Dem0N
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 26, 2018, 01:48:24 PM |
|
Hi, your miner is good but don't have very important function - API. We need to have ability to monitoring states of rig on distance.
|
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
March 26, 2018, 07:27:01 PM |
|
Baffin RX 550 2 gb polaris 21. oneclick timing strap with Polaris. ( don't ask me why but the same with SRBpolaris doesn't work) Shaders unlocked with SRBPolaris Works with XMR stak, Claymore but not with SRBminer No hash either with one thread or two. Btw, running it without any intensity and with one thread intensity is set at 58, with two at 25 Lexa (polaris 12) work even at those intensity Baffin: no way and even at 12 doesn't hash I will try later with the original bios
|
|
|
|
rocotto
Newbie
Offline
Activity: 19
Merit: 0
|
|
March 27, 2018, 10:23:18 AM |
|
Hi Dev,
I execute the atart.bat. It always display "Error in config.txt(ParseError) Could you help me to check it? Thank you! ------------------------- My device ID: [2018-03-27 18:14:03] GPU0: Radeon RX 570 Series (BUS_ID 1)
------------------------- the content of Start.bat:
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_MAX_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_MAX_SINGLE_ALLOC_PERCENT 100 @echo off
cls SETLOCAL EnableExtensions set EXE=SRBMiner-CN.exe
:START FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %EXE%"') DO IF %%x == %EXE% goto RUNNING %EXE% -c config.txt TIMEOUT /T 15 /NOBREAK goto START :RUNNING echo "%EXE% is already running" pause
------------------------- the content of config.txt:
"cryptonight_lite" : false, "intensity" : 0, "double_threads" : true, "target_temperature" : 85, "pool_use_tls" : false, "pool" : "stratum+tcp://94.130.207.37:50201", "wallet" : "eL2xcdnR6w8Q882DmkmtrG4AzgrD6iN1L1WBzDvn5zmPDYTAaXtvYknfPCexjpkwKW8ThDzbRjcWh1e 8nYcV24hA1mZJMcjYn", "password" : "x", "location" : "asia", "log_file" : "", "charity_pool" : "", "charity_wallet" : "", "charity_password" : "" "gpu_conf" : [ { "id" : 1, "intensity" : 0, "double_threads" : true}, ]
|
|
|
|
doktor83 (OP)
|
|
March 27, 2018, 10:49:01 AM |
|
"charity_password" : "", "gpu_conf" : [ { "id" : 0, "intensity" : 0, "double_threads" : true}, ]
You were missing the , after charity, and your gpu id is 0 , not 1.
|
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
March 27, 2018, 11:21:04 AM |
|
at least in previous version it was mandatory to have a log file in the logfile ""
|
|
|
|
jindouyun4444
Newbie
Offline
Activity: 20
Merit: 0
|
|
March 27, 2018, 01:01:33 PM |
|
Didn't work on my amd a4 apu,it read:“failed to get ATI ADL pointer“,and the screen suddenly went to black and then restored
|
|
|
|
doktor83 (OP)
|
|
March 28, 2018, 01:35:21 PM |
|
V1.1.2 - Using different kernel for GCN and pre-GCN cards - Intensity can now be more fine-tuned, it can be a decimal number (ex.: 17.2) - Speedup about 2% in single thread mode - Config file now begins with { and ends with }, so no more empty line bug
|
|
|
|
UnclWish
|
|
March 28, 2018, 02:24:41 PM |
|
V1.1.2 - Using different kernel for GCN and pre-GCN cards - Intensity can now be more fine-tuned, it can be a decimal number (ex.: 17.2) - Speedup about 2% in single thread mode - Config file now begins with { and ends with }, so no more empty line bug
Good! Let's try it.
|
|
|
|
doktor83 (OP)
|
|
March 28, 2018, 02:26:46 PM |
|
V1.1.2 - Using different kernel for GCN and pre-GCN cards - Intensity can now be more fine-tuned, it can be a decimal number (ex.: 17.2) - Speedup about 2% in single thread mode - Config file now begins with { and ends with }, so no more empty line bug
Good! Let's try it. I guess you still wont have luck with that single 270xcard thing, as i think its more driver related problem, cause of the mixed cards.
|
|
|
|
UnclWish
|
|
March 28, 2018, 02:44:04 PM |
|
V1.1.2 - Using different kernel for GCN and pre-GCN cards - Intensity can now be more fine-tuned, it can be a decimal number (ex.: 17.2) - Speedup about 2% in single thread mode - Config file now begins with { and ends with }, so no more empty line bug
Good! Let's try it. I guess you still wont have luck with that single 270xcard thing, as i think its more driver related problem, cause of the mixed cards. But other miners like Claymore and Gateless Gate (Old and Sharp) can handle this situation...
|
|
|
|
doktor83 (OP)
|
|
March 28, 2018, 02:58:35 PM |
|
well then ill have to look into it
|
|
|
|
UnclWish
|
|
March 28, 2018, 03:03:05 PM |
|
well then ill have to look into it Thanks! Just often my RX 580 must mine other algo than 270X.
|
|
|
|
Bulitt
Member
Offline
Activity: 108
Merit: 11
|
|
March 28, 2018, 03:24:18 PM |
|
So it runs in monero with the default config, but if I try to edit the "GPU_CONF" section by uncommenting it, I get an error. Ive triple checked the syntax it is perfect.
I also tried putting the decimal point for intensity in the gpu_conf section of the config and it says it sets the intensity to 0 but it appears to be working properly.
It runs but the hashrates are abysmal because the auto-intensity is so low. It also auto-configures all the cards with the same intensity instead of actually detecting them separately.
Also still getting compute error from the HD 6950 in AEON mode.
|
|
|
|
Dodnastes
Newbie
Offline
Activity: 58
Merit: 0
|
|
March 28, 2018, 05:38:05 PM |
|
What is the best driver for this miner if I have 280X and R9 390?
|
|
|
|
doktor83 (OP)
|
|
March 28, 2018, 09:55:04 PM |
|
V1.1.3 - Fixed a bug from previous version where non decimal intensity in 'gpu_conf' did not work - Fixed a bug in Pow V7 algo
If anyone wants to test Pow V7 before start, you can do it on moneroworld by using this conf :
{ "cryptonight_lite" : false, "intensity" : 0, "double_threads" : false, "target_temperature" : 0, "pool_use_tls" : false, "pool" : "killallasics.moneroworld.com:7777", "wallet" : "9v4vTVwqZzfjCFyPi7b9Uv1hHntJxycC4XvRyEscqwtq8aycw5xGpTxFyasurgf2KRBfbdAJY4AVcem L1JCegXU4EZfMtaz", "password" : "x", "location" : "europe", "log_file" : "", }
If it finds valid shares that means the new algo will work!
|
|
|
|
Bojcha
|
|
March 29, 2018, 12:46:58 AM |
|
najs rx570.. ^^
|
|
|
|
segotiwul
Member
Offline
Activity: 322
Merit: 10
|
|
March 29, 2018, 02:44:27 AM |
|
There are so many screws and nuts to make tools in the media, we learn from the drawing then we are easy to assemble it because it has provided clear instructions. But there is 5x long aloe peices and 5x short alu peices and 4 slightly shorter, for that we must be careful in installing it.
|
|
|
|
Pennywis3
|
|
March 29, 2018, 09:38:42 AM |
|
Can't get this to work. Miner just closes after a few minutes, tried different settings. No error, the CMD just vanishes. Also if i press H for hashrate the miner closes in 15s.
|
|
|
|
doktor83 (OP)
|
|
March 29, 2018, 09:42:58 AM |
|
Can't get this to work. Miner just closes after a few minutes, tried different settings. No error, the CMD just vanishes.
maybe some info, like which cards, OS, driver, configuration example?
|
|
|
|
Pennywis3
|
|
March 29, 2018, 09:44:51 AM |
|
Can't get this to work. Miner just closes after a few minutes, tried different settings. No error, the CMD just vanishes.
maybe some info, like which cards, OS, driver, configuration example? rx 480 cards win 10 pro x64 17.12.1 drivers { "cryptonight_lite" : false, "intensity" : 0, "double_threads" : true, "target_temperature" : 0, "pool_use_tls" : false, "pool" : "pool.minexmr.com:7777", "wallet" : "*****", "password" : "x", "location" : "europe", "log_file" : "test.txt", "gpu_conf" : [ { "id" : 0, "intensity" : 20, "double_threads" : true }, { "id" : 1, "intensity" : 20, "double_threads" : true }, { "id" : 2, "intensity" : 20, "double_threads" : true }, ] } Šta ima čovječe, ne radi
|
|
|
|
|