Swedish ASIC miner company kncminer.com

[CYPER]

So all I need is some of these + the pins + a crimp tool (why is it so expensive?)

You don't need a high dollar AMP crimping tool.
Many auto parts stores have inexpensive crimp kits for the tool, and might even have terminals that will work.

Your parts lookup skills are commendable.

I don't know if it is in your comfort zone but you could open the PSU and solder in a jumper.

Cleanest look obtainable.

YMMV

I don't want to mess up the warranty, so that's why I want to just attach a connector.
Also I think I can attach the terminal to the cable with just some basic pliers and, no special crimp tools is required, but nevertheless it is a good tool to have.
Do you know if any of these is for terminals: http://dx.com/s/crimp+tool

[Biomech]

Check this one http://uk.farnell.com/te-connectivity-amp/1-794617-0/receptacle-dual-row-10way/dp/1111091
Be careful though the cut outs are often different you need to check if the corners match on the plug and socket.

So I made some additional research (used the online chat on the site you gave me) and was told this is the right connector:
http://uk.mouser.com/ProductDetail/Molex/39-01-2100/?qs=sGAEpiMZZMtVoztFdqDXO6IgqogZDQiJ
or this one
http://uk.mouser.com/ProductDetail/Molex/39-01-2105/?qs=%2fha2pyFaduihxjzDOr1tv20yexU0RnWqYViKyHkA%2fEw%3d
More information here: http://uk.mouser.com/catalog/English/102/GBP/1388.pdf

So all I need is some of these + the pins + a crimp tool (why is it so expensive?)

Here's a link on Amazon, but these are walmart items in the US. I would think you can find something similar for cheap in the UK. The more expensive ones are professional tools, made to stand up to the abuse of a pissed off electrician. Thus expensive. The cheapo hobby ones work just fine, except that under daily constant use they'll wear out fast. (My father is an electrician. There is a significant difference in strength between his Klein crimping tool and my POS like the link below. Both do the job.)

http://www.amazon.com/Neiko-Solderless-Terminal-Connection-Stripper/dp/B000K7GRCI/ref=sr_1_6?ie=UTF8&qid=1385144210&sr=8-6&keywords=electrical+crimping+tool

[Phoenix1969]

OMG...
http://www.ebay.com/sch/i.html?_odkw=knc&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.Xkncminer&_nkw=kncminer&_sacat=0

[Bitcoinorama]

OMG...
http://www.ebay.com/sch/i.html?_odkw=knc&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.Xkncminer&_nkw=kncminer&_sacat=0

Tempted?

[Phoenix1969]

OMG...
http://www.ebay.com/sch/i.html?_odkw=knc&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.Xkncminer&_nkw=kncminer&_sacat=0

Tempted?

Was just curious.....
actually, I was thinking of offering 2BTC for any unwanted upgrade cards out there....  plus shipping....
but looking at that...I'd probably get laughed at.....
anyone still feel they got overcharged for the boards?....LOL!

[vesperwillow]

OMG...
http://www.ebay.com/sch/i.html?_odkw=knc&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.Xkncminer&_nkw=kncminer&_sacat=0

Tempted?

Was just curious.....
actually, I was thinking of offering 2BTC for any unwanted upgrade cards out there....  plus shipping....
but looking at that...I'd probably get laughed at.....

<-- Looking for upgrade cards for a Mercury.. lol

Yeah, I keep an eye on the ebay circuit. Did you see the November units which were going for $27-$34k today? Hahaha!

Talk about quick turnaround.

[Phoenix1969]

OMG...
http://www.ebay.com/sch/i.html?_odkw=knc&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.Xkncminer&_nkw=kncminer&_sacat=0

Tempted?

Was just curious.....
actually, I was thinking of offering 2BTC for any unwanted upgrade cards out there....  plus shipping....
but looking at that...I'd probably get laughed at.....

<-- Looking for upgrade cards for a Mercury.. lol

Yeah, I keep an eye on the ebay circuit. Did you see the November units which were going for $27-$34k today? Hahaha!

Talk about quick turnaround.

Yeah! That's so crazy!
I'd like to choke the life out of those scalpers.... !  (just kidding)

[volosator]

Can anybody sell me a controller board for October 2013 shipment unit?
Please PM me if you have one for sale!

[CYPER]

Check this one http://uk.farnell.com/te-connectivity-amp/1-794617-0/receptacle-dual-row-10way/dp/1111091
Be careful though the cut outs are often different you need to check if the corners match on the plug and socket.

So I made some additional research (used the online chat on the site you gave me) and was told this is the right connector:
http://uk.mouser.com/ProductDetail/Molex/39-01-2100/?qs=sGAEpiMZZMtVoztFdqDXO6IgqogZDQiJ
or this one
http://uk.mouser.com/ProductDetail/Molex/39-01-2105/?qs=%2fha2pyFaduihxjzDOr1tv20yexU0RnWqYViKyHkA%2fEw%3d
More information here: http://uk.mouser.com/catalog/English/102/GBP/1388.pdf

So all I need is some of these + the pins + a crimp tool (why is it so expensive?)

Here's a link on Amazon, but these are walmart items in the US. I would think you can find something similar for cheap in the UK. The more expensive ones are professional tools, made to stand up to the abuse of a pissed off electrician. Thus expensive. The cheapo hobby ones work just fine, except that under daily constant use they'll wear out fast. (My father is an electrician. There is a significant difference in strength between his Klein crimping tool and my POS like the link below. Both do the job.)

http://www.amazon.com/Neiko-Solderless-Terminal-Connection-Stripper/dp/B000K7GRCI/ref=sr_1_6?ie=UTF8&qid=1385144210&sr=8-6&keywords=electrical+crimping+tool

I have that exact same tool left over by e friend. Never knew it can crimp molex terminals. Which part of it do you use?

[monsieur]

After inhaling some lead vapor from soldering and scare due to scary red light, my newly-born five-headed monkey finally eats current and shits bitcoins.

[Biomech]

Check this one http://uk.farnell.com/te-connectivity-amp/1-794617-0/receptacle-dual-row-10way/dp/1111091
Be careful though the cut outs are often different you need to check if the corners match on the plug and socket.

So I made some additional research (used the online chat on the site you gave me) and was told this is the right connector:
http://uk.mouser.com/ProductDetail/Molex/39-01-2100/?qs=sGAEpiMZZMtVoztFdqDXO6IgqogZDQiJ
or this one
http://uk.mouser.com/ProductDetail/Molex/39-01-2105/?qs=%2fha2pyFaduihxjzDOr1tv20yexU0RnWqYViKyHkA%2fEw%3d
More information here: http://uk.mouser.com/catalog/English/102/GBP/1388.pdf

So all I need is some of these + the pins + a crimp tool (why is it so expensive?)

Here's a link on Amazon, but these are walmart items in the US. I would think you can find something similar for cheap in the UK. The more expensive ones are professional tools, made to stand up to the abuse of a pissed off electrician. Thus expensive. The cheapo hobby ones work just fine, except that under daily constant use they'll wear out fast. (My father is an electrician. There is a significant difference in strength between his Klein crimping tool and my POS like the link below. Both do the job.)

http://www.amazon.com/Neiko-Solderless-Terminal-Connection-Stripper/dp/B000K7GRCI/ref=sr_1_6?ie=UTF8&qid=1385144210&sr=8-6&keywords=electrical+crimping+tool

I have that exact same tool left over by e friend. Never knew it can crimp molex terminals. Which part of it do you use?

My bad. I thought you were looking for one for the little terminals in the post I first replied to. Molex requires a different tool, and probably more expensive. Or you could solder the wires to the terminals, which is what I've done in the past. Picky, but not terribly difficult.

[Bogart]

I've been offering 3 BTC for someone's unwanted module, but so far no takers.

I've got one unused connector that's begging to be filled.

[CYPER]

My bad. I thought you were looking for one for the little terminals in the post I first replied to. Molex requires a different tool, and probably more expensive. Or you could solder the wires to the terminals, which is what I've done in the past. Picky, but not terribly difficult.

https://bitcointalk.org/index.php?topic=170332.msg3677163#msg3677163

So then any of these: http://dx.com/s/crimp+tool

[Bogart]

I'm sure solder or an imperfect crimp will suffice.  It's not like this jumper will be carrying much current at all.

[fubly]

OMG...
http://www.ebay.com/sch/i.html?_odkw=knc&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.Xkncminer&_nkw=kncminer&_sacat=0

Tempted?

Was just curious.....
actually, I was thinking of offering 2BTC for any unwanted upgrade cards out there....  plus shipping....
but looking at that...I'd probably get laughed at.....
anyone still feel they got overcharged for the boards?....LOL!

Have a crazy look to this:

http://www.ebay.de/itm/261326710136?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

[FiatKiller]

FW 0.9.9 is working best for me so far: (and no heatsink fans not causing any problems after 3-4 weeks)

[volosator]

eBay

In case you want an extra module.

[puffer]

http://forum.kncminer.com/forum/resellers-affilicates/general-questions/18155-change-of-status-for-my-order-saturn-november

[ASIC-K]

eBay

In case you want an extra module.

200 shipping?! dude...

[Cablez]

I'm sure solder or an imperfect crimp will suffice.  It's not like this jumper will be carrying much current at all.

^^^This.

If your are going to splash for the crimper, it is this one I believe: http://dx.com/p/lodestar-l214192-terminals-ratchet-crimping-tool-yellow-black-250405