thaelin
Newbie
Offline
Activity: 64
Merit: 0
|
|
December 18, 2017, 07:49:21 AM |
|
@cryptatome
OK papmp, got the time stamp going but had to put the change into the WTM check and not auto switch as it is off. I am only wanting at this time to see what coins are bobbing to the top and for how long and what kind of frequency that they will have. Years ago I did an AI program for the stock market and it did quite well for a long time until they found out I had it running and changed the game. Then "08 came and wiped out all I did. I see patterns and that is what I am looking for here as well. Once I have a sufficient data set to work with, I will be able to predict which will be the best to run... I hope..
Crypto as soon as I get the thing soused out I will be glad to pass on to you. It will be a simple form of which you will extract the data comma delimited and import to excel like pgm.
You will have to extend the size of the log file for What to min check so you can capture a large amount of data
|
|
|
|
thaelin
Newbie
Offline
Activity: 64
Merit: 0
|
|
December 18, 2017, 07:53:20 AM |
|
I did find out what my restart problem was. I have a GPU that is falling out now and then. It seems to have a different style of ram in it than the others and is a bit slower. So the WatchDog says you had a GPU fall out and I am re-starting the 3main which brings it back for whatever time until it does it again. Limits my down time on the tester and so is working great.
thanks again thay
Hope my comments are helpful and not a hinderence. I do seem to come across the wrong way some times.
|
|
|
|
WaveFront
Member
Offline
Activity: 126
Merit: 10
|
|
December 18, 2017, 09:46:02 AM |
|
Hello, in the PAPAMPI WTM_AUTO_SWITCH settings, what is the exact role of the setting:
WTM_AUTO_SWITCH_SYNC_INTERVAL="3"
I suppose the units here are minutes.
Cheers
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 18, 2017, 10:04:32 AM |
|
Hello, in the PAPAMPI WTM_AUTO_SWITCH settings, what is the exact role of the setting:
WTM_AUTO_SWITCH_SYNC_INTERVAL="3"
I suppose the units here are minutes.
Cheers
That's the time in minutes between syncing and getting coins profitability data from whattomine.com
|
|
|
|
chem1990
Newbie
Offline
Activity: 12
Merit: 0
|
|
December 18, 2017, 11:34:57 AM |
|
Hello everyone.
I want just to say thanks to anyone who makes our lives easier with this great distro...
I noticed a problem/bug with the community build. it was working great on ast Fullzero release 1.4 and i'm talking about wi-fi networking. Yes i'm using one rig with wi fi for obvious resons, and it was working great (tp-link 722n - chipset rtl8801eu), but since i made the update to community build the wi fi after every restart just hangs, stops working. usb stick isnt recognized. if i take it out of usb and reconnect everything starts working.
any idea what could be or what to do. can anyone take a look. maybe some boot priority for usb drivers?
thx
|
|
|
|
WaveFront
Member
Offline
Activity: 126
Merit: 10
|
|
December 18, 2017, 12:22:52 PM |
|
Hello, in the PAPAMPI WTM_AUTO_SWITCH settings, what is the exact role of the setting:
WTM_AUTO_SWITCH_SYNC_INTERVAL="3"
I suppose the units here are minutes.
Cheers
That's the time in minutes between syncing and getting coins profitability data from whattomine.com Thanks for the answer. I guess it doesn't have a big impact and I can live the value as it is.
|
|
|
|
Stubo
Member
Offline
Activity: 224
Merit: 13
|
|
December 18, 2017, 03:47:12 PM |
|
Hello everyone.
I want just to say thanks to anyone who makes our lives easier with this great distro...
I noticed a problem/bug with the community build. it was working great on ast Fullzero release 1.4 and i'm talking about wi-fi networking. Yes i'm using one rig with wi fi for obvious resons, and it was working great (tp-link 722n - chipset rtl8801eu), but since i made the update to community build the wi fi after every restart just hangs, stops working. usb stick isnt recognized. if i take it out of usb and reconnect everything starts working.
any idea what could be or what to do. can anyone take a look. maybe some boot priority for usb drivers?
thx
As per my post #6160 ( https://bitcointalk.org/index.php?topic=1854250.msg26247720#msg26247720), I think the only "changes" made in 19-2.0 that could be responsible for this are normal Ubuntu updates made by the upgrade script. As such, the next time you try the upgrade, change this line of the script and see if it resolves the issue: sudo -- sh -c 'apt update; apt upgrade -y; apt autoremove -y; apt autoclean -y; sudo apt install -y moreutils gawk'
to sudo -- sh -c 'sudo apt install -y moreutils gawk'
So, what that will do is upgrade your nvOC version to 19-2.0 but will not make any changes to your underlying Ubuntu system such as driver updates which I think are probably to blame here. Give it a go and let us know if it works for you.
|
|
|
|
_S_C_
Newbie
Offline
Activity: 11
Merit: 0
|
|
December 18, 2017, 03:53:32 PM Last edit: December 18, 2017, 04:04:07 PM by _S_C_ |
|
Hi guys, even after the new latest bios flash of my mobo, my situation remains the same ... trying nvOC 19-14 and 19-2 and I'm not able to boot my rig (black screen) ... If I look at my usb key after the facts, there are no more 1bash's file, no more 8coins file and no more Trash directory ...
Uefi bios enable >4G done Disable onboard gpu done Legacy usb support enabled done
Wonder what's wrong ? any ideas ? ...
Only 19-13 works here ...
-> rig's hardware setup : MB MSI Z270A PRO 8G ram usb key Sandisk 32 G Intel G4400 6 MSI 1080tis gaming x
-> rig's hardware setup : MB MSI Z270A PRO 8G ram usb key Sandisk 32 G Intel G4400 6 EVGA 1080tis ftw3 gaming
|
|
|
|
Stubo
Member
Offline
Activity: 224
Merit: 13
|
|
December 18, 2017, 04:30:35 PM |
|
Hi guys, even after the new latest bios flash of my mobo, my situation remains the same ... trying nvOC 19-14 and 19-2 and I'm not able to boot my rig (black screen) ... If I look at my usb key after the facts, there are no more 1bash's file, no more 8coins file and no more Trash directory ...
Uefi bios enable >4G done Disable onboard gpu done Legacy usb support enabled done
Wonder what's wrong ? any ideas ? ...
Only 19-13 works here ...
-> rig's hardware setup : MB MSI Z270A PRO 8G ram usb key Sandisk 32 G Intel G4400 6 MSI 1080tis gaming x
-> rig's hardware setup : MB MSI Z270A PRO 8G ram usb key Sandisk 32 G Intel G4400 6 EVGA 1080tis ftw3 gaming
Black screen tells me you are probably running LOCAL. Have you tried to ssh (putty) into it from a windows machine? When I have seen that black screen on my rigs, I have found that GPU0 has changed and the display is showing on another GPU that I am not connected to. If possible (open air rig), you could try connecting your monitor to the other GPUs until you find it. Or, if you are on 19-2.0, you can use the nvOC utility's gpumap function to find it: Hope this helps.
|
|
|
|
kk003
Member
Offline
Activity: 117
Merit: 10
|
|
December 18, 2017, 04:33:21 PM |
|
Hi guys, even after the new latest bios flash of my mobo, my situation remains the same ... trying nvOC 19-14 and 19-2 and I'm not able to boot my rig (black screen) ... If I look at my usb key after the facts, there are no more 1bash's file, no more 8coins file and no more Trash directory ...
Uefi bios enable >4G done Disable onboard gpu done Legacy usb support enabled done
Wonder what's wrong ? any ideas ? ...
Only 19-13 works here ...
-> rig's hardware setup : MB MSI Z270A PRO 8G ram usb key Sandisk 32 G Intel G4400 6 MSI 1080tis gaming x
-> rig's hardware setup : MB MSI Z270A PRO 8G ram usb key Sandisk 32 G Intel G4400 6 EVGA 1080tis ftw3 gaming
I think nvoc system is not uefi compatible. I would try to disable uefi bios.
|
|
|
|
killeriq
Newbie
Offline
Activity: 22
Merit: 0
|
|
December 18, 2017, 09:07:34 PM |
|
Hello, trying to mine Lyra with ccminer, but it just fail to run all the time: [2017-12-18 22:00:42] Starting on stratum+tcp://xzc.suprnova.cc:1569 [2017-12-18 22:00:42] NVML GPU monitoring enabled. [2017-12-18 22:00:42] 5 miner threads started, using 'lyra2z' algorithm.
/home.m1/2unix: line 138: 2205 Terminated bash '/home/m1/3main'
or /home.m1/2unix: line 138: 2907 Terminated bash '/home/m1/3main'
or
/home.m1/2unix: line 138: 3554 Terminated bash '/home/m1/3main'
Any clue how to fix it? thanks
|
|
|
|
Stubo
Member
Offline
Activity: 224
Merit: 13
|
|
December 18, 2017, 09:21:50 PM |
|
Hello, trying to mine Lyra with ccminer, but it just fail to run all the time: [2017-12-18 22:00:42] Starting on stratum+tcp://xzc.suprnova.cc:1569 [2017-12-18 22:00:42] NVML GPU monitoring enabled. [2017-12-18 22:00:42] 5 miner threads started, using 'lyra2z' algorithm.
/home.m1/2unix: line 138: 2205 Terminated bash '/home/m1/3main'
or /home.m1/2unix: line 138: 2907 Terminated bash '/home/m1/3main'
or
/home.m1/2unix: line 138: 3554 Terminated bash '/home/m1/3main'
Any clue how to fix it? thanks What version of nvOC? Are you LOCAL or REMOTE configuration?
|
|
|
|
infowire
Newbie
Offline
Activity: 96
Merit: 0
|
|
December 18, 2017, 10:40:31 PM Last edit: December 19, 2017, 12:28:09 AM by infowire |
|
So i mined for two weeks or more, no issue. All the sudden is goes off online and watchdog keeps rebooting. Why can teamviewer be on the bash script.... every time terminal is ran is restarts teamview... https://preview.ibb.co/jOdcvR/hmm.jpg
|
|
|
|
_S_C_
Newbie
Offline
Activity: 11
Merit: 0
|
|
December 18, 2017, 10:45:48 PM |
|
Hi guys, even after the new latest bios flash of my mobo, my situation remains the same ... trying nvOC 19-14 and 19-2 and I'm not able to boot my rig (black screen) ... If I look at my usb key after the facts, there are no more 1bash's file, no more 8coins file and no more Trash directory ...
Uefi bios enable >4G done Disable onboard gpu done Legacy usb support enabled done
Wonder what's wrong ? any ideas ? ...
Only 19-13 works here ...
-> rig's hardware setup : MB MSI Z270A PRO 8G ram usb key Sandisk 32 G Intel G4400 6 MSI 1080tis gaming x
-> rig's hardware setup : MB MSI Z270A PRO 8G ram usb key Sandisk 32 G Intel G4400 6 EVGA 1080tis ftw3 gaming
I think nvoc system is not uefi compatible. I would try to disable uefi bios. I'm already using no uefi (legacy enabled and secure boot disabled), this is not the problem. Strange thing is that all working nicely with 19-13 and lan's leds showing activities but with 19-14 still have black screen and no lan's leds activities at all ... any other idea ? Regards.
|
|
|
|
_S_C_
Newbie
Offline
Activity: 11
Merit: 0
|
|
December 18, 2017, 10:52:17 PM |
|
Hi guys, even after the new latest bios flash of my mobo, my situation remains the same ... trying nvOC 19-14 and 19-2 and I'm not able to boot my rig (black screen) ... If I look at my usb key after the facts, there are no more 1bash's file, no more 8coins file and no more Trash directory ...
Uefi bios enable >4G done Disable onboard gpu done Legacy usb support enabled done
Wonder what's wrong ? any ideas ? ...
Only 19-13 works here ...
-> rig's hardware setup : MB MSI Z270A PRO 8G ram usb key Sandisk 32 G Intel G4400 6 MSI 1080tis gaming x
-> rig's hardware setup : MB MSI Z270A PRO 8G ram usb key Sandisk 32 G Intel G4400 6 EVGA 1080tis ftw3 gaming
Black screen tells me you are probably running LOCAL. Have you tried to ssh (putty) into it from a windows machine? When I have seen that black screen on my rigs, I have found that GPU0 has changed and the display is showing on another GPU that I am not connected to. If possible (open air rig), you could try connecting your monitor to the other GPUs until you find it. Or, if you are on 19-2.0, you can use the nvOC utility's gpumap function to find it: Hope this helps. Indeed, I was on LOCAL mode. I've just used ssh with 19-14. I can connect to my rig but I have always the same message asking me to restart my computer ... any other idea ? Regards.
|
|
|
|
killeriq
Newbie
Offline
Activity: 22
Merit: 0
|
|
December 19, 2017, 12:02:03 AM |
|
Hello, trying to mine Lyra with ccminer, but it just fail to run all the time: [2017-12-18 22:00:42] Starting on stratum+tcp://xzc.suprnova.cc:1569 [2017-12-18 22:00:42] NVML GPU monitoring enabled. [2017-12-18 22:00:42] 5 miner threads started, using 'lyra2z' algorithm.
/home.m1/2unix: line 138: 2205 Terminated bash '/home/m1/3main'
or /home.m1/2unix: line 138: 2907 Terminated bash '/home/m1/3main'
or
/home.m1/2unix: line 138: 3554 Terminated bash '/home/m1/3main'
Any clue how to fix it? thanks What version of nvOC? Are you LOCAL or REMOTE configuration? Im on 19-20 and LOCAL, thx
|
|
|
|
CryptAtomeTrader44
Full Member
Offline
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
|
|
December 19, 2017, 01:06:04 AM |
|
Hello, trying to mine Lyra with ccminer, but it just fail to run all the time: [2017-12-18 22:00:42] Starting on stratum+tcp://xzc.suprnova.cc:1569 [2017-12-18 22:00:42] NVML GPU monitoring enabled. [2017-12-18 22:00:42] 5 miner threads started, using 'lyra2z' algorithm. /home.m1/2unix: line 138: 2205 Terminated bash '/home/m1/3main'
or /home.m1/2unix: line 138: 2907 Terminated bash '/home/m1/3main' or /home.m1/2unix: line 138: 3554 Terminated bash '/home/m1/3main'
Any clue how to fix it? thanks What version of nvOC? Are you LOCAL or REMOTE configuration? Im on 19-20 and LOCAL, thx Please, Execute in remote ssh terminal (Or at tty01 (CTRL+ALT+F1)) the nvOC report command and give us here the result by copy/paste nvOC file to diagnose is in /home/m1 Set this to NO in 1 bash AUTO_START_MINER="NO" # YES or NO # Set this to NO when troubleshooting, this will prevent the watchdog restarting the rig And try to execute or copy paste the minning command without automatic loop of nvOC Like that but in replacing variables : if [ $COIN == "ZCOIN" ] then HCD='/home/m1/TPccminer/ccminer' ADDR="$ZCOIN_ADDRESS.$ZCOIN_WORKER" [b] screen -dmSL miner $HCD -a lyra2z -o stratum+tcp://$ZCOIN_POOL:$ZCOIN_PORT -u $ADDR -p $MINER_PWD[/b] fi
|
|
|
|
AndersonFG
|
|
December 19, 2017, 01:57:17 AM |
|
This Linux support for B250 Expert Mining with 19 GPUs?
|
|
|
|
sikke1
Jr. Member
Offline
Activity: 44
Merit: 18
|
|
December 19, 2017, 01:58:27 AM |
|
This Linux support for B250 Expert Mining with 19 GPUs?
Yes
|
|
|
|
piccionipier
|
|
December 19, 2017, 02:14:09 AM |
|
It really is pretty easy to use! Is there a hypothetical gpu limit for the terminal at all or is it theoretically infinitely scalabe? thnx in advance!
|
|
|
|
|