JACKSEG
Newbie
Offline
Activity: 63
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 01:07:13 PM |
|
Hello,
Excuse my english. I live in Switzerland and I have 2 rates for electricity. One for the day and one for the night. Would it be possible to adjust the GPU power (since Afterburner) according to a schedule?
For example: 6h00-20h59: Power 90% 21h00-5h59: Power 110%
Thanks a lot. Jack
|
|
|
|
natminer
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 05:37:06 PM |
|
A couple of requests for the Web server/site:
1) I enabled authentication (so it's password protected). Is there a way to set a longer timeout until the session expires? On my cell phone when I check the web page I don't want to have to enter my username and password again. Maybe every 24 hours is OK? Not sure what current timeout is but I believe I checked it on my cell this morning, and then about 6 hours later and it asked for a login.
2) Can the website also display the current pricing of BTC, ETH, etc like the app displays at the bottom?
Thanks for the consideration.
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3416
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 08:51:16 PM |
|
Another idea maybe for now, I haven't tried it and maybe if anyone is doing this they can post their ideas too, but I think there is a command line tool for NVidia cards... so maybe we can create a batch file with the commands for that tool to set the cards to our prefered mem/core/power settings, and link that .bat file to the particular mining profile as a .bat to run before starting the miner? Would this work?
That concept could work. But it will be much better once I've implemented support for setting these GPU Clocking Profiles.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3416
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 09:08:19 PM |
|
tried it again same results posting screen shots this time ... WITH CM Miner ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F24o13g2.png%3F1&t=665&c=LxCgSOqdxVSKzQ) Shows the GTX as a RX 470 using using EWBF ZEC miner ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FMDN16Fg.png%3F1&t=665&c=ZiM0YjGOoMtKoA) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FDgFSu3f.png%3F1&t=665&c=wnfkGsP2QsraYQ) O yea i even tired making it device 0 on the RIG and the AMD drivers wouldn't install, when i did,I may know how to fix that and have a dumbly plug coming that should do it, i hope .. . I'd rather use all AMD cards but wanted to try a NV GTX card ... may buy more .. May be add some kind of check mark that can exclude a miner from a list, so the other miner software can pick it up ? . Is that Possible ? ..I know that's a lot of work but should also be fun to figure out ... I don't care if it reads it wrong, i can turn it off on the GTX card but then the other Issue happens, i think because it does read it wrong, awesome makes it go dead over time and it stops hashing but keeps showing temps etc ...just doesn't hash and only happen so far using two different soft ware miners on the same rig with a mix of AMD and NV cards ....I'm guessing at this point . Some of the screenshots above were not loading properly. Also, Awesome Miner will never make a device go dead or make it stop hashing. That's totally in control of the Claymore miner to do that. Awesome Miner is just displaying you what's going on. I do have a system where I mix AMD and nVidia running Claymore Ethereum miner, and that works fine. However, it's only a single of each GPU. Can you share the missing screenshots and I might be able to answer more of your questions. Thanks!
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3416
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2017, 09:10:54 PM |
|
Hello,
Excuse my english. I live in Switzerland and I have 2 rates for electricity. One for the day and one for the night. Would it be possible to adjust the GPU power (since Afterburner) according to a schedule?
For example: 6h00-20h59: Power 90% 21h00-5h59: Power 110%
Thanks a lot. Jack
Hi Jack, This is not possible today, but I'm getting many similar requests on this right now. What I will have in future releases in some kind of GPU Clocking Profile. You should then be able to configure a specific miner to load the profile when the mining is starting, but also let you control these profiles by the Rules in Awesome Miner. If there was a GPU Clocking action, that set a GPU Clocking Profile on the miners, you would be able to define you own rule to trigger change of GPU Clocking Profiles on specific times of the day. Again, this is not supported today, but what I'm planning to do.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
nostrakhan
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 20, 2017, 04:12:02 AM |
|
What exactly do I need to do to get the "Revenue" section to work properly? Here's a screenshot of what appears for me: http://prntscr.com/fluchsThank you!
|
|
|
|
khe-med
Newbie
Offline
Activity: 57
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 20, 2017, 05:11:16 AM |
|
hi, can you help me please. i am use Awesomeminer for mining ethereum in NanoPool, it's work. but musicoin and ubiq not work. Show me this message in claymore: this for ubiq ETH: Authorization failed : {"id":2,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Invalidlogin"}} Stratum - reading socket failed 10038, disconnect ETH: Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'us.ubiqpool.io' <45.76.9.36> port 8008 ETH: Stratum - Connected (us.ubiqpool.io:8008) ETH: Authorization failed : {"id":2,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Invalidlogin"}} Stratum - reading socket failed 10038, disconnect ETH: Job timeout, disconnect, retry in 20 sec... GPU0 t=56C fan=60% this for musicoin ETH: Stratum - Connected (musicoin.miningclub.info:8558) ETH: Authorization failed : {"id":2,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Invalidlogin"}} Stratum - reading socket failed 10038, disconnect ETH: Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'musicoin.miningclub.info' <51.255.193.7> port 8558 ETH: Stratum - Connected (musicoin.miningclub.info:8558) ETH: Authorization failed : {"id":2,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Invalidlogin"}} Stratum - reading socket failed 10038, disconnect ETH: Job timeout, disconnect, retry in 20 sec... GPU0 t=54C fan=56% ubia Pool: http://ubiqpool.io/musicoin Pool: http://musicoin.miningclub.info
|
|
|
|
bensam1231
Legendary
Offline
Activity: 1750
Merit: 1024
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 20, 2017, 06:50:50 AM Last edit: June 20, 2017, 09:22:43 AM by bensam1231 |
|
Something I am noticing is miner offline notifications don't seem to work properly, same with rig down notifications. I have some rigs that are resetting and it doesn't notice it or it does a few minutes after I get it up and running again. I am using performance mode so there might be some sort of bug in there.
Also please add a auto update for remote services. 'Would you like to update all remote services?' sorta deal.
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3416
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 20, 2017, 05:14:08 PM |
|
What exactly do I need to do to get the "Revenue" section to work properly? Here's a screenshot of what appears for me: http://prntscr.com/fluchsThank you! I'm actually investigating the Hush statistics from whattomine right now. Of all the coin listed in Awesome Miner, it looks like Hush is the only coin with a very low and incorrect revenue value. Awesome Miner doesn't do anything specific for Hush, so this is probably a problem with the API data from whattomine. I will get back with an update once confirmed. For any other coin, this is not an issue.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3416
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 20, 2017, 05:23:43 PM |
|
hi, can you help me please. i am use Awesomeminer for mining ethereum in NanoPool, it's work. but musicoin and ubiq not work. Show me this message in claymore: this for ubiq ETH: Authorization failed : {"id":2,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Invalidlogin"}} Stratum - reading socket failed 10038, disconnect ETH: Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'us.ubiqpool.io' <45.76.9.36> port 8008 ETH: Stratum - Connected (us.ubiqpool.io:8008) ETH: Authorization failed : {"id":2,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Invalidlogin"}} Stratum - reading socket failed 10038, disconnect ETH: Job timeout, disconnect, retry in 20 sec... GPU0 t=56C fan=60% this for musicoin ETH: Stratum - Connected (musicoin.miningclub.info:8558) ETH: Authorization failed : {"id":2,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Invalidlogin"}} Stratum - reading socket failed 10038, disconnect ETH: Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'musicoin.miningclub.info' <51.255.193.7> port 8558 ETH: Stratum - Connected (musicoin.miningclub.info:8558) ETH: Authorization failed : {"id":2,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Invalidlogin"}} Stratum - reading socket failed 10038, disconnect ETH: Job timeout, disconnect, retry in 20 sec... GPU0 t=54C fan=56% ubia Pool: http://ubiqpool.io/musicoin Pool: http://musicoin.miningclub.infoThis is probably more a pool and mining software question than a question about Awesome Miner. I think you need to click the Diagnostics button in Awesome Miner and see what kind of configuration Awesome Miner is providing to the mining software. You can share this information with me over PM and I can have a quick look.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 20, 2017, 06:22:49 PM Last edit: June 20, 2017, 07:13:29 PM by toptek |
|
O yea i even tired making it device 0 on the RIG and the AMD drivers wouldn't install, when i did,I may know how to fix that and have a dumbly plug coming that should do it, i hope .. . I'd rather use all AMD cards but wanted to try a NV GTX card ... may buy more ..
May be add some kind of check mark that can exclude a miner from a list, so the other miner software can pick it up ? .
Is that Possible ? ..I know that's a lot of work but should also be fun to figure out ...
I don't care if it reads it wrong, i can turn it off on the GTX card but then the other Issue happens, i think because it does read it wrong, awesome makes it go dead over time and it stops hashing but keeps showing temps etc ...just doesn't hash and only happen so far using two different soft ware miners on the same rig with a mix of AMD and NV cards ....I'm guessing at this point .
Some of the screenshots above were not loading properly. Also, Awesome Miner will never make a device go dead or make it stop hashing. That's totally in control of the Claymore miner to do that. Awesome Miner is just displaying you what's going on. I do have a system where I mix AMD and nVidia running Claymore Ethereum miner, and that works fine. However, it's only a single of each GPU. Can you share the missing screenshots and I might be able to answer more of your questions. Thanks! Yea my bad i deleted the last two Screen shots off Imgur by mistake my bad and your are right it's not awesome miner or even CM, it's the EWBF ZEC miner doing it .I sent a PM after i found out what it is ... because the NV GTX card works fine if i use CM's eth miner and it lists every thing right .. the Problem with EWBF ZEC miner is it's about the only one worth using that actually runs the NV GTX cards at the right speed but if you get the 46 error code ,I thinki i may have to either make it device one on that rig or make that rig a full NV card rig which I plan to do, working on buying a GTX 1070 in about month and another GTX 1060 in a few days . . but will re post those Screen shots, so you have some idea of how Awesome miner sees it as far as it showing that GTX card as a RX 470 Card that is on device one ..while the GTX card is on device 4 ....only when i mine ZEC .. i may try one of the other software miners again to see if that works and hope it matches EWBF ZEC miner speeds. How i found out it's not AM i loaded the NV GTX card without Awesome an only used the EWBF ZEC miner on that rig with nothing else running and it still went dead but i was able to see the error code 46 or noticed it that way ...
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 20, 2017, 06:45:52 PM Last edit: June 20, 2017, 07:24:13 PM by toptek |
|
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3416
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 20, 2017, 08:06:27 PM |
|
A couple of requests for the Web server/site:
1) I enabled authentication (so it's password protected). Is there a way to set a longer timeout until the session expires? On my cell phone when I check the web page I don't want to have to enter my username and password again. Maybe every 24 hours is OK? Not sure what current timeout is but I believe I checked it on my cell this morning, and then about 6 hours later and it asked for a login.
2) Can the website also display the current pricing of BTC, ETH, etc like the app displays at the bottom?
Thanks for the consideration.
1) I will make a change in next release that may keep the session longer. Please try with next release as well. 2) That feature is not available today
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
natminer
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 01:58:27 AM |
|
I'm not sure if I'm not setting this up correctly or how I can set this up better. I really like the idea of an automated profit-swiching miner, but my tests haven't been good so far. Here is a good example... At one point it was mining Equihash for $56/day: http://i66.tinypic.com/jtt72g.jpgThen it switched, to NeoScript at only $29/day http://i65.tinypic.com/v2tzet.jpgIf this is supposed to be fully automated/managed by AwesomeMiner, why does it switch to (and stay on) something making half the profit? Thanks
|
|
|
|
Jonesy
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 09:07:42 AM |
|
Have just started using awesomeminer, was using nicehash miner. One thing I have noticed is nicehash miner uses 100% of my GPU's but awesomeminer is only using about 75-80% of my GPU power. Is there another setting I can change? Have been looking over it all day and can't find nothing. This is only on Claymore's Dual Ethereum AMD+NVIDIA GPU Miner though, Have changed to only mine Equihash and it goes 100%. Am on the Free version, wanted to get it all working before purchasing it.
Also when ever I start awesomeminer it is always running ETH and Lbry, it never changes. Have been using stock settings in awesomeminer. Thinking it is auto setup for nicehash, do I have to set the pools etc up still for nicehash?
TAI Jonesy
|
|
|
|
natminer
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 04:57:28 PM |
|
For now to mitigate the problem I posted above (the automated profit miner switching to something very unprofitable), I edited the profit profile the miner is using and unchecked all but the algo's my rig should be good at, to prevent it from going to one of the other algos.
I'm having an issue with Claymore however, when the profit miner tries to use Claymore (for ETH or ETC) it complains that -epools is missing. But the profit miner should just be using zpool.ca, so I don't know what the problem is there.
BTW is Skein supported? I don't see that listed in the Algos.
Thanks
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3416
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 09:25:57 PM |
|
Using CM ZEC Miner ... it Shows the GTX 1060 as a RX 470 using EWBF ZEC miner ...
Can you please select the miner, then send me the API report via e-mail using Tools -> API Report. Thanks
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3416
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 09:30:35 PM |
|
For now to mitigate the problem I posted above (the automated profit miner switching to something very unprofitable), I edited the profit profile the miner is using and unchecked all but the algo's my rig should be good at, to prevent it from going to one of the other algos.
I'm having an issue with Claymore however, when the profit miner tries to use Claymore (for ETH or ETC) it complains that -epools is missing. But the profit miner should just be using zpool.ca, so I don't know what the problem is there.
BTW is Skein supported? I don't see that listed in the Algos.
Right now the profit switcher only includes typical hashrates, so depending on mining hardware, clocking, software used and other factors, you probably need to change the hashrates for some algorithms. You also have the option to right click on a miner and select Save hashrate during mining. This can probably be improved in the future, but it's how the current implementation works. As you already found out, you can also disable the algorithms you don't want to use. Can you click the Diagnostics button for the miner having problems starting with Claymore Ethereum mining (the -epools missing issue), and provide me with the output?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3416
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 09:33:40 PM |
|
Have just started using awesomeminer, was using nicehash miner. One thing I have noticed is nicehash miner uses 100% of my GPU's but awesomeminer is only using about 75-80% of my GPU power. Is there another setting I can change? Have been looking over it all day and can't find nothing. This is only on Claymore's Dual Ethereum AMD+NVIDIA GPU Miner though, Have changed to only mine Equihash and it goes 100%. Am on the Free version, wanted to get it all working before purchasing it.
Also when ever I start awesomeminer it is always running ETH and Lbry, it never changes. Have been using stock settings in awesomeminer. Thinking it is auto setup for nicehash, do I have to set the pools etc up still for nicehash?
TAI Jonesy
Do you see any hashrate differences, or is it only GPU load difference? Ethereum Claymore miner has an intensity setting that can be used to stress the GPU a bit more, but I think it will depend on your system if it actually results in better hashrates. For profit switching you need to add a Managed Profit Switcher, where you have the option to only enter your Bitcoin address and get started. See: http://www.awesomeminer.com/help/profitswitching.aspx
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3416
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 09:36:06 PM |
|
Something I am noticing is miner offline notifications don't seem to work properly, same with rig down notifications. I have some rigs that are resetting and it doesn't notice it or it does a few minutes after I get it up and running again. I am using performance mode so there might be some sort of bug in there.
Also please add a auto update for remote services. 'Would you like to update all remote services?' sorta deal.
Can you let me know the configuration of your Offline Detection rule in the Options dialog, Rules section? In the Trigger of that rule, how many seconds are configured as offline tolerance and is it configured to detect if Remote Agent is offline?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
|