a1ternative
Newbie
 Offline
Activity: 5
Merit: 0
|
 |
February 14, 2021, 04:17:59 PM
Last edit: February 14, 2021, 07:06:50 PM by a1ternative |
|
Did You used an extra power for mobo or only standart 24pin ? |
|
|
|
|
dext-r
Newbie
Offline
Activity: 17
Merit: 0
|
|
February 14, 2021, 08:15:10 PM |
|
Did You used an extra power for mobo or only standart 24pin ? Just 24pin + 8pin EPS for CPU, but you have right, can be a problem with the pci express power |
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
February 14, 2021, 08:48:17 PM |
|
2pc xfx 470 4gb hynix on same MB 16x slot  miner screen:  today have make order for MB with three 16x slot  RX470 4G cards on Asus Z170 PRO GAMING directly on PCI Express 16x slot 1st rig 3x Sapphire RX470 Nitro 4GB Hynix   2nd rig 3x XFX RX470 Black Edition 4GB Hynix   Did You used an extra power for mobo or only standart 24pin ? Just 24pin + 8pin EPS for CPU, but you have right, can be a problem with the pci express power Normally is 75W from the socket Pcie |
|
|
|
|
sweee18
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 14, 2021, 09:37:12 PM |
|
My aorus b450m has this second slot:
1 x PCI Express x16 slot, running at x4 (PCIEX4)
and i am only getting 15.9mhs is this the max i can get or do i need to change something?
|
|
|
|
|
|
Dowper_
|
|
February 14, 2021, 10:11:21 PM |
|
|
|
|
|
JonnyJalapeno
Newbie
Offline
Activity: 11
Merit: 2
|
|
February 14, 2021, 10:14:24 PM |
|
What key i need to press to show statistics on demand?
The statistic are show depending on your parameteres... you can modify them to be show in less or more time... by default are: --longstats arg (=150) Long statistics interval --shortstats arg (=30) Short statistics interval Where do i put this? Sorry but readme is complete rubbish. |
|
|
|
|
catfish78
Newbie
Offline
Activity: 142
Merit: 0
|
|
February 15, 2021, 11:46:19 AM |
|
Nice work! Do You use: Gen1,2,3 or auto? Above 4G decoding: disabled or enabled? |
|
|
|
|
dext-r
Newbie
Offline
Activity: 17
Merit: 0
|
|
February 15, 2021, 01:01:34 PM |
|
Nice work! Do You use: Gen1,2,3 or auto? Above 4G decoding: disabled or enabled? Thank you, Gen3 + enabled 4g decoding |
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
February 15, 2021, 03:25:35 PM |
|
RX470 4G cards on Asus Z170 PRO GAMING directly on PCI Express 16x slot 1st rig 3x Sapphire RX470 Nitro 4GB Hynix 2nd rig 3x XFX RX470 Black Edition 4GB Hynix Nice work! Do You use: Gen1,2,3 or auto? Above 4G decoding: disabled or enabled? Thank you, Gen3 + enabled 4g decoding Gen3 x 16 is the best perfomance for the zombie Mode... |
|
|
|
|
JaniBaram
Newbie
Offline
Activity: 107
Merit: 0
|
|
February 15, 2021, 04:02:32 PM |
|
I got Asus Prime H270 Plus with 2x PCIEX16 Slots. But only the first slot gives me 26mhs, the second 16x slot is not working as the other. Tried swapping out GPUs to see if it's due to the GPU but not.
I already have enabled Gen3 + 4g decoding in Bios.. Not sure what to do :/
|
|
|
|
|
redtyhyt
Newbie
Offline
Activity: 15
Merit: 2
|
|
February 15, 2021, 04:56:56 PM |
|
I got Asus Prime H270 Plus with 2x PCIEX16 Slots. But only the first slot gives me 26mhs, the second 16x slot is not working as the other. Tried swapping out GPUs to see if it's due to the GPU but not.
I already have enabled Gen3 + 4g decoding in Bios.. Not sure what to do :/
Did a quick google search on your mobo, it seems like the second 16x slot is only able to handle x4 mode which explains why the second 16x slot is slower. Same thing with my rig. One GPU is hashing 28 MH/s, second GPU is hashing around 20 MH/s and they are both directly connected to the mobo. |
|
|
|
|
flo0
Newbie
Offline
Activity: 5
Merit: 0
|
|
February 15, 2021, 07:08:32 PM |
|
If I put an sapphire rx480 4gb in pci express 16x, zombie mode will working in lolminer windows release? Hashrate will increase around 25-28 mhs?
|
|
|
|
|
|
forato
|
|
February 15, 2021, 07:29:29 PM |
|
Is it possible to use remote manager (Claymore app) to control LOL miner?
I can use remote manager with phoenixminer and also with teamredminer, but did not find a solution to add the lolminer api into remote manager
|
|
|
|
|
catfish78
Newbie
Offline
Activity: 142
Merit: 0
|
|
February 15, 2021, 08:13:00 PM |
|
Thank you, Gen3 + enabled 4g decoding
Thanks! Will try tomorrow... have only remote monitoring to that "rig" atm: gpu0 -- 23.84 MH/s gpu1 -- 24.56 MH/s not good at all... even my old spare H81 with 1 x RX470 gives 27.55 MH/s |
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
February 15, 2021, 09:42:30 PM |
|
Is it possible to use remote manager (Claymore app) to control LOL miner?
I can use remote manager with phoenixminer and also with teamredminer, but did not find a solution to add the lolminer api into remote manager
I think is not yet implemented... |
|
|
|
|
Foxy4321
Newbie
Offline
Activity: 62
Merit: 0
|
|
February 15, 2021, 10:34:51 PM |
|
|
|
|
|
|
ivomm
Legendary
Offline
Activity: 1855
Merit: 2842
All good things to those who wait
|
|
February 16, 2021, 07:06:11 AM |
|
On SMOS both versions 1.23 and 1.24 crash on each 4GB card, no matter what value for --4g-alloc-size parameter is set. Version 1.22 works well except 560 cards, there it often goes to 0 hash and the rig freezes. Again, I tried many parameters from 3900 to 4080. Sometimes 560 starts, sometimes not. And after several hours it goes to 0.
Yeah, I have done some tests here and concluded the same thing, "On SMOS both versions 1.23 and 1.24 crash on each 4GB card,". I am experiencing the exact same issues with lolminer 1.23 and 1.24 in SMOS. 124a seems to have fixed it, hashrate seems to be the same. At first glance 1.24a worked on SMOS, but after several hours some serious troubles began. May be it is related to the MB, I don't know. I'm with asus B250 ME with 12 AMD cards, 10 of which are 4GB. The rig completely freezes at some point, and only cold restart can help. During that time my switch goes nuts and all other rigs on the network stop working. It seems that the damage the versions 1.23-1.24a do to the SMOS and the network are pretty bad. And I spent all day trying to fix it without luck. Now I'm with 1.22 again, although I have some issues with 3 cards, going to 0 hash for --4g-alloc-size parameter set between 4074 and 4080. I will continue trying below 4074, although for the 560 card I know that this won't help. There are some invalid shares which are fixed for 560 in 1.23-1.24a, but I can't run these versions because some bug causes these severe crashes. All other 9 cards are working fine with 4080. Anyway, soon I will have to switch to another coin, so it is not a big issue for me. Unless lolminer surprisingly finds a way to restore the full hashrate by some magic with the DAG file. |
|
|
|
|
JaniBaram
Newbie
Offline
Activity: 107
Merit: 0
|
|
February 16, 2021, 09:46:28 AM |
|
I got Asus Prime H270 Plus with 2x PCIEX16 Slots. But only the first slot gives me 26mhs, the second 16x slot is not working as the other. Tried swapping out GPUs to see if it's due to the GPU but not.
I already have enabled Gen3 + 4g decoding in Bios.. Not sure what to do :/
Did a quick google search on your mobo, it seems like the second 16x slot is only able to handle x4 mode which explains why the second 16x slot is slower. Same thing with my rig. One GPU is hashing 28 MH/s, second GPU is hashing around 20 MH/s and they are both directly connected to the mobo. You are right. First GPU is at 29.5 MHs and second at 17-18 MHs. Well it's better than the 12 MHs I was getting through the riser anyway. |
|
|
|
|
inspirashun
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 16, 2021, 02:41:00 PM |
|
Hello, excellent program! I have been using for a few months with much success, I am a big fan of temperature monitoring of the vram on my 5700xts.
I have come across a recent issue which I dont know how to solve. When I mine with ethermine I have no problems. When I switch to flexpool, there is a serious issue. When the miner loses connection to the pool, upon reconnection, I get nothing but miner side stale shares. lolminer will loop for many hours with stales and reconnect attempts. All is well when I close and restart the miner. I do not know of a way to automate this process, and I have not had any success getting lolminer to rebuild the DAG or restart itself during this condition. Is there anyway to have a switch to trigger 'rebuild DAG after X stale shares'? I get constant reconnects but a new DAG or restart of the program seems to be a fix.
Many thanks!
|
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
February 16, 2021, 03:23:08 PM |
|
6900xt testing here...
Seems like AMD new RX graphics cards are detected as 2 single GPUs:
Here ist the lolminer startup detection:
Setup Miner...
Device 0:
Name: Radeon 6800 series
Address: 45:0
Vendor: Advanced Micro Devices (AMD)
Memory: 16368 MByte (16304 MByte free)
Max epoch (approx): 1916
Active: true (Selected Algorithm: ETHash)
Device 1:
Name: Radeon 6800 series
Address: 45:0
Vendor: Advanced Micro Devices (AMD)
Memory: 16368 MByte (16304 MByte free)
Max epoch (approx): 1916
Active: true (Selected Algorithm: ETHash)
Then it starts DAG generation for "both" cards, but DAG generation for GPU1 never finishes!
Start DAG gen on GPU 0 (normal mode)
Start DAG gen on GPU 1 (normal mode)
Finished DAG gen on GPU 0 (3941 ms)
And here ist the statistics. 60mh/s listed on "GPU 0" but "GPU 1" does nothing.
So...maybe alle Miners only use half of the RX graphics cards wasting 50% of their possible hashrate? That would be a possible 120-130mh/s ETHASH for a RX6900xt.
edit: starting lolminer two times with ETHASH does not work. DAG can only be generated once, maybe because both detected "cards" share the same memory.
edit2: all available miners show the RX cards with only half of the real compute units (CU). The 6900xt has 80 compute units but only 40 are detected.
Nice to see it ... the 120-130Mhs is not possible... the bandwith is limited in 6900XT, the max should be around 65-66Mhs with a a big OC and MOD... |
|
|
|
|
|
