PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[noobminer88]

Where is this clown phoenixminer developer?

Last Active:   August 07, 2020, 06:15:49 AM

nice support!!! ((

He spends money from devfee.

YEPP! GET A LIFE DUDE!
this DEV miner dont force you to use it.

[neconixoid]

have error with 'debugger detected"
-nvidia doesn't help
use last version of phoenix on ubuntu 18.04

nvidia drivers 455 & 450

cards: gtx 1070

[fomkas]

373 epoch almost killed me ... but everything seems to be alive again ...
ps RX570 4gb

[scryptr]

scam

YES, A SCAM POST WAS THERE YESTERDAY--

Please just report the scam post.  There is a link at the bottom right corner of every post on BitCoinTalk to report a scam or otherwise improper post.  Just use the link, the moderator is deleting these posts as fast as he can.

The posts always have a new (stolen) username, and promise a "pill" that works across multiple video card brands and memory types.  The results posted are also too good to be true.  A valid developer or development team normally has only a very limited (1 or 2) official posting accounts.

Just report the scam, it has been sandboxed, tested, and is malware.  Don't download it.       --scrypter

[Pathils]

SOME ONE remove this SCAM posts. and ban this guy.

i already got scammed once by it .

[dwdhu]

Claymore's AMD -straps and -rxboost commands/features will be implemented before Claymore miner die in Dec?

[scryptr]

SOME ONE remove this SCAM posts. and ban this guy.

i already got scammed once by it .

THE SCAM POSTS ARE BEING REMOVED--

And, the users are likely deleted also.  Whoever is posting these uses stolen usernames that have been idle, more than 75 so far.  The moderator removes them every day, as long as the post is reported.  Use the "report to moderator" link found at the bottom right of every BitCoinTalk when you see the post.  Just do it!  Thanks,        --scryptr

[adaseb]

373 epoch almost killed me ... but everything seems to be alive again ...
ps RX570 4gb

Yours should work until EPOCH 379, maybe 380, however 381 will definately not work. If you are getting issues now then you are most likely not using onboard graphics as the main GPU in Linux. Basically go to your motherboard bios and enable onboard graphics, they will usually be automatically disabled and plug your monitor into the motherboards DVI connector and disconnect from the GPU.

Then try again and it should work. You can also use the -benchmark setting and try different DAG numbers and you will know exactly when it will stop to work for you. You pretty much got a month or so to go. After that you need to either upgrade the GPUs or use another software like lolminer which can mine after 4GB at reduced speeds.

[Wolfie]

Hey man -

Would you be so kind as to look into adding support for ProgPow-Epic ,

$EPIC = Epic Cash, 3 algo MW coin, 21mill supply, great little project

With all the 4GB cards available, we need some decent work for them.

Here is their GitLab link :

https://gitlab.com/epiccash

SRBminer already supports them RandomX\CPU,

TTminer already support them on ProgPOW\nVidia

thx in advance for anything you can do

[UnclWish]

Hey man -

Would you be so kind as to look into adding support for ProgPow-Epic ,

$EPIC = Epic Cash, 3 algo MW coin, 21mill supply, great little project

With all the 4GB cards available, we need some decent work for them.

Here is their GitLab link :

https://gitlab.com/epiccash

SRBminer already supports them RandomX\CPU,

TTminer already support them on ProgPOW\nVidia

thx in advance for anything you can do

Phoenix miner is only for ethereum algos.

[fomkas]

373 epoch almost killed me ... but everything seems to be alive again ...
ps RX570 4gb

Yours should work until EPOCH 379, maybe 380, however 381 will definately not work. If you are getting issues now then you are most likely not using onboard graphics as the main GPU in Linux. Basically go to your motherboard bios and enable onboard graphics, they will usually be automatically disabled and plug your monitor into the motherboards DVI connector and disconnect from the GPU.

Then try again and it should work. You can also use the -benchmark setting and try different DAG numbers and you will know exactly when it will stop to work for you. You pretty much got a month or so to go. After that you need to either upgrade the GPUs or use another software like lolminer which can mine after 4GB at reduced speeds.

i'am on windows)))) ... i wait when all juice down from windows....

[Binary100100]

don't trust anyone, check the information yourself

Noted. Thanks for the advice.
(Reported)

[UnclWish]

Anyone know if this is any better than the OhGodAnETHlargementPill?

Don't use it, it's scam.

[Wolfie]

Hey man -

Would you be so kind as to look into adding support for ProgPow-Epic ,

$EPIC = Epic Cash, 3 algo MW coin, 21mill supply, great little project

With all the 4GB cards available, we need some decent work for them.

Here is their GitLab link :

https://gitlab.com/epiccash

SRBminer already supports them RandomX\CPU,

TTminer already support them on ProgPOW\nVidia

thx in advance for anything you can do

Phoenix miner is only for ethereum algos.

How does it do ProgPOW for BCi?


from page 1:


PhoenixMiner also supports Ubqhash for mining UBQ, ProgPOW for mining BCI,  . . .

the mod should be simple, the EPIC ProgPOW just need to interpolate the pause when it algo switches

[bobalazs]

Epoch #385 on ETC

There is now hashrate drop under windows in 4 gb cards.

[reisdaddy]

Need help guys,

My MSI Radeon RX 5700 XT Gaming with this setting 5.1c:

Code:

-acm -clKernel 1 -clNew 1 -clf 0 ^
-gt 126 -cclock 1300 -cvddc 750 -mclock 900 ^

Windows 10.
it runs smooth (copy fromk log):

Code:

2020.11.06:13:23:19.563: main GPU1: 66C 41% 105W
GPU1: cclock 1267 MHz, cvddc 756 mV, mclock 1750 MHz, mvddc 850 mV, Tj 72C, Tmem 94C
2020.11.06:13:23:41.618: main Eth speed: 50.552 MH/s, shares: 3/0/0, time: 0:01

But what im worried is: Tmem 94C ??
We can fry en egg at 94c...

[UnclWish]

For my RX 580 8Gb rigs Phoenix 5.1c didn't create DAG epoch №385. It creates DAG for 0,5 sec and all shares are incorrect. Speed shows normal.

I think PM just didn't support epochs 385+

[Pe_Da]

For my RX 580 8Gb rigs Phoenix 5.1c didn't create DAG epoch №385. It creates DAG for 0,5 sec and all shares are incorrect. Speed shows normal.

I think PM just didn't support epochs 385+

Looks similar here, since estimated 6 hours almost all shares on ETC-Mining (Ethermine) are invalid.
ETH seems to be working properly, still ...

Doublecheck with NBMiner, no issues! Seems to be a problem with Phoenix only .... oh wait, NBMiner produce many (>20%) rejected shares at ETC-Mining currently ... 

[UnclWish]

For my RX 580 8Gb rigs Phoenix 5.1c didn't create DAG epoch №385. It creates DAG for 0,5 sec and all shares are incorrect. Speed shows normal.

I think PM just didn't support epochs 385+

Looks similar here, since estimated 6 hours almost all shares on ETC-Mining (Ethermine) are invalid.
ETH seems to be working properly, still ...

Doublecheck with NBMiner, no issues! Seems to be a problem with Phoenix only .... oh wait, NBMiner produce many (>20%) rejected shares at ETC-Mining currently ... 

I'm use lolMiner now. All fine.

[fanis77]

For my RX 580 8Gb rigs Phoenix 5.1c didn't create DAG epoch №385. It creates DAG for 0,5 sec and all shares are incorrect. Speed shows normal.

I think PM just didn't support epochs 385+

Same problem...incorrect shares on epoch 385