[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[tytanick]

Thanks to Soothaa continuing after I gave up. I can now run 7 570s on my 170a boards!
Anyhow, I've been carefully watching my power usage due to having to make sure I'm balancing the load of my machines across circuits. I'm not doing anything with the bios tuning to try and lower my power but I do set all them to power stage 4. With that, a 7 gpu rig runs under 1000w at the wall or just under 9 amps.

Can you tell me which image worked on Z170 ?

[1714892264]

1714892264

[1714892264]

1714892264

[tytanick]

UPDATE
THE NEW WEBSITE and DASHBOARD is up and running.
You can guys start making deposits for future fee system

[konqueror]

https://my.pcloud.com/publink/show?code=XZ5chaZO0G4alA7GcumSdCu5aeFkBHwhTgV
Put this in /usr/local/bin and chmod +x

Hi guys,

anyone got this working in smos or any linux build?

any linux experts can show how to install and make the file...

i hate going back and forth to windows and gpuz to see what memory brand is being used to flash the correct custom roms.

flashing roms using atiflash on linux is so much easier compared to windows

thanks

Tytanick - any chance in putting this tool in utility folder in next version of smOS? Thanks

That's not - oops. I misread. YES, amdmeminfo will show you the VRAM type. I read VRM manufacturer >.>

Crud. Doesn't look like it supports the 500 series. Guess I can probably figure out what to do from the source though.

Use this one: https://github.com/sling00/amdmeminfo

I have not been able to get it to build due to a lack of /tmp space to build it :/

[decayinjack]

Thanks to Soothaa continuing after I gave up. I can now run 7 570s on my 170a boards!
Anyhow, I've been carefully watching my power usage due to having to make sure I'm balancing the load of my machines across circuits. I'm not doing anything with the bios tuning to try and lower my power but I do set all them to power stage 4. With that, a 7 gpu rig runs under 1000w at the wall or just under 9 amps.

Can you tell me which image worked on Z170 ?

Tytanick,

Of the two Soothaa mentioned, I only tried simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.img. That one worked so I never tried the second one he mentioned.

[Steveolino]

Are 6 rx570 gpu's running on smos ?
Hashrate ?

[citronick]

thanks konqueror - that fixed it.... flashing roms "safely and correctly" in smos now possible

==
miner@simpleminer:~$ sudo su
root@simpleminer:/home/miner# chmod +x amdmeminfo
root@simpleminer:/home/miner# ./amdmeminfo
AMDMemInfo by Zuikkis <zuikkis@gmail.com>
Updated by Yann St.Arnaud <ystarnaud@gmail.com>
-----------------------------------
Found card: 1002:67df rev cf (AMD Radeon RX 470)
Bios Version: 113-1E3471U.S6E
PCI: 01:00.0
OpenCL ID: 0
Subvendor:  0x174b
Subdevice:  0xe347
Sysfs Path: /sys/bus/pci/devices/0000:01:00.0
Memory type: Samsung K4G41325FE
root@simpleminer:/home/miner#
===

https://my.pcloud.com/publink/show?code=XZ5chaZO0G4alA7GcumSdCu5aeFkBHwhTgV
Put this in /usr/local/bin and chmod +x

Hi guys,

anyone got this working in smos or any linux build?

any linux experts can show how to install and make the file...

i hate going back and forth to windows and gpuz to see what memory brand is being used to flash the correct custom roms.

flashing roms using atiflash on linux is so much easier compared to windows

thanks

Tytanick - any chance in putting this tool in utility folder in next version of smOS? Thanks

That's not - oops. I misread. YES, amdmeminfo will show you the VRAM type. I read VRM manufacturer >.>

Crud. Doesn't look like it supports the 500 series. Guess I can probably figure out what to do from the source though.

Use this one: https://github.com/sling00/amdmeminfo

I have not been able to get it to build due to a lack of /tmp space to build it :/

[matmator]

If i use simplemining OS, my ashrate will be identical to claymore + windows?

[fexploit]

How can update amd driver on Beta dashboard? i didn't find the button

[tytanick]

How can update amd driver on Beta dashboard? i didn't find the button

Hover on name, dont you have already 16.60 amd driver ?
Also i will add new driver once i will test them, right now beta buttons are disabled.

[daupheus]

Wonderfull update @tytanick

it's working perfectly !

try claymore dualmining 9.3

[Sequoia93]

Hey Tytanick, I think I found a small bug/potential QOL improvement.

I'm using the beta dashboard (idk if this makes a difference) and I found that in the overclock settings, if I input a new mem clock, and leave the core clock field blank, the OC fails to apply, and I receive a message saying I input a false clock value, and smos actually attributes the change to core, even though I filled out the mem clock field. This is easily worked around by just inputting the core value that the card is already set to into the core field, but feels redundant and un-intuitive.

[teomihsav]

Hi Tytanick,

 do you have an image with kernel 4.9?

[soothaa]

Thanks to Soothaa continuing after I gave up. I can now run 7 570s on my 170a boards!

Anyhow, I've been carefully watching my power usage due to having to make sure I'm balancing the load of my machines across circuits. I'm not doing anything with the bios tuning to try and lower my power but I do set all them to power stage 4. With that, a 7 gpu rig runs under 1000w at the wall or just under 9 amps.

I have $7k invested in this, I wasn't about to give up!

Yeah balancing is a bitch isn't it?

[thefixxxer]

Does anyone have any input on why core clock would stick at 751 ONLY when dual mining?  (it works but hash rate is 2/3 of what it should be for eth and DCR)  I have running fine on another rig with different mobo and video cards.  The problem board is Asus h170 Pro gaming with rx470 visionteks  4gb ram.  It will hash eth just fine solo, and I had it working when I was running win 10, dual mining, however with windows 10 I could only run 4 cards.  Even dropping down to four cards with simpleminer I am not able to effectively dual mine, hashes at 13-14 eth and around 400 dcr. 

I have tried setting core clock to 1100 in oc tool with 1750 ram, no change.  I have used both beta drivers when they were available before update, no change.    I currently have pci speed in bios at gen 2, g6 enabled.  Cant think of any of bios settings to try but I am totally open to any input, issue is driving me crazy.  I suspect it could be a driver issue.  I have try powerstate at 7 and 4.  I can set core clcok less than 751, but it will not exceed that.  When i mine eth solo it will adjust to my settings.   My other rig functions perfectly fine, however I can not dual mine effectively with a core clock of 751. 

ETH: GPU0 13.151 Mh/s, GPU1 13.027 Mh/s, GPU2 13.126 Mh/s, GPU3 13.129 Mh/s
DCR - Total Speed: 1573.013 Mh/s, Total Shares: 20, Rejected: 0
DCR: GPU0 394.527 Mh/s, GPU1 390.819 Mh/s, GPU2 393.789 Mh/s, GPU3 393.878 Mh/s
ETH: 05/15/17-05:49:10 - New job from eth-eu.dwarfpool.com:8008
ETH - Total Speed: 54.473 Mh/s, Total Shares: 15, Rejected: 0, Time: 00:05

I've been at this for days, any suggestions are very welcome. 

[tytanick]

Hi Tytanick,

 do you have an image with kernel 4.9?

No i dont, why you asking ?

[powershot]

how i set a miner for each RIG ?

Separated.

example

Rig 01 - Eth+DCR
Rig 02 - Equihash

-------

How i disable overclock ?

I have bios modded yet, but when i set clocks same bios mod, freeze and restarts my Rig.

-------
Tnx

[realter]

to Tytanick
When update for grouping rigs?
It's very inconvenient to change accounts.

Error with info data 9GPU+
Cant't overclock GPU11 - only bios mod.

http://joxi.ru/Y2Lkv0NS9OG40m

fee pay https://www.coinpayments.net/index.php?cmd=status&id=CPBE2MRRMSFSYHMLUVZLE2PT6S&key=5a008aba4b13cff6730af5902b020490

[teomihsav]

Hi Tytanick,

 do you have an image with kernel 4.9?

No i dont, why you asking ?

Because of this https://www.phoronix.com/forums/forum/linux-graphics-x-org-drivers/amd-linux/918649-underclocking-undervolting-the-rx-470-with-amdgpu-pro-success

I can't compile the kernel the file is missing with 4.9 seems to work. Do you have any idea why the undervolted bios dose't work?

[tytanick]

Because of this https://www.phoronix.com/forums/forum/linux-graphics-x-org-drivers/amd-linux/918649-underclocking-undervolting-the-rx-470-with-amdgpu-pro-success
I can't compile the kernel the file is missing with 4.9 seems to work. Do you have any idea why the undervolted bios dose't work?

You need bios with added offset. Its working then.

Rig grouping feature is closer and closer, Now after i implemented new dashboard wit totally rewriten engine i will be able to make grouping.
So hold on. Its next on the list !

[drrobert]

to Tytanick
When update for grouping rigs?
It's very inconvenient to change accounts.

Error with info data 9GPU+
Cant't overclock GPU11 - only bios mod.

http://joxi.ru/Y2Lkv0NS9OG40m

fee pay https://www.coinpayments.net/index.php?cmd=status&id=CPBE2MRRMSFSYHMLUVZLE2PT6S&key=5a008aba4b13cff6730af5902b020490

many gpus, do you use pcie usb 1 to 3 i think, what mobo do you use?
And about power consume cause you have 470 / 480 rigs with same number what is watt ratio?
atm my rigs are 8x480 (245mhs) with 1150 watt at wall, i think you have heat problem cause my hotest gpu is 55° couldest 45° (24° ambient) my rigs no extra fans installed