the other gpus without any message and the volt from the gpu that shows 0 Mh drops to 20 watt at the software and about –100 from the wall. Any idea why it does this and how I can fix it?
yes I have an idea how you can fix it - stick with your teamredminer - continuously. The thing is that with the same settings and the same watts from the wall, the phoenix has 55.5 mh on each card and the teamred has 54 to 54.3. I have seen that what the miners report in software is also reported in the pools. 1 to 1.5 mh per cart per day for 5 gpu may not say much, but over time it is a significant difference. So if I manage to stabilize phoenix it would be good. Of course I will prefer stability from the few mh above. So anyone some idea? Don't use cvddc, cclock and mvddc. Set it to 0 for each card and use only mclock and powlim. If you use msi ab use it only for fan control. -cclock 0,0,0,0,0 -cvddc 0,0,0,0,0 -mclock 1800,1800,1800,1800,1800 -mvddc 0,0,0,0,0 -powlim -40,-40,-40,-40,-40 (some gpu can work with -45 or -50 but some gpu can't work even wit -40)
|
|
|
|
dubignyp
Newbie
Offline
Activity: 260
Merit: 0
|
|
December 22, 2020, 06:13:01 PM Last edit: December 22, 2020, 07:34:40 PM by dubignyp |
|
@al3rbee and @AL4HA error. 1080 Ti = 32 Mh/h
|
|
|
|
wizwiz316
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 22, 2020, 08:39:12 PM |
|
Hi newbie here,
I have just tried to run the PhenoixMiner and got this error can anyone help me fix it?
Phoenix Miner 5.4c Windows/msvc - Release build -----------------------------------------------
Waiting 15 s for previous instance to close CUDA version: 11.0, CUDA runtime: 8.0 No OpenCL platforms found Available GPUs for mining: GPU1: GeForce GTX 1050 Ti (pcie 1), CUDA cap. 6.1, 4 GB VRAM, 6 CUs Nvidia driver version: 460.89 Eth: Loading pools from epools.txt Eth: the pool list contains 3 pools (0 from command-line) Eth: primary pool: eu1.ethermine.org:4444 Starting GPU mining Eth: Connecting to ethash pool eu1.ethermine.org:4444 (proto: EthProxy) GPU1: 40C 0% 24W GPUs power: 23.5 W Eth: Connected to ethash pool eu1.ethermine.org:4444 (172.65.207.xxx) Eth: New job #18430768 from eu1.ethermine.org:4444; diff: 4000MH GPU1: Starting up... (0) GPU1: Generating ethash light cache for epoch #383 Listening for CDM remote manager at port 3333 in read-only mode Eth: New job #d715a735 from eu1.ethermine.org:4444; diff: 4000MH Light cache generated in 4.4 s (14.6 MB/s) GPU1: Allocating DAG (4.01) GB; good for epoch up to #385 CUDA error in CudaProgram.cu:388 : out of memory (2) GPU1: CUDA memory: 4.00 GB total, 3.30 GB free GPU1 initMiner error: out of memory Fatal error detected. Restarting. Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00 Eth: New job #3f576799 from eu1.ethermine.org:4444; diff: 4000MH Eth: New job #b691a7b3 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #13ca4a33 from eu1.ethermine.org:4444; diff: 4000MH Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
Thanks
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
|
December 22, 2020, 08:47:31 PM |
|
Does phoenix miner have something like "hashrate watchdog"?
I want to execute reboot.bat when hashrate of any GPU falls below 20MH/s
Thanks
-minrigspeed option
|
|
|
|
Wisbrown
Newbie
Offline
Activity: 81
Merit: 0
|
|
December 22, 2020, 08:54:59 PM |
|
What is the level of its security and its network.
|
|
|
|
sirgod
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 22, 2020, 10:44:12 PM |
|
Hello guys, i have 5 gtx 1080ti and im getting 210MH/s (42MH/s each and consuming 160w each) with power75% +50 +650 clocksettings. im just using the miner and the PILL, and basically 0 configs Any hints to pump these rookie numbers ?
|
|
|
|
lionkos
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 22, 2020, 11:06:14 PM |
|
Rig with 5 rx 5700 xt with settings vram clock speed 1800 to 1810, core 1300 to 1350 MHz and voltage 725 to 800 mv , win 10, amd driver ver 20.4.2. Test it at f2pool, ethermine and nicehase. With teamredminer had no problem at all, no problem at all for 5 days continuously. With phoenix miner 5.4c and 5.3b I had the same problem, when the phoenix was starting after a while (from 1 or 2 min to few hours) 1 or 2 gpus they showed 0 mh while the phoenix continued mining with the other gpus without any message and the volt from the gpu that shows 0 Mh drops to 20 watt at the software and about –100 from the wall. Any idea why it does this and how I can fix it?
yes I have an idea how you can fix it - stick with your teamredminer - continuously. The thing is that with the same settings and the same watts from the wall, the phoenix has 55.5 mh on each card and the teamred has 54 to 54.3. I have seen that what the miners report in software is also reported in the pools. 1 to 1.5 mh per cart per day for 5 gpu may not say much, but over time it is a significant difference. So if I manage to stabilize phoenix it would be good. Of course I will prefer stability from the few mh above. So anyone some idea? Don't use cvddc, cclock and mvddc. Set it to 0 for each card and use only mclock and powlim. If you use msi ab use it only for fan control. -cclock 0,0,0,0,0 -cvddc 0,0,0,0,0 -mclock 1800,1800,1800,1800,1800 -mvddc 0,0,0,0,0 -powlim -40,-40,-40,-40,-40 (some gpu can work with -45 or -50 but some gpu can't work even wit -40) Thanks for the reply. I do not use any of them in the bat file. For gpu control I use only AMD software. In the bat file I have only the main points such as pool, wallet and worker. The power limit of all gpus is at 0%. Should I add clock, cvddc and mvddc at bat file with 0?
|
|
|
|
Deafran
Jr. Member
Offline
Activity: 49
Merit: 4
|
|
December 23, 2020, 03:55:55 AM Last edit: December 23, 2020, 04:10:27 AM by Deafran |
|
Do you guys still mining with rx470? Planning to rebuild this rig. I want to know if still worth mining with rx470.
If someone still mining with this cards can you share your power consumption. Thanks.
using ethOS, RX 470 4GB ram amount: 3.7G used: 3.5G free: 219M cpu usage / temp / load: 95.2% / 50C / 2.54 2.14 1.17 53°C Fan: 2.7 Hash: 22.03 03 Ellesmere RX 470 113-WE353FU-M73 Samsung 57°C Fan: 2.8 Hash: 22.01 05 Ellesmere RX 470 113-WE353FU-M73 Samsung 57°C Fan: 2.8 Hash: 22.02 09 Ellesmere RX 470 113-WE353FU-M73 Samsung 57°C Fan: 2.8 Hash: 22.03 0a Ellesmere RX 470 113-WE353FU-M73 Samsung 48°C Fan: 2.7 Hash: 22.03 0b Ellesmere RX 470 113-WE353FU-M73 Samsung 57°C Fan: 2.8 Hash: 22.03 0c Ellesmere RX 470 113-WE353FU-M73 Samsung 50°C Fan: 2.7 Hash: 22.03 0d Ellesmere RX 470 113-WE353FU-M73 Samsung 54°C Fan: 2.8 Hash: 22.03 0e Ellesmere RX 470 113-WE353FU-M73 Samsung 176.2 hash: miner active GPU1: 52C 80% 84W, GPU2: 56C 80% 88W, GPU3: 57C 80% 85W, GPU4: 57C 80% 84W, GPU5: 48C 80% 84W, GPU6: 57C 80% 85W, GPU7: 50C 80% 85W, GPU8: 53C 80% 81W GPUs power: 676.0 W Eth: New job #e652962b from eth-asia1.nanopool.org:9999; diff: 10000MH Eth: New job #10c86f7b from eth-asia1.nanopool.org:9999; diff: 10000MH Eth speed: 176.210 MH/s, shares: 5/0/0, time: 0:06 GPUs: 1: 22.030 MH/s (0) 2: 22.015 MH/s (0) 3: 22.020 MH/s (0) 4: 22.029 MH/s (1) 5: 22.035 MH/s (1) 6: 22.029 MH/s (0) 7: 22.033 MH/s (1) 8: 22.019 MH/s (2) Hi newbie here,
I have just tried to run the PhenoixMiner and got this error can anyone help me fix it?
Phoenix Miner 5.4c Windows/msvc - Release build -----------------------------------------------
Waiting 15 s for previous instance to close CUDA version: 11.0, CUDA runtime: 8.0 No OpenCL platforms found Available GPUs for mining: GPU1: GeForce GTX 1050 Ti (pcie 1), CUDA cap. 6.1, 4 GB VRAM, 6 CUs Nvidia driver version: 460.89 Eth: Loading pools from epools.txt Eth: the pool list contains 3 pools (0 from command-line) Eth: primary pool: eu1.ethermine.org:4444 Starting GPU mining Eth: Connecting to ethash pool eu1.ethermine.org:4444 (proto: EthProxy) GPU1: 40C 0% 24W GPUs power: 23.5 W Eth: Connected to ethash pool eu1.ethermine.org:4444 (172.65.207.xxx) Eth: New job #18430768 from eu1.ethermine.org:4444; diff: 4000MH GPU1: Starting up... (0) GPU1: Generating ethash light cache for epoch #383 Listening for CDM remote manager at port 3333 in read-only mode Eth: New job #d715a735 from eu1.ethermine.org:4444; diff: 4000MH Light cache generated in 4.4 s (14.6 MB/s) GPU1: Allocating DAG (4.01) GB; good for epoch up to #385 CUDA error in CudaProgram.cu:388 : out of memory (2) GPU1: CUDA memory: 4.00 GB total, 3.30 GB free GPU1 initMiner error: out of memory Fatal error detected. Restarting. Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00 Eth: New job #3f576799 from eu1.ethermine.org:4444; diff: 4000MH Eth: New job #b691a7b3 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #13ca4a33 from eu1.ethermine.org:4444; diff: 4000MH Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
Thanks
try this : -dagrestart 2 -gser 2
|
|
|
|
abrgeza
Jr. Member
Offline
Activity: 117
Merit: 2
|
|
December 23, 2020, 05:50:08 AM |
|
Rig with 5 rx 5700 xt with settings vram clock speed 1800 to 1810, core 1300 to 1350 MHz and voltage 725 to 800 mv , win 10, amd driver ver 20.4.2. Test it at f2pool, ethermine and nicehase. With teamredminer had no problem at all, no problem at all for 5 days continuously. With phoenix miner 5.4c and 5.3b I had the same problem, when the phoenix was starting after a while (from 1 or 2 min to few hours) 1 or 2 gpus they showed 0 mh while the phoenix continued mining with the other gpus without any message and the volt from the gpu that shows 0 Mh drops to 20 watt at the software and about –100 from the wall. Any idea why it does this and how I can fix it?
yes I have an idea how you can fix it - stick with your teamredminer - continuously. The thing is that with the same settings and the same watts from the wall, the phoenix has 55.5 mh on each card and the teamred has 54 to 54.3. I have seen that what the miners report in software is also reported in the pools. 1 to 1.5 mh per cart per day for 5 gpu may not say much, but over time it is a significant difference. So if I manage to stabilize phoenix it would be good. Of course I will prefer stability from the few mh above. So anyone some idea? Don't use cvddc, cclock and mvddc. Set it to 0 for each card and use only mclock and powlim. If you use msi ab use it only for fan control. -cclock 0,0,0,0,0 -cvddc 0,0,0,0,0 -mclock 1800,1800,1800,1800,1800 -mvddc 0,0,0,0,0 -powlim -40,-40,-40,-40,-40 (some gpu can work with -45 or -50 but some gpu can't work even wit -40) Thanks for the reply. I do not use any of them in the bat file. For gpu control I use only AMD software. In the bat file I have only the main points such as pool, wallet and worker. The power limit of all gpus is at 0%. Should I add clock, cvddc and mvddc at bat file with 0? set all to default in amd software and add settings in bat file, maybe amd software cause problems. PM5.3b and 20.4.2 drivers should work fine. if it doesn't work use trm or lolminer.
|
|
|
|
Vladegg
Newbie
Offline
Activity: 69
Merit: 0
|
|
December 23, 2020, 06:56:32 AM |
|
Does phoenix miner have something like "hashrate watchdog"?
I want to execute reboot.bat when hashrate of any GPU falls below 20MH/s
Thanks
Try this https://bitcointalk.org/index.php?topic=2071108.0Working still.
|
|
|
|
wizwiz316
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 23, 2020, 07:46:59 AM |
|
Do you guys still mining with rx470? Planning to rebuild this rig. I want to know if still worth mining with rx470.
If someone still mining with this cards can you share your power consumption. Thanks.
using ethOS, RX 470 4GB ram amount: 3.7G used: 3.5G free: 219M cpu usage / temp / load: 95.2% / 50C / 2.54 2.14 1.17 53°C Fan: 2.7 Hash: 22.03 03 Ellesmere RX 470 113-WE353FU-M73 Samsung 57°C Fan: 2.8 Hash: 22.01 05 Ellesmere RX 470 113-WE353FU-M73 Samsung 57°C Fan: 2.8 Hash: 22.02 09 Ellesmere RX 470 113-WE353FU-M73 Samsung 57°C Fan: 2.8 Hash: 22.03 0a Ellesmere RX 470 113-WE353FU-M73 Samsung 48°C Fan: 2.7 Hash: 22.03 0b Ellesmere RX 470 113-WE353FU-M73 Samsung 57°C Fan: 2.8 Hash: 22.03 0c Ellesmere RX 470 113-WE353FU-M73 Samsung 50°C Fan: 2.7 Hash: 22.03 0d Ellesmere RX 470 113-WE353FU-M73 Samsung 54°C Fan: 2.8 Hash: 22.03 0e Ellesmere RX 470 113-WE353FU-M73 Samsung 176.2 hash: miner active GPU1: 52C 80% 84W, GPU2: 56C 80% 88W, GPU3: 57C 80% 85W, GPU4: 57C 80% 84W, GPU5: 48C 80% 84W, GPU6: 57C 80% 85W, GPU7: 50C 80% 85W, GPU8: 53C 80% 81W GPUs power: 676.0 W Eth: New job #e652962b from eth-asia1.nanopool.org:9999; diff: 10000MH Eth: New job #10c86f7b from eth-asia1.nanopool.org:9999; diff: 10000MH Eth speed: 176.210 MH/s, shares: 5/0/0, time: 0:06 GPUs: 1: 22.030 MH/s (0) 2: 22.015 MH/s (0) 3: 22.020 MH/s (0) 4: 22.029 MH/s (1) 5: 22.035 MH/s (1) 6: 22.029 MH/s (0) 7: 22.033 MH/s (1) 8: 22.019 MH/s (2) Hi newbie here,
I have just tried to run the PhenoixMiner and got this error can anyone help me fix it?
Phoenix Miner 5.4c Windows/msvc - Release build -----------------------------------------------
Waiting 15 s for previous instance to close CUDA version: 11.0, CUDA runtime: 8.0 No OpenCL platforms found Available GPUs for mining: GPU1: GeForce GTX 1050 Ti (pcie 1), CUDA cap. 6.1, 4 GB VRAM, 6 CUs Nvidia driver version: 460.89 Eth: Loading pools from epools.txt Eth: the pool list contains 3 pools (0 from command-line) Eth: primary pool: eu1.ethermine.org:4444 Starting GPU mining Eth: Connecting to ethash pool eu1.ethermine.org:4444 (proto: EthProxy) GPU1: 40C 0% 24W GPUs power: 23.5 W Eth: Connected to ethash pool eu1.ethermine.org:4444 (172.65.207.xxx) Eth: New job #18430768 from eu1.ethermine.org:4444; diff: 4000MH GPU1: Starting up... (0) GPU1: Generating ethash light cache for epoch #383 Listening for CDM remote manager at port 3333 in read-only mode Eth: New job #d715a735 from eu1.ethermine.org:4444; diff: 4000MH Light cache generated in 4.4 s (14.6 MB/s) GPU1: Allocating DAG (4.01) GB; good for epoch up to #385 CUDA error in CudaProgram.cu:388 : out of memory (2) GPU1: CUDA memory: 4.00 GB total, 3.30 GB free GPU1 initMiner error: out of memory Fatal error detected. Restarting. Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00 Eth: New job #3f576799 from eu1.ethermine.org:4444; diff: 4000MH Eth: New job #b691a7b3 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #13ca4a33 from eu1.ethermine.org:4444; diff: 4000MH Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
Thanks
try this : -dagrestart 2 -gser 2 Thank how do I run this command? sorry new to all this!
|
|
|
|
hesido
Jr. Member
Offline
Activity: 158
Merit: 5
|
|
December 23, 2020, 08:09:46 AM |
|
I really like this miner. Here's a feature suggestion; I would like to have the option of having the following ability: - Do not mine if N number of GPU's are NOT present.
short: A failed GPU/Riser can result in GPU reordering and this will almost always en up with OC settings applied to the wrong card, and could be a real show-stopper especially in mixed rigs, or even end up burning stuff up, this can be handled in two ways: - Option A: where if N number of target GPU's are not present, do not mine.
OR - Option B: Simply if you have ANY setting in config where any setting cannot be applied to a specific gpu, just error out and do not mine.
The latter even could be the default behavior, and could optionally be overridden by those adventurous miners who for some reason want to keep mining with mis-matching OC settings when one of their GPU's fail. Longer Explanation: This is not the same as "if hashrate is below certain amount, stop / restart miner" feature, and is directly related to the safety of rigs. Sometimes a pci-riser can fail or simply even lose connection (there were many times issues could be fixed by simply re-inserting a riser in slot or re-inserting the usb cables), if that happens, system usually resets and phoenix restarts in the beginning. This may not be much of a problem for homogeneous rigs where you can set every parameter the same, but this is rarely the case, as rigs are fine tuned down to gpu level mostly and OC settings can differ massively in mixed rings, where you would rarely want to apply settings to a different card. An example of how Option B could work on a 3 gpu system: When a gpu fails, the last setting won't be applied, error out, because if the one of the first gpu has failed, you'd be applying the 1200 setting to the gpu that requires 1150. The difference could be big enough to create bigger problems. When a gpu fails, just keep on working. -cvddc 1200, 1175, 1150 -disablegpusettingfailsafe #disclaimer: this is a made up option, do not use this in your config, there's no such option yet.
When a gpu fails, keep on applying OC with the default behaviour. For lazy miners who e.g. have 5 gpus and don't want to subscribe to the new failsafe setting system by writing -cvddc 1170, 1150, 1150, 1150, 1150
They can still go: -cvddc 1170, 1150 -disablegpusettingfailsafe #disclaimer: this is a made up option, do not use this in your config, there's no such option yet.
|
|
|
|
wizwiz316
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 23, 2020, 10:32:38 AM |
|
Can anyone help me with this problem please?
Phoenix Miner 5.4c Windows/msvc - Release build -----------------------------------------------
Waiting 15 s for previous instance to close CUDA version: 11.0, CUDA runtime: 8.0 No OpenCL platforms found Available GPUs for mining: GPU1: GeForce GTX 1050 Ti (pcie 1), CUDA cap. 6.1, 4 GB VRAM, 6 CUs Nvidia driver version: 460.89 Eth: Loading pools from epools.txt Eth: the pool list contains 3 pools (0 from command-line) Eth: primary pool: eu1.ethermine.org:4444 Starting GPU mining Eth: Connecting to ethash pool eu1.ethermine.org:4444 (proto: EthProxy) GPU1: 45C 0% 24W GPUs power: 23.9 W GPU tuning is only supported on dual kernels or on AMD GPUs with optimized kernels Eth: Connected to ethash pool eu1.ethermine.org:4444 (172.65.207.xxx) Eth: New job #92ca47d1 from eu1.ethermine.org:4444; diff: 4000MH GPU1: Starting up... (0) GPU1: Generating ethash light cache for epoch #383 Listening for CDM remote manager at port 3333 in read-only mode Eth: New job #7c2c836b from eu1.ethermine.org:4444; diff: 4000MH Light cache generated in 4.5 s (14.2 MB/s) GPU1: Allocating DAG (4.01) GB; good for epoch up to #385 CUDA error in CudaProgram.cu:388 : out of memory (2) GPU1: CUDA memory: 4.00 GB total, 3.30 GB free GPU1 initMiner error: out of memory Fatal error detected. Restarting. Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00 Eth: New job #78994abc from eu1.ethermine.org:4444; diff: 4000MH
|
|
|
|
cirlama
Jr. Member
Offline
Activity: 156
Merit: 1
|
|
December 23, 2020, 11:32:45 AM |
|
Hello guys, i have 5 gtx 1080ti and im getting 210MH/s (42MH/s each and consuming 160w each) with power75% +50 +650 clocksettings. im just using the miner and the PILL, and basically 0 configs Any hints to pump these rookie numbers ?
you can try using straps instead of the pill by adding it on your cmd line (but the miner has to run in admin to set the straps): -nvdo 1 -straps 2 -mi 14 (with the straps, the +xxx on mem does almost nothing, I set mine to -200 for improved stability) you can test a bit higher in core, or increase your power to 85% (but more watts...) I am getting 45 MH/s @75%power, 47.5 @85%
|
|
|
|
Cryptomining2003
Newbie
Offline
Activity: 64
Merit: 0
|
|
December 23, 2020, 12:06:12 PM |
|
I really like this miner. Here's a feature suggestion; I would like to have the option of having the following ability: - Do not mine if N number of GPU's are NOT present.
short: A failed GPU/Riser can result in GPU reordering and this will almost always en up with OC settings applied to the wrong card, and could be a real show-stopper especially in mixed rigs, or even end up burning stuff up, this can be handled in two ways: - Option A: where if N number of target GPU's are not present, do not mine.
OR - Option B: Simply if you have ANY setting in config where any setting cannot be applied to a specific gpu, just error out and do not mine.
The latter even could be the default behavior, and could optionally be overridden by those adventurous miners who for some reason want to keep mining with mis-matching OC settings when one of their GPU's fail. Longer Explanation: This is not the same as "if hashrate is below certain amount, stop / restart miner" feature, and is directly related to the safety of rigs. Sometimes a pci-riser can fail or simply even lose connection (there were many times issues could be fixed by simply re-inserting a riser in slot or re-inserting the usb cables), if that happens, system usually resets and phoenix restarts in the beginning. This may not be much of a problem for homogeneous rigs where you can set every parameter the same, but this is rarely the case, as rigs are fine tuned down to gpu level mostly and OC settings can differ massively in mixed rings, where you would rarely want to apply settings to a different card. An example of how Option B could work on a 3 gpu system: When a gpu fails, the last setting won't be applied, error out, because if the one of the first gpu has failed, you'd be applying the 1200 setting to the gpu that requires 1150. The difference could be big enough to create bigger problems. When a gpu fails, just keep on working. -cvddc 1200, 1175, 1150 -disablegpusettingfailsafe #disclaimer: this is a made up option, do not use this in your config, there's no such option yet.
When a gpu fails, keep on applying OC with the default behaviour. For lazy miners who e.g. have 5 gpus and don't want to subscribe to the new failsafe setting system by writing -cvddc 1170, 1150, 1150, 1150, 1150
They can still go: -cvddc 1170, 1150 -disablegpusettingfailsafe #disclaimer: this is a made up option, do not use this in your config, there's no such option yet.
that´s a good point. I already recognized that if you have one GPU as GPU0, it will not stay GPU0 if you add or remove a card. I added 2 cards to my rig...I printed the GPU number with a label printer to the GPU´s...but you can forget everything if you edit the number of gpu´s...you need to find out with spinning fans which one is which one and set oc manually again. if one card crashes and the rig restarts without that card...your oc settings will be totally mixed...true ! good point.....but maybe a point for the operating system not to start the miner..... but if one could add this to phoenixminer, would be great to see.
|
|
|
|
scaras
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 23, 2020, 02:48:30 PM Last edit: December 23, 2020, 02:58:32 PM by scaras |
|
https://i.ibb.co/xS1Xbyd/1.pngi get low share rates but high difficulty. this is on a rtx 3060 ti with 70% powerlimit and +1000 on memspeed in afterburner. is this good/bad and how solve this?
|
|
|
|
batsonxl
Member
Offline
Activity: 1202
Merit: 27
|
|
December 23, 2020, 05:04:35 PM |
|
albornoz albornoz albornoz dude arent you tired keep posting these scam posts???
|
|
|
|
Toughit
|
|
December 23, 2020, 07:04:56 PM |
|
Do you guys still mining with rx470? Planning to rebuild this rig. I want to know if still worth mining with rx470.
If someone still mining with this cards can you share your power consumption. Thanks.
Of course you can mine with RX 470. Mine are doing 30 MH/s. They are the Sapphire variant with Samsung 8Gb. Mind sharing your settings, Im struggling to get 20-22 on my 470 8gb cards...
|
|
|
|
hesido
Jr. Member
Offline
Activity: 158
Merit: 5
|
|
December 23, 2020, 08:37:56 PM |
|
that´s a good point. I already recognized that if you have one GPU as GPU0, it will not stay GPU0 if you add or remove a card. I added 2 cards to my rig...I printed the GPU number with a label printer to the GPU´s...but you can forget everything if you edit the number of gpu´s...you need to find out with spinning fans which one is which one and set oc manually again. if one card crashes and the rig restarts without that card...your oc settings will be totally mixed...true ! good point.....but maybe a point for the operating system not to start the miner.....
but if one could add this to phoenixminer, would be great to see.
Thanks, I just made a powershell script that counts the display adapters using devcon.exe (windows) and shuts down the system after a timeout if it can't find required number of display adapters, or runs the normal batch. It's not fool-proof or as graceful as having it on phoenix miner. Haven't yet tested the script in real-life conditions yet, and don't know what happens if the drivers are disabled instead of a gpu/riser failure. Will have to test those some time. I hope this kind of behaviour can make it into phoenix miner itself.
|
|
|
|
|