|
miner29
|
 |
February 12, 2021, 05:43:38 PM |
|
whats current hashrate for rx470 4G in epoch 394? on windows + linux
On linux im getting 28mhs... on 570-4gb in slot 0....using lolminers 1.22 13-14 on the rest in the rig. |
|
|
|
|
nbminer
Newbie
 Offline
Activity: 29
Merit: 0
|
|
February 12, 2021, 06:02:13 PM |
|
I play around with Linux on and off. But would running from a USB stick work? I guess I'm thinking in terms of Windows here, but it seems you need to have enough virtual memory space or HD space to accommodate the DAG. Not a problem within one of these like HiveOS? Just put on USB, boot and load lolminer?
Seems like dark magic you speak of.
HiveOS & Simplemining are both intended to run from USB sticks but can also be run from hard drives if you wish, I run HiveOS from an SSHD. https://hiveos.farm/https://simplemining.net/ |
|
|
|
|
Morph42
Jr. Member
Offline
Activity: 60
Merit: 2
|
|
February 12, 2021, 07:39:53 PM |
|
Linux is so much better at resource management its not even funny
Then a test to Linux I shall go. Thanks for the input. |
|
|
|
|
Morph42
Jr. Member
Offline
Activity: 60
Merit: 2
|
|
February 12, 2021, 07:40:54 PM |
|
I play around with Linux on and off. But would running from a USB stick work? I guess I'm thinking in terms of Windows here, but it seems you need to have enough virtual memory space or HD space to accommodate the DAG. Not a problem within one of these like HiveOS? Just put on USB, boot and load lolminer?
Seems like dark magic you speak of.
HiveOS & Simplemining are both intended to run from USB sticks but can also be run from hard drives if you wish, I run HiveOS from an SSHD. https://hiveos.farm/https://simplemining.net/Only downside I'm seeing to this is the monthly fees I have to pay. Thinking I might load up Ubuntu Desktop, install AMD drivers and then run lolminer. |
|
|
|
|
nbminer
Newbie
Offline
Activity: 29
Merit: 0
|
|
February 13, 2021, 08:23:39 AM |
|
Only downside I'm seeing to this is the monthly fees I have to pay.
Thinking I might load up Ubuntu Desktop, install AMD drivers and then run lolminer.
How many rigs do you have? 1 rig is always free with HiveOS. |
|
|
|
|
ivomm
Legendary
 Online
Activity: 1896
Merit: 3153
All good things to those who wait
|
|
February 13, 2021, 09:21:14 AM |
|
On SMOS both versions 1.23 and 1.24 crash on each 4GB card, no matter what value for --4g-alloc-size parameter is set. Version 1.22 works well except 560 cards, there it often goes to 0 hash and the rig freezes. Again, I tried many parameters from 3900 to 4080. Sometimes 560 starts, sometimes not. And after several hours it goes to 0.
|
|
|
|
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
February 13, 2021, 02:07:34 PM |
|
On SMOS both versions 1.23 and 1.24 crash on each 4GB card, no matter what value for --4g-alloc-size parameter is set. Version 1.22 works well except 560 cards, there it often goes to 0 hash and the rig freezes. Again, I tried many parameters from 3900 to 4080. Sometimes 560 starts, sometimes not. And after several hours it goes to 0.
Yeah, I have done some tests here and concluded the same thing, "On SMOS both versions 1.23 and 1.24 crash on each 4GB card,". |
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
February 13, 2021, 02:29:49 PM |
|
was running at 18.3MH/s on 1.22 but 1.23 only gave me 8.5mh/s. Auto settings doesn't work for this card. I had to add --4g-alloc-size 4078 parameter to get it back to 18+MH/s
Where did you see 1.23, I only see 1.22 here and on github page Use 1.24a it has some fix updates |
|
|
|
|
EthosRIG
Newbie
Offline
Activity: 29
Merit: 0
|
|
February 13, 2021, 04:45:49 PM |
|
Good result. I think the third card isn't performing as the first two because of the RAM. If lolminer is using the RAM to compensate the vRAM missing, maybe at least 16gb RAM are needed, possibly 3200mhz so they are fast. |
|
|
|
|
koppees
Newbie
Offline
Activity: 31
Merit: 0
|
|
February 13, 2021, 04:49:24 PM |
|
On SMOS both versions 1.23 and 1.24 crash on each 4GB card, no matter what value for --4g-alloc-size parameter is set. Version 1.22 works well except 560 cards, there it often goes to 0 hash and the rig freezes. Again, I tried many parameters from 3900 to 4080. Sometimes 560 starts, sometimes not. And after several hours it goes to 0.
Yeah, I have done some tests here and concluded the same thing, "On SMOS both versions 1.23 and 1.24 crash on each 4GB card,". I am experiencing the exact same issues with lolminer 1.23 and 1.24 in SMOS. |
|
|
|
|
dext-r
Newbie
Offline
Activity: 17
Merit: 0
|
|
February 13, 2021, 09:10:28 PM |
|
Good result. I think the third card isn't performing as the first two because of the RAM. If lolminer is using the RAM to compensate the vRAM missing, maybe at least 16gb RAM are needed, possibly 3200mhz so they are fast. Thanks, but this is not the memory, somthing else, here is the specs of the MoBo Expansion Slots: 2 x PCIe 3.0/2.0 x16 (Single at x16, dual at x8/x8, ) 1 x PCIe 3.0/2.0 x16 (max at x4 mode, ) - i think that is the reason why the third works on smaller hashpower 3 x PCIe 3.0/2.0 x1 |
|
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
February 13, 2021, 09:50:33 PM |
|
On SMOS both versions 1.23 and 1.24 crash on each 4GB card, no matter what value for --4g-alloc-size parameter is set. Version 1.22 works well except 560 cards, there it often goes to 0 hash and the rig freezes. Again, I tried many parameters from 3900 to 4080. Sometimes 560 starts, sometimes not. And after several hours it goes to 0.
Yeah, I have done some tests here and concluded the same thing, "On SMOS both versions 1.23 and 1.24 crash on each 4GB card,". I am experiencing the exact same issues with lolminer 1.23 and 1.24 in SMOS. 124a seems to have fixed it, hashrate seems to be the same. |
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
gathermind
Newbie
Offline
Activity: 45
Merit: 0
|
|
February 14, 2021, 06:20:23 AM |
|
Hi,
I am using lolMiner window version now. Because one display card is not stable, it sometimes halts system.
How can I know which display card is the reason leading to halt system?
Does it have any Log saved hints in lolMiner?
|
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
February 14, 2021, 07:27:26 AM |
|
Hi,
I am using lolMiner window version now. Because one display card is not stable, it sometimes halts system.
How can I know which display card is the reason leading to halt system?
Does it have any Log saved hints in lolMiner?
You have to see which cards goes to 0. Also if you make a loop in the bat file, the 2nd run will not mine with the death card... You can also put here your OC values to see if some of it is too low. |
|
|
|
|
EthosRIG
Newbie
Offline
Activity: 29
Merit: 0
|
|
February 14, 2021, 07:50:03 AM |
|
Good result. I think the third card isn't performing as the first two because of the RAM. If lolminer is using the RAM to compensate the vRAM missing, maybe at least 16gb RAM are needed, possibly 3200mhz so they are fast. Thanks, but this is not the memory, somthing else, here is the specs of the MoBo Expansion Slots: 2 x PCIe 3.0/2.0 x16 (Single at x16, dual at x8/x8, ) 1 x PCIe 3.0/2.0 x16 (max at x4 mode, ) - i think that is the reason why the third works on smaller hashpower 3 x PCIe 3.0/2.0 x1 OK, now we know everything we need to know. In order to perform almost like 8gb card we need x8 lines for each 4gb card. I do have ASRock H110 Pro BTC+ only, with only one PCI-e x16 slot. I placed a 4gb card in that socket without risers and it is giving me 28.5 mhs. All the other cards are on risers, the 8gb cards are running full speed for obvious reasons and for the remaining cards I am mining another coin... |
|
|
|
|
gathermind
Newbie
Offline
Activity: 45
Merit: 0
|
|
February 14, 2021, 08:29:53 AM |
|
Hi,
I am using lolMiner window version now. Because one display card is not stable, it sometimes halts system.
How can I know which display card is the reason leading to halt system?
Does it have any Log saved hints in lolMiner?
You have to see which cards goes to 0. Also if you make a loop in the bat file, the 2nd run will not mine with the death card... You can also put here your OC values to see if some of it is too low. I see what you mean the first suggestion. However, my window system crashs the whole system and halts, not just stops the lolminer, but the whole win10. I need to reboot win10 after I discover this halted situation. |
|
|
|
|
fapar
Sr. Member
Offline
Activity: 1414
Merit: 270
Undeads.com - P2E Runner Game
|
|
February 14, 2021, 10:17:55 AM |
|
I see what you mean the first suggestion.
However, my window system crashs the whole system and halts, not just stops the lolminer, but the whole win10.
I need to reboot win10 after I discover this halted situation.
You can add the --log on parameter to your *.bat file. The logs will be collected in the logs folder and you can study it at any time and find out which videocard has problems. |
|
|
|
gathermind
Newbie
Offline
Activity: 45
Merit: 0
|
|
February 14, 2021, 10:55:11 AM |
|
I see what you mean the first suggestion.
However, my window system crashs the whole system and halts, not just stops the lolminer, but the whole win10.
I need to reboot win10 after I discover this halted situation.
You can add the --log on parameter to your *.bat file. The logs will be collected in the logs folder and you can study it at any time and find out which videocard has problems. Thanks! I got it!  |
|
|
|
|
a1ternative
Newbie
Offline
Activity: 5
Merit: 0
|
|
February 14, 2021, 04:17:59 PM
Last edit: February 14, 2021, 07:06:50 PM by a1ternative |
|
Did You used an extra power for mobo or only standart 24pin ? |
|
|
|
|
|
