j2james
Newbie
Offline
Activity: 80
Merit: 0
|
|
March 16, 2018, 11:32:18 AM Last edit: March 16, 2018, 11:59:10 AM by j2james |
|
Can I set the epools.txt (dpools.txt) files as an option in command line or in config.txt file? Because switching to another coin I need different alternative pools.
You can do it in bat file like I do it. I have the following file structure for Claymore: [Claymore 10.6] [Claymore 11.5] epools.txt reboot.bat start-mining.bat [Claymore 10.6] and [Claymore 11.5] are folders where corresponded versions of Claymore are placed. epools.txtPOOL: eth-eu1.nanopool.org:9999, WALLET: <wallet>/rig1/user@gmail.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0 POOL: eth-eu2.nanopool.org:9999, WALLET: <wallet>/rig1/user@gmail.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0 POOL: eth-us-east1.nanopool.org:9999, WALLET: <wallet>/rig1/user@gmail.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0 POOL: eth-us-west1.nanopool.org:9999, WALLET: <wallet>/rig1/user@gmail.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0 POOL: eth-asia1.nanopool.org:9999, WALLET: <wallet>/rig1/user@gmail.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0 reboot.batstart-mining.bat@echo off
rem ******************************** rem * wallet: * rem * private * rem * btc-trade * rem * pool: * rem * ethermine * rem * nanopool * rem ********************************
rem ---------- SETUP DATA ----------
set claymore_path=Claymore 10.6 set claymore_params=-mport -3333 -minspeed 187 -r 1 -tt 30 -ttli 63 -tstop 65 -tstart 40 set wallet=private set pool=nanopool
rem --------------------------------
setx GPU_FORCE_64BIT_PTR 0 > nul setx GPU_MAX_HEAP_SIZE 100 > nul setx GPU_USE_SYNC_OBJECTS 1 > nul setx GPU_MAX_ALLOC_PERCENT 100 > nul setx GPU_SINGLE_ALLOC_PERCENT 100 > nul
timeout /t 15
cls
if "%wallet%" == "btc-trade" set wallet_address=0x00000dec3e7a3743b14651d8e49a4564ee200000 if "%wallet%" == "private" set wallet_address=0x000007517a8eFD4104Ba3c482F0B89692dA00000
powershell -command "(gc epools.txt) -replace '<wallet>', '%wallet_address%' | Out-File -Encoding ascii '%claymore_path%\epools.txt'"
copy /Y reboot.bat "%claymore_path%\reboot.bat" > nul
cd %claymore_path%
@echo on
@if "%pool%" == "ethermine" goto :ETHERMINE
:NANOPOOL
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal %wallet_address%/rig1/user@gmail.com -epsw x %claymore_params%
@goto :END
:ETHERMINE
@rem EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal %wallet_address%/rig1 -epsw x %claymore_params% EthDcrMiner64.exe -epool ssl://eu1.ethermine.org:5555 -ewal %wallet_address%/rig1 -epsw x %claymore_params%
:END
@pause Of course something should be changed and you do not need something, but it can help you how it can be done.
|
|
|
|
LucianoBM
Newbie
Offline
Activity: 15
Merit: 0
|
|
March 16, 2018, 11:34:51 AM |
|
Hello guys, I am a noob miner since 2 months. From 10.6 to 11.4, i have got a same problem.
I have 6 RX588 rig, 30M hashrate for each card.
Sometimes after restarting the Claymore, or after reboot the machine and then start the Claymore, the Hashrate will down to 26 or 27, it may be return to 30 by itself after one or two hour, maybe not.
If i disable the GPU by clicking the number for 5 sec, and then enable it, the hashrate will be return to 30.
Does anyone has the same problem or the solution?
Thanks ~~~~~~~~~~~
Nobody else has the same problem? I always had and still have this issue. Not a big issue since disabling and enabling get the hashrate back to expected. I don't know why this happens but @zibastian explanation makes sense. This is an issue with the driver, preventing the correct voltage to be applied after a GPU crash. You can also just restart the miner and you should get your hashrate back. This is not linked to Claymore, you should have the same behaviour with any miner
|
|
|
|
MaxMidnite
Newbie
Offline
Activity: 143
Merit: 0
|
|
March 16, 2018, 11:40:07 AM |
|
Im getting problem: ethdcrminer64 has stopped working And other miner also, only when adding 6 cards with latest Ati 18.3.2 drivers. Is this driver issue and not compatible, strange 5 cards seem to work. Pleas3e check it?
|
|
|
|
atecubanoS
Newbie
Offline
Activity: 32
Merit: 0
|
|
March 16, 2018, 11:55:41 AM Last edit: March 16, 2018, 12:37:20 PM by atecubanoS |
|
Can I set the epools.txt (dpools.txt) files as an option in command line or in config.txt file? Because switching to another coin I need different alternative pools.
You can do it in bat file like I do it. I have the following file structure for Claymore: [Claymore 10.6] [Claymore 11.5] epools.txt reboot.bat start-mining.bat [Claymore 10.6] and [Claymore 11.5] are folders where corresponded versions of Claymore are placed. epools.txtPOOL: eth-eu1.nanopool.org:9999, WALLET: <wallet>/rig1/user@gmail.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0 POOL: eth-eu2.nanopool.org:9999, WALLET: <wallet>/rig1/user@gmail.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0 POOL: eth-us-east1.nanopool.org:9999, WALLET: <wallet>/rig1/user@gmail.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0 POOL: eth-us-west1.nanopool.org:9999, WALLET: <wallet>/rig1/user@gmail.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0 POOL: eth-asia1.nanopool.org:9999, WALLET: <wallet>/rig1/user@gmail.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0 reboot.batstart-mining.bat@echo off
rem ******************************** rem * wallet: * rem * private * rem * btc-trade * rem * pool: * rem * ethermine * rem * nanopool * rem ********************************
rem ---------- SETUP DATA ----------
set claymore_path=Claymore 10.6 set claymore_params=-mport -3333 -minspeed 187 -r 1 -tt 30 -ttli 63 -tstop 65 -tstart 40 set wallet=private set pool=nanopool
rem --------------------------------
setx GPU_FORCE_64BIT_PTR 0 > nul setx GPU_MAX_HEAP_SIZE 100 > nul setx GPU_USE_SYNC_OBJECTS 1 > nul setx GPU_MAX_ALLOC_PERCENT 100 > nul setx GPU_SINGLE_ALLOC_PERCENT 100 > nul
timeout /t 15
cls
if "%wallet%" == "btc-trade" set wallet_address=0x00000dec3e7a3743b14651d8e49a4564ee200000 if "%wallet%" == "private" set wallet_address=0x000007517a8eFD4104Ba3c482F0B89692dA00000
powershell -command "(gc epools.txt) -replace '<wallet>', '%wallet_address%' | Out-File -Encoding ascii '%claymore_path%\epools.txt'"
copy /Y reboot.bat "%claymore_path%\reboot.bat" > nul
cd %claymore_path%
@echo on
@if "%pool%" == "ethermine" goto :ETHERMINE
:NANOPOOL
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal %wallet_address%/JAMES-MINER/user@gmail.com -epsw x %claymore_params%
@goto :END
:ETHERMINE
@rem EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal %wallet_address%/JAMES-MINER -epsw x %claymore_params% EthDcrMiner64.exe -epool ssl://eu1.ethermine.org:5555 -ewal %wallet_address%/JAMES-MINER -epsw x %claymore_params%
:END
@pause Of course something should be changed and you do not need something, but it can help you how it can be done. Nice Job! I made something similar (but not so sophisticated) at Linux. #!/bin/bash
# CARREGA CONFIG GPU # gpu.conf.sh
MINER_HOME="/home/MyUser/Claymore/v11.5"
SERV_ETH="eth-us-east1.nanopool.org" PORT_ETH="9999" USR_ETH="walletaddress.Worker/my@email.com" PWD_ETH=""
SERV_DUAL="pasc-us-east1.nanopool.org" PORT_DUAL="15555" USR_DUAL="wallet.address.WorkerPASC/my@email.com" PWD_DUAL=""
#JAXX Wallet $MINER_HOME/ethdcrminer64 -epool $SERV_ETH:$PORT_ETH -ewal $USR_ETH -mode 1 -ftime 10 -mport -8080
#JAXX (ETH) Wallet + PASCAL Wallet #$MINER_HOME/ethdcrminer64 -epool $SERV_ETH:$PORT_ETH -ewal $USR_ETH -dcoin pasc -dpool $SERV_DUAL:$PORT_DUAL -dwal $USR_DUAL -ftime 10 -mport -8080 So... If I want to change to dual mining, I just comment out the Single mining line (adding #) and uncomment the dual mining line (removing #).
|
|
|
|
whoismoses
Member
Offline
Activity: 247
Merit: 59
|
|
March 16, 2018, 11:58:58 AM |
|
Just updating my results of using 11.5 with the -oldkernels flag...
I have a couple rigs that it still doesn't help on that I've had to roll back to 11.2.
|
|
|
|
DiHunter
Member
Offline
Activity: 154
Merit: 28
|
|
March 16, 2018, 12:01:42 PM |
|
Can I set the epools.txt (dpools.txt) files as an option in command line or in config.txt file? Because switching to another coin I need different alternative pools.
You can do it in bat file like I do it. I have the following file structure for Claymore: ... Of course something should be changed and you do not need something, but it can help you how it can be done. Thanks. The code is good. Allthough it does not solve my problem as-is (alternative pools in epools.txt differ for ethermine and nanopool, following your example), but it can be modifyed. After Claymore's next update there will be an embedded option for setting alternative pools. Nevertheless you showed me a good way for futher automatisation.
|
|
|
|
j2james
Newbie
Offline
Activity: 80
Merit: 0
|
|
March 16, 2018, 12:02:30 PM |
|
Nice Job! Hi. Can you change my real email to user@gmail.com. I replaced it only in one place and forget to do it in another one.
|
|
|
|
crypper
Member
Offline
Activity: 239
Merit: 12
|
|
March 16, 2018, 12:11:12 PM |
|
Stale share is a share that is sent too late, when pool is already working on new block.
So, that means you worked on a share too long, and lower difficulty of shares (set by the pool) should theoretically decrease the number of stale shares... Is that right? because I often hear just the opposite. Anyone can clarify? thanks
|
|
|
|
atecubanoS
Newbie
Offline
Activity: 32
Merit: 0
|
|
March 16, 2018, 12:21:04 PM |
|
Nice Job! Hi. Can you change my real email to user@gmail.com. I replaced it only in one place and forget to do it in another one. I don't understand what you are trying to do... can you elaborate? Thanks!
|
|
|
|
j2james
Newbie
Offline
Activity: 80
Merit: 0
|
|
March 16, 2018, 12:27:33 PM |
|
Nice Job! Hi. Can you change my real email to user@gmail.com. I replaced it only in one place and forget to do it in another one. I don't understand what you are trying to do... can you elaborate? Thanks! Please edit your message and change my real email in my quoted text. Thank you
|
|
|
|
atecubanoS
Newbie
Offline
Activity: 32
Merit: 0
|
|
March 16, 2018, 12:36:18 PM |
|
Nice Job! Hi. Can you change my real email to user@gmail.com. I replaced it only in one place and forget to do it in another one. I don't understand what you are trying to do... can you elaborate? Thanks! Please edit your message and change my real email in my quoted text. Thank you Done, my friend!
|
|
|
|
j2james
Newbie
Offline
Activity: 80
Merit: 0
|
|
March 16, 2018, 12:41:20 PM |
|
Nice Job! Hi. Can you change my real email to user@gmail.com. I replaced it only in one place and forget to do it in another one. I don't understand what you are trying to do... can you elaborate? Thanks! Please edit your message and change my real email in my quoted text. Thank you Done, my friend! Thank you, my friend!
|
|
|
|
MaxMidnite
Newbie
Offline
Activity: 143
Merit: 0
|
|
March 16, 2018, 01:53:03 PM |
|
Hey man Im getting this error, any ideas?
Faulting application name: EthDcrMiner64.exe, version: 0.0.0.0, time stamp: 0x5aa91985 Faulting module name: igdrclneo64.dll, version: 0.0.0.0, time stamp: 0x5a96b19b Exception code: 0xc0000005 Fault offset: 0x0000000000030819 Faulting process id: 0x704 Faulting application start time: 0x01d3bd2dcce86dee Faulting application path: C:\Users\Max\Downloads\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.5\EthDcrMiner64.exe Faulting module path: C:\WINDOWS\System32\DriverStore\FileRepository\igdlh64.inf_amd64_250db833a1cd577e\igdrclneo64.dll Report Id: f06b3f20-a28a-4664-8cce-8a58b561b034 Faulting package full name: Faulting package-relative application ID:
|
|
|
|
Ratledge
Jr. Member
Offline
Activity: 84
Merit: 1
|
|
March 16, 2018, 02:05:22 PM |
|
It seems we're hearing a good bit of "things didn't work right" for about two days, mostly ending a couple of days ago.
I have been sick so not keeping up, and missed the 11.4 version, and went directly to 11.5. I haven't really noticed anything major except that my standard deviation (amount of change in the average hash rate) has been a bit tighter, and the stales seem to have dropped a bit.
Draw your own conclusion. (?)
|
|
|
|
Zerb
Newbie
Offline
Activity: 2
Merit: 0
|
|
March 16, 2018, 02:06:20 PM |
|
Hi, since a few days ago when the claymore is connected the word unsecure appears in the ip of the pool, in the following way:
ETH: Stratum - connecting to 'us1.ethermine.org' <18.219.59.155> port 4444 (unsecure)
Is there a problem? I did not have that before, how can I solve it? Thank you.
|
|
|
|
dumbcane
Newbie
Offline
Activity: 5
Merit: 0
|
|
March 16, 2018, 02:27:33 PM |
|
Hello
I am running latest CentOS 7.4 with the CUDA 9.x drivers and all-NVIDIA cards. When I start the latest 11.5 miner, I get shared library errors for libssl.so.1.0.0 and libcrypt.so.1.0.0
Both /usr/lib64/libcrypto.so and libss.lso points to libcrypto.so.1.0.2k and libssl.so.1.0.2k, respectively.
If I attempt to symbolically link libssl.so.1.0.0 to libssl.so.1.0.2k Claymore returns:
./lib64/libcrypto.so.1.0.0. version `OPENSSL_1.0.0' not found (required by ./ethdcrminer64) Same for ./lib64/ssl.1.0.0
Anyone know why the distributions between Debian and CentOS are different? Any workarounds? Help I have 9 rigs like this! Stuck on v11.0 for now.
|
|
|
|
Lunga Chung
Member
Offline
Activity: 277
Merit: 23
|
|
March 16, 2018, 02:38:30 PM |
|
Can some explain how exactly is dcri auto adjust working?
Every time i restart the miner i see different values, also are values changed dynamically during mining or are defined at startup. The suggested values seem a bit high (talking about eth solo mining) 8 is I guess default, some cards get between 10~14 (use to have on 10.6 dcri set to 5-6). Is this auto adjust for the new AMD kernel?
|
|
|
|
leonix007
Sr. Member
Offline
Activity: 1008
Merit: 297
Grow with community
|
|
March 16, 2018, 02:53:11 PM |
|
Hi, since a few days ago when the claymore is connected the word unsecure appears in the ip of the pool, in the following way:
ETH: Stratum - connecting to 'us1.ethermine.org' <18.219.59.155> port 4444 (unsecure)
Is there a problem? I did not have that before, how can I solve it? Thank you.
No Not at all, if you want a pool connection that is more secure then use the SSL with port 5555 Hey man Im getting this error, any ideas?
Faulting application name: EthDcrMiner64.exe, version: 0.0.0.0, time stamp: 0x5aa91985 Faulting module name: igdrclneo64.dll, version: 0.0.0.0, time stamp: 0x5a96b19b Exception code: 0xc0000005 Fault offset: 0x0000000000030819 Faulting process id: 0x704 Faulting application start time: 0x01d3bd2dcce86dee Faulting application path: C:\Users\Max\Downloads\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.5\EthDcrMiner64.exe Faulting module path: C:\WINDOWS\System32\DriverStore\FileRepository\igdlh64.inf_amd64_250db833a1cd577e\igdrclneo64.dll Report Id: f06b3f20-a28a-4664-8cce-8a58b561b034 Faulting package full name: Faulting package-relative application ID:
could you post your .bat file?
|
|
|
|
gedeonodn
Newbie
Offline
Activity: 9
Merit: 0
|
|
March 16, 2018, 03:08:20 PM |
|
Is there a way to let claymore control fan with -tt flag (linux amd-pro drivers) without giving it root permissions?
I feel dirty running it as root.
chown root: ethdcrminer64 chmod 4755 ethdcrminer64 And now you run app as user, but it have root permissions.
|
|
|
|
atecubanoS
Newbie
Offline
Activity: 32
Merit: 0
|
|
March 16, 2018, 04:08:32 PM |
|
Hi, since a few days ago when the claymore is connected the word unsecure appears in the ip of the pool, in the following way:
ETH: Stratum - connecting to 'us1.ethermine.org' <18.219.59.155> port 4444 (unsecure)
Is there a problem? I did not have that before, how can I solve it? Thank you.
you've been hacked. what would be the solution? Don't believe him. He is a real noob! He can't even specify his system specs when reporting problems...
|
|
|
|
|