eafindme
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 01:02:05 PM |
|
I'm sick to death of my miner crashing. I have six rx 470 8gb sapphire cards and it can run ok for days, then locks up. Then I have to restart it about 10-20 times because I constantly get the message "Ethdcrminer64.exe has stopped working". Then I go into GPUZ and see that one of the cards is not reporting data fully. After 10 restart or so it starts working again, and I get a few more days mining, sometimes less.
What could be causing this? All cards are cool, well ventilated running at 74 degrees contant. this issue is really pissing me off now. All parts are relatively high quality, EVGA power supply etc.
I am running win 10 64 bit
remove and reseat everything. run memtest86 overnight. all vbios stock? No I modded them for extra mining capabilities and it worked well for a while but now it's crashing a lot. I am sick to death of the "Dcrethminer64.exe has stopped working" error. Check gpu-z for cards with Hynix ram lol. GPUZ reports the ram as 8gb samsung. But sometimes certain bits of data are missing from the gpuz report on one card or another. Can't remember exactly which bits of data, they are usually blank. When you see that you know without doubt claymore is going to crash. But sometimes it still crashes when GPU is reporting everything is OK on all cards. It's a shame because if this carries on I will have to sell up. I just ROI'd thanks to the ethereum price shooting up but I wanted to run it for a year or so. It is taking up so much time now and I cannot nail down the issue(s). Do you check the PCIE riser? GPU also draw power from motherboard through PCIE.
|
|
|
|
kostickole92
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 01:03:38 PM |
|
plz help, have 6x rx480 dual 8gb (mod bios) and so many problems with cards, stability and fluctuations 28-29mh/s to 15mh/s and les .....use Claymore 9.2, and 16.11.5 driver, overcloc 1100CC / 2000MC ...... can any put here what is the best over cloack for this cards, and good seting for claymor, i dont understand whats is -ams 0 or -ams 1 , 2 plz explain some ....whats best setings for DUAL, and only ETH.... sorry for bad English
|
|
|
|
eafindme
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 01:16:53 PM |
|
plz help, have 6x rx480 dual 8gb (mod bios) and so many problems with cards, stability and fluctuations 28-29mh/s to 15mh/s and les .....use Claymore 9.2, and 16.11.5 driver, overcloc 1100CC / 2000MC ...... can any put here what is the best over cloack for this cards, and good seting for claymor, i dont understand whats is -ams 0 or -ams 1 , 2 plz explain some ....whats best setings for DUAL, and only ETH.... sorry for bad English
Did you try to adjust the -dcri parameter? Try to adjust with +/- key while running to get best mining speed.
|
|
|
|
ccgmining
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 01:31:04 PM |
|
Hello,
I do need a help. I'm running few rigs under ethOS on RX480 8GB. So my issue is, that on every rig in diffrent time I got problem "WATCHDOG: GPU 0 hangs in OpenCL call, exit" (different cards on different rigs and getting this error in different time in different rigs - from 60 minuts after start till few hours/days). So the problem is, that after getting message "Restarting OK, exit..." theoretically Claymore should restart, but I'm just getting "ssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss" message all the time, while rig is on.
Does anybody know what issue it could be? For sure the matter of this message is raiser and overlocking (in some cases I'm gettin this problem with not overlocked cards)
When I do putting some commands to reboot.bash, it doesn't work at all :/ What could be an issue?
My config file is :
-mode 0 -colors 1 -di 012345 -dbg 1 -wd 1 -r 1 -epool eth-eu.dwarfpool.com:8008 -ewal ***/*** -epsw x -dcoin dcr -dcri 17,17,17,17,17,17 -dpool dcr.coinmine.pl:2222 -dwal **.** -dpsw **ccgmining
Thanks in advance
вaм лyчшe вce пpoпиcaть в "start.bat" , в peжимe "dual" вpяд ли бyдeт paбoтaть c "config", "-mode 0" и "-dcoin dcr" нe нyжны, oни тaкиe пo yмoлчaнию, "-di 012345" тoжe нe oбязaтeльнo: EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal ***/*** -epsw x -dpool dcr.coinmine.pl:2222 -dwal **.** -dpsw ** -dcri 17 ocтaльнoe - в "config" Alex, y мeня Linux ethOS. Becь вoпpoc в тoм, чтo пocлe зaвиcaния, Claymore выдaeт "sssss" и нeт никaкoгo пepeзaгpyзки. У мeня нeт бaтникoв.
|
|
|
|
kostickole92
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 01:38:55 PM |
|
plz help, have 6x rx480 dual 8gb (mod bios) and so many problems with cards, stability and fluctuations 28-29mh/s to 15mh/s and les .....use Claymore 9.2, and 16.11.5 driver, overcloc 1100CC / 2000MC ...... can any put here what is the best over cloack for this cards, and good seting for claymor, i dont understand whats is -ams 0 or -ams 1 , 2 plz explain some ....whats best setings for DUAL, and only ETH.... sorry for bad English
Did you try to adjust the -dcri parameter? Try to adjust with +/- key while running to get best mining speed. Yep i try that, and noting, same problem ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
eafindme
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 01:53:22 PM |
|
plz help, have 6x rx480 dual 8gb (mod bios) and so many problems with cards, stability and fluctuations 28-29mh/s to 15mh/s and les .....use Claymore 9.2, and 16.11.5 driver, overcloc 1100CC / 2000MC ...... can any put here what is the best over cloack for this cards, and good seting for claymor, i dont understand whats is -ams 0 or -ams 1 , 2 plz explain some ....whats best setings for DUAL, and only ETH.... sorry for bad English
Did you try to adjust the -dcri parameter? Try to adjust with +/- key while running to get best mining speed. Yep i try that, and noting, same problem ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Sometimes inappropriately modded BIOS can cause a stability issue. Also try to overclock from Crimson software only, not from miner software, coz I got a similar issue before by adjusting GPU parameters from miner software itself. I mem clocked to 2050 and so far so good to my RX470.
|
|
|
|
Wicard
Newbie
Offline
Activity: 54
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 01:56:08 PM |
|
Hey ,guys! I'm new to the forum.I wish you everyone good luck with mining and everything else. I'm kinda new to Etherium mining too and maybe asking newbie questions but i can't find the answers on my own for now.
I do only Etherium mining at ethermine pool
Here is my problem:
Everything was fine on 8.1 Claymore miner.After installing Claymore dual miner 9.2 it started to crash on start right after it shows the green title for my 6 cards.I have a 6 x RX 470 8 GB (Micron memory) Sapphire Nitro on Asrock Pro BTC v2.0 with dual PSU Fortron Hyper 700M (add2psu).OS Windows 10 Pro.Crimson 16.9.2 drivers.Cards are bios moded and making 168.5 MH/s (miner's statistic) .940W power consumption total.I'm using MSI afterburner with synchronized settings for all cards.I found they are working fine on -84 down voltage 1150/2000.Temps-below 60.
For now i tried to play with voltages with no luck and switched back to 8.1.
What do you think might be the problem?Drivers?Overclocking?Or something else?
Thanks in advance!
PS.Windows is crashing with blue screen and start to restart.After restart ,same thing over and over again since i have make my miner to restart auto in shell:startup.
I'm using 16.9.2 as people says 15.2 are not for RX 4xx series...
Hi, I had some sort of the same issue, only when I used -84 undervolt , I'm using -48 now and seems to be working for me, also try to install Crimson 16.11.15 , it works better. ( I do have RX480's 8Gb ) Hope it helps..
|
|
|
|
chup
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 736
Merit: 262
Me, Myself & I
|
![](https://bitcointalk.org/Themes/custom1/images/post/lamp.gif) |
April 25, 2017, 02:04:04 PM |
|
Apparently there is no RX470, AMD went from 460 to 480. The 470 is just an overclocked 460 with 4GB that the mfg's decided to call a 470. They (the mfg's) had no reference design, stuffed in ram they found in a recycling bin and pawned them off on unsuspecting consumers.
That being said, I'll be getting some rx460's with 4GB samsung ram later this week for half the cost of a 480.
Good luck with Your purchase. Of course they are the same if You omit fact that You need two RX460 to match one RX470/480 hashrate.
|
|
|
|
Wicard
Newbie
Offline
Activity: 54
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 02:08:15 PM |
|
Hi all, I don't really check my ethermine hash rate graph but I checked it recently and suprised to find the results fluctuating a lot, not sure if its normal...take a look: http://funkyimg.com/i/2sfNe.pngWhen checking my console i rarely see the rate deviate from the 130's (almost always at 140) but the chart says a different story. Is it correct? Is it like this for all of you ? Having the same issue.. http://funkyimg.com/i/2sfSb.jpg
|
|
|
|
LeonManveli
Newbie
Offline
Activity: 23
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 02:14:52 PM |
|
Thank you Claymore for your works!!.. but v9.2 can't mine on http://yiimp.ccminer.org when ccminer-2.0-rc3 works perfectly.. may be.. what I do wrong? Same here. Changes to decredpool but now get 100% rejects. only nicehash decred is working, but I need DCR payout ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
Trimegistus
Legendary
Offline
Activity: 1564
Merit: 1027
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 02:15:43 PM |
|
only nicehash decred is working, but I need DCR payout ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Suprnova DCR is also working
|
|
|
|
chronek
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 273
Merit: 250
BD People Are Legend
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 02:16:41 PM |
|
plz help, have 6x rx480 dual 8gb (mod bios) and so many problems with cards, stability and fluctuations 28-29mh/s to 15mh/s and les .....use Claymore 9.2, and 16.11.5 driver, overcloc 1100CC / 2000MC ......
Try 1200/2000 , for me with asm if not core power enough it fluctuate somehow...
|
|
|
|
Trimegistus
Legendary
Offline
Activity: 1564
Merit: 1027
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 02:27:32 PM |
|
Hi all, I don't really check my ethermine hash rate graph but I checked it recently and suprised to find the results fluctuating a lot, not sure if its normal...take a look: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Ffunkyimg.com%2Fi%2F2sfNe.png&t=665&c=b8hwTR49Z4_-vw) When checking my console i rarely see the rate deviate from the 130's (almost always at 140) but the chart says a different story. Is it correct? Is it like this for all of you ? Having the same issue.. http://funkyimg.com/i/2sfSb.jpgI don't think this problem is exclusive to Claymore's miner. I've also tried single mining ETH with sg-miner and with GG and they all have a similar behavior. Keep in mind that there is a luck factor involved; our GPUs will not find solutions at a constant rate. Therefore, some degree of fluctuation is to be expected. However.... I agree that this might be too much ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
notbatman
Legendary
Offline
Activity: 2212
Merit: 1038
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 02:34:48 PM Last edit: April 25, 2017, 02:46:49 PM by notbatman |
|
Apparently there is no RX470, AMD went from 460 to 480. The 470 is just an overclocked 460 with 4GB that the mfg's decided to call a 470. They (the mfg's) had no reference design, stuffed in ram they found in a recycling bin and pawned them off on unsuspecting consumers.
That being said, I'll be getting some rx460's with 4GB samsung ram later this week for half the cost of a 480.
Good luck with Your purchase. Of course they are the same if You omit fact that You need two RX460 to match one RX470/480 hashrate. Somebody said they're getting 20+ Mh/s on the 4GB card, I'll be getting one to find out if that's the case. In any case MSI has taken back their $350 a pop twin garbage cards and I'm stuck without cards or cash and a broken promise that they would call me in "two weeks"; this sucks almost as much as asic pre-order scams. These cards hurt less at $150 a pop if I'm going to get screwed like that on them.
|
|
|
|
jackbox
Legendary
Offline
Activity: 1246
Merit: 1024
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 03:19:39 PM |
|
Apparently there is no RX470, AMD went from 460 to 480. The 470 is just an overclocked 460 with 4GB that the mfg's decided to call a 470. They (the mfg's) had no reference design, stuffed in ram they found in a recycling bin and pawned them off on unsuspecting consumers.
That being said, I'll be getting some rx460's with 4GB samsung ram later this week for half the cost of a 480.
Good luck with Your purchase. Of course they are the same if You omit fact that You need two RX460 to match one RX470/480 hashrate. Somebody said they're getting 20+ Mh/s on the 4GB card, I'll be getting one to find out if that's the case. In any case MSI has taken back their $350 a pop twin garbage cards and I'm stuck without cards or cash and a broken promise that they would call me in "two weeks"; this sucks almost as much as asic pre-order scams. These cards hurt less at $150 a pop if I'm going to get screwed like that on them. I don't think that is true about the MSI RX 470 chips actually being RX 460s. My RX 470 from MSI hashes very fast. I have an MSI RX 470 Armor 8GB with Samsung ram and it is stock with an unmodded bios. I have only overclocked the memory to 2000MHz (8000) using MSI Afterburner. I am using Claymore Dual Miner on Windows 10 with 16.300.2311.0 driver and getting about 23.5 MH/s on ETH and 280 MH/s on PASC. My -dcri is set to 12. That was the sweet spot for my card.
|
|
|
|
Wicard
Newbie
Offline
Activity: 54
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 03:48:34 PM |
|
Hi all, I don't really check my ethermine hash rate graph but I checked it recently and suprised to find the results fluctuating a lot, not sure if its normal...take a look: http://funkyimg.com/i/2sfNe.pngWhen checking my console i rarely see the rate deviate from the 130's (almost always at 140) but the chart says a different story. Is it correct? Is it like this for all of you ? Having the same issue.. http://funkyimg.com/i/2sfSb.jpgI don't think this problem is exclusive to Claymore's miner. I've also tried single mining ETH with sg-miner and with GG and they all have a similar behavior. Keep in mind that there is a luck factor involved; our GPUs will not find solutions at a constant rate. Therefore, some degree of fluctuation is to be expected. However.... I agree that this might be too much ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Yes, for me this started when using 9.2 but I am DUAL mining ETC+DCR but there is that factor of difficulty increase and it did started around 9.2 got released ... although it does suck I'm down from 1.4ETC to under 1 per day... at 60.6MH/s on PC.
|
|
|
|
Trimegistus
Legendary
Offline
Activity: 1564
Merit: 1027
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 03:56:34 PM |
|
This is the result from one of my tests, running Claymore and Gateless Gate. Over a 24 hour period you can see the fluctuations. Claymore's miner was used during the period with the green spots for reported hashrate: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FULRSZzQ.png&t=665&c=0n63NNSGNyZ4yA)
|
|
|
|
Teress
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 04:05:48 PM |
|
Hey ,guys! I'm new to the forum.I wish you everyone good luck with mining and everything else. I'm kinda new to Etherium mining too and maybe asking newbie questions but i can't find the answers on my own for now.
I do only Etherium mining at ethermine pool
Here is my problem:
Everything was fine on 8.1 Claymore miner.After installing Claymore dual miner 9.2 it started to crash on start right after it shows the green title for my 6 cards.I have a 6 x RX 470 8 GB (Micron memory) Sapphire Nitro on Asrock Pro BTC v2.0 with dual PSU Fortron Hyper 700M (add2psu).OS Windows 10 Pro.Crimson 16.9.2 drivers.Cards are bios moded and making 168.5 MH/s (miner's statistic) .940W power consumption total.I'm using MSI afterburner with synchronized settings for all cards.I found they are working fine on -84 down voltage 1150/2000.Temps-below 60.
For now i tried to play with voltages with no luck and switched back to 8.1.
What do you think might be the problem?Drivers?Overclocking?Or something else?
Thanks in advance!
PS.Windows is crashing with blue screen and start to restart.After restart ,same thing over and over again since i have make my miner to restart auto in shell:startup.
I'm using 16.9.2 as people says 15.2 are not for RX 4xx series...
Hi, I had some sort of the same issue, only when I used -84 undervolt , I'm using -48 now and seems to be working for me, also try to install Crimson 16.11.15 , it works better. ( I do have RX480's 8Gb ) Hope it helps.. You mean probably Crimson 16.11.5, not Crimson 16.11.15...
|
|
|
|
forbidden
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 04:13:14 PM |
|
@Claymore; Remote Manager execute .bat file function is not working I developed SMS sending app, because i do not know when to stop my rig(s) I tried it now, it works right sample.bat start and running my SMS application if i add new client to miners list with the wrong IP address! (red error) But is not working (can't start sample.bat) running miner(s) stopped work. I need start sample.bat if it stops working miners. Thx.
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2017, 04:40:03 PM |
|
Hi guys ! Correct me if Im wrong. If i see 1100 watt from the wall on my wattmeter , so on 80+ Standard PSU its 1100*0.8=880 power load of PSU. And its good enough for PSUs working conditions (1000Watt Chieftech)? I mean its about 85% of its full load.
Right ?
If you have a 1000W PSU how can you see 1100 at the wall? Something is wrong... The 80+ standard is a measure of efficiency. No PSU will deliver 100% of its nominal output, 10~20% is lost in heat. Therefore, a 1000W PSU will only deliver ~800W within a limited range of loads, and not at full load. Got it? A 1000W PSU will never "suck" 1100w from the wall.... A quality 1000w PSU easily outputs 1000w to DC side, depending on efficiency under 100% load you see much higher numbers at the wall. For example, corsair rm1000 at 100% load - 89% efficiency @ 230Vac - 1123w (1000/0.89) at the wall. And you can easily overload them too, not saying I would do it but it is possible. Like i thought . Thanks all for the info and help. Im cool now. Wattage of the PSU is the output ability not input. Here's a nice explanation, from Corsair, about PSUs bronze,gold,platinum and the differences. http://www.corsair.com/en-us/blog/2012/august/80-plus-platinum-what-does-it-mean-and-what-is-the-benefit-to-menice tables to show the difference in DC output and AC input. THERE IS A GREAT DEAL OF MISINFORMATION ON THE WEB-- Thank you for the manufacturer's guide. Whether it be by trolls, or poorly informed individuals, there is a lot of junk info to discard. Overloading a PSU an cause fire, melted wires, or even an explosion. --scryptr
|
|
|
|
|