|
shaxs
|
 |
March 12, 2014, 07:34:28 PM |
|
Can someone explain to me the stats and what each column means in the Miner Status tab or point me somewhere it mentions it? Also, how do we calculate the total % of hardware errors? Looking at this https://bitcointalk.org/index.php?topic=348327.msg3745184#msg3745184 it did the following: HW / ( HW + DiffA + DiffR) = total percentage of hardware errors. Is this correct? |
|
|
|
|
|
|
|
|
|
|
|
The network tries to produce one block per 10 minutes. It does this by automatically adjusting how difficult it is to produce blocks.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
shaxs
|
|
March 12, 2014, 08:53:14 PM |
|
Hey thanks! So overclocking to get 200 gh/s results in 2.8% hardware error. Not great for me... 6744 / (226556 + 383 + 6744) = .02885 * 100 = 2.88. I will mess with it when I get back into town. Random question. Do the settings like password and network settings reset when the Antminer loses power? |
|
|
|
|
|
daddyfatsax
|
|
March 12, 2014, 08:53:56 PM |
|
Hey thanks! So overclocking to get 200 gh/s results in 2.8% hardware error. Not great for me... 6744 / (226556 + 383 + 6744) = .02885 * 100 = 2.88. I will mess with it when I get back into town. Random question. Do the settings like password and network settings reset when the Antminer loses power? Only if you hard reset it. Not actually sure how to do that. |
|
|
|
|
|
mdopro1
|
|
March 12, 2014, 08:56:12 PM |
|
I want to OC my ant S1s to something in between 350 and 375. Can anyone help with what settings I should run it on?
|
New Bitcoin fund doubling platform has launched! Receive Automated Payment Every 2 Hours Appealing alternative with Sophisticated algorithms. https://Btc-Funds.com |
|
|
|
shaxs
|
|
March 12, 2014, 09:00:25 PM |
|
Hey thanks! So overclocking to get 200 gh/s results in 2.8% hardware error. Not great for me... 6744 / (226556 + 383 + 6744) = .02885 * 100 = 2.88. I will mess with it when I get back into town. Random question. Do the settings like password and network settings reset when the Antminer loses power? Only if you hard reset it. Not actually sure how to do that. Weird.. when I modified the asic-freq file and then did a reboot in the control panel, it lost connection. I had to turn off the PSU and turn the Ant back on. My frequency changes, pool settings were the same. But password and network were reverted back to default. |
|
|
|
|
|
jjj0923
|
|
March 12, 2014, 11:05:55 PM |
|
I'm overclocked to 200 and I don't get any hardware errors...
my unit is brand new
jeff
|
|
|
|
DumaDoo
Newbie
 Offline
Activity: 31
Merit: 0
|
|
March 13, 2014, 01:06:17 AM |
|
I'm overclocked to 200 and I don't get any hardware errors...
my unit is brand new
jeff
Very Lucky!! You have a perfect Antminer  |
|
|
|
|
|
luck5
|
|
March 13, 2014, 11:36:00 AM |
|
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy! I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong? I try to give you all the infos abput my connection I have a router plugged into my modem, and pc is online through wifi i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default then i set the pools. But it doesnt work If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x? i hope i gave u all the infos to find the error, i thank in advance whoever will lose some time trying to help me!   |
|
|
|
|
|
Darthswan
|
|
March 13, 2014, 11:50:08 AM |
|
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy! I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong? I try to give you all the infos abput my connection I have a router plugged into my modem, and pc is online through wifi i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default then i set the pools. But it doesnt work If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x? i hope i gave u all the infos to find the error, i thank in advance whoever will lose some time trying to help me! Custom Dns needs to be at 8.8.8.8 |
|
|
|
|
freebit13
|
|
March 13, 2014, 12:04:09 PM |
|
Weird.. when I modified the asic-freq file and then did a reboot in the control panel, it lost connection. I had to turn off the PSU and turn the Ant back on. My frequency changes, pool settings were the same. But password and network were reverted back to default.
If you change settings in the gui, you need to make sure you select "save & apply" or it won't actually save the settings to file and they will be lost when it reboots. If you just click save, you'll notice some red text in the top right corner, clicking that takes you to a page listing all the changes that still need to be applied to file. |
Decentralize EVERYTHING!
|
|
|
|
freebit13
|
|
March 13, 2014, 12:06:44 PM |
|
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy! I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong? I try to give you all the infos abput my connection I have a router plugged into my modem, and pc is online through wifi i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default then i set the pools. But it doesnt work If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x? i hope i gave u all the infos to find the error, i thank in advance whoever will lose some time trying to help me! I can't really read Italian(?), but there's a 192.168.0.111 in there that should probably be 192.168. 1.111 |
Decentralize EVERYTHING!
|
|
|
|
luck5
|
|
March 13, 2014, 12:12:29 PM |
|
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy! I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong? I try to give you all the infos abput my connection I have a router plugged into my modem, and pc is online through wifi i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default then i set the pools. But it doesnt work If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x? i hope i gave u all the infos to find the error, i thank in advance whoever will lose some time trying to help me! I can't really read Italian(?), but there's a 192.168.0.111 in there that should probably be 192.168. 1.111 that's the wifi config |
|
|
|
|
|
freebit13
|
|
March 13, 2014, 01:49:34 PM |
|
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy! I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong? I try to give you all the infos abput my connection I have a router plugged into my modem, and pc is online through wifi i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default then i set the pools. But it doesnt work If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x? i hope i gave u all the infos to find the error, i thank in advance whoever will lose some time trying to help me! I can't really read Italian(?), but there's a 192.168.0.111 in there that should probably be 192.168. 1.111 that's the wifi config OK, then I guess you need to change the IP of your miner to 192.168. 0.99, so it is on the same subnet as your router and then it should pick up the internet. After that you'll need to change the IP of your PC to 192.168.0.XX to be able to reconnect to the miner and the internet. |
Decentralize EVERYTHING!
|
|
|
|
luck5
|
|
March 13, 2014, 04:16:23 PM |
|
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy! I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong? I try to give you all the infos abput my connection I have a router plugged into my modem, and pc is online through wifi i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default then i set the pools. But it doesnt work If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x? i hope i gave u all the infos to find the error, i thank in advance whoever will lose some time trying to help me! I can't really read Italian(?), but there's a 192.168.0.111 in there that should probably be 192.168. 1.111 that's the wifi config OK, then I guess you need to change the IP of your miner to 192.168. 0.99, so it is on the same subnet as your router and then it should pick up the internet. After that you'll need to change the IP of your PC to 192.168.0.XX to be able to reconnect to the miner and the internet. but if i plug the miner directly into the modem, which is x.x.1.x, it doesnt work as well btw, thanks |
|
|
|
|
|
freebit13
|
|
March 13, 2014, 05:15:06 PM |
|
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy! I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong? I try to give you all the infos abput my connection I have a router plugged into my modem, and pc is online through wifi i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default then i set the pools. But it doesnt work If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x? i hope i gave u all the infos to find the error, i thank in advance whoever will lose some time trying to help me! I can't really read Italian(?), but there's a 192.168.0.111 in there that should probably be 192.168. 1.111 that's the wifi config OK, then I guess you need to change the IP of your miner to 192.168. 0.99, so it is on the same subnet as your router and then it should pick up the internet. After that you'll need to change the IP of your PC to 192.168.0.XX to be able to reconnect to the miner and the internet. but if i plug the miner directly into the modem, which is x.x.1.x, it doesnt work as well btw, thanks The fact that your comp is connected via wifi to the router and has the ip of 192.168.0.111, leads me to believe that that is what your router is assigning, so you need to change your miner to 192.168.0.99 so that it is on the same subnet, or you need to log in to your router and change it so that it assigns 192.168.1.xx to your network and you won't need to change the miner. When you plugged the S1 into your pc, they were on the same subnet because you set that on your pc's lan ipv4, but your modem is on a different subnet because your Wifi is getting a different address automatically from the router. Your miner needs to be on the same subnet as the wifi to connect to the router and access the internet. Once they are all on the same subnet, you can connect the miner to the router and still access it from the PC, but only if they are on the same subnet. |
Decentralize EVERYTHING!
|
|
|
|
luck5
|
|
March 13, 2014, 07:01:56 PM |
|
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy! I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong? I try to give you all the infos abput my connection I have a router plugged into my modem, and pc is online through wifi i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default then i set the pools. But it doesnt work If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x? i hope i gave u all the infos to find the error, i thank in advance whoever will lose some time trying to help me! I can't really read Italian(?), but there's a 192.168.0.111 in there that should probably be 192.168. 1.111 that's the wifi config OK, then I guess you need to change the IP of your miner to 192.168. 0.99, so it is on the same subnet as your router and then it should pick up the internet. After that you'll need to change the IP of your PC to 192.168.0.XX to be able to reconnect to the miner and the internet. but if i plug the miner directly into the modem, which is x.x.1.x, it doesnt work as well btw, thanks The fact that your comp is connected via wifi to the router and has the ip of 192.168.0.111, leads me to believe that that is what your router is assigning, so you need to change your miner to 192.168.0.99 so that it is on the same subnet, or you need to log in to your router and change it so that it assigns 192.168.1.xx to your network and you won't need to change the miner. When you plugged the S1 into your pc, they were on the same subnet because you set that on your pc's lan ipv4, but your modem is on a different subnet because your Wifi is getting a different address automatically from the router. Your miner needs to be on the same subnet as the wifi to connect to the router and access the internet. Once they are all on the same subnet, you can connect the miner to the router and still access it from the PC, but only if they are on the same subnet. Thanks, yes i had to set all to x.x.0.x It's working now and happily mining BUT, trying wth the second one, when i connect to its ip it gives me this nice message... /usr/lib/lua/luci/dispatcher.lua:211: /etc/config/luci seems to be corrupt, unable to find section 'main' stack traceback: [C]: in function 'assert' /usr/lib/lua/luci/dispatcher.lua:211: in function 'dispatch' |
|
|
|
|
loneknives
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 13, 2014, 07:29:09 PM |
|
anyone know the value for 365mhz and 370mhz?
just want to test it it out
|
|
|
|
|
|
freebit13
|
|
March 13, 2014, 07:56:33 PM |
|
Thanks, yes i had to set all to x.x.0.x It's working now and happily mining BUT, trying wth the second one, when i connect to its ip it gives me this nice message... /usr/lib/lua/luci/dispatcher.lua:211: /etc/config/luci seems to be corrupt, unable to find section 'main' stack traceback: [C]: in function 'assert' /usr/lib/lua/luci/dispatcher.lua:211: in function 'dispatch' Great to hear you're up an running You're probably getting this because it's conflicting with the other miner if you have not changed the ip address. You need to change the ipv4 if the first miner to 192.168.0. 98, so that you can connect the second one. Each device needs a unique ip address on the network. |
Decentralize EVERYTHING!
|
|
|
|
luck5
|
|
March 13, 2014, 08:04:47 PM |
|
Yes i changed the first one to x.x.0.101, and its plugged into my router
im connecting now the s1 directly to the pc with ethernet cable, and its ip is x.x.1.99.
i changed the net settings (s1-pc) to x.x.1.x to open s1 ip address with browser, it shows the starting page and then that message
|
|
|
|
|
|
