SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[doktor83]

@doktor

Why is it making a new srb file everytime if u only change the intensity?
Cause the name isn't changing.
Just curious

thanks for pointing this out, i was testing and it left that way.. kernel building should be faster in next version

[1714251671]

1714251671

[1714251671]

1714251671

[WhyMe]

Any news on my devfee problem ?
And on a version with command line parameters and not in config file ?
Thanks

[doktor83]

Any news on my devfee problem ?
And on a version with command line parameters and not in config file ?
Thanks

working on devfee and logging, command line parameters not important right now.
Elaborate, why isn't config file ok for you?

[whiteyellowcondensate]

Hey, someone asked before but it may have been missed.

Will there be a Linux version? 

[Nss75]

Hello everyone!
Thanks to the dev for the great job.

I have some question about Haven mining (cn heavy).

I run a 6 gpu (Vega 64 8mb) rig with srbminer to mine haven.
It seems that my hashrate is not optimal comparing to others reporting 1500+ h/s using Vega 64 or 54 with xmr-stak.

I only get around 950h/s per gpu (max 1400 but drowning quickly)...
I also get some miner crash quite often.
I wonder if i do something wrong with the settings or if it is a miner/gpu limits...

The best hashrate i get comes with this settings.
-algo: heavy
-pool use ssl/tls: false
-target temperature: 0
-"intensity 55"
-i use cryptoknight pool (luckypool gave me the same result).

gpu config
-Intensity 150 for each gpu, double thread "true"

-Virtual memory on my computer 30000-60000
-On afterburner: coreclock 950, memory 1020

I get around 900-950 h/s per card with thoses settings (and was the best i could hit), wich seems to be low according to others

Does anyone have any idea of what i did wrong, or if it is srbminer limits?

Thanks a lot!

[WhyMe]

Any news on my devfee problem ?
And on a version with command line parameters and not in config file ?
Thanks

working on devfee and logging, command line parameters not important right now.
Elaborate, why isn't config file ok for you?

To configure new coin with your miner, we are forced to do it on each rig. Very time consuming when you have to do it on few rigs.
With miner having full command line parameters, i've just to configure it in my tool and miner starts/restarts without having remote session on rig.

[vanthuspkt]

I use SRBMiner Cryptonight AMD GPU Miner V1.3.1 for RX380
but It error CPU does not support ASE-NI.
I mining HAVEN COIN.

can You help me?

[doktor83]

Any news on my devfee problem ?
And on a version with command line parameters and not in config file ?
Thanks

working on devfee and logging, command line parameters not important right now.
Elaborate, why isn't config file ok for you?

To configure new coin with your miner, we are forced to do it on each rig. Very time consuming when you have to do it on few rigs.
With miner having full command line parameters, i've just to configure it in my tool and miner starts/restarts without having remote session on rig.

SRBMiner-CN.exe -c anycoinconfig.txt is working, so just make a separate .bat and conf file for every coin.
I can add cmd line params later , when the important stuff is done.

[doktor83]

I use SRBMiner Cryptonight AMD GPU Miner V1.3.1 for RX380
but It error CPU does not support ASE-NI.
I mining HAVEN COIN.

can You help me?

Its not an error, its just a notice.

[Turkish88]

How to set RPM to % for fans?

I am also wait whis feature, but it seems that it is not realized yet.
And with coming bugs in new version i think better i stay on 1.2.5 it working without errors for me

[vanthuspkt]

I use SRBMiner Cryptonight AMD GPU Miner V1.3.1 for RX380
but It error CPU does not support ASE-NI.
I mining HAVEN COIN.

can You help me?

Its not an error, its just a notice.

But after 15s this Tool close. It can not start run.

[Turkish88]

I use SRBMiner Cryptonight AMD GPU Miner V1.3.1 for RX380
but It error CPU does not support ASE-NI.
I mining HAVEN COIN.

can You help me?

Its not an error, its just a notice.

But after 15s this Tool close. It can not start run.

There is not enough information we have to hep you
can you post with what error program close

[gugs]

What a wonderful miner, awesome job done doktore

6x RX470/4GB Elpida @ 1200/2000 - 976h/s per card @ Cryptonightv7, Msi Afterburner @ -200 undervolt, power draw total from wall 685 watts

I don't know if it is already proposed as feature but adding failover pools option will make it the best miner.

Keep up the good work!

[tenmoi]

What a wonderful miner, awesome job done doktore

6x RX470/4GB Elpida @ 1200/2000 - 976h/s per card @ Cryptonightv7, Msi Afterburner @ -200 undervolt, power draw total from wall 685 watts

I don't know if it is already proposed as feature but adding failover pools option will make it the best miner.

Keep up the good work!

Could you please share your config.txt file?

[GelatinousCube]

Hello everyone!
Thanks to the dev for the great job.

I have some question about Haven mining (cn heavy).

I run a 6 gpu (Vega 64 8mb) rig with srbminer to mine haven.
It seems that my hashrate is not optimal comparing to others reporting 1500+ h/s using Vega 64 or 54 with xmr-stak.

I only get around 950h/s per gpu (max 1400 but drowning quickly)...
I also get some miner crash quite often.
I wonder if i do something wrong with the settings or if it is a miner/gpu limits...

The best hashrate i get comes with this settings.
-algo: heavy
-pool use ssl/tls: false
-target temperature: 0
-"intensity 55"
-i use cryptoknight pool (luckypool gave me the same result).

gpu config
-Intensity 150 for each gpu, double thread "true"

-Virtual memory on my computer 30000-60000
-On afterburner: coreclock 950, memory 1020

I get around 900-950 h/s per card with thoses settings (and was the best i could hit), wich seems to be low according to others

Does anyone have any idea of what i did wrong, or if it is srbminer limits?

Thanks a lot!

hello to give you a idea with my single vega 64  p1100/950 I am mining cn-heavy for sumo after a crash I set to 0 and false which set a 56 intensity setting and an getting 1500h/s with a h button of 1460h/s  only been on this miner for 2 days so I have a way to go to dial in but this looks to me like  the go to miner for cn-heavy
on reading did you toggle the vega off and on in device manger
upon further digging I have a vega 64 in a rig and that one is getting 988h/s so I might be in the same boat will have to investigate further

[Pennywis3]

What a wonderful miner, awesome job done doktore

6x RX470/4GB Elpida @ 1200/2000 - 976h/s per card @ Cryptonightv7, Msi Afterburner @ -200 undervolt, power draw total from wall 685 watts

I don't know if it is already proposed as feature but adding failover pools option will make it the best miner.

Keep up the good work!

Try using another tool for setting core mV, like OverdriveNTool or smth. and set those cards below 900mV, some even run at 820mV@1200Mhz, depends on the Asic %.

You can get a rig like that running below 600W@the wall.

Just a suggestion, no hard feelings 

[zeii]

Hi

when i try to just one gpu:

"gpu_conf" :
[

   { "id" : 3, "intensity" : 120, "worksize" : 16, "threads" : 2},
]
}

i get an error this error:

Error CL_INVALID_DEVICE when calling clCreateContext

however if i run all 4..it works. can you please assist me on getting one gpu only to mine?

thanks

same here. If i disable 1 gpu it eror like this.
if run all 4 it work fine.

[inv1s1bl3]

Tried mining Sumocoin, but I receive the following error :
Error CL_MEM_OBJECT_ALLOCATION_FAILURE when calling clEnqueueNDRangeKernel for kernel 0 for DeviceID 4 (Thread
a LOT!
I first started the miner with intensity 0 and saw at the beginning that it was automatically set @ 51, so I lowered it to 40, but I still receive a lot of those errors. Now I am currently trying it out with i30 and the miners seems to be kinda stable, will report after a couple of hours.

[doktor83]

Tried mining Sumocoin, but I receive the following error :
Error CL_MEM_OBJECT_ALLOCATION_FAILURE when calling clEnqueueNDRangeKernel for kernel 0 for DeviceID 4 (Thread
a LOT!
I first started the miner with intensity 0 and saw at the beginning that it was automatically set @ 51, so I lowered it to 40, but I still receive a lot of those errors. Now I am currently trying it out with i30 and the miners seems to be kinda stable, will report after a couple of hours.

https://bitcointalk.org/index.php?topic=3167363.msg32748623#msg32748623

Read third tip

[Kaezar]

Hello everyone!
Thanks to the dev for the great job.

I have some question about Haven mining (cn heavy).

I run a 6 gpu (Vega 64 8mb) rig with srbminer to mine haven.
It seems that my hashrate is not optimal comparing to others reporting 1500+ h/s using Vega 64 or 54 with xmr-stak.

I only get around 950h/s per gpu (max 1400 but drowning quickly)...
I also get some miner crash quite often.
I wonder if i do something wrong with the settings or if it is a miner/gpu limits...

The best hashrate i get comes with this settings.
-algo: heavy
-pool use ssl/tls: false
-target temperature: 0
-"intensity 55"
-i use cryptoknight pool (luckypool gave me the same result).

gpu config
-Intensity 150 for each gpu, double thread "true"

-Virtual memory on my computer 30000-60000
-On afterburner: coreclock 950, memory 1020

I get around 900-950 h/s per card with thoses settings (and was the best i could hit), wich seems to be low according to others

Does anyone have any idea of what i did wrong, or if it is srbminer limits?

Thanks a lot!

I use SRBMiner... in v56-64 plays with worksize 5-12.
mem 1105/1200.
try diff worksize with diff cards. ex..

Code:

	{ "id" : 0, "intensity" : 61, "worksize" : 8, "threads" : 2},
	{ "id" : 1, "intensity" : 61, "worksize" : 7, "threads" : 2},
	{ "id" : 2, "intensity" : 61, "worksize" : 10, "threads" : 2},

Code:

[2018-04-11 14:39:24] GPU0:    1551.0 H/S [T: 56c, RPM: 4192]
[2018-04-11 14:39:24] GPU1:    1541.0 H/S [T: 56c, RPM: 4192]
[2018-04-11 14:39:24] GPU2:    1512.0 H/S [T: 55c, RPM: 4560]
[2018-04-11 14:39:24] Total:   4604.0 H/S