DiabloMiner GPU Miner

[DiabloD3]

my graphics card is a ATI Radeon HD 4850

as for the driver, i downloaded AMDs auto detect,
witch gave me "13-1-legacy_vista_win7_win8_64_dd_ccc.exe"

I believe they disabled OpenCL on Radeon 4000 series because it is incomplete and a tad loopy.

It doesn't really matter however, Radeon 4000 series is too slow to profitably mine with, and faster GPUs are slowly being priced out of market as well.

[1714296495]

1714296495

[1714296495]

1714296495

[1714296495]

1714296495

[lordfawful13]

ok, thanks for the help.

[peloso]

is diablominer support scrypt  ? (for minig litecoin, novacoin and other scrypt forks ) if yes pliase tell how if not please tell when it will be or planing in the future?

thanks

[DiabloD3]

is diablominer support scrypt  ? (for minig litecoin, novacoin and other scrypt forks ) if yes pliase tell how if not please tell when it will be or planing in the future?

thanks

No. Use cgminer instead.

[ElPibeDeLosAstilleros]

Hello, im very sorry to ask this, what i guess is very basic, but i searched, on this forum, specifically on this post too... trying to look any similar problems, and i didnt found anything, im pretty sure im not doing it completly right, but i spent some hours and im starting to fell frustrated.
So here is the problem i have:

Code:

[09/10/13 12:44:38] Started

[09/10/13 12:44:38] Connecting to: http://pit.deepbit.net:8332/

[09/10/13 12:44:38] ERROR: No OpenCL platforms found
DiabloMiner: An error occurred while starting the application.

So with my basic knowledge i think is all about the drivers on my GPU,

I installed the newest drivers for my GeForce 6150SE nForce 430. Is this board compatible with openCL?
I should configure any settings? use other command on the command lines?
or should I forget about GPU minning with this board and directly try CPU minning?

[DiabloD3]

Hello, im very sorry to ask this, what i guess is very basic, but i searched, on this forum, specifically on this post too... trying to look any similar problems, and i didnt found anything, im pretty sure im not doing it completly right, but i spent some hours and im starting to fell frustrated.
So here is the problem i have:

Code:

[09/10/13 12:44:38] Started

[09/10/13 12:44:38] Connecting to: http://pit.deepbit.net:8332/

[09/10/13 12:44:38] ERROR: No OpenCL platforms found
DiabloMiner: An error occurred while starting the application.

So with my basic knowledge i think is all about the drivers on my GPU,

I installed the newest drivers for my GeForce 6150SE nForce 430. Is this board compatible with openCL?
I should configure any settings? use other command on the command lines?
or should I forget about GPU minning with this board and directly try CPU minning?

Your GPU is too old to support OpenCL.

[ElPibeDeLosAstilleros]

Hello, im very sorry to ask this, what i guess is very basic, but i searched, on this forum, specifically on this post too... trying to look any similar problems, and i didnt found anything, im pretty sure im not doing it completly right, but i spent some hours and im starting to fell frustrated.
So here is the problem i have:

Code:

[09/10/13 12:44:38] Started

[09/10/13 12:44:38] Connecting to: http://pit.deepbit.net:8332/

[09/10/13 12:44:38] ERROR: No OpenCL platforms found
DiabloMiner: An error occurred while starting the application.

So with my basic knowledge i think is all about the drivers on my GPU,

I installed the newest drivers for my GeForce 6150SE nForce 430. Is this board compatible with openCL?
I should configure any settings? use other command on the command lines?
or should I forget about GPU minning with this board and directly try CPU minning?

Your GPU is too old to support OpenCL.

so... i should give up on gpu mining, at least on the PCs with that GPU, thanks

[DiabloD3]

Hello, im very sorry to ask this, what i guess is very basic, but i searched, on this forum, specifically on this post too... trying to look any similar problems, and i didnt found anything, im pretty sure im not doing it completly right, but i spent some hours and im starting to fell frustrated.
So here is the problem i have:

Code:

[09/10/13 12:44:38] Started

[09/10/13 12:44:38] Connecting to: http://pit.deepbit.net:8332/

[09/10/13 12:44:38] ERROR: No OpenCL platforms found
DiabloMiner: An error occurred while starting the application.

So with my basic knowledge i think is all about the drivers on my GPU,

I installed the newest drivers for my GeForce 6150SE nForce 430. Is this board compatible with openCL?
I should configure any settings? use other command on the command lines?
or should I forget about GPU minning with this board and directly try CPU minning?

Your GPU is too old to support OpenCL.

so... i should give up on gpu mining, at least on the PCs with that GPU, thanks

Do to how high difficulty is now, no GPU is profitable anymore.

[iiWii]

can anyone help me out, I am getting HW error and noting is getting accepted. Everything used to work a few months ago then I stopped mining and now I'm trying to get it stated again.
Mobo: Asus p8z68-v pro
Ram: Corsair 4gb
HD: 32gb
Video Card: radeon 5970(sapphire and xfx)
powersupply: Coolmasters 1300w
OS: Ubuntu 12.04(64bit)

Code:

[12/4/13 1:24:25 PM] Started    									 
[12/4/13 1:24:25 PM] Connecting to: http://x.x.x.x:xxxx/       					 
[12/4/13 1:24:25 PM] Using AMD Accelerated Parallel Processing OpenCL 1.2 AMD-APP (1124.2)      	 
[12/4/13 1:24:29 PM] BFI_INT patching enabled, disabling hardware check errors  			 
[12/4/13 1:24:29 PM] Added Cypress (#1) (20 CU, local work size of 256) 				 
[12/4/13 1:24:29 PM] DEBUG: 10.0.1.3: Enabling long poll support					 
[12/4/13 1:24:29 PM] DEBUG: 10.0.1.3: Enabling roll ntime support, expire after 60 seconds      	 
[12/4/13 1:24:30 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring     			 
[12/4/13 1:24:33 PM] BFI_INT patching enabled, disabling hardware check errors  			 
[12/4/13 1:24:33 PM] Added Cypress (#2) (20 CU, local work size of 256) 				 
[12/4/13 1:24:35 PM] DEBUG: Invalid solution 1 from Cypress (#2)/1, possible driver or hardware issue    
[12/4/13 1:24:36 PM] BFI_INT patching enabled, disabling hardware check errors  			 
[12/4/13 1:24:36 PM] Added Cypress (#3) (20 CU, local work size of 256) 				 
[12/4/13 1:24:39 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring     			 
[12/4/13 1:24:40 PM] BFI_INT patching enabled, disabling hardware check errors  			 
[12/4/13 1:24:40 PM] Added Cypress (#4) (20 CU, local work size of 256) 				 
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring     			 
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring     			 
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring     			 
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring     			 
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring     			 
[12/4/13 1:24:40 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring     			 
[12/4/13 1:24:42 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring     			 
[12/4/13 1:24:43 PM] DEBUG: Spurious CL_INVALID_KERNEL_ARGS error, ignoring     			 
[12/4/13 1:24:44 PM] DEBUG: Invalid solution 2 from Cypress (#2)/1, possible driver or hardware issue    
[12/4/13 1:24:48 PM] DEBUG: Invalid solution 3 from Cypress (#1)/1, possible driver or hardware issue    
[12/4/13 1:24:49 PM] DEBUG: Invalid solution 4 from Cypress (#3)/0, possible driver or hardware issue    
[12/4/13 1:24:59 PM] DEBUG: Cypress (#1)/0: Refresh work: range expired 				 
[12/4/13 1:24:59 PM] DEBUG: Cypress (#1)/1: Refresh work: range expired 				 
mh: 1194.7/836.4 | a/r/hwe: 0/0/4 | gh: 8.6 7.7 6.7 5.7 | fps: 62.0^C

I installed amd drivers following these direction:
http://wiki.cchtml.com/index.php/Ubuntu_Raring_Installation_Guide

I installed java following these directions:
http://www.blogs.digitalworlds.net/softwarenotes/?p=41

I got diablo miner from this site:
https://en.bitcoin.it/wiki/DiabloMiner

and I am using Slush's pool with Stratum mining proxy

I don't think I'm missing anything, but if I am please let me know, any suggestions and help would be appreciated.

[DiabloD3]

DiabloMiner has been discontinued, please use cgminer instead

[iiWii]

DiabloMiner has been discontinued, please use cgminer instead

noo say it isn't so.
Thank you for the time and effort you put into your software, it was the first miner software I used and it was simple.
I will look into cgminer,  thanks again.

[DiabloD3]

DiabloMiner has been discontinued, please use cgminer instead

noo say it isn't so.
Thank you for the time and effort you put into your software, it was the first miner software I used and it was simple.
I will look into cgminer,  thanks again.

FGPA/ASIC support is just too difficult to manage in a cross platform way in Java.

cgminer was written by a good friend of mine who I introduced to Bitcoin, and I myself have switched over to cgminer. The DM kernel is available through cgminer as well, so its not a hard choice if you're still GPU mining.

[organofcorti]

DiabloMiner has been discontinued, please use cgminer instead

Thanks for all your work on DiabloMiner -  it was the first real miner I used.

[hashbox247]

I have a look, thx

[ibminer]

DiabloMiner has been discontinued, please use cgminer instead

Thanks for all your work on DiabloMiner -  it was the first real miner I used.

Diablo was my first as well... thank you for all of your hard work on this DiabloD3!

[Hueristic]

IS there a setup DIY for windows?

I can't find a thing about setting up a config file, Only command line.

Is it faster than Cgminer (with the - k diakgcn flag)?

[Lassi_miner]

some performance difference between sgminer end diaboloMiner?

[addictminer]

Does it work with NVIDIA GTX 780 graphics card?

[Joshwaa]

This project has been closed.  I would suggest CUDAminer.

[LIN ZHAO]

你好好机