[1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool

[sEpuLchEr]

And... a block!

[1714137632]

1714137632

[1714137632]

1714137632

[1714137632]

1714137632

[Chupacabras]

And... a block!

Where?

[mahrens917]

A new german P2Pool Node was born. The Node has 16 GB RAM, 8 x 2,8 Xeon CPU Power an 1Gbit/s connection. 0% Fee for ever.

direct to Node: http://bitcoin.web-rss-verzeichnis.de:9332/static/
to the Intropage: http://bitcoin.web-rss-verzeichnis.de

bitcoin.web-rss-verzeichnis.de:9332/local_stats/ Provides "---ERROR---" and no stats....

[Duce]

And... a block!

Where?

That was from two days ago before the Bitcointalk hard drive problem, please see the date of posting.

[minerpool-de]

bitcoin.web-rss-verzeichnis.de:9332/local_stats/ Provides "---ERROR---" and no stats....

Use the normal links:
direct to Node: http://bitcoin.web-rss-verzeichnis.de:9332/static/
to the Intropage: http://bitcoin.web-rss-verzeichnis.de

[nreal]

Really hard to find a better pool than P2POOL, it lags and some poor equipment doesnt work with it but then in the end those broken s4:s doesnt work anywhere else either 

All I ask is someone to make the tool for donation, so we can donate who ever we will --donante % --addres

I dont think Forrest is against it, because it seems he has better plans than P2pool at the moment? If im wrong then im wrong. Just hope that P2pool can grow up a cow.

[ksenter]

I wrote a widget called p2poolwidget for android a while back.  I think if you search for p2pool in the google play store it's still the only relevant app you'll find, sadly.  Anyway, I wrote it back when I was mining, which I haven't been doing in a long time, just so I could monitor my setup.  I was trying to learn android programming at the time, so the code is pretty sloppy.  I'd planned to try to improve it over time, but then mining on p2pool started becoming less and less rewarding and mining in general became unprofitable for me soon after, and I just lost interest basically.

So, I haven't made any updates in quite a while.  Then someone emailed me a few weeks ago asking for some changes, and I told them I didn't really have time, and they asked if I would consider open sourcing it.  So I put it up on github a couple of weeks ago.  I was going to wait until they confirmed they were able to get the code to compile, but I'm pretty sure it's all there (if not, sorry, it's first time using github).  So, basically I thought I'd mention it here in case any one in this thread wants to make their own changes.  You should be able to get to it here: https://github.com/ksenter/P2PoolWidget

If you want to release your own version, just give me credit for any of the code, or ideas, of mine that you keep.  Other than that, have at it.  Good luck!

[Chupacabras]

what will be the best configuration for getting more shares?
Im running at 5.6 Th. but i only get 4 to 5 shares a day. my pay rate is at 0.035

the user name on the miners i have them with /2000..
Miners that i have S1,S2,S3,S4
My node is running on Win2k8

Thanks.

[mdude77]

what will be the best configuration for getting more shares?
Im running at 5.6 Th. but i only get 4 to 5 shares a day. my pay rate is at 0.035

the user name on the miners i have them with /2000..
Miners that i have S1,S2,S3,S4
My node is running on Win2k8

Thanks.

Set them all to use queue size of 1.  The easiest way to do that, but it's not permanent, is to SSH into them and enter:

/usr/bin/cgminer-api "setconfig|queue,1"

That will be lost when the miner reboots or you change your pool config via the UI.

M

[Chupacabras]

what will be the best configuration for getting more shares?
Im running at 5.6 Th. but i only get 4 to 5 shares a day. my pay rate is at 0.035

the user name on the miners i have them with /2000..
Miners that i have S1,S2,S3,S4
My node is running on Win2k8

Thanks.

Set them all to use queue size of 1.  The easiest way to do that, but it's not permanent, is to SSH into them and enter:

/usr/bin/cgminer-api "setconfig|queue,1"

That will be lost when the miner reboots or you change your pool config via the UI.

M

I ran it. is this right?


alias: -l not found
root@antMiner11:~# /usr/bin/cgminer-api "setconfig|queue,1"
Reply was 'STATUS=E,When=1422193688,Code=45,Msg=Access denied to 'setconfig' command,Description=cgminer 4.7.0|'
[STATUS] =>
(
   [STATUS] => E
   [When] => 1422193688
  

Code:

 => 45
   [Msg] => Access denied to 'setconfig' command
   [Description] => cgminer 4.7.0

[/quote]

[mdude77]

I ran it. is this right?


alias: -l not found
root@antMiner11:~# /usr/bin/cgminer-api "setconfig|queue,1"
Reply was 'STATUS=E,When=1422193688,Code=45,Msg=Access denied to 'setconfig' command,Description=cgminer 4.7.0|'
[STATUS] =>
(
   [STATUS] => E
   [When] => 1422193688
  

Code:

 => 45
   [Msg] => Access denied to 'setconfig' command
   [Description] => cgminer 4.7.0

Yes and no.

S1s and S3s are finicky about this.  S2s and S4s should accept the command without a problem.

I don't remember how to get S1s and S3s changed.  Maybe someone else can chime in?

M

[yslyung]

I ran it. is this right?


alias: -l not found
root@antMiner11:~# /usr/bin/cgminer-api "setconfig|queue,1"
Reply was 'STATUS=E,When=1422193688,Code=45,Msg=Access denied to 'setconfig' command,Description=cgminer 4.7.0|'
[STATUS] =>
(
   [STATUS] => E
   [When] => 1422193688
   

Code:

 => 45
   [Msg] => Access denied to 'setconfig' command
   [Description] => cgminer 4.7.0

Yes and no.

S1s and S3s are finicky about this.  S2s and S4s should accept the command without a problem.

I don't remember how to get S1s and S3s changed.  Maybe someone else can chime in?

M

try this once ssh'ed in then just paste, exit then reboot miner

sed -i 's/--queue 4096"/--queue 0 --scan-time 1 --expiry 1"/g' /etc/init.d/cgminer

[yslyung]

what will be the best configuration for getting more shares?
Im running at 5.6 Th. but i only get 4 to 5 shares a day. my pay rate is at 0.035

the user name on the miners i have them with /2000..
Miners that i have S1,S2,S3,S4
My node is running on Win2k8

Thanks.

why /2000 ? min share diff now is roughly 7-9 million +

maybe posting your config/setup might help

try to optimize your pool by :

having a good internet connection, make sure ports are opened, etc

enough memory/cpu to run the pool ? a SSD perhaps ?

+1 on the setting of queue on the ants

how's the latency ? bitcoin.conf can be edited to helpout a little

how abt the local DOA's & stale rate & Valid/Orphans/Dead shares doing ?

Efficiency 100% & above ?

also a little luck is needed too

more info prolly more answers.

don't mean to be an a*s but by just asking plainly for help there ain't gonna be much answers.

now can we hit some blocks grrrrrrr Super Dry yaiks !

[Chupacabras]

what will be the best configuration for getting more shares?
Im running at 5.6 Th. but i only get 4 to 5 shares a day. my pay rate is at 0.035

the user name on the miners i have them with /2000..
Miners that i have S1,S2,S3,S4
My node is running on Win2k8

Thanks.

why /2000 ? min share diff now is roughly 7-9 million +

maybe posting your config/setup might help

try to optimize your pool by :

having a good internet connection, make sure ports are opened, etc

enough memory/cpu to run the pool ? a SSD perhaps ?

+1 on the setting of queue on the ants

how's the latency ? bitcoin.conf can be edited to helpout a little

how abt the local DOA's & stale rate & Valid/Orphans/Dead shares doing ?

Efficiency 100% & above ?

also a little luck is needed too

more info prolly more answers.

don't mean to be an a*s but by just asking plainly for help there ain't gonna be much answers.

now can we hit some blocks grrrrrrr Super Dry yaiks !

this is what i have in bitcoin.cof

rpcuser = bitcoin
rpcpassword = 1N3misrwjkelr;qlejkwr;qlkwejrq;kl
server = 1
blockmaxsize = 500000
mintxfee = 0.000001
minrelaytxfee = 0.000001
maxconnections = 125

also do you mean that i should have 7000 or 9000 instead of 2000?

[MissouriMiner]

I ran it. is this right?


alias: -l not found
root@antMiner11:~# /usr/bin/cgminer-api "setconfig|queue,1"
Reply was 'STATUS=E,When=1422193688,Code=45,Msg=Access denied to 'setconfig' command,Description=cgminer 4.7.0|'
[STATUS] =>
(
   [STATUS] => E
   [When] => 1422193688
  

Code:

 => 45
   [Msg] => Access denied to 'setconfig' command
   [Description] => cgminer 4.7.0

Yes and no.

S1s and S3s are finicky about this.  S2s and S4s should accept the command without a problem.

I don't remember how to get S1s and S3s changed.  Maybe someone else can chime in?

M

With S3's, edits to /etc/init.d/cgminer are saved over power cycle, unlike the S2/S4/C1/S5.  So you can simply add your config changes to the "PARAM=" line, such as api-allow, queue, etc...   

With the S5, there is a new file named /config/user_settings.  The only variable it accepts is queue (so far).   For some reason, I have to go to Miner Configuration in the Web UI and Save again for the changes to save past reboot.  I assume a bug.

[yslyung]

what will be the best configuration for getting more shares?
Im running at 5.6 Th. but i only get 4 to 5 shares a day. my pay rate is at 0.035

the user name on the miners i have them with /2000..
Miners that i have S1,S2,S3,S4
My node is running on Win2k8

Thanks.

why /2000 ? min share diff now is roughly 7-9 million +

maybe posting your config/setup might help

try to optimize your pool by :

having a good internet connection, make sure ports are opened, etc

enough memory/cpu to run the pool ? a SSD perhaps ?

+1 on the setting of queue on the ants

how's the latency ? bitcoin.conf can be edited to helpout a little

how abt the local DOA's & stale rate & Valid/Orphans/Dead shares doing ?

Efficiency 100% & above ?

also a little luck is needed too

more info prolly more answers.

don't mean to be an a*s but by just asking plainly for help there ain't gonna be much answers.

now can we hit some blocks grrrrrrr Super Dry yaiks !

this is what i have in bitcoin.cof

rpcuser = bitcoin
rpcpassword = 1N3misrwjkelr;qlejkwr;qlkwejrq;kl
server = 1
blockmaxsize = 500000
mintxfee = 0.000001
minrelaytxfee = 0.000001
maxconnections = 125

also do you mean that i should have 7000 or 9000 instead of 2000?

default blockmaxsize is already 750000 try that & see or you can go max to 1000000

try raising both tx & relay fee to 0.00001

again max conn is 125 default, you can increase, leave it at default or lower it if you've got connection/bandwidth limitations (if there are limitations, i wont suggest running a pool or maybe you can upgrade it)

the share diff changes all the time, either you can set min diff or slightly above, if it's above it will use the higher but not the lower you've set

happy mining.

tbh, if you're not sure what does those commands do, best is to leave it at defaults. ain't broken don't fix it as the old saying goes but no harm trying.

[sEpuLchEr]

Aiyeee... agree on super dry... it's mega dry....

Need... blocks... help... 

 

[sEpuLchEr]

tbh, if you're not sure what does those commands do, best is to leave it at defaults. ain't broken don't fix it as the old saying goes but no harm trying.

Yes. Best not to set anything and leave them at the defaults if you do not know what they do, or you'll end up much worst. Start with minimum in the conf or for p2pool, let it run a few days and you can fine tune later when you're more comfortable. Also, when you do make changes, let it run a few days after any changes to better gauge the performance increase/decrease.

Edit: And there is really no need to set diff for your miners. P2Pool does an ok (not excellent) vardiff job.

[sEpuLchEr]

Finally!!!!! A block.. man.. that was long

[yslyung]

Finally!!!!! A block.. man.. that was long

NOT enuff ! want MOARRR Need moar hashPOWAHHH c'mon boys let's beat the crap out of other pools