BartoszN1990
Full Member
 

Activity: 218
Merit: 100
https://deeponion.org
|
 |
March 01, 2017, 02:54:06 AM |
|
The Best ROM !!! . I have 29Mhz on HIS RX480 8GB by "480LowEnergyOK", Thanks all.
can u tell waht pwoer consup u have per card ? and driver ? Sure,I'm run on Crimson 16.8.3 and 90w per card by GPUz monitor. Total my rig around 1000w+ (480x6 and Fan 80%) did u just instal driver or patched ? i instal 16.9.2 and system crash .. system se card but all miners not .. i minning 6x480 at etc claymore 8.0 6x2.3 mh/s
|
|
|
|
nonsence
Newbie

Activity: 9
Merit: 0
|
 |
March 01, 2017, 03:06:14 AM |
|
The Best ROM !!! . I have 29Mhz on HIS RX480 8GB by "480LowEnergyOK", Thanks all.
can u tell waht pwoer consup u have per card ? and driver ? Sure,I'm run on Crimson 16.8.3 and 90w per card by GPUz monitor. Total my rig around 1000w+ (480x6 and Fan 80%) did u just instal driver or patched ? i instal 16.9.2 and system crash .. system se card but all miners not .. i minning 6x480 at etc claymore 8.0 6x2.3 mh/s I used crimson 16.8.3, Claymore V8 before flashed and not change because all card can run normally. I Think, You try update to 16.12.2 and patched
|
|
|
|
|
BusDeath
Newbie

Activity: 4
Merit: 0
|
 |
March 01, 2017, 08:14:43 AM Last edit: March 01, 2017, 11:00:23 AM by BusDeath |
|
I'm flashing the rom with the command line (cmd started as administrator):
atiflash -p 0 -f RX480Mod.rom
successfully.
After that the win10 => tool manager says, that the driver is hold on.
Now you have to sign the new rom with the tool: http[Suspicious link removed]
After that it works fine.
Thank you so much Eliovp for your suggestions and tipps :-)
|
|
|
|
|
Eliovp (OP)
Legendary

Activity: 1050
Merit: 1294
Huh?
|
 |
March 01, 2017, 10:59:10 AM |
|
I got a few pm's about custom rom not working with relive drivers. Fix: Atikmdag PatcherTested on windows 7 with a few relive drivers, don't ask me which ones exactly but should work on all of them i guess, 16.12 for sure. You can run it through an online antivirus thing if you don't trust me Credits
|
|
|
|
BusDeath
Newbie

Activity: 4
Merit: 0
|
 |
March 01, 2017, 11:45:22 AM |
|
I tested it under Win10 with the driver versions 16.12.2 and 17.2.1 too. It works fine.
After new driver installation you have to verify the rom again.
On my case: I cannot flash the 512 kb roms (RX480-32MhOTB, RX480-30MhOTB).
It said: "Can not flash a 0x0 length image into a 0x400000 length rom! Rom not erased. Error: 0FL01"
But the card is not bricked. It works fine with 28 Mh/s.
|
|
|
|
|
BartoszN1990
Full Member
 

Activity: 218
Merit: 100
https://deeponion.org
|
 |
March 01, 2017, 12:05:11 PM |
|
I got a few pm's about custom rom not working with relive drivers. Fix: ]Atikmdag PatcherTested on windows 7 with a few relive drivers, don't ask me which ones exactly but should work on all of them i guess, 16.12 for sure. You can run it through an online antivirus thing if you don't trust me CreditsWitch rom is vdrop power ? = low power take did u try windows 7 6x480 ? all say w7 see only 4 cards
|
|
|
|
BartoszN1990
Full Member
 

Activity: 218
Merit: 100
https://deeponion.org
|
 |
March 01, 2017, 10:32:33 PM |
|
dosnt work i try all method and no work the end always system show eror 41 or 31 .. ir all goos but when i start miner 2 or 1 card show 2/4 mh/s ,,, wtf what happen with this ;/ how to fix lowpower ?
|
|
|
|
leonix007
Sr. Member
  

Activity: 1008
Merit: 297
Grow with community
|
 |
March 03, 2017, 04:18:27 AM |
|
Any good rom eth low power for 480 red devil 8gb and 480 asus dual 4gb ? Thanks for help
I've got a 30+Mh rom, 480 8G Samsung, around 60-70watt GPU-Z. The ones i shared here years ago :p, are still good, but they're not custom timings.. Greetings! Hi Sir, My system Hanged upon flashing 30+MH ROM for XFX RX480 8G samsung, is the rom posted last yr still available, thank you for the usual help in advance.
|
|
|
|
|
BartoszN1990
Full Member
 

Activity: 218
Merit: 100
https://deeponion.org
|
 |
March 03, 2017, 01:40:48 PM |
|
Well i have sph rx 480 nitro oc 8gb when i flash u rom ;/ show 4 gb ..
|
|
|
|
|
Truthchanter
|
 |
March 03, 2017, 06:41:51 PM |
|
any reason to upgrade driver to the newer drivers like 16.12.2+ from the older ones that you don't have to patch for working with modded bioses (like 16.3.2 i think, also 16.9.x)?
|
|
|
|
|
citronick
Legendary

Activity: 1834
Merit: 1080
---- winter*juvia -----
|
 |
March 10, 2017, 08:29:50 AM |
|
I'm running the 480LowEnergyOK rom on my Asus 480 8GB Reference cards and it seems to be running really hot. Anyone having this issue? Fans are stuck at 33% according to Claymore and staying around 70*C with an outside rig where ambient temp is ~16*C.
All other cards follow fan curve in Afterburner.
Using MSI Afterburner for fan settings.
I've tried -tt 0 in Claymore with no results. Dedicated mining rig so no other fan monitoring software.
Windows 7. AMD 16.11.2.
I use the same rom mod. No issues. Have you tried -fanmin 55 - fanmax 99 ? Ensure that you use latest Claymore miner version.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
|
|
Neo_Cool
Newbie

Activity: 1
Merit: 0
|
 |
March 17, 2017, 06:16:15 PM |
|
Does this roms work for an MSI ARMOR 480 4Gb?
|
|
|
|
|
|
|
brian_elizondo
Newbie

Activity: 4
Merit: 0
|
 |
March 18, 2017, 12:09:04 PM |
|
Hello everyone Very interesting this article on RX 480, but I have some questions that I would like to help me respond. I have two Sapphire Nitro+ RX 480 4GB (Elpida) card that I would like to update the ROM so that they can mine faster in ethereum. Which file do you recommend that I should download to update the ROM of my cards? They are installed on a Win10 system with AMD Crimson 16.9.2, for me this is the best version to mine. Thank you all for all the help you can give me! 
|
|
|
|
|
Munchee
Newbie

Activity: 6
Merit: 0
|
 |
March 18, 2017, 03:45:55 PM |
|
Haha, i honestly was thinking, no way, that's impossible. So i checked the rom i uploaded, of course, it's the wrong one  Will upload the right one as soon as i get at my office. Turning Idiotic mode off again... Mate if you are still around you made my weekend with this! Running 25 mh/s dual mining with Sapphire 480 rx nitro 4GB! Stock 21.5 Previous OC at best was getting 23-24 and was very unstable. Sometimes less than 10 min, You cranked my MH and my fan speed well down too. Thanks buddy!
|
|
|
|
|
|
greaterninja
|
 |
March 19, 2017, 12:32:31 AM |
|
You should be able to get 28-32 mhs even on a rx 480 sapphire nitro.
Download your bios with atiflash, open it in polaris bios editor.
Copy the memory timing for the 1500 or 1750mhz to the 2000 mhz and higher blocks.
I believe you can copy 1500mhz memory timing code to 1750 and 2000 blocks.
Make sure you backup original bios first.
|
|
|
|
|
Munchee
Newbie

Activity: 6
Merit: 0
|
 |
March 19, 2017, 07:20:33 AM |
|
You should be able to get 28-32 mhs even on a rx 480 sapphire nitro.
Download your bios with atiflash, open it in polaris bios editor.
Copy the memory timing for the 1500 or 1750mhz to the 2000 mhz and higher blocks.
I believe you can copy 1500mhz memory timing code to 1750 and 2000 blocks.
Make sure you backup original bios first.
I don't think you can reach 28 mh's on this card surely. It's 4GB the one I got, if it were 8GB then yes possible. Right?
|
|
|
|
|
|
c1oud
|
 |
March 19, 2017, 05:45:31 PM |
|
"Asus Radeon RX 480 Strix Gaming AMD" https://www.asus.com/Graphics-Cards/ROG-STRIX-RX480-O8G-GAMING/Guys, what do you think about this 1? It seems it's not reference design. Does any of the rom's can be installed? Any1 tryed to mine with this ones? core clock at default at 1330 MHz. Considering to make a new 6 card rig with them. Need suggestions. thx
|
▄████▄ ▄████████▄ ▄████████████▄ ▄████████████████▄ ████████████████████ ▄█▄ ▄███▄ ▄███▄ ▄████████████████▀ ▄██████████ ▄▄▄▀█████▀▄▄▄▄▀█████▀▄▄▄ ▀██▄ ▄██▀ ▀██▄ ▄██▀ ▀██▄ ▄██▀ ██ ▄█████▄▀▀▀▄██████▄▀▀▀▄█████▄ ▀██▄ ▄██▀ ▀██▄ ▄██▀ ▀██▄ ▄██▀ ▄█▄ ▀██████████████▄ ████████████████████████████ ▀██▄ ▄██▀ ▀██▄ ▄██▀ ▀██▄ ▄██▀ ▀█▀ ██ ▀████████████████████████▀ ▀██▄ ▄██▀ ▀██▄ ▄██▀ ▄█▄ ▀██▄ ▄██▀ ██ ▀████████████████████▀ ▀███▀ ▀███▀ ▀█▀ ▀███▀ ▄███████████████████████████████████▀ ▀████████████████▀ ▀████████████▀ ▀████████▀ ▀████▀
| ║║ ║█ ║█ ║║ | .
| .
║║ ██ ║║
| .
| .
║║ ██ ║║
| .
| ║║ █║ █║ ║║ | |
|
|
|
|
greaterninja
|
 |
March 19, 2017, 09:46:39 PM |
|
You should be able to get 28-32 mhs even on a rx 480 sapphire nitro.
Download your bios with atiflash, open it in polaris bios editor.
Copy the memory timing for the 1500 or 1750mhz to the 2000 mhz and higher blocks.
I believe you can copy 1500mhz memory timing code to 1750 and 2000 blocks.
Make sure you backup original bios first.
I don't think you can reach 28 mh's on this card surely. It's 4GB the one I got, if it were 8GB then yes possible. Right? I don't have much time to explain so please forgive me. I have a few rx 480 4gb cards and they do 29 - 31 mh/s easily. rx 470 4gb can do 28-30 mh/s as well. You need to copy the memory timing in polaris bios editor to the 1750mhz and 2000 mhz memory timing slots. The biggest gain is by modifying the memory timing / bootstrap. Second biggest gain and efficiency is by using MSI afterburner and tweaking GPU voltage, mhz, etc. Try to change the default memory clock from 1750 mhz to target 2000 - 2050 mhz memory on 4gb cards. If it fails scale it down to 1950 mhz, 1900mhz, 1850mhz, 1800mhz until you find a stable memory clock to mine with. The only cards I've had problems bringing memory clock up is msi rx 480 4gbs.
|
|
|
|
|
|