Now that my work week is down to only 55 hrs I once again have time for Seals but Seals doesn't have time for me I actually like their software because unlike most others available in the US it doesn't put me on tilt. My btc remains there.
|
|
|
How long does it take between requesting to be in the campaign and a decision on being excepted?
You're in since a long time. Thank you. I don't see my name on the google doc.
|
|
|
How long does it take between requesting to be in the campaign and a decision on being excepted?
|
|
|
done!! but wallet it use very a lot of upload bandwidth. I had the same problem, I was using 2>4 Mbps presstab posted the following after responding to you. I downloaded it and set "strictincoming true" that was almost an hour ago and I'm up to 15 peers and bandwith is negligible, CPU usage is also very small I have updated the github release page with a new build of the wallet. It contains new checkpoints and ups the protocol version to 72001 from 72000. I added two rpc commands: strictprotocol strictincomingIf you are having trouble with high CPU and other peers trying to give you wrong chain data, or requesting data continuously the use "strictincoming true"If you still have more problems, you can try strictprotocol. Please do not use this unless you absolutely have to. It will drop your peer count low, and doesn't connect you to the main pool of peers. https://github.com/hyperstake/HyperStake/releases/tag/v1.1
|
|
|
HYP is using 50% of my low end CPU when normally it uses 3%. I guess this is due to it trying to sync with all the fork all the time. It has been >200 blocks behind the fork for hours and trying to sync. I am on the correct chain.
I closed HYP so I could continue to mine Monero as I can't do both efficiently.
Update: I restarted HYP and it is back to using it's usual CPU usage.
|
|
|
HYP is using 50% of my low end CPU when normally it uses 3%. I guess this is due to it trying to sync with all the fork all the time. It has been >200 blocks behind the fork for hours and trying to sync. I am on the correct chain.
I closed HYP so I could continue to mine Monero as I can't do both efficiently.
|
|
|
Even though I hate that idea, that's actually pretty big, too bad they haven't gotten rid of BitLicense still.
I wouldn't be surprised in NY if it ever came to a situation where you'd need to apply for an NY State Bitlicense first before you can pay your NYC fines in bitcoins. Maybe you need to find out what a bitlicense is.
|
|
|
What's the right chain? The one from http://hyp.cryptocoinexplorer.com/ or the longer one? My wallet seems to always want to sync me to the longer one with the 1.1 version. AFAIK it's the one from hyp.cryptocoinexplorer.com with the longer chain being the bad fork. Right now my wallet it also trying to sync with the longer chain and is indicating that it is 232 blocks behind. I have 62 active connections with the network. I have had no trouble staking and no orphans.
|
|
|
Hello I sent HYP 1200 to the address of Poloniex offered me Hyperstake and has not reached me, the transaction is confirmed 1 hour, knows what is the problem? thx
Best to ask Poloniex in the troll box. Transactions are working there but when asked they said, "I am noticing the blocks are coming through a little slower now on HYP. Not much but, a little."
|
|
|
I've been having issues with the wallet ever since upgrading to v1.0.7.3. When I use coin control and combine blocks to send to my address, the coins get tied up in an unconfirmed status until I end up using the check wallet function, then repair wallet. Never had these issues with v1.0.7.2
At this time you must update to v1.1.0 if you want to be on the correct fork! I am. Just addressing issues i've had so Presstab is aware and can look into if needed. No worries. Excellent! Carry on
|
|
|
I've been having issues with the wallet ever since upgrading to v1.0.7.3. When I use coin control and combine blocks to send to my address, the coins get tied up in an unconfirmed status until I end up using the check wallet function, then repair wallet. Never had these issues with v1.0.7.2
At this time you must update to v1.1.0 if you want to be on the correct fork!
|
|
|
wow , GOgogOGo what must do i just see qt v1.1 fork, must update normal? or what to do? i try this after update client 04:14:50  getblock hash 235999 04:14:50  Error: value is type int, expected bool how to know if is running ok? any tip? ok i find integrated block explorer at 235999 giveme this hash e165587140a5965f94cda6869abed770981207a946b4f2de17c8a053747a352e what to do? with this repair?? Block Chain Bootstrap Through block 235,000 - https://www.dropbox.com/s/d1zva60jizzoe3y/bootstrap.zip Usage: extract bootstrap.dat into data directory (for Windows go to "run" and type in %appdata% and find HyperStake folder), remove blkindex.dat and blk0001.dat if they exist already and use the following from command line to start the bootstrap: HyperStake-qt.exe -loadblock=bootstrap.dat Bootstrapping may take an hour or two depending on the machine, please be patient, the bootstrap happens from the splashscreen, and clicking on it while bootstrapping may cause it to quit. Use: getblockhash 235999 no space between getblock & hash
|
|
|
Enrolling,
post count: 968
bit-x BTC address: 36VcT5nV9irna1xr7eXDaBHfqWfyU1U8za
|
|
|
I finally get some fiat and the price goes up. No problem, it's still cheap coins
|
|
|
FWIW I can login with no problem.
|
|
|
I just staked a block while "out of sync" and am now synced.
|
|
|
is there a list of current CPU miners for XMR?
AFAIK simple wallet built into the protocol LucasJones the original miner Wolf optimized LucasJones except for non AES-NI Yam with donation to Yam Claymore with donation to Claymore
|
|
|
I just checked and I am on the same block # so I assume everything is ok there.
Right after checking my wallet said it was out of sync and was synchronizing with the network with 8 blocks remained and then 19 blocks. After a couple of minutes it now says 18 blocks remaining.
It went down to 17 blocks behind and now is at 21 blocks. I am still on the same blockcount as hyp.cryptocoinexplorer.com
Edit#2 will this effect staking?
|
|
|
I recommend that everyone make a backup of their data directory now. This way if you were to miss the fork and couldnt get the wallet to auto reorganize, then you could start from the backup.
Would you please tell this idiot which of the 10 things in my HyperStake folder is the data directory as nothing is labeled with that name. Maybe the database? Windows 8.1 While I'm at it, I backed up my wallet back in October. Is this something I should do on a regular basis? The folder in .appdata Nothing with .appdata The following are in my HyperStake folder with most obviously not it but included for completeness. Me>AppData>Roaming>HyperStake database themes .lock blk0001.dat blkindex.dat db debug HyperStake-qt peers.dat wallet.dat
|
|
|
I recommend that everyone make a backup of their data directory now. This way if you were to miss the fork and couldnt get the wallet to auto reorganize, then you could start from the backup.
Would you please tell this idiot which of the 10 things in my HyperStake folder is the data directory as nothing is labeled with that name. Maybe the database? Windows 8.1 While I'm at it, I backed up my wallet back in October. Is this something I should do on a regular basis?
|
|
|
|