Linux mining distro for the Raspberry PI - MinePeon

[phr33]

Thanks for the update!

I have a local mod I though you would also include in the release. Maybe you have, but I can't see it in git.

The latest cg-miner offer the HW error and reject rate percentage directly. This should remove the difficulty compensation issues once and for all

So in index.php I replaced the HW percentage calculation with:

$hwErrorPercent = ['DeviceHardware%'];



Just a suggestion

Once again thanks!

[1715135645]

1715135645

[1715135645]

1715135645

[1715135645]

1715135645

[1715135645]

1715135645

[1715135645]

1715135645

[tombs]

Downloading now!

[stellan0r]

Update time again!

There are so many changes underneath the hood that the change log is huge (see below for the full details).  You don’t need to re image, but if you don’t your going to be missing out on quite a few improvements, some of which cannot be distributed through the git system.

So, as I am still a noob with this even after 2 years, whats the best way to update from 0.2.2? Just delete everything, install the new version and setup everything again?
Or should I update via console? If so, with which commands to execute in what order?

What has changed (in a nutshell)? Like what user passwords need to be changed? ("root", "minepeon", anything else?)

[netfun2000]

no "sudo screen -r" ?

I've not tested the new release yet, but my understanding is that you have to run 'screen -r' as user minepeon, so try it without the sudo if you are logged in as minepeon.




 

thanks.

run 'screen -r' as user minepeon

[BG4]

***** ATTENTION WEBUI DEVELOPER********





from index.php to settings.php link ....the page is not in color and only has one password area with no confirm....
from advanced.html#/status to advanced.html#/settings    link is in color and has the password confirm area.....

I used the no color settings page and got locked out of WEBUI

[funkymunky]

I've just carried out a fresh install of 0.2.3

Whilst doing this my LCD screen arrived as recommended on this thread.

Following the instructions at https://github.com/cardcomm/cgminerLCDStats/blob/master/MinePeon%20Install.md

On the final section of running

Code:

sudo python2 cgminerLCDStats.py

it states:

Code:

Welcome to cgminerLCDStats
Copyright 2013 Cardinal Communications
Main Exception Handler:
LCD Sys Info device not found

Exception AttributeError: "'LCDSysInfo' object has no attribute 'devh'" in <bound method LCDSysInfo.__del__ of <pylcdsysinfo.LCDSysInfo object at 0xb6659c90>> ignored
Traceback (most recent call last):
  File "cgminerLCDStats.py", line 376, in <module>
    displayErrorScreen(str(e))
  File "cgminerLCDStats.py", line 201, in displayErrorScreen
    display = LCDSysInfo()
  File "/home/minepeon/cgminerLCDStats/pylcdsysinfo.py", line 319, in __init__
    raise IOError("LCD Sys Info device not found")
IOError: LCD Sys Info device not found
Exception AttributeError: "'LCDSysInfo' object has no attribute 'devh'" in <bound method LCDSysInfo.__del__ of <pylcdsysinfo.LCDSysInfo object at 0xb6612d10>> ignored

Is anybody able to help?

Thank you as always

[Nemo1024]

Just for info :
Am getting power issues on the USB again with the new build ( same as when I updated Arch )
It would seem the updated Arch does not like my hub.
I have NOT cut the 5V line on the usb cable (yet) as I never needed to before (it always worked fine on the old Arch) and I could always plug and unplug freely.

Anyway am off to splice some cables.  

P.S Its the red wire is it not ?

Yes.

[kano]

I've just carried out a fresh install of 0.2.3

Whilst doing this my LCD screen arrived as recommended on this thread.

Following the instructions at https://github.com/cardcomm/cgminerLCDStats/blob/master/MinePeon%20Install.md

On the final section of running

Code:

sudo python2 cgminerLCDStats.py

it states:

Code:

Welcome to cgminerLCDStats
Copyright 2013 Cardinal Communications
Main Exception Handler:
LCD Sys Info device not found

Exception AttributeError: "'LCDSysInfo' object has no attribute 'devh'" in <bound method LCDSysInfo.__del__ of <pylcdsysinfo.LCDSysInfo object at 0xb6659c90>> ignored
Traceback (most recent call last):
  File "cgminerLCDStats.py", line 376, in <module>
    displayErrorScreen(str(e))
  File "cgminerLCDStats.py", line 201, in displayErrorScreen
    display = LCDSysInfo()
  File "/home/minepeon/cgminerLCDStats/pylcdsysinfo.py", line 319, in __init__
    raise IOError("LCD Sys Info device not found")
IOError: LCD Sys Info device not found
Exception AttributeError: "'LCDSysInfo' object has no attribute 'devh'" in <bound method LCDSysInfo.__del__ of <pylcdsysinfo.LCDSysInfo object at 0xb6612d10>> ignored

Is anybody able to help?

Thank you as always

You are missing python usb

[funkymunky]

Thank you Kano
However I had installed it as part of the tutorial.

I redid the commands though for its installation and I'm still receiving this error.

Code:

minepeon@minepeon ~/pyusb $ sudo python2 setup.py install
[sudo] password for minepeon:
running install
running build
running build_py
running install_lib
running install_egg_info
Removing /usr/lib/python2.7/site-packages/pyusb-1.0.0a4-py2.7.egg-info
Writing /usr/lib/python2.7/site-packages/pyusb-1.0.0a4-py2.7.egg-info

[kano]

Thank you Kano
However I had installed it as part of the tutorial.

I redid the commands though for its installation and I'm still receiving this error.

Code:

minepeon@minepeon ~/pyusb $ sudo python2 setup.py install
[sudo] password for minepeon:
running install
running build
running build_py
running install_lib
running install_egg_info
Removing /usr/lib/python2.7/site-packages/pyusb-1.0.0a4-py2.7.egg-info
Writing /usr/lib/python2.7/site-packages/pyusb-1.0.0a4-py2.7.egg-info

Ah OK - well I got my 2nd RPi (finally) today and booted it up with my old Raspbian SD and got that same error.
That was my fix that worked.
So must be something else then.

[funkymunky]

Phew, it's not just me then.

Thank you for trying though 

[Gerwin]

How to update or backup form minepeon 0.2.2? I would like to keep statistics.

[yxzq]

How to update or backup form minepeon 0.2.2? I would like to keep statistics.

For stats only: Copy the contents of /opt/minepeon/var and /opt/minepeon/http/rrd
For pools: Copy this file: /opt/minepeon/etc/miner.conf
For settings: Copy this file: /opt/minepeon/etc/minepeon.conf

Copy them to your computer and replace them on a SD with the newest release.

***** ATTENTION WEBUI DEVELOPER********
I used the no color settings page and got locked out of WEBUI

That's a bug indeed. Try to login and leave the password empty.

You can still set the password with the advanced page.

[cardcomm]

Thank you Kano
However I had installed it as part of the tutorial.

I redid the commands though for its installation and I'm still receiving this error.

Code:

minepeon@minepeon ~/pyusb $ sudo python2 setup.py install
[sudo] password for minepeon:
running install
running build
running build_py
running install_lib
running install_egg_info
Removing /usr/lib/python2.7/site-packages/pyusb-1.0.0a4-py2.7.egg-info
Writing /usr/lib/python2.7/site-packages/pyusb-1.0.0a4-py2.7.egg-info

Ah OK - well I got my 2nd RPi (finally) today and booted it up with my old Raspbian SD and got that same error.
That was my fix that worked.
So must be something else then.

I just got up and saw this. I'll write the new version to my extra card in a few minutes and give it a try. It does look like the drivers installed properly. But the OS sure seems to not be seeing it. Do any of the demo apps work?

I'll try and duplicate the issue and post back here.

[teletobi]

Tryin to update via ssh, Following the instructions on github. But it stops when writing "git pull" with following Note:

error: Your local changes to the following files would be overwritten by merge:
   etc/miner.conf.donate
   http/inc/miner.inc.php
Please, commit your changes or stash them before you can merge.
Aborting

As I'm new to this, how can I commit or stash? No need to save setups or stats.

[cardcomm]

Tryin to update via ssh, Following the instructions on github. But it stops when writing "git pull" with following Note:

error: Your local changes to the following files would be overwritten by merge:
   etc/miner.conf.donate
   http/inc/miner.inc.php
Please, commit your changes or stash them before you can merge.
Aborting

As I'm new to this, how can I commit or stash? No need to save setups or stats.

This was sort of covered up-thread a little ways:
https://bitcointalk.org/index.php?topic=137934.msg2948693#msg2948693

Based on that post, I think you would do (but of course you WILL lose changes/setup):

git checkout etc/miner.conf.donate
git http/inc/miner.inc.php
git pull

Not sure of this will work for you though. It might be better to do a fresh install of the new version.

[Gerwin]

How to update or backup form minepeon 0.2.2? I would like to keep statistics.

For stats only: Copy the contents of /opt/minepeon/var and /opt/minepeon/http/rrd
For pools: Copy this file: /opt/minepeon/etc/miner.conf
For settings: Copy this file: /opt/minepeon/etc/minepeon.conf

Copy them to your computer and replace them on a SD with the newest release.

Thanks 

[teletobi]

Tryin to update via ssh, Following the instructions on github. But it stops when writing "git pull" with following Note:

error: Your local changes to the following files would be overwritten by merge:
   etc/miner.conf.donate
   http/inc/miner.inc.php
Please, commit your changes or stash them before you can merge.
Aborting

As I'm new to this, how can I commit or stash? No need to save setups or stats.

This was sort of covered up-thread a little ways:
https://bitcointalk.org/index.php?topic=137934.msg2948693#msg2948693

Based on that post, I think you would do (but of course you WILL lose changes/setup):

git checkout etc/miner.conf.donate
git http/inc/miner.inc.php
git pull

Not sure of this will work for you though. It might be better to do a fresh install of the new version.

Thanks, did a fresh install and is working. I just wanted to try and see if I an do this. Playin and learning, try and error...

[cardcomm]

Thank you Kano
However I had installed it as part of the tutorial.

I redid the commands though for its installation and I'm still receiving this error.

Code:

minepeon@minepeon ~/pyusb $ sudo python2 setup.py install
[sudo] password for minepeon:
running install
running build
running build_py
running install_lib
running install_egg_info
Removing /usr/lib/python2.7/site-packages/pyusb-1.0.0a4-py2.7.egg-info
Writing /usr/lib/python2.7/site-packages/pyusb-1.0.0a4-py2.7.egg-info

Ah OK - well I got my 2nd RPi (finally) today and booted it up with my old Raspbian SD and got that same error.
That was my fix that worked.
So must be something else then.

I just got up and saw this. I'll write the new version to my extra card in a few minutes and give it a try. It does look like the drivers installed properly. But the OS sure seems to not be seeing it. Do any of the demo apps work?

I'll try and duplicate the issue and post back here.

Ok, just got the new version of MinePeon up and running on my test Pi with no miners. I pulled down pyUSB and the cgminerLCDStats code with no other updates. For a quick test, I verified the current code will display properly when pointed at another instance of cgminer on my network. Later I'll transfer the install to my miner Pi, but for now I'm confident the code works on the new version.

It sounds like you need to verify operation of the LCD on another system, if possible. Or maybe check the USB connections at both ends. Basically you're getting the error that occurs when the device can't be found :/

[mameise]

will the lcdstats also work for this lcd?
http://www.adafruit.com/products/946

or what needs to be changed?