Luke-Jr
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
September 20, 2012, 11:33:47 PM |
|
Your current cgsnoop does not work with bfgminer 2.8.0. It doesn't output "Temperature" anymore via the API if none of your devices can show the temperature... thanks. in general, bamt makes no attempt to have compatibility with software/versions other than those it comes with or delivers via fixer/apt. in this case it is likely that we'll be packaging bfg 2.8.0 in the near future though, so this is good to know. Pretty sure this has been the case since 2.5.0, FWIW.
|
|
|
|
lodcrappo (OP)
|
|
September 20, 2012, 11:44:03 PM |
|
Your current cgsnoop does not work with bfgminer 2.8.0. It doesn't output "Temperature" anymore via the API if none of your devices can show the temperature... thanks. in general, bamt makes no attempt to have compatibility with software/versions other than those it comes with or delivers via fixer/apt. in this case it is likely that we'll be packaging bfg 2.8.0 in the near future though, so this is good to know. Pretty sure this has been the case since 2.5.0, FWIW. BAMT supports 2.3.1, anything else has "you're on your own" status for now.
|
|
|
|
tnkflx
|
|
September 21, 2012, 07:57:27 AM |
|
lodcrappo, Your current cgsnoop does not work with bfgminer 2.8.0. It doesn't output "Temperature" anymore via the API if none of your devices can show the temperature... Here is an ugly hack for cgsnoop Add the following on line 166: while ($res =~ m/\|PGA=(\d+),.*?MHS\sav=([\d\.]+).*?Accepted=(\d+),Rejected=(\d+)/g) { $msg .= '|' . $1 . ':{"fan_speed":"0","current_temp_0":"N/A","current_core_clock":"0","current_load":"99","hashrate":' . $2 . ',"shares_invalid":"' . $6 . '","fan_rpm":"0","shares_accepted":"' . $5 . '","pool_url":"cgsnoop/' . $host . '","desc":"FPGA (cgsnoop)","current_mem_clock":"0","current_core_voltage":"0"}';
if ($verbose) { print "PGA $1\n"; } }
thanks. in general, bamt makes no attempt to have compatibility with software/versions other than those it comes with or delivers via fixer/apt. in this case it is likely that we'll be packaging bfg 2.8.0 in the near future though, so this is good to know. I'll create better patches over the weekend, I've had to adapt both mgpumon & cgsnoop.
|
| Operating electrum.be & us.electrum.be |
|
|
|
abracadabra
|
|
September 22, 2012, 03:05:36 AM |
|
My rock-solid 5-gpu rig has during the last four days developed an issue and I dont have a clue as to what is causing it or what I should check next. At random intervals I find the rig idling, no mining going on, a simple restart mining does not resolve the issue, whereas a powerdown or coldreboot does. The main pool is up (I've even had the pool op check logs for anythig unusual... nothing there), the two backup pools are up, there has been no interruption in the network connection.
Miner: Phoenix Bamt version: fully patched 0.5
Other thing's I've checked: the flashdrive running bamt is not full.
Any ideas/suggestions would be greatly appreciated.
[edit] The only variable that has (somewhat) changed during the period this issue appeared I can think of is that the rig is getting cooler air as it is outdoors and it's fall here.
Does the rig still have network connectivity?
|
|
|
|
purelithium
|
|
September 23, 2012, 09:20:15 PM |
|
Is there a github for the new version? Any word on release date?
|
Like my post? 1H7bfRYh7F89mfmFgsRCdn4awDaUHQmYqY
|
|
|
BitMinerN8
|
|
September 25, 2012, 11:23:59 PM |
|
Is there a github for the new version? Any word on release date?
bump
|
|
|
|
PinkBatman
|
|
September 27, 2012, 09:14:32 AM |
|
I just started using this (it's great) but I can't seem to get the system to run with the clocks I have set in the bamt.conf file. Also there is no file in the /BAMT/CONTROL/ACTIVE/ which people had said to check.
If it matters I am running 2 5970s (only using 3 GPUs as one is bad).
Thanks
|
|
|
|
abracadabra
|
|
September 28, 2012, 01:40:49 AM |
|
I just started using this (it's great) but I can't seem to get the system to run with the clocks I have set in the bamt.conf file. Also there is no file in the /BAMT/CONTROL/ACTIVE/ which people had said to check.
If it matters I am running 2 5970s (only using 3 GPUs as one is bad).
Thanks
does it run fine not OC'd? copy the noOC file into ACTIVE from CONTROL
|
|
|
|
PinkBatman
|
|
September 28, 2012, 03:08:30 AM |
|
does it run fine not OC'd?
copy the noOC file into ACTIVE from CONTROL
It runs. Just not well. I get about 320mh/s per core. But I'm sure I can get more out of them with less power since the memory is running at 1000mhz.
|
|
|
|
abracadabra
|
|
September 28, 2012, 11:20:22 PM |
|
does it run fine not OC'd?
copy the noOC file into ACTIVE from CONTROL
It runs. Just not well. I get about 320mh/s per core. But I'm sure I can get more out of them with less power since the memory is running at 1000mhz. change the clocks in small amounts from stock. What are the exact clocks you are running?
|
|
|
|
PinkBatman
|
|
September 28, 2012, 11:30:02 PM Last edit: September 29, 2012, 04:03:17 AM by PinkBatman |
|
Currently they are stuck at 725/1000 @ 1.05v. I would like to run them at 875/300 @ 1.075v.
|
|
|
|
abracadabra
|
|
September 29, 2012, 03:37:33 AM |
|
I'd try 775/1000 first.
|
|
|
|
PinkBatman
|
|
September 29, 2012, 04:02:59 AM |
|
I'd love to, but like I said, changing the clocks in the bamt.conf file don't change the clocks that the system is mining at.
|
|
|
|
Joshwaa
|
|
September 29, 2012, 01:15:39 PM |
|
atitweak is your friend...
|
|
|
|
Nancarrow
|
|
September 29, 2012, 09:03:48 PM |
|
I'd love to, but like I said, changing the clocks in the bamt.conf file don't change the clocks that the system is mining at.
At the risk of talking down to you... have you uncommented the relevant lines in bamt.conf? You need to remove the beginning '#' on any line that you want to take effect. And of course, remove noOC from blah/blah/ACTIVE if you put it in there to test the cards. I've seen you want to run the cards at 875/300/1.075. Ouch! I'm not sure it's possible to set the voltage above 1.05 in BAMT. If I were you, I'd leave them at 725/1000/1.05 for a day or two. Then gradually reduce the memclocks by 100 MHz at a time until you get to 300 MHz, leaving them for a few hours or a day at each intermediate setting to check they're happy. Then once you're at 725/300/1.05, bump up the engine clock similarly but in increments of 5 or 10 MHz until you get to 800 (or possibly 810 if they can take it... not in my experience) Of course all that assumes you actually can set the clocks at all. Have you tried running atiweak? Do the following on a command line: atitweak -A0 -P2 -m900 Then check with gpumon and/or the web interface, that the memclock has been set properly. If it hasn't then something's very wrong.
|
If I've said anything amusing and/or informative and you're feeling generous: 1GNJq39NYtf7cn2QFZZuP5vmC1mTs63rEW
|
|
|
Nancarrow
|
|
September 29, 2012, 09:08:51 PM |
|
It runs. Just not well. I get about 320mh/s per core. But I'm sure I can get more out of them with less power since the memory is running at 1000mhz.
That sounds about right for stock settings (I get 321 or 322 so neener neener). If you can get the memclock down to 300 MHz successfully that'll get you 327ish and less heat and power consumption (actually not sure how much power you save, but less heat is always good). At 800/300 they can do 369 MH/s.
|
If I've said anything amusing and/or informative and you're feeling generous: 1GNJq39NYtf7cn2QFZZuP5vmC1mTs63rEW
|
|
|
abracadabra
|
|
September 29, 2012, 11:31:28 PM |
|
I'd love to, but like I said, changing the clocks in the bamt.conf file don't change the clocks that the system is mining at.
Ah... bamt.conf is YAML. Spacing/indentation is important. Mess up the spacing and the conf settings aren't used. Use space bar, not tab. Post your bamt.conf on pastebin and provide the link here.
|
|
|
|
PinkBatman
|
|
September 30, 2012, 12:03:31 AM |
|
At the risk of talking down to you... have you uncommented the relevant lines in bamt.conf? You need to remove the beginning '#' on any line that you want to take effect. And of course, remove noOC from blah/blah/ACTIVE if you put it in there to test the cards.
This was it! Thanks so much. And, if that is in one of the docs I must have missed it so I apologize for that. Thanks for the advice on the clocks too! Thanks everyone that helped aswell!
|
|
|
|
deadwoodluke
Newbie
Offline
Activity: 29
Merit: 0
|
|
October 04, 2012, 09:11:39 PM |
|
Is the website down? I want to download it....
|
|
|
|
Joshwaa
|
|
October 05, 2012, 04:39:11 PM |
|
Yes it's down. I was looking for another img to burn myself.
|
|
|
|
|