rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
 |
August 22, 2016, 06:25:15 AM |
|
There are already some facts that this mod was done under win7 using Driver Signature Enforcement Overrider 1.3b
Will wait for card to come and try too ))
|
|
|
|
nhando
|
 |
August 22, 2016, 06:32:05 AM |
|
mostly sapphire and several his, all with 2250 memory i got one xfx and it died in several days with stock rom btw you can also look at your asic quality, if it is low, then high power rom will work better and vice versa
Yeah I've seen success with MSI on another forum. Which ASIC is considered good and which is considered bad. My XFX is running with SAMSUNG GDDR5 memory per GPU-Z.
|
Just "Mining" my own business.
|
|
|
billsmith
Newbie
Offline
Activity: 49
Merit: 0
|
 |
August 22, 2016, 08:45:10 AM |
|
More power in linux - with on-the-fly runtime changes - than Polaris BIOS editor gives you with flashing (NSFW): http://ottrbutt.com/tmp/custom-editor.jpgGoddamn I love this driver. You need to write your own tools, but the functionality is there. That's just a small part of what I can control. Where can I read more about how to do this? I based a lot of my tool off of the Linux kernel source - there they have a lot of info on the formats. From 4.8rc2 on, the PowerPlay table can be changed at runtime. Thanks for the tip. But the flashing still need to change the memory timings.
|
|
|
|
echo00114
Member

Offline
Activity: 72
Merit: 10
|
 |
August 22, 2016, 09:26:04 AM |
|
hello i one question what software use update flash ? i read forum but i dont find  thanx
|
|
|
|
Dum3
Member

Offline
Activity: 75
Merit: 10
|
 |
August 22, 2016, 09:28:39 AM |
|
So if using windows 7 what are the steps in using a custom rom correctly?
|
|
|
|
mikhan
Member

Offline
Activity: 84
Merit: 10
|
 |
August 22, 2016, 12:26:54 PM |
|
if you find patched amd drivers for win7, the procedure is almost the same but where to find?
|
|
|
|
nhando
|
 |
August 22, 2016, 05:56:59 PM |
|
hello i one question what software use update flash ? i read forum but i dont find  thanx atiflash
|
Just "Mining" my own business.
|
|
|
mikhan
Member

Offline
Activity: 84
Merit: 10
|
 |
August 23, 2016, 01:14:03 AM |
|
if you find patched amd drivers for win7, the procedure is almost the same but where to find?
I thought there is no BIOS signature verification for Windows 7. That is just new feature for the Windows 10. There is. Anyway win7 problem is solved too. The same as in win10, but you haven't to enable IGPU or smth else.
|
|
|
|
blue1984
Member

Offline
Activity: 75
Merit: 10
|
 |
August 23, 2016, 10:38:40 AM |
|
is the low energy ROM Flash with all 480 8gb cards possible?
MSI Radeon RX 480, 8GB GDDR5, HDMI, 3x DisplayPort (V803-862R)?
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
 |
August 23, 2016, 12:25:07 PM |
|
There is. Anyway win7 problem is solved too. The same as in win10, but you haven't to enable IGPU or smth else.
Where did you find patched atikmdag.sys for win7? Or does the one for win10 work just fine?
|
|
|
|
Marvell1
Legendary
Offline
Activity: 2688
Merit: 1140
Leading Crypto Sports Betting & Casino Platform
|
 |
August 23, 2016, 04:30:02 PM |
|
is the low energy ROM Flash with all 480 8gb cards possible?
MSI Radeon RX 480, 8GB GDDR5, HDMI, 3x DisplayPort (V803-862R)?
I'm using the low enery Rom on my 8GB cards something is up with this bios or the modded driver though, temps are fine ambient and on the cards max of 75 degrees but the hash rate will go from 28 mhs down to 10 mhs and averages around 24 mhs it obiviously can hit high hash rates but does not seem to stay there when dual mining. Solo mining hash rates stay high.
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
reb0rn21
Legendary
Offline
Activity: 1903
Merit: 1024
|
 |
August 23, 2016, 09:44:07 PM |
|
There is. Anyway win7 problem is solved too. The same as in win10, but you haven't to enable IGPU or smth else.
Where did you find patched atikmdag.sys for win7? Or does the one for win10 work just fine? The atikmdag.sys works on 7,8.1, 10 with no problem, file is same, even on 32 and x64 bit sistems, just use the same driver version for which the file is made
|
|
|
|
Marvell1
Legendary
Offline
Activity: 2688
Merit: 1140
Leading Crypto Sports Betting & Casino Platform
|
 |
August 24, 2016, 12:20:46 AM |
|
There is. Anyway win7 problem is solved too. The same as in win10, but you haven't to enable IGPU or smth else.
Where did you find patched atikmdag.sys for win7? Or does the one for win10 work just fine? The atikmdag.sys works on 7,8.1, 10 with no problem, file is same, even on 32 and x64 bit sistems, just use the same driver version for which the file is made having issues dual mining with these roms both low power and the other one, not tried the boysie one though. Solo mining they work great 30mhs stable dual I can only get 24 mhs and 390 sia pretty much stock numbers so right now I am just solo mining Eth with the modded boxes
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
quocthanh1302
Newbie
Offline
Activity: 2
Merit: 0
|
 |
August 24, 2016, 03:51:34 AM |
|
ok finally got the rom to work, had to do a full re-install of the drivers , copy the modded driver and then boot with option 7
not sure how to get option 7 to auto load on boot.
One issue I'm seeing
dual mining seems quite neutered compared to stock ? at 30 dcri I am seeing 24.5 eth and 360ish sc when before I was getting 23.5 eth and 420 sc
now if I mine eth only I was seeing high hash rates around 31mhs
Also the cards all now detect and 4GB I know others mentioned that as well, it does seem that the core clocks are maxing around 980 which might be the reason for the low SIA or dual mining ?
Try this one Marvell, 29Mh otb, low power usageGreetings thanks Marvell1 and Eliovp! I have HIS rx 480 custom 8gb. Can I to use this room for it? thanks very much.
|
|
|
|
|
Marvell1
Legendary
Offline
Activity: 2688
Merit: 1140
Leading Crypto Sports Betting & Casino Platform
|
 |
August 24, 2016, 05:42:42 AM |
|
ok finally got the rom to work, had to do a full re-install of the drivers , copy the modded driver and then boot with option 7
not sure how to get option 7 to auto load on boot.
One issue I'm seeing
dual mining seems quite neutered compared to stock ? at 30 dcri I am seeing 24.5 eth and 360ish sc when before I was getting 23.5 eth and 420 sc
now if I mine eth only I was seeing high hash rates around 31mhs
Also the cards all now detect and 4GB I know others mentioned that as well, it does seem that the core clocks are maxing around 980 which might be the reason for the low SIA or dual mining ?
Try this one Marvell, 29Mh otb, low power usageGreetings thanks Marvell1 and Eliovp! I have HIS rx 480 custom 8gb. Can I to use this room for it? thanks very much. No need to thank me Eliovp did all the work btw I figured out the why I was getting such a low hash rate dual mining, this ROM is so efficient you have to set a powerlimit of +10 or +20 in claymore or via wattman to force the cards to pull more juice I was using around 3.5 (17 amps at meter then when mining 19amps sometimes 20 is how I got this number) amps for six cards to mine. With the powerlimit set +20 and I see a solid 4 amps maybe sliggtly more for six cards which is still fine since I'm getting the following results : https://forum.ethereum.org/discussion/9090/rx480-reference-custom-rom-31-mh/p11175 or so eth and 2k SC , solo eth was 181 eth and 3.5 amps so its a bit better to lose 6 or so eth to gain 2000 SC or DCR. What I did find is these cards will take as much juice as you can give them so be careful I saw rates as high as 490 SC and 28 Eth
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
Unclegogi
Newbie
Offline
Activity: 44
Merit: 0
|
 |
August 24, 2016, 09:25:49 AM |
|
Eliovp, are you going to publish mod bioses for non-reference RX 480 (like MSI Gaming X)?
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
 |
August 24, 2016, 11:42:43 AM |
|
are you going to publish mod bioses for non-reference RX 480 (like MSI Gaming X)?
In technopowerup review they show it has micron memory. Will oc only with increased vddr votage. And will not oc to 2200 ((
|
|
|
|
Longsnowsm
|
 |
August 24, 2016, 01:43:16 PM |
|
are you going to publish mod bioses for non-reference RX 480 (like MSI Gaming X)?
In technopowerup review they show it has micron memory. Will oc only with increased vddr votage. And will not oc to 2200 (( So at this point we don't know or don't think that the non-reference cards will perform as well?
|
|
|
|
|
|