BFGMiner 5.5.0: CPU/GPU/FPGA/ASIC mining software, GBT+Stratum, RPC, Linux/Win64

[Buchi-88]

Hello,

you know about when the Bfgminer support the Technobit HEX8A1 miner?

regards

[1714119889]

1714119889

[VoodooServ]

Hello,

you know about when the Bfgminer support the Technobit HEX8A1 miner?

regards

... &  other Technobit hardware.

[Luke-Jr]

Hello,

you know about when the Bfgminer support the Technobit HEX8A1 miner?

regards

... &  other Technobit hardware.

Only support for HEX16A is planned at this time, and possibly only for Mac/Windows since they're incompatible with Linux.
We'll need samples of the newer hardware to support them (although maybe it's possible they use the same interface and would just work).

[Buchi-88]

Have anyone the same problem on the PI?

root@sunwatch:/usr/src# apt-get install bfgminer
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package bfgminer

regards

[Luke-Jr]

Have anyone the same problem on the PI?

root@sunwatch:/usr/src# apt-get install bfgminer
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package bfgminer

regards

I think Raspbian is based on Debian stable, which is too old for Bitcoin stuff.
Usually I just build from source.

[Buchi-88]

THX for your answer, but over source:

configure: error: Could not find HASH_ITER - please install uthash-dev 1.9.4+

but uthash-dev is on the newest version installed?

regards

[Luke-Jr]

THX for your answer, but over source:

configure: error: Could not find HASH_ITER - please install uthash-dev 1.9.4+

but uthash-dev is on the newest version installed?

regards

What version is that?

[Buchi-88]

root@sunwatch:~# apt-get install uthash-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
uthash-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

so i will try a manual installation...

THX

Edit1:

So i have loaded the package but i can't install it??

wget https://launchpad.net/ubuntu/+archive/primary/+files/uthash_1.9.7-1.debian.tar.gz
tar xvf uthash_1.9.7-1.debian.tar.gz
cd debian
??Make??

[Buchi-88]

 "Problem solved":

I have loaded the uthash-dev_1.9-4_all.deb and i installed manually

but i have the next missing package:

configure: error: Could not find jansson library

root@sunwatch:~# sudo apt-get install libjansson-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package libjansson-dev

regards

root@sunwatch:/usr/src# dpkg -i libjansson-dev_2.7-1_armel.deb
Selecting previously deselected package libjansson-dev.
(Reading database ... 30542 files and directories currently installed.)
Unpacking libjansson-dev (from libjansson-dev_2.7-1_armel.deb) ...
dpkg: dependency problems prevent configuration of libjansson-dev:
 libjansson-dev depends on libjansson4 (= 2.7-1); however:
  Package libjansson4 is not installed.
dpkg: error processing libjansson-dev (--install):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 libjansson-dev

[Luke-Jr]

Why are you trying to install debs manually? Did you run aptitude update before starting??

[Luke-Jr]

There is a README file.

[Buchi-88]

There is a README file.

Sorry but no chance to install?

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so( manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/usr/local/share/doc/libbase58'
 /usr/bin/install -c -m 644 AUTHORS COPYING README '/usr/local/share/doc/libbase58'
 /bin/mkdir -p '/usr/local/include'
 /usr/bin/install -c -m 644 libbase58.h '/usr/local/include'
 /bin/mkdir -p '/usr/local/lib/pkgconfig'
 /usr/bin/install -c -m 644 libbase58.pc '/usr/local/lib/pkgconfig'
make[3]: Leaving directory `/usr/src/bfgminer/libbase58'
make[2]: Leaving directory `/usr/src/bfgminer/libbase58'
Making install in libblkmaker
make[2]: Entering directory `/usr/src/bfgminer/libblkmaker'
  CC       libblkmaker_jansson_0.1_la-blkmaker_jansson.lo
blkmaker_jansson.c:13:21: error: jansson.h: No such file or directory
blkmaker_jansson.c:21:3: error: #error "Jansson 2.0 with long long support required!"
blkmaker_jansson.c:24: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
blkmaker_jansson.c:130: error: expected declaration specifiers or '...' before 'json_t'
blkmaker_jansson.c: In function 'parse_txn':
blkmaker_jansson.c:131: error: 'json_t' undeclared (first use in this function)
blkmaker_jansson.c:131: error: (Each undeclared identifier is reported only once
blkmaker_jansson.c:131: error: for each function it appears in.)
blkmaker_jansson.c:131: error: 'vv' undeclared (first use in this function)
blkmaker_jansson.c:133: warning: implicit declaration of function 'json_object_get'
blkmaker_jansson.c:133: error: 'txnj' undeclared (first use in this function)
blkmaker_jansson.c:133: warning: implicit declaration of function 'json_is_string'
blkmaker_jansson.c:135: warning: implicit declaration of function 'json_string_value'
blkmaker_jansson.c: At top level:
blkmaker_jansson.c:174: warning: type defaults to 'int' in declaration of 'json_t'
blkmaker_jansson.c:174: error: expected ';', ',' or ')' before '*' token
blkmaker_jansson.c:280: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
blkmaker_jansson.c:325: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
blkmaker_jansson.c:374: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
blkmaker_jansson.c:378: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
make[2]: *** [libblkmaker_jansson_0.1_la-blkmaker_jansson.lo] Error 1
make[2]: Leaving directory `/usr/src/bfgminer/libblkmaker'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/usr/src/bfgminer'
make: *** [install] Error 2
root@sunwatch:/usr/src/bfgminer#

regards

[Luke-Jr]

All I can say is your OS appears to be broken.

[pekatete]

All I can say is your OS appears to be broken.

He needs to set up the environment before trying to compile bfgminer.

configure: error: Could not find jansson library

root@sunwatch:~# sudo apt-get install libjansson-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package libjansson-dev

regards

root@sunwatch:/usr/src# dpkg -i libjansson-dev_2.7-1_armel.deb
Selecting previously deselected package libjansson-dev.
(Reading database ... 30542 files and directories currently installed.)
Unpacking libjansson-dev (from libjansson-dev_2.7-1_armel.deb) ...
dpkg: dependency problems prevent configuration of libjansson-dev:
 libjansson-dev depends on libjansson4 (= 2.7-1); however:
  Package libjansson4 is not installed.
dpkg: error processing libjansson-dev (--install):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 libjansson-dev

I'd suggest you read the README file and sequentially and carefully follow the instructions section of setting up the developement environment before you try to compile.
I have not done it on rPi, but used BFGMiner instructions for setting up MinGW on windows and it works a treat. All the errors that you are encountering indicate that your environment is not set up correctly, and posting each error as you encounter it may simply bamboozle whoever is trying to help.
I know for sure you'll encounter compilation errors that need Luke-Jr to address, but if you keep crying wolf when there is none, then when that wolf does turn up you may not get the help you require!

[Buchi-88]

All I can say is your OS appears to be broken.

@Luke

THX for your help BIG THX



After a reinstallation of libjansson the BfgMiner run with my BFx2 Bitfury but at the same time the Bfgminer do not scan my:

8 x BFx2 Bitfury
2 x Antminer U2+

??

My settings:

]
,
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:0/0",
"expiry" : "120",
"failover-only" : true,
"log" : "5",
"no-pool-disable" : true,
"queue" : "2",
"scan-time" : "60",
"worktime" : true,
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"scan" : ["antminer:all"],
"set-device" : ["antminer:clock=x0A81"],
"scan" : ["bfx:all"],
"set-device" : ["bfx:osc6_bits=53"]
}

[cuke]

After a reinstallation of libjansson the BfgMiner run with my BFx2 Bitfury but at the same time the Bfgminer do not scan my:

8 x BFx2 Bitfury
2 x Antminer U2+

I'm not familiar with the bfx settings, but

Try this:

Code:

"scan" : [
  "amu:all",
  "bfx:all"
],
"set-device" : [
  "amu:clock=x0a81",
  "bfx:osc6_bits=53"
]

[Buchi-88]

After a reinstallation of libjansson the BfgMiner run with my BFx2 Bitfury but at the same time the Bfgminer do not scan my:

8 x BFx2 Bitfury
2 x Antminer U2+

I'm not familiar with the bfx settings, but

Try this:

Code:

"scan" : [
  "amu:all",
  "bfx:all"
],
"set-device" : [
  "amu:clock=x0a81",
  "bfx:osc6_bits=53"
]

THX

bfgminer version 5.0.0 - Started: [2014-12-07 10:01:14] - [  0 days 00:02:02]
 Manage devices Pool management Settings Display options         Help Quit
 Pool 1: mint.bitminter.com  Diff:16  +Strtm  LU:[10:03:10]  User:Buchinger84.Buchi
 Block #333250: ...11a7df35  Diff:40G (286.4P)  Started: [10:03:08]  I:15.22uBTC/hr
 ST:21  F:0  NB:4  AS:0  BW:[101/ 62 B/s]  E:86.32  BS:746
 10/18        | 37.91/34.76/33.89Gh/s | A:50 R:1+0(2.0%) HW:25/2.6%
---------------------------------------------------------------------------------------
 AMU 0:       |  2.16/ 2.16/ 2.15Gh/s | A: 4 R:0+0(none) HW: 0/none
 AMU 1:       |  2.22/ 2.20/ 2.54Gh/s | A: 5 R:0+0(none) HW: 0/none
 BFX 0:       |  4.03/ 3.69/ 3.52Gh/s | A: 4 R:0+0(none) HW: 1/.99%
 BFX 1:       |  4.42/ 4.10/ 3.77Gh/s | A: 4 R:0+0(none) HW: 1/.93%
 BFX 2:       |  4.01/ 3.70/ 3.04Gh/s | A: 9 R:0+0(none) HW: 0/none
 BFX 3:       |  4.16/ 3.84/ 3.37Gh/s | A: 7 R:1+0( 12%) HW: 0/none
 BFX 4:       |  3.91/ 3.58/ 3.40Gh/s | A: 3 R:0+0(none) HW: 1/1.0%
 BFX 5:       |  4.28/ 3.88/ 4.73Gh/s | A: 7 R:0+0(none) HW: 2/1.5%
 BFX 6:       |  4.11/ 3.80/ 3.94Gh/s | A: 4 R:0+0(none) HW: 2/1.8%
 BFX 7:       |  4.66/ 4.21/ 3.69Gh/s | A: 6 R:0+0(none) HW:18/ 15%
---------------------------------------------------------------------------------------
 [1970-01-01 01:00:33] bfx_open: Failed to open --> ??

[Taugeran]

Hello,

you know about when the Bfgminer support the Technobit HEX8A1 miner?

regards

... &  other Technobit hardware.

Only support for HEX16A is planned at this time, and possibly only for Mac/Windows since they're incompatible with Linux.
We'll need samples of the newer hardware to support them (although maybe it's possible they use the same interface and would just work).

forgive me for forgetting, what is it about them that makes them incompatible with linux?

[Luke-Jr]

Hello,

you know about when the Bfgminer support the Technobit HEX8A1 miner?

regards

... &  other Technobit hardware.

Only support for HEX16A is planned at this time, and possibly only for Mac/Windows since they're incompatible with Linux.
We'll need samples of the newer hardware to support them (although maybe it's possible they use the same interface and would just work).

forgive me for forgetting, what is it about them that makes them incompatible with linux?

I don't entirely remember at this point...
http://comments.gmane.org/gmane.linux.usb.general/97519

[xwtfbobx]

so question, I know that BFG works with the gridseed 5 chip pods for scrypt mining. What about dual mode with the gridseed device?  I am pretty sure the first comment to come my way might very well be why would you want to do that.  I realize profit for sha/scrypt mining on the little buggers is nonexistent. I am just at war with the pc at the moment trying to do it.  currently I am running cpu&cgminer to accomplish this, but it is not getting the results i think it should be.