jddebug
|
|
March 19, 2013, 04:28:27 AM |
|
I'm in the US. Will one of these work on my 15-20amp circuit? I have all 110V lines of course, regular house. Do I need to install a 240 or something?
It only uses 600 watts. Should be fine on any 110 outlet unless you have a coffee maker and a microwave on it too.
|
|
|
|
johnyj
Legendary
Offline
Activity: 1988
Merit: 1012
Beyond Imagination
|
|
March 19, 2013, 02:06:11 PM |
|
PSU cold air intake is a little bit insufficient, I'm planning to add a fan out side of PSU exhaust to help cool the PSU. Currently at -1c degree there is no problem, but when summer arrives, ambient temperature could reach 25+, it will become an issue
|
|
|
|
ProfMac
Legendary
Offline
Activity: 1246
Merit: 1002
|
|
March 19, 2013, 03:15:21 PM |
|
PSU cold air intake is a little bit insufficient, I'm planning to add a fan out side of PSU exhaust to help cool the PSU. Currently at -1c degree there is no problem, but when summer arrives, ambient temperature could reach 25+, it will become an issue
Summer ambient for me can reach 43°C.
|
I try to be respectful and informed.
|
|
|
luffy
|
|
March 19, 2013, 04:09:16 PM |
|
Anyone have such high HW errors? What does this indicate?
[Getworks] => 1963 [Accepted] => 27062 [Rejected] => 963 [Hardware Errors] => 866 [Utility] => 30.57 [Discarded] => 3649
your utility is very low! assuming that you are in a stratum pool try to set variable difficulty at 64 to 66, i am not sure about the exact number though :p
|
|
|
|
Tinua
|
|
March 19, 2013, 04:47:14 PM Last edit: March 19, 2013, 05:36:34 PM by Tinua |
|
Anyone have such high HW errors? What does this indicate?
[Getworks] => 1963 [Accepted] => 27062 [Rejected] => 963 [Hardware Errors] => 866 [Utility] => 30.57 [Discarded] => 3649
your utility is very low! assuming that you are in a stratum pool try to set variable difficulty at 64 to 66, i am not sure about the exact number though :p Hi luffy how big should it be (Utility)? I have also about 30.5. (vardiff 32) Edit: With vardiff 64 i get 15.5 Utility
|
|
|
|
johnyj
Legendary
Offline
Activity: 1988
Merit: 1012
Beyond Imagination
|
|
March 19, 2013, 04:55:30 PM |
|
Anyone have such high HW errors? What does this indicate?
[Getworks] => 1963 [Accepted] => 27062 [Rejected] => 963 [Hardware Errors] => 866 [Utility] => 30.57 [Discarded] => 3649
your utility is very low! assuming that you are in a stratum pool try to set variable difficulty at 64 to 66, i am not sure about the exact number though :p Where do I set that?
|
|
|
|
SolarSilver
Legendary
Offline
Activity: 1112
Merit: 1000
|
|
March 19, 2013, 08:13:40 PM |
|
your utility is very low! assuming that you are in a stratum pool try to set variable difficulty at 64 to 66, i am not sure about the exact number though :p
Where do I set that? it's usually in the registration of your worker at the pool you use that you can set the initial value, but as far as I understand the pool will adjust according to your work results. So it should only have an impact on the first activities By the way, these are the numbers I'm getting from btcguild: [SUMMARY] => ( [0] => SUMMARY [Elapsed] => 69956 [MHS av] => 71381.83 [Found Blocks] => 0 [Getworks] => 2573 [Accepted] => 36271 [Rejected] => 150 [Hardware Errors] => 815 [Utility] => 31.11 [Discarded] => 4786 [Stale] => 0 [Get Failures] => 0 [Local Work] => 1223915 [Remote Failures] => 0 [Network Blocks] => 144 [Total MH] => 4993602159.0807 [Work Utility] => 1001.57 [Difficulty Accepted] => 1160672.00000000 [Difficulty Rejected] => 4800.00000000 [Difficulty Stale] => 0.00000000 [Best Share] => 1430374 )
|
|
|
|
01BTC10
VIP
Hero Member
Offline
Activity: 756
Merit: 503
|
|
March 19, 2013, 08:17:43 PM Last edit: March 19, 2013, 09:04:54 PM by 01BTC10 |
|
How loud are these things? Also looks like if you have 20amp circuits you can only have 3 units per circuit assuming you don't have a ton of other stuff already plugged in! Then maybe just 2. So much power use...
Avalon unit use 620W @ 120V so it draw 5.17amp/unit. It's not recommended to load a circuit over 80% capacity. So 80% of 20amp = 16amp. 3 units @ 5.17amp = 15.51amp. No problem with 3 units. At 220V and 600W (I don't have the exact spec but the unit should be a little more efficient) it draw 2.73amp/unit so it's possible to connect 5-6 units (13.9-16.38amp) using the same wire gauge. It might be a good idea for some user to hire an electrician to install a custom circuit. Disclaimer : I'm not an electrician so double check these numbers with a professional.
|
|
|
|
kano
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
March 19, 2013, 08:57:43 PM Last edit: March 19, 2013, 10:17:06 PM by kano |
|
Anyone have such high HW errors? What does this indicate?
[Getworks] => 1963 [Accepted] => 27062 [Rejected] => 963 [Hardware Errors] => 866 [Utility] => 30.57 [Discarded] => 3649
your utility is very low! assuming that you are in a stratum pool try to set variable difficulty at 64 to 66, i am not sure about the exact number though :p Hi luffy how big should it be (Utility)? I have also about 30.5. (vardiff 32) Edit: With vardiff 64 i get 15.5 UtilityUtility doesn't mean much on variable difficulty ... To check your diff1 utility, obviously, 60*Difficulty Accepted/Elapsed e.g. for SolarSilver above me: 60 * 1160672 / 69956 = 995.49 1diff shares a minute To verify that: 995.49 * 2^32 / 60 = 71.26GH/s P.S. don't read this, I'm evil Edit: N.B. of course utility doesn't map exactly to MH/s - that mathematical relationship is random and converges over a long period of time So really I should have written above To verify that: 995.49 * 2^32 / 60 ~= 71.26GH/s
|
|
|
|
luffy
|
|
March 19, 2013, 09:20:07 PM |
|
my results: [Elapsed] => 83792 [MHS av] => 71481.37 [Found Blocks] => 0 [Getworks] => 1493 [Accepted] => 1382251 [Rejected] => 7422 [Hardware Errors] => 2172 [Utility] => 989.77 [Discarded] => 2887 [Stale] => 190 [Get Failures] => 1 [Local Work] => 1462331 [Remote Failures] => 96 [Network Blocks] => 166 [Total MH] => 5989585917.9822 [Work Utility] => 1002.88 [Difficulty Accepted] => 1390275.00000000 [Difficulty Rejected] => 7422.00000000 [Difficulty Stale] => 0.00000000 [Best Share] => 931191
|
|
|
|
muyuu
Donator
Legendary
Offline
Activity: 980
Merit: 1000
|
|
March 19, 2013, 10:04:23 PM |
|
Sorry if I'm asking in the wrong thread but here it goes:
Are there any significant differences between batches #1 and #2? any expected for #3?
|
GPG ID: 7294199D - OTC ID: muyuu (470F97EB7294199D) forum tea fund BTC 1Epv7KHbNjYzqYVhTCgXWYhGSkv7BuKGEU DOGE DF1eTJ2vsxjHpmmbKu9jpqsrg5uyQLWksM CAP F1MzvmmHwP2UhFq82NQT7qDU9NQ8oQbtkQ
|
|
|
muyuu
Donator
Legendary
Offline
Activity: 980
Merit: 1000
|
|
March 19, 2013, 11:06:06 PM |
|
Sorry if I'm asking in the wrong thread but here it goes:
Are there any significant differences between batches #1 and #2? any expected for #3?
No batch 2 ASICs have been received AFAIK. Any differences according to description?
|
GPG ID: 7294199D - OTC ID: muyuu (470F97EB7294199D) forum tea fund BTC 1Epv7KHbNjYzqYVhTCgXWYhGSkv7BuKGEU DOGE DF1eTJ2vsxjHpmmbKu9jpqsrg5uyQLWksM CAP F1MzvmmHwP2UhFq82NQT7qDU9NQ8oQbtkQ
|
|
|
jddebug
|
|
March 20, 2013, 12:39:06 AM |
|
Sorry if I'm asking in the wrong thread but here it goes:
Are there any significant differences between batches #1 and #2? any expected for #3?
No batch 2 ASICs have been received AFAIK. Any differences according to description? Nothing other than something in an email along the lines of learning from problems they had in batch 1. Edit: Also, batch 1 were a couple of hundred dollars cheaper. Wasn't there something about adding an extra slot of time allows?
|
|
|
|
organofcorti
Donator
Legendary
Offline
Activity: 2058
Merit: 1007
Poor impulse control.
|
|
March 20, 2013, 12:53:39 AM |
|
Sorry if I'm asking in the wrong thread but here it goes:
Are there any significant differences between batches #1 and #2? any expected for #3?
No batch 2 ASICs have been received AFAIK. Any differences according to description? Nothing other than something in an email along the lines of learning from problems they had in batch 1. Edit: Also, batch 1 were a couple of hundred dollars cheaper. Wasn't there something about adding an extra slot of time allows? I'll rephrase that, then: Nothing confirmed other than something in an email along the lines of learning from problems they had in batch 1.
|
|
|
|
johnyj
Legendary
Offline
Activity: 1988
Merit: 1012
Beyond Imagination
|
|
March 20, 2013, 02:17:38 AM |
|
your utility is very low! assuming that you are in a stratum pool try to set variable difficulty at 64 to 66, i am not sure about the exact number though :p
Where do I set that? it's usually in the registration of your worker at the pool you use that you can set the initial value, but as far as I understand the pool will adjust according to your work results. So it should only have an impact on the first activities Thanks, I just found out this option under worker settings, now I set it to 64 and see what's going to happen...
|
|
|
|
Bogart
Legendary
Offline
Activity: 966
Merit: 1000
|
|
March 20, 2013, 02:22:53 AM |
|
Sorry if I'm asking in the wrong thread but here it goes:
Are there any significant differences between batches #1 and #2? any expected for #3?
Batch 2 units cost $140 more, after you account for shipping. Batch 2 units "might" have 6 module slots instead of 4, but would still ship with only 3 modules initially installed. A different payment processor is used for each batch.
|
"All safe deposit boxes in banks or financial institutions have been sealed... and may only be opened in the presence of an agent of the I.R.S." - President F.D. Roosevelt, 1933
|
|
|
buyshowher
Newbie
Offline
Activity: 13
Merit: 0
|
|
March 20, 2013, 03:20:46 AM |
|
Help!!! after I setup the ip address , it show " luci - Lua configuration interface" What shall I do? Who can help me?
|
|
|
|
Bogart
Legendary
Offline
Activity: 966
Merit: 1000
|
|
March 20, 2013, 03:38:30 AM |
|
Help!!! after I setup the ip address , it show " luci - Lua configuration interface" What shall I do? Who can help me? See the "cgminer" tabs? Check those out.
|
"All safe deposit boxes in banks or financial institutions have been sealed... and may only be opened in the presence of an agent of the I.R.S." - President F.D. Roosevelt, 1933
|
|
|
buyshowher
Newbie
Offline
Activity: 13
Merit: 0
|
|
March 20, 2013, 03:53:31 AM |
|
Help!!! after I setup the ip address , it show " luci - Lua configuration interface" What shall I do? Who can help me? See the "cgminer" tabs? Check those out. Can't get in
|
|
|
|
Bogart
Legendary
Offline
Activity: 966
Merit: 1000
|
|
March 20, 2013, 03:54:57 AM |
|
I think you just login as "root", with no password.
|
"All safe deposit boxes in banks or financial institutions have been sealed... and may only be opened in the presence of an agent of the I.R.S." - President F.D. Roosevelt, 1933
|
|
|
|