Swedish ASIC miner company kncminer.com

[FiatKiller]

I ran enablecores on top of FM98 and seems to have fixed WU quite a bit.

Edit: Actually over 300 here and there!

[DPoS]

.98 is 'overclocking' a small amount which was expected

check the VRM amps and you will see 5-8% more amps out  (from 40 --> 43.2, etc)

if anyone wants to run bfgminer on .98 let us know if most cores are running over 750 now



also, 8 VRM boards go up only a little, so not clear how much hashing increase unless I run bfgminer and look at everything core by core

[dwdoc]

I feel like we're in a tug-of-war between firmware updates and rising difficulty and difficulty is winning. 

[AussieHash]

My "bad" jupiter which has gone from fw 095 > 096 > 097 > 0961 > 097 > 095 ---> 098

has improved by 100GH/s at the pool.  The previous 24hr average was around 450-460GH

Currently pool reports hashing at 550GH.

Code:

 cgminer version 3.6.6 - Started: [2013-10-29 15:32:49]
--------------------------------------------------------------------------------
 (5s):608.1G (avg):564.2Gh/s | A:389044  R:2518  HW:7761  WU:7825.6/m
 ST: 2  SS: 1  NB: 6  LW: 407116  GF: 0  RF: 0
 Connected to redacted diff 350 with stratum as user redacted
 Block: 0003c369b32684e8...  Diff:391M  Started: [16:02:20]  Best share: 1.56M
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 KnC 0:                | 574.7G/565.2Gh/s | A:389394 R:2518 HW:7773 WU: 7834.4/m
--------------------------------------------------------------------------------

[chrono030]

wow, also just noticed that after around 115 Million submitted shares I can finally say I am official and found a BLOCK for the BTC community. I was starting to feel left out....1 less on the bucket list.

I saw that on bitminter - Congrats man!

[ASIC-K]

stupid question, but i just switched to eligius, where can i see if i have solved a block or not? lol

[reactor]

I feel like we're in a tug-of-war between firmware updates and rising difficulty and difficulty is winning. 

Difficulty is always winning.   At any estimate I've seen the KNC October shipment basically made the KNC October shipment recipients in for a heap of pain, even when running under spec.

[vesperwillow]

wow, also just noticed that after around 115 Million submitted shares I can finally say I am official and found a BLOCK for the BTC community. I was starting to feel left out....1 less on the bucket list.

Solo mining or pool?

[Phonikg]

.98 firmware helped! hashing at 144 ghs on my mercury. low hardware errors!

Congrats ASIC-K!!  I have been hesitant to play with my firmware at all, as my miner arrived with .95 and was hashing 540gh/s in cgminer right off the bat.

Of course now I want to apply .98 but I am out of town for work (Windsor) and do not want to attempt a remote fw upgrade:(

Have to wait till the weekend... Cheers!

[ASIC-K]

.98 firmware helped! hashing at 144 ghs on my mercury. low hardware errors!

Congrats ASIC-K!!  I have been hesitant to play with my firmware at all, as my miner arrived with .95 and was hashing 540gh/s in cgminer right off the bat.

Of course now I want to apply .98 but I am out of town for work (Windsor) and do not want to attempt a remote fw upgrade:(

Have to wait till the weekend... Cheers!

hey buddy! i forgot about you, we still have to do a meet up!

yeah man, .98 solved almost all problems. mercury is running at peak efficiency now, i honestly think you would get a bump in speed too.

[sbfree]

wow, also just noticed that after around 115 Million submitted shares I can finally say I am official and found a BLOCK for the BTC community. I was starting to feel left out....1 less on the bucket list.

Solo mining or pool?

Would be a losing battle if I was solo mining. I started on bitminter but most of my mining has been on BTC Guild.

[sbfree]

Please post any changes in WU, that is really all that matters because that is what we are paid for.

After 1hr on .98

errors would immediately start in the 20% range and average down to about 16% but with .98 I am currently at around 7% HW error and most importantly on BTCG

miner_knc   273.96 GH/s   54,336k (99.83%)

I have never seen it this high......will post more later.

[The Avenger]

Does anyone know if my miners have been collected/shipped today or yesterday?

Sorry Cyper, they are bs-ing you if they said this meant it was shipped. I had the same situation. Shipping info recieved only means dhl have been informed. Tomorrow you will get the "Shipment picked up" in the morning. Then the day after it should be delivered. So prob it will arrive on the 31st

[lindeanin]

stupid question, but i just switched to eligius, where can i see if i have solved a block or not? lol

Not all pools show it. I know Slush does, as I found one already half year ago in 1st day of mining  

[dwdoc]

Going from 0.97 to 0.98
One Jupiter went from 420 to 580GH
One went from 500 to 550
And one stayed at 500
 

[ASIC-K]

stupid question, but i just switched to eligius, where can i see if i have solved a block or not? lol

Not all pools show it. I know Slush does, as I found one already half year ago in 1st day of mining  

ok thanks!

[xyzzy099]

stupid question, but i just switched to eligius, where can i see if i have solved a block or not? lol

http://eligius.st/~wizkid057/newstats/blocks.php

[Phoenix1969]

0.98 Caused one of my GUI interfaces to report 0 gh/s, when cgminer is going fine, and the pool is reporting it fine....?  anyone else?
cold restart fixed it...   

[semaster]

[naRky]

went from 0.95 to 0.98

0.95
545GH/s
570W
1.9% HW error

0.98 running 1h
565GH/s
630W
2% HW error