Claymore's CryptoNote Windows CPU Miner v4.0

[Claymore]

Why you miner gives me this crappy info?
Not enough RAM even 26GB out of 32GB are free on a 64bit System? 



Can I hook a graple and shot the joker?

API VirtualAlloc returned ERROR_NO_SYSTEM_RESOURCES error. That is all I can say from your screenshot.

[ioglnx]

Well I found the problem  - in EnableLUA = 0 does it :-D
Even the UAC was already disabled but this wasn't enough..so I have to say sorry not your fault :-D

[IzeQMaXX]

see timestamps, it's not 20 minutes!

Miner has two threads: main and for devfee. One of them did not get job for 20 mins.

Have a similar problem:

Mi GPU works do very well mining, always said "Share Accepted"
 http://i66.tinypic.com/js0nqg.jpg

But my CPU Doesnt say that: and ges Disconect every 20 min, how can fix that plz?

http://i68.tinypic.com/1zg96hl.jpg

Actually using Claymore XMR 9.4 in GPU and Claymore 3.5 for CPU

i tried with minerd and wolf but the hash on CPU  down to 160 h/s; in claymore i got 290 h/s.

[angellr21]

This is my POOL.txt

stratum+tcp://xmr-usa.dwarfpool.com:8005
stratum+tcp://xmr-usa.dwarfpool.com:8050
stratum+tcp://xmr-usa.dwarfpool.com:8100
stratum+tcp://xmr-usa.dwarfpool.com:8080

This is my pool 64bit.bat

NsCpuCNMiner64.exe -u 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.7afcaf04551be39a1bcfb304d2d526fb18548edcfa4a9f22f9a09e327b5c8a 49.0 -p x -t 3

FAIL-OVER is not working.

No new jobs were received for 20 mins - something wrong with this pool, disconnect.
Stratum - connecting to 'xmr-usa.dwarfpool.com' <198.50.156.114> port 8005

[BTCBusinessConsult]

I was having alot of issues connecting to XMR dwarfpool also. I think I eventually switched to a different pool and never had issues.

Mind you I am a hobby miner and run my miner for an hour or two on the weekends to try and understand how it works.

[tvvmobile]

Hi i have about 220h/s XMR minig at Slow mode  and 131 h/s "fast mode". How i can enable slow mode again? Core i7 2600 3,4

[Claymore]

Hi i have about 220h/s XMR minig at Slow mode  and 131 h/s "fast mode". How i can enable slow mode again? Core i7 2600 3,4

Specify undocumented option "-del". Miner must show "deletion: 1" message if successfull. Admin rights are required. After it, start miner without admin rights and it won't be able to enable fast mode again.

[ioglnx]

Hello claymore,

I lately had the issue that the miner stops doing anything and if I press a key it starts saying outdated shares 1000s of them and then stating pool maybe had problems and mines again.
It states then the pool had problem but it happened now 3 times in 1h and minergate techs say no issues :-(

What else could cause the miner to pause or hold ?

[Claymore]

Hello claymore,

I lately had the issue that the miner stops doing anything and if I press a key it starts saying outdated shares 1000s of them and then stating pool maybe had problems and mines again.
It states then the pool had problem but it happened now 3 times in 1h and minergate techs say no issues :-(

What else could cause the miner to pause or hold ?

Windows 10 if you clicked inside of terminal window, if you see cursor inside of terminal it means that Windows paused application and wait until you select text and press escape.
If it is not the case then I have no other ideas.

[ioglnx]

Okay I thought it might happen like this - well should go with my Watchdog and run it as startInfo.UseShellExecute = $false:-D

[tvvmobile]

Hi i have about 220h/s XMR minig at Slow mode  and 131 h/s "fast mode". How i can enable slow mode again? Core i7 2600 3,4

Specify undocumented option "-del". Miner must show "deletion: 1" message if successfull. Admin rights are required. After it, start miner without admin rights and it won't be able to enable fast mode again.

thnks , i have about 254 h/s but now time to time another problem:

09/07/16-15:49:46 - SHARE FOUND (target 2375) - (THR 2 of 4)
09/07/16-15:49:48 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:49:49 - SHARE FOUND (target 2375) - (THR 1 of 4)
09/07/16-15:49:51 - SHARE FOUND (target 2375) - (THR 3 of 4)
09/07/16-15:49:51 - SHARE FOUND (target 2375) - (THR 1 of 4)
09/07/16-15:49:59 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:50:03 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:50:06 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:50:09 - SHARE FOUND (target 2375) - (THR 2 of 4)
09/07/16-15:50:13 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:50:23 - SHARE FOUND (target 2375) - (THR 1 of 4)
09/07/16-15:50:30 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:50:59 - SHARE FOUND (target 2375) - (THR 3 of 4)
09/07/16-15:51:00 - SHARE FOUND (target 2375) - (THR 3 of 4)
09/07/16-15:51:13 - SHARE FOUND (target 2375) - (THR 1 of 4)
09/07/16-15:51:23 - SHARE FOUND (target 2375) - (THR 2 of 4)
09/07/16-15:51:25 - SHARE FOUND (target 2375) - (THR 1 of 4)
cannot find block data:
{"jsonrpc":"2.0","error":{"code":-42,"message":"Timeout"},"result":null}
cannot convert blob data
09/07/16-15:51:53 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:51:56 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:52:04 - SHARE FOUND (target 2375) - (THR 1 of 4)
09/07/16-15:52:06 - SHARE FOUND (target 2375) - (THR 0 of 4)

how enable no log option?

[wubulubudubdub73]

Hey Claymore, I use several of your miners, they are great and I really appreciate your work!

Right now I'm running into an issue with this cpu miner. I have been mining XMR just fine at 400h/s with my i7-5930k auto-overclocked to 3.9ghz. Today I began manually overclocking it, first by setting voltage to 1.25 and 4.0ghz. However, now your miner says AES-NI is unsupported and I'm getting 115h/s D=

Any idea why bumping my overclock up .1ghz would devastate my hashrate so much?

Edit:
reset voltage to auto and turned MSI's auto-OC back on. Miner is still saying AES-NI is unsupported....

[Claymore]

Hey Claymore, I use several of your miners, they are great and I really appreciate your work!

Right now I'm running into an issue with this cpu miner. I have been mining XMR just fine at 400h/s with my i7-5930k auto-overclocked to 3.9ghz. Today I began manually overclocking it, first by setting voltage to 1.25 and 4.0ghz. However, now your miner says AES-NI is unsupported and I'm getting 115h/s D=

Any idea why bumping my overclock up .1ghz would devastate my hashrate so much?

Edit:
reset voltage to auto and turned MSI's auto-OC back on. Miner is still saying AES-NI is unsupported....

This issue is not related to the miner. It must be some BIOS setting, or OS setting, or hardware problem.

[402blownstroker]

I recently got this setup on my rig at work.  Thanks all... 

[Confusman]

Hi claymore. I got some newbie question here. How i want to calcute my profit. And can i know the best wallet for xmr.

Thanks

[Eyedol-X]

Hi i have about 220h/s XMR minig at Slow mode  and 131 h/s "fast mode". How i can enable slow mode again? Core i7 2600 3,4

Specify undocumented option "-del". Miner must show "deletion: 1" message if successfull. Admin rights are required. After it, start miner without admin rights and it won't be able to enable fast mode again.

thnks , i have about 254 h/s but now time to time another problem:

09/07/16-15:49:46 - SHARE FOUND (target 2375) - (THR 2 of 4)
09/07/16-15:49:48 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:49:49 - SHARE FOUND (target 2375) - (THR 1 of 4)
09/07/16-15:49:51 - SHARE FOUND (target 2375) - (THR 3 of 4)
09/07/16-15:49:51 - SHARE FOUND (target 2375) - (THR 1 of 4)
09/07/16-15:49:59 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:50:03 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:50:06 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:50:09 - SHARE FOUND (target 2375) - (THR 2 of 4)
09/07/16-15:50:13 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:50:23 - SHARE FOUND (target 2375) - (THR 1 of 4)
09/07/16-15:50:30 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:50:59 - SHARE FOUND (target 2375) - (THR 3 of 4)
09/07/16-15:51:00 - SHARE FOUND (target 2375) - (THR 3 of 4)
09/07/16-15:51:13 - SHARE FOUND (target 2375) - (THR 1 of 4)
09/07/16-15:51:23 - SHARE FOUND (target 2375) - (THR 2 of 4)
09/07/16-15:51:25 - SHARE FOUND (target 2375) - (THR 1 of 4)
cannot find block data:
{"jsonrpc":"2.0","error":{"code":-42,"message":"Timeout"},"result":null}
cannot convert blob data
09/07/16-15:51:53 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:51:56 - SHARE FOUND (target 2375) - (THR 0 of 4)
09/07/16-15:52:04 - SHARE FOUND (target 2375) - (THR 1 of 4)
09/07/16-15:52:06 - SHARE FOUND (target 2375) - (THR 0 of 4)

how enable no log option?

I have am running multiple systems with starting today and I noticed 2 of the systems got this Jsonrpc error. One both systems I hit enter a couple of times and I got a bunch of time out messages and then it went on mining.

I've found on all the systems getting to mine in fast mining mode is kind of a dance with running a command prompt as administrator, browsing to the directory and launching the pool64.bat -- if it doesn't work I reboot and try again.

Sometimes I just run the NsCpuCNMiner64 without any commands, let it error out and then launch Pool64.bat and it launches in fast mode.

That being said, I too have noticed it running slow in fast mode vs slow on an skylake-i3 and on 3 haswell-i7's only slightly faster running fast vs slow mode.

Hope this feedback helps, I got logs if needed from all the systems.

I should also point out that all systems I'm running this on are running AMD R9 390's or RX 480s with ETH+SIA enabled at the same time. I notice no difference in mining speeds on the dual miner.

[Lucky - Luciano]

Does anyone know why  my miner will not start from the Startup (not start on all computers, OS is WIN 8.1 )?

[Beoga]

v3.5 (x64 only)

- Added Nicehash pool support.

Can you help what command line I should to use for Nicehash pool?

[Claymore]

v3.5 (x64 only)

- Added Nicehash pool support.

Can you help what command line I should to use for Nicehash pool?

Yeah I added Nicehash support. But after that, when some more people started using new version, I found that their pool does not support my miner, the problem is on their side:
https://bitcointalk.org/index.php?topic=638915.msg16255606#msg16255606
They don't want to change anything so I must change code in my miner again to support this pool, these change require a lot of time so currently Nicehash is not supported.

[Eyedol-X]

v3.5 (x64 only)

- Added Nicehash pool support.

Can you help what command line I should to use for Nicehash pool?

Yeah I added Nicehash support. But after that, when some more people started using new version, I found that their pool does not support my miner, the problem is on their side:
https://bitcointalk.org/index.php?topic=638915.msg16255606#msg16255606
They don't want to change anything so I must change code in my miner again to support this pool, these change require a lot of time so currently Nicehash is not supported.

For what its worth. for about 6 Hours I used both this and your GPU version on Nicehash last week and it worked or at least appeared to work across several of my miners. I saw hashing on Nicehash consistent with what I expected.

For anyone else reading this YMMV

Here this the command that worked (or appeared to work) for me

NsCpuCNMiner64.exe -o stratum+tcp://cryptonight.usa.nicehash.com:3355 -u WALLET_ADDRESS -p WORKERNAME