[4+ EH] Slush Pool (slushpool.com); Overt AsicBoost; World First Mining Pool

[SlushPool official]

Just wondered why the pool shows NMC blocks and rewards?

I cant see a NMC balance/withdraw anywhere.

Hi, actually we convert your NMC automatically to BTC and these are already included in your regular payouts. Read more regarding merged mining on the link below:
https://slushpool.com/help/#!/first-aid/faq-merged-mining

[naypalm]

Is there any way to see who actually mines the blocks on this pool. My miner dashboard says Found Blocks:1, but I want to know if it is correct?

Thanks  

I thought that NMC merged mining was stopped well over 3 years ago...

[CarrollFilms]

Man, my miners are finding lots of blocks. It's like the halving didn't even affect my miners reward rate.

[angelnero]

New to Slush and have some quick question/s regarding auto merged mining of NMC.

Does the unconfirmed reward include the NMC rewards that are still in processing status?
Does the confirmed reward include NMC rewards that have completed processing?

Last one...Why is it that I have NMC rewards that have completed processing posted in my rewards history, but my BTC conversion of those rewards are 0.  Is it because the value of the NMC to BTC conversion was lower than some sort of threshold/ceiling?  If so, what is that threshold?

Thanks All!

[JimV]

####Edit#####

I believe one of my power supplies was weak causing all my issues.

Seems to be running fine now I switched out the power supply.

Disregard following post ----˅˅˅˅


Hi Guys/Gals

Anyone else having major issues with the Antminer S9's.

Mine ran fine full speed (~11) for 3 days then I noticed on the 4th day I was getting a scoring rate of around 8TH/s (one time it was almost 6).

So I powered down the miner then it runs fine at 10.5 - 11.5 TH/s for about 20 hours then my hash rate drops to like 9 - 8.5 and stays there.

I was asked by support to change my difficulty to 14336 that helped a bit but still not getting consistent results.

I was using stratum.bitcoin.cz:3333 and then switched to us-east.stratum.bitcoin.cz:3333 and it seemed to get worse.

Anyone have any ideas or heard anything?

[SlushPool official]

Is there any way to see who actually mines the blocks on this pool. My miner dashboard says Found Blocks:1, but I want to know if it is correct?

Thanks  

Hi runnerman1,

Actually we have removed this particular statistics from our UI some time ago. If you wish to see it again, you can insert proposal into our Dev. Corner and let the community vote for/against this feature. If enough hash rate supports this proposal we can enable it again.
https://slushpool.com/devcorner/

[SlushPool official]

New to Slush and have some quick question/s regarding auto merged mining of NMC.

Does the unconfirmed reward include the NMC rewards that are still in processing status?
Does the confirmed reward include NMC rewards that have completed processing?

Last one...Why is it that I have NMC rewards that have completed processing posted in my rewards history, but my BTC conversion of those rewards are 0.  Is it because the value of the NMC to BTC conversion was lower than some sort of threshold/ceiling?  If so, what is that threshold?

Thanks All!

Hi angelnero,

1. Does the unconfirmed reward include the NMC rewards that are still in processing status?
- Actually it does not include the NMC rewards. I will report it as a bug.
2. Does the confirmed reward include NMC rewards that have completed processing?
- Yes, it includes NMC rewads.
3. Last one...Why is it that I have NMC rewards that have completed processing posted in my rewards history, but my BTC conversion of those rewards are 0.  Is it because the value of the NMC to BTC conversion was lower than some sort of threshold/ceiling?  If so, what is that threshold?
- Yes, if the hash rate of a miner is low then there is a possibility that NMC rewards are such small that they are rounded to 0.

[bilabonic]

Hi All

HELP - CAN NOT DELETE/REMOVE REDUNDANT WORKERS ?

Not sure what is going on but when i go on the WORKERS page and select 'edit', the tab to delete the worker is not 'highlighted' or selectable....

I can only just select 'cancel' 

Anyone, i have 3 workers removed from the pool but they are just showing as (red ! - OFF)..

Cheers

[angelnero]

New to Slush and have some quick question/s regarding auto merged mining of NMC.

Does the unconfirmed reward include the NMC rewards that are still in processing status?
Does the confirmed reward include NMC rewards that have completed processing?

Last one...Why is it that I have NMC rewards that have completed processing posted in my rewards history, but my BTC conversion of those rewards are 0.  Is it because the value of the NMC to BTC conversion was lower than some sort of threshold/ceiling?  If so, what is that threshold?

Thanks All!

Hi angelnero,

1. Does the unconfirmed reward include the NMC rewards that are still in processing status?
- Actually it does not include the NMC rewards. I will report it as a bug.
2. Does the confirmed reward include NMC rewards that have completed processing?
- Yes, it includes NMC rewads.
3. Last one...Why is it that I have NMC rewards that have completed processing posted in my rewards history, but my BTC conversion of those rewards are 0.  Is it because the value of the NMC to BTC conversion was lower than some sort of threshold/ceiling?  If so, what is that threshold?
- Yes, if the hash rate of a miner is low then there is a possibility that NMC rewards are such small that they are rounded to 0.

Thanks for getting back to me, appreciate it.

[SlushPool official]

Hi All

HELP - CAN NOT DELETE/REMOVE REDUNDANT WORKERS ?

Not sure what is going on but when i go on the WORKERS page and select 'edit', the tab to delete the worker is not 'highlighted' or selectable....

I can only just select 'cancel' 

Anyone, i have 3 workers removed from the pool but they are just showing as (red ! - OFF)..

Cheers

Hi bilabonic,

the tab to delete the worker is going to be highlighted 24 hours after you stop mining with your miner. Therefore please just be patient and wait 24 hours.

[bilabonic]

Hi All

HELP - CAN NOT DELETE/REMOVE REDUNDANT WORKERS ?

Not sure what is going on but when i go on the WORKERS page and select 'edit', the tab to delete the worker is not 'highlighted' or selectable....

I can only just select 'cancel' 

Anyone, i have 3 workers removed from the pool but they are just showing as (red ! - OFF)..

Cheers

Hi bilabonic,

the tab to delete the worker is going to be highlighted 24 hours after you stop mining with your miner. Therefore please just be patient and wait 24 hours.

Thanks for reply.

[SlushPool official]

We are attacking 100PH. Thanks for mining with us ! Can we reach 100PH today?  

[fuzion1]

Hello slush,

Could you please add a feature to enter a secondary email for monitoring reports? I have my miners hosted and this would be a must have feature so they can get down miner reports to fix them faster.

Your pool is very nice I moved from Kano a couple of weeks ago.

Thanks

[bilabonic]

Hello slush,

Could you please add a feature to enter a secondary email for monitoring reports? I have my miners hosted and this would be a must have feature so they can get down miner reports to fix them faster.

Your pool is very nice I moved from Kano a couple of weeks ago.

Thanks

I did not know they even had email monitoring !!

[SlushPool official]

Hello slush,

Could you please add a feature to enter a secondary email for monitoring reports? I have my miners hosted and this would be a must have feature so they can get down miner reports to fix them faster.

Your pool is very nice I moved from Kano a couple of weeks ago.

Thanks

Hello Fuzion1,
we really appreciate your suggestion. However we are receiving a lot of improvement proposals now, we have to sort them by priority.
In order to achieve this goal effectively and to satisfy the the greatest possible number of our miners we developed simple "proposals management tool" which you can find here: https://slushpool.com/devcorner/
 
Actually you can vote for this proposal since it is already there:
https://slushpool.com/proposal/detail/539/
 Have a nice day from
    Neli

[fuzion1]

Hello slush,

Could you please add a feature to enter a secondary email for monitoring reports? I have my miners hosted and this would be a must have feature so they can get down miner reports to fix them faster.

Your pool is very nice I moved from Kano a couple of weeks ago.

Thanks

Hello Fuzion1,
we really appreciate your suggestion. However we are receiving a lot of improvement proposals now, we have to sort them by priority.
In order to achieve this goal effectively and to satisfy the the greatest possible number of our miners we developed simple "proposals management tool" which you can find here: https://slushpool.com/devcorner/
 
Actually you can vote for this proposal since it is already there:
https://slushpool.com/proposal/detail/539/
 Have a nice day from
    Neli

Ya I already voted for it.  I thought maybe you could bump it to the top of the list. It would be an easy thing to add and would help a lot of your miners.

Thanks

[SlushPool official]

Hello slush,

Could you please add a feature to enter a secondary email for monitoring reports? I have my miners hosted and this would be a must have feature so they can get down miner reports to fix them faster.

Your pool is very nice I moved from Kano a couple of weeks ago.

Thanks

Hello Fuzion1,
we really appreciate your suggestion. However we are receiving a lot of improvement proposals now, we have to sort them by priority.
In order to achieve this goal effectively and to satisfy the the greatest possible number of our miners we developed simple "proposals management tool" which you can find here: https://slushpool.com/devcorner/
 
Actually you can vote for this proposal since it is already there:
https://slushpool.com/proposal/detail/539/
 Have a nice day from
    Neli

Ya I already voted for it.  I thought maybe you could bump it to the top of the list. It would be an easy thing to add and would help a lot of your miners.

Thanks

Hello Fuzion1,
temporary you can do these two things:
1. You can set up the automatical forwarding of your monitoring e-mails to your hosting provider.
2. You can share read-only token with them, which will allow them to see the performance of your miner in Slush Pool account:
https://slushpool.com/settings/api/
   Happy mining with us,
       Neli

[xbach]

300% luck? what happened

https://www.reddit.com/r/BitcoinMining/comments/52rv84/incredible_300_luck_on_slush_pool_today/

[sbtctalk]

300% luck? what happened

https://www.reddit.com/r/BitcoinMining/comments/52rv84/incredible_300_luck_on_slush_pool_today/

So they fixed the slush pool long standing problem?

[SlushPool official]

300% luck? what happened

https://www.reddit.com/r/BitcoinMining/comments/52rv84/incredible_300_luck_on_slush_pool_today/

So they fixed the slush pool long standing problem?

This issue has been already solved half a year ago.