GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[farfui]

ZelCash hardfork on July 2, 2019

[Zminer777]

Do you plan to support GRIN mid-July hard fork?

sure, we will support beam and grin hard forks.

[onopko9320]

Do you plan to support GRIN mid-July hard fork?

sure, we will support beam and grin hard forks.

I don't see any grin speed improvement

1080ti 75pl +100core +600memory 7.6gs

2070 80pl +100core +1200 memory 7.6gs

[Zminer777]

GMiner v1.47 available for download

v1.47
+ significant performance improvements for VDS

Performance on stock GPU settings:
Palit GTX 1060 JetStream 6GB ~14 KSol/s
Gigabyte GTX 1660 Ti OC 6GB ~19.5 KSol/s
Palit GTX 1070 Dual 8GB ~19.7 KSol/s
Palit GTX 1070 Ti JetStream 8GB ~23.1 KSol/s
MSI GTX 1080 SEA HAWK EK X 8GB ~27 KSol/s
Gigabyte GTX 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~37.3 KSol/s
Palit RTX 2060 Dual 6GB ~24 KSol/s
MSI RTX 2070 Armor 8GB ~28.5 KSol/s
MSI RTX 2080 DUKE 8GB ~36.5 KSol/s

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
GitHub: https://github.com/develsoftware/GMinerRelease/releases/tag/1.47

[AlecMe]

I don't see any grin speed improvement

1080ti 75pl +100core +600memory 7.6gs

2070 80pl +100core +1200 memory 7.6gs

[/quote]

Do your GPU's work stable with those settings?

I barely get 7gs from 1080ti and 6.5 from 2070

[xlockdownx]

Can someone share thier stable overclocks for Cuckoo31 on 1080ti and 2080ti ??
Thx!!!

[cirlama]

1080ti, I use +115 clock + 475 mem for grin31 (I vary power 75 to 85%)

[cirlama]

Hi all,
what pool are you using for Vollar / VDS?

[xlockdownx]

1080ti, I use +115 clock + 475 mem for grin31 (I vary power 75 to 85%)

THX!!!

[Kilverline]

How to mine zhash 144_5 with only nvidia. I have 2 nvidia and 1 card amd i dont know how remove it.

[Zminer777]

How to mine zhash 144_5 with only nvidia. I have 2 nvidia and 1 card amd i dont know how remove it.

pass "--opencl 0" to miner to disable amd cards.

[rainbowminer]

Hi,

I like gminer very much, but have stumbled over a problem, since some versions (probably since v1.35):

Sometimes Gminer just stops at the startup and hangs (almost) idle. It looks like it tries to calculate something on the GPUs (MSI Afterburner shows active memory and core clock), but the temperature remains low.

This is what you get:

Code:

+----------------------------------------------------------------+
|                          GMiner v1.47                          |
+----------------------------------------------------------------+
Algorithm:          Equihash + Scrypt "VDS"
Stratum server:     
  host:             stratum://vds-eu.uupool.cn:13032
  user:             
  password:         x
Power calculator:   on
Color output:       on
Watchdog:           off
API:                http://127.0.0.1:32900
Log to file:        off
Selected devices:   GPU0
Intensity:          100 
Temperature limits: 90C 
------------------------------------------------------------------

(user address removed)

Then, the miner just waits forever and you need to Ctrl+C or kill it.

This is what I have tried:

• enabling watchdog did not help
• disabling power calculator did not help
• lower overclocking frequencies did not help
• start with/without admin privileges did not change a thing
• it happens for all algorithms
• no matter if only one GPU or multiple GPUs are in use.
• If I enable logfiles, the log file is being created, but remains empty.
• it happens more often, if you start miner.exe as subprocess (e.g. if using powershell's "Start-Process" command)
• gminer is the only miner, out of a bunch of others, that behaves like that
• now comes the weird thing: if miner.exe fails as subprocess in powershell and does not fail, when then called by hand in a cmd window (using the exact same command line arguments), it afterwards does not fail anymore when called as subprocess in powershell.

Any idea, what is happening? Please fix this. Also, if you need assistance in debugging, please let me know.


@cirlama : I have added UUpool.cn to RainbowMiner for VDS mining.

[somaton]

yes, i have seen that problem many times - miner after start is doing nothing, you have to kill it and start again. After that it is working fine again. I reported about it some time ago, but that bug is still there.

[Zminer777]

Hi,

I like gminer very much, but have stumbled over a problem, since some versions (probably since v1.35):

Sometimes Gminer just stops at the startup and hangs (almost) idle. It looks like it tries to calculate something on the GPUs (MSI Afterburner shows active memory and core clock), but the temperature remains low.

This is what you get:

Code:

+----------------------------------------------------------------+
|                          GMiner v1.47                          |
+----------------------------------------------------------------+
Algorithm:          Equihash + Scrypt "VDS"
Stratum server:     
  host:             stratum://vds-eu.uupool.cn:13032
  user:             
  password:         x
Power calculator:   on
Color output:       on
Watchdog:           off
API:                http://127.0.0.1:32900
Log to file:        off
Selected devices:   GPU0
Intensity:          100 
Temperature limits: 90C 
------------------------------------------------------------------

(user address removed)

Then, the miner just waits forever and you need to Ctrl+C or kill it.

This is what I have tried:

• enabling watchdog did not help
• disabling power calculator did not help
• lower overclocking frequencies did not help
• start with/without admin privileges did not change a thing
• it happens for all algorithms
• no matter if only one GPU or multiple GPUs are in use.
• If I enable logfiles, the log file is being created, but remains empty.
• it happens more often, if you start miner.exe as subprocess (e.g. if using powershell's "Start-Process" command)
• gminer is the only miner, out of a bunch of others, that behaves like that
• now comes the weird thing: if miner.exe fails as subprocess in powershell and does not fail, when then called by hand in a cmd window (using the exact same command line arguments), it afterwards does not fail anymore when called as subprocess in powershell.

Any idea, what is happening? Please fix this. Also, if you need assistance in debugging, please let me know.


@cirlama : I have added UUpool.cn to RainbowMiner for VDS mining.

Hi,

By default miner try initialize cuda and opencl platform.
If you have only nvidia cards try disable opencl platform initialization by passing "--opencl 0", hope it help you.

Best Regards

[rainbowminer]

Thank you for your reply.

I already always pass both "--cuda 1 --opencl 0" when used on Nvidia and "--cuda 0 --opencl 1" when used on AMD - so, no, that does not help.

[Kilverline]

How to mine zhash 144_5 with only nvidia. I have 2 nvidia and 1 card amd i dont know how remove it.

pass "--opencl 0" to miner to disable amd cards.

Thank you for help.

[onopko9320]

I don't see any grin speed improvement

1080ti 75pl +100core +600memory 7.6gs

2070 80pl +100core +1200 memory 7.6gs

Do your GPU's work stable with those settings?

I barely get 7gs from 1080ti and 6.5 from 2070
[/quote]Yes, more people can't see any improvements/

[Wotan Wipeout]

If you are on Windows,

set manually with Afterburner:

1080ti: Core 1860, Voltage 0.931, Ram 5600 Mhz --> 8.3 with Grin

I dont have a 2070, but the 2080 can go over 10 with Grin.

Enjoy

(Avoid to tell PL +x: There are different powerlevel, even different ram clocks)

[igorsantos]

how much memory is required for this Equihash 125.4 (ZelCash) algorithm?

[crairezx20]

This is what I have tried:

• enabling watchdog did not help
• disabling power calculator did not help
• lower overclocking frequencies did not help
• start with/without admin privileges did not change a thing
• it happens for all algorithms
• no matter if only one GPU or multiple GPUs are in use.
• If I enable logfiles, the log file is being created, but remains empty.
• it happens more often, if you start miner.exe as subprocess (e.g. if using powershell's "Start-Process" command)
• gminer is the only miner, out of a bunch of others, that behaves like that
• now comes the weird thing: if miner.exe fails as subprocess in powershell and does not fail, when then called by hand in a cmd window (using the exact same command line arguments), it afterwards does not fail anymore when called as subprocess in powershell.

Any idea, what is happening? Please fix this. Also, if you need assistance in debugging, please let me know.


@cirlama : I have added UUpool.cn to RainbowMiner for VDS mining.

How about your virtual memory? Did you set the virtual memory? This is sometimes the issue if you are having problem running this miner. You need to set the virtual memory to 32 to 64 gb to make it work.

Also, check your ram memory used on taskbar and maybe you don't have enough memory.