[OS] nvOC easy-to-use Linux Nvidia Mining

[Stubo]

Hi guys, even after the new latest bios flash of my mobo, my situation remains the same ... trying nvOC 19-14 and 19-2 and I'm not able to boot my rig (black screen) ... If I look at my usb key after the facts, there are no more 1bash's file, no more 8coins file and no more Trash directory ...

Uefi bios enable >4G done
Disable onboard gpu done
Legacy usb support enabled done

Wonder what's wrong ? any ideas ? ...

Only 19-13 works here ...

-> rig's hardware setup :
MB MSI Z270A PRO
8G ram
usb key Sandisk 32 G
Intel G4400
6 MSI 1080tis gaming x

-> rig's hardware setup :
MB MSI Z270A PRO
8G ram
usb key Sandisk 32 G
Intel G4400
6 EVGA 1080tis ftw3 gaming

Black screen tells me you are probably running LOCAL. Have you tried to ssh (putty) into it from a windows machine? When I have seen that black screen on my rigs, I have found that GPU0 has changed and the display is showing on another GPU that I am not connected to. If possible (open air rig), you could try connecting your monitor to the other GPUs until you find it. Or, if you are on 19-2.0, you can use the nvOC utility's gpumap function to find it:

Code:

./nvOC gpumap

Hope this helps.

[kk003]

Hi guys, even after the new latest bios flash of my mobo, my situation remains the same ... trying nvOC 19-14 and 19-2 and I'm not able to boot my rig (black screen) ... If I look at my usb key after the facts, there are no more 1bash's file, no more 8coins file and no more Trash directory ...

Uefi bios enable >4G done
Disable onboard gpu done
Legacy usb support enabled done

Wonder what's wrong ? any ideas ? ...

Only 19-13 works here ...

-> rig's hardware setup :
MB MSI Z270A PRO
8G ram
usb key Sandisk 32 G
Intel G4400
6 MSI 1080tis gaming x

-> rig's hardware setup :
MB MSI Z270A PRO
8G ram
usb key Sandisk 32 G
Intel G4400
6 EVGA 1080tis ftw3 gaming

I think nvoc system is not uefi compatible. I would try to disable uefi bios.

[killeriq]

Hello,

trying to mine Lyra with ccminer, but it just fail to run all the time:

Code:

[2017-12-18 22:00:42] Starting on stratum+tcp://xzc.suprnova.cc:1569
[2017-12-18 22:00:42] NVML GPU monitoring enabled.
[2017-12-18 22:00:42] 5 miner threads started, using 'lyra2z' algorithm.

/home.m1/2unix: line 138: 2205 Terminated  bash '/home/m1/3main'

or

Code:

/home.m1/2unix: line 138: 2907 Terminated  bash '/home/m1/3main'

or

/home.m1/2unix: line 138: 3554 Terminated  bash '/home/m1/3main'

Any clue how to fix it? thanks

[Stubo]

Hello,

trying to mine Lyra with ccminer, but it just fail to run all the time:

Code:

[2017-12-18 22:00:42] Starting on stratum+tcp://xzc.suprnova.cc:1569
[2017-12-18 22:00:42] NVML GPU monitoring enabled.
[2017-12-18 22:00:42] 5 miner threads started, using 'lyra2z' algorithm.

/home.m1/2unix: line 138: 2205 Terminated  bash '/home/m1/3main'

or

Code:

/home.m1/2unix: line 138: 2907 Terminated  bash '/home/m1/3main'

or

/home.m1/2unix: line 138: 3554 Terminated  bash '/home/m1/3main'

Any clue how to fix it? thanks

What version of nvOC? Are you LOCAL or REMOTE configuration?

[infowire]

So i mined for two weeks or more, no issue.  All the sudden is goes off online and watchdog keeps rebooting.   Why can teamviewer be on the bash script.... every time terminal is ran is restarts teamview...

https://preview.ibb.co/jOdcvR/hmm.jpg

[_S_C_]

Hi guys, even after the new latest bios flash of my mobo, my situation remains the same ... trying nvOC 19-14 and 19-2 and I'm not able to boot my rig (black screen) ... If I look at my usb key after the facts, there are no more 1bash's file, no more 8coins file and no more Trash directory ...

Uefi bios enable >4G done
Disable onboard gpu done
Legacy usb support enabled done

Wonder what's wrong ? any ideas ? ...

Only 19-13 works here ...

-> rig's hardware setup :
MB MSI Z270A PRO
8G ram
usb key Sandisk 32 G
Intel G4400
6 MSI 1080tis gaming x

-> rig's hardware setup :
MB MSI Z270A PRO
8G ram
usb key Sandisk 32 G
Intel G4400
6 EVGA 1080tis ftw3 gaming

I think nvoc system is not uefi compatible. I would try to disable uefi bios.

I'm already using no uefi (legacy enabled and secure boot disabled), this is not the problem.

Strange thing is that all working nicely with 19-13 and lan's leds showing activities but with 19-14 still have black screen and no lan's leds activities at all ... any other idea ?

Regards.

[_S_C_]

Hi guys, even after the new latest bios flash of my mobo, my situation remains the same ... trying nvOC 19-14 and 19-2 and I'm not able to boot my rig (black screen) ... If I look at my usb key after the facts, there are no more 1bash's file, no more 8coins file and no more Trash directory ...

Uefi bios enable >4G done
Disable onboard gpu done
Legacy usb support enabled done

Wonder what's wrong ? any ideas ? ...

Only 19-13 works here ...

-> rig's hardware setup :
MB MSI Z270A PRO
8G ram
usb key Sandisk 32 G
Intel G4400
6 MSI 1080tis gaming x

-> rig's hardware setup :
MB MSI Z270A PRO
8G ram
usb key Sandisk 32 G
Intel G4400
6 EVGA 1080tis ftw3 gaming

Black screen tells me you are probably running LOCAL. Have you tried to ssh (putty) into it from a windows machine? When I have seen that black screen on my rigs, I have found that GPU0 has changed and the display is showing on another GPU that I am not connected to. If possible (open air rig), you could try connecting your monitor to the other GPUs until you find it. Or, if you are on 19-2.0, you can use the nvOC utility's gpumap function to find it:

Code:

./nvOC gpumap

Hope this helps.

Indeed, I was on LOCAL mode.

I've just used ssh with 19-14. I can connect to my rig but I have always the same message asking me to restart my computer ...
any other idea ?

Regards.

[killeriq]

Hello,

trying to mine Lyra with ccminer, but it just fail to run all the time:

Code:

[2017-12-18 22:00:42] Starting on stratum+tcp://xzc.suprnova.cc:1569
[2017-12-18 22:00:42] NVML GPU monitoring enabled.
[2017-12-18 22:00:42] 5 miner threads started, using 'lyra2z' algorithm.

/home.m1/2unix: line 138: 2205 Terminated  bash '/home/m1/3main'

or

Code:

/home.m1/2unix: line 138: 2907 Terminated  bash '/home/m1/3main'

or

/home.m1/2unix: line 138: 3554 Terminated  bash '/home/m1/3main'

Any clue how to fix it? thanks

What version of nvOC? Are you LOCAL or REMOTE configuration?

Im on 19-20 and LOCAL, thx

[CryptAtomeTrader44]

Hello,
trying to mine Lyra with ccminer, but it just fail to run all the time:

Code:

[2017-12-18 22:00:42] Starting on stratum+tcp://xzc.suprnova.cc:1569
[2017-12-18 22:00:42] NVML GPU monitoring enabled.
[2017-12-18 22:00:42] 5 miner threads started, using 'lyra2z' algorithm.
/home.m1/2unix: line 138: 2205 Terminated  bash '/home/m1/3main'

or

Code:

/home.m1/2unix: line 138: 2907 Terminated  bash '/home/m1/3main'
or
/home.m1/2unix: line 138: 3554 Terminated  bash '/home/m1/3main'

Any clue how to fix it? thanks

What version of nvOC? Are you LOCAL or REMOTE configuration?

Im on 19-20 and LOCAL, thx

Please,
Execute in remote ssh terminal (Or at tty01 (CTRL+ALT+F1)) the nvOC report command and give us here the result by copy/paste
nvOC file to diagnose is in /home/m1

Code:

nvOC report

Set this to NO in 1 bash

Code:

AUTO_START_MINER="NO"      # YES or NO # Set this to NO when troubleshooting, this will prevent the watchdog restarting the rig

And try to execute or copy paste the minning command without automatic loop of nvOC Like that but in replacing variables :

Code:

if [ $COIN == "ZCOIN" ]
then
  HCD='/home/m1/TPccminer/ccminer'
  ADDR="$ZCOIN_ADDRESS.$ZCOIN_WORKER"
[b]  screen -dmSL miner $HCD -a lyra2z -o stratum+tcp://$ZCOIN_POOL:$ZCOIN_PORT -u $ADDR -p $MINER_PWD[/b]
fi

[AndersonFG]

This Linux support for B250 Expert Mining with 19 GPUs?

[sikke1]

This Linux support for B250 Expert Mining with 19 GPUs?

Yes

[piccionipier]

It really is pretty easy to use! Is there a hypothetical gpu limit for the terminal at all or is it theoretically infinitely scalabe? thnx in advance!

[papampi]

Hello,

trying to mine Lyra with ccminer, but it just fail to run all the time:

Code:

[2017-12-18 22:00:42] Starting on stratum+tcp://xzc.suprnova.cc:1569
[2017-12-18 22:00:42] NVML GPU monitoring enabled.
[2017-12-18 22:00:42] 5 miner threads started, using 'lyra2z' algorithm.

/home.m1/2unix: line 138: 2205 Terminated  bash '/home/m1/3main'

or

Code:

/home.m1/2unix: line 138: 2907 Terminated  bash '/home/m1/3main'

or

/home.m1/2unix: line 138: 3554 Terminated  bash '/home/m1/3main'

Any clue how to fix it? thanks

What version of nvOC? Are you LOCAL or REMOTE configuration?

Im on 19-20 and LOCAL, thx

Try to lower the intensity
Also please post a report

Code:

~/nvOC report

[papampi]

Hello,
in the PAPAMPI WTM_AUTO_SWITCH settings, what is the exact role of the setting:

WTM_AUTO_SWITCH_SYNC_INTERVAL="3"

I suppose the units here are minutes.

Cheers

That's the time in minutes between syncing and getting coins profitability data from whattomine.com

Thanks for the answer. I guess it doesn't have a big impact and I can live the value as it is.

Actually it can have really big impact.
If you set too many coins with too low difference

Code:

WTM_MIN_DIFFERENCE="5" # Minimum difference in percent when switch to new coin, to prevent too many switches.

every 3 minutes it checks for better coin and may switch to a new one very fast.

When you set your coins and difference and sync time, its best to observe it from web page and check the last 10 switches for a day or more, if for example you had 10 switch in 2 hours, thats bad, every switch takes around 10-30 seconds for miner to start and almost same for miner to reach the optimum hash.
So it will be around 60 sec for each switch, if 10 switch in 2 hours, you have lost 10 minutes in 2 hours and will be 120 minutes or 2 hours in 24 hours ... Thats really bad.

In next version I'm adding a new variable for minimum mining time, so when it switch to a new coin it should stay on it for the given time before start checking for new coin to prevent fast switching.

[papampi]

So i mined for two weeks or more, no issue.  All the sudden is goes off online and watchdog keeps rebooting.   Why can teamviewer be on the bash script.... every time terminal is ran is restarts teamview...

It seems there is a mismatch in your 3main line 945, open 3main and check line 945

Or if you have never edited it, just open it and check to see which variable it points to in 1bash

[papampi]

Hi guys, even after the new latest bios flash of my mobo, my situation remains the same ... trying nvOC 19-14 and 19-2 and I'm not able to boot my rig (black screen) ... If I look at my usb key after the facts, there are no more 1bash's file, no more 8coins file and no more Trash directory ...

Uefi bios enable >4G done
Disable onboard gpu done
Legacy usb support enabled done

Wonder what's wrong ? any ideas ? ...

Only 19-13 works here ...

-> rig's hardware setup :
MB MSI Z270A PRO
8G ram
usb key Sandisk 32 G
Intel G4400
6 MSI 1080tis gaming x

-> rig's hardware setup :
MB MSI Z270A PRO
8G ram
usb key Sandisk 32 G
Intel G4400
6 EVGA 1080tis ftw3 gaming

I think nvoc system is not uefi compatible. I would try to disable uefi bios.

I'm already using no uefi (legacy enabled and secure boot disabled), this is not the problem.

Strange thing is that all working nicely with 19-13 and lan's leds showing activities but with 19-14 still have black screen and no lan's leds activities at all ... any other idea ?

Regards.

The most important change from 1.3 to 1.4 and 2.0 is nvidia update from 384 to 387.
We will release 2.0 image install any time soon, you can check that too.

Also changing HDMI connection to another card and reboot may help, it some times works for me.

[papampi]

I'm just starting to mine ETN over at mininghub and need nvOC to parse the workername to the miner, presumably I can just edit 1bash and 0miner as follows...?

1bash

Code:

# Electroneum(ETN) ## No Need to add stratum+tcp:// to server address
ETN_WORKER="$WORKERNAME"
ETN_ADDRESS="my account name"
ETN_POOL="europe.cryptonight-hub.miningpoolhub.com"
ETN_PORT="20596"

0miner

Code:

if [ $COIN == "ETN" ]
then
  HCD='/home/m1/KTccminer-cryptonight/ccminer'
  ADDR="$ETN_ADDRESS.$ETN_WORKER"

Thanks in advance
Mike

Sorry and Thanks for catching the bug
Worker was missing for KRB and ETN in 0miner and 1bash , fixed for stable release.

[papampi]

Hello everyone.

I want just to say thanks to anyone who makes our lives easier with this great distro...

I noticed a problem/bug with the community build. it was working great on ast Fullzero release 1.4 and i'm talking about wi-fi networking. Yes i'm using one rig with wi fi for obvious resons, and it was working great (tp-link 722n - chipset rtl8801eu), but since i made the update to community build the wi fi after every restart just hangs, stops working. usb stick isnt recognized. if i take it out of usb and reconnect everything starts working.


any idea what could be or what to do. can anyone take a look. maybe some boot priority for usb drivers?


thx

Can you check and see if vbrick solution for his mouse works for you too or not ?

[chem1990]

Can you check and see if vbrick solution for his mouse works for you too or not ?

hi, unfortunately you missed me by a few minutes... i already tryed everything i found on internet like this thing...

https://appuals.com/ubuntu-16-04-to-17-10-wifi-and-ethernet-problem/


not an expert linux user, i manage

i alredy deleted the usb and reinstalled fullzero version 1.9-1.4 now updateing with your script but without linux system updates...

will inform you about that..

[wi$em@n]

Installed nvOC 19-1.4 on my new rig, updated it with nvOC-19-2-update, edited 1bash and ZM miner began restarting almost every minute, while Wdog and Temp were showing that all was OK.
Noticed then that not all files and folders in /home/m1 were owned by m1. Did "sudo chown -R m1 /home/m1" and no ZM restart since. May be it's worth adding this command to the
nvOC-19-2-update, just in case.