peoples
Member
 Offline
Activity: 82
Merit: 11
|
 |
August 07, 2016, 09:52:19 PM |
|
@Claymore with new AMDGPU-PRO (16.30.3) and ubuntu 16.04 (also on 14.04 LTS) following error every second while mining. Aug 6 03:02:46 114d7b kernel: [ 60.412106] VM fault (0x01, vmid 6) at page 135290808, read from 'TC0' (0x54433000) (8)
Aug 6 03:02:46 114d7b kernel: [ 60.412109] amdgpu 0000:01:00.0: GPU fault detected: 147 0x0df8c401
Aug 6 03:02:46 114d7b kernel: [ 60.412617] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105FBC
Aug 6 03:02:46 114d7b kernel: [ 60.413136] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001
Aug 6 03:02:46 114d7b kernel: [ 60.413648] VM fault (0x01, vmid 6) at page 135290812, read from 'TC4' (0x54433400) (72)
Aug 6 03:02:46 114d7b kernel: [ 60.413651] amdgpu 0000:01:00.0: GPU fault detected: 147 0x0de08401
Aug 6 03:02:46 114d7b kernel: [ 60.414160] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105FBF
Aug 6 03:02:46 114d7b kernel: [ 60.414679] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C084001
Aug 6 03:02:46 114d7b kernel: [ 60.415189] VM fault (0x01, vmid 6) at page 135290815, read from 'TC7' (0x54433700) (132)
is this something you can fix in your miner ? Cause genoils ethminer ( https://github.com/Genoil/cpp-ethereum/tree/110 ) adressed this issue in his miner. thanks regards |
|
|
|
|
|
|
|
|
|
If you see garbage posts (off-topic, trolling, spam, no point, etc.), use the "report to moderator" links. All reports are investigated, though you will rarely be contacted about your reports.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
Boojapho
Newbie
Offline
Activity: 15
Merit: 1
|
|
August 07, 2016, 09:56:44 PM |
|
When trying to use CDM solo with the Parity client (version 1.2.3), I am getting a JSON error when it calls eth_GetWork. Below is the log. Anyone have any ideas what could be going wrong? I've tried -esm settings but they did not help. 17:43:13:974 125c ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
17:43:13:990 125c º Claymore's Dual ETH + DCR/SC AMD GPU Miner v5.3 Beta º
17:43:13:990 125c ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
17:43:13:990 125c
17:43:14:224 125c ETH: 1 pool is specified
17:43:14:224 125c Main Ethereum pool is localhost:8545
17:43:14:224 125c DCR: 1 pool is specified
17:43:14:240 125c Main Decred pool is stratum.decredpool.org:3333
17:43:21:962 125c OpenCL platform: AMD Accelerated Parallel Processing
17:43:21:962 125c
Cards available: 2
17:43:21:962 125c GPU #0: name: Hawaii, 4096 MB available, 44 compute units
17:43:21:962 125c GPU #1: name: Hawaii, 4096 MB available, 44 compute units
17:43:21:962 125c Total cards: 2
17:43:21:977 125c Initializing...
17:43:21:977 125c GPU #0 recognized as Radeon 290X
17:43:21:977 125c GPU #1 recognized as Radeon 290X
17:43:21:977 125c POOL/SOLO version
17:43:21:977 125c b176
17:43:21:993 125c start building OpenCL program...
17:43:24:848 125c done
17:43:24:848 125c GPU #0: set -etha as 0 (ETH algo for fast cards)
17:43:24:848 125c GPU #1: set -etha as 0 (ETH algo for fast cards)
17:43:25:113 96c ETH - connecting to localhost:8545
17:43:25:113 96c http send request: {"method": "eth_getWork", "params": [], "id":0}
17:43:25:144 96c http got answer: {"jsonrpc":"2.0","error":{"code":-32600,"message":"Invalid request","data":null},"id":null}
17:43:25:144 96c ETH: Connected (localhost:8545)
17:43:25:144 96c parse packet: 91
17:43:25:144 96c ETH: Received error: {"jsonrpc":"2.0","error":{"code":-32600,"message":"Invalid request","data":null},"id":null}
|
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
August 07, 2016, 10:02:39 PM |
|
@Claymore with new AMDGPU-PRO (16.30.3) and ubuntu 16.04 (also on 14.04 LTS) following error every second while mining. is this something you can fix in your miner ? Cause genoils ethminer ( https://github.com/Genoil/cpp-ethereum/tree/110 ) adressed this issue in his miner. thanks regards I don't like Linux. If you know how Genoil fixed it, let me know and I will do the same. But I will not install "AMDGPU-PRO (16.30.3) and ubuntu 16.04 (also on 14.04 LTS)" to try to reproduce it and then try to find the reason, sorry. When trying to use CDM solo with the Parity client (version 1.2.3), I am getting a JSON error when it calls eth_GetWork. Below is the log. Anyone have any ideas what could be going wrong? I've tried -esm settings but they did not help.
Probably, solo with Parity is not supported currently. I tried to install latest client, but it even does not want to download blockchain for some reason (spent a couple of hours with no success), so I cannot check the reason. |
|
|
|
|
TR8888
|
|
August 07, 2016, 11:34:25 PM |
|
We appreciate your work Claymore.
|
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4326
Merit: 3530
what is this "brake pedal" you speak of?
|
|
August 08, 2016, 12:29:47 AM |
|
Good info. may be why I could get the 16x - 8x slots working but not the 1x. Would be nice to fill the rig beyond 4 cards. Thanks.. will give it a try.
You're welcome. I believe it's the same for you as well with only 4 cards. Switching it to x8/x4/x4 should get the job done. I would not have known either without a good friend of mine providing the info. EDIT: Not sure of what mobo you have. Don't forget to "save" the settings after you change them before exiting out of it. Blind leading the blind-  Changing the 16x slots to 8/4/4 will do absolutely nothing for this problem. There are a lot of things that can cause that issue but that is not it. The lanes are decided by the mobo and more importantly the Chipset on the mobo. What mobo is being used? Also what type of risers are being used? Have you tried reinstalling the driver with all the GPU's connected? Have you looked in the Device Manager to see how many are being recognized? some mobos will disable certain slots depending on what other slots are used. for example my gigabyte z97x mobo will disable the 3 x1 slots if the x4 (x16 physical) slot has a card in it. |
|
|
|
|
ichigominer
Newbie
Offline
Activity: 1
Merit: 0
|
 |
August 08, 2016, 04:55:17 AM |
|
Hey Claymore, thanks for your development work of the dual miner.
- I want to know if you are adding the connection to Suprnova mining stratum SIAcoin ( stratum + tcp: //sia.suprnova.cc : 2786 ), the pool has a 20 % bonus for each block.
-Can you create a log folder to put all mining log files?
Thanks for your attention
|
|
|
|
|
alfaris
Newbie
Offline
Activity: 15
Merit: 0
|
|
August 09, 2016, 12:00:03 AM |
|
Hi Claymore,
i get with R9 280x 15.5Mh only not 20Mh
How can i improve it ?
|
|
|
|
|
adaseb
Legendary
Offline
Activity: 3752
Merit: 1710
|
|
August 09, 2016, 12:00:27 AM |
|
Hi Claymore,
i get with R9 280x 15.5Mh only not 20Mh
How can i improve it ?
Its normal for 280x. |
|
|
|
scryptr
Legendary
Offline
Activity: 1793
Merit: 1028
|
|
August 09, 2016, 04:08:41 AM |
|
Hi Claymore,
i get with R9 280x 15.5Mh only not 20Mh
How can i improve it ?
Its normal for 280x. DEPENDING HOW HOT YOUR ROOM IS-- 280X cards run hot and eat power. If your cards are overheating, you may need to downclock, and earn 15-16MH/s per card. If you set "-dcri 15" in your config, you will reduce the intensty of your secondary coin by 1/2 and give your 280X cards more room to breathe; they will run faster and at lower temperature. If you set "-cclock 1100", you will overclock your card, increase the hash rate, and increase the temperature of the card. A core clock of 1100 may not be stable for your card/rig, you have to check postings by other miners regarding overclocking. If you set "-tt 87", your card will self regulate, attempting to keep the temperature at or below 87 deg F. If you are in a hot room, your hash may be 15-16MH/s because of temperature throttling. My 280X cards made 22MH/s last winter, when the room was cooler, and the difficulty lower, and the DAG smaller. All of this and more is in the README!!!.txt file, you should study it. --scryptr |
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
August 09, 2016, 04:42:28 AM |
|
Hi Claymore,
i get with R9 280x 15.5Mh only not 20Mh
How can i improve it ?
Its normal for 280x. DEPENDING HOW HOT YOUR ROOM IS-- 280X cards run hot and eat power. If your cards are overheating, you may need to downclock, and earn 15-16MH/s per card. If you set "-dcri 15" in your config, you will reduce the intensty of your secondary coin by 1/2 and give your 280X cards more room to breathe; they will run faster and at lower temperature. If you set "-cclock 1100", you will overclock your card, increase the hash rate, and increase the temperature of the card. A core clock of 1100 may not be stable for your card/rig, you have to check postings by other miners regarding overclocking. If you set "-tt 87", your card will self regulate, attempting to keep the temperature at or below 87 deg F. If you are in a hot room, your hash may be 15-16MH/s because of temperature throttling. My 280X cards made 22MH/s last winter, when the room was cooler, and the difficulty lower, and the DAG smaller. All of this and more is in the README!!!.txt file, you should study it. --scryptr scryptr - will the Stilt BIOS help maximize 280/280x for ETH mining? Thanks |
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
alfaris
Newbie
Offline
Activity: 15
Merit: 0
|
|
August 09, 2016, 05:18:50 AM |
|
Hi Claymore,
i get with R9 280x 15.5Mh only not 20Mh
How can i improve it ?
Its normal for 280x. DEPENDING HOW HOT YOUR ROOM IS-- 280X cards run hot and eat power. If your cards are overheating, you may need to downclock, and earn 15-16MH/s per card. If you set "-dcri 15" in your config, you will reduce the intensty of your secondary coin by 1/2 and give your 280X cards more room to breathe; they will run faster and at lower temperature. If you set "-cclock 1100", you will overclock your card, increase the hash rate, and increase the temperature of the card. A core clock of 1100 may not be stable for your card/rig, you have to check postings by other miners regarding overclocking. If you set "-tt 87", your card will self regulate, attempting to keep the temperature at or below 87 deg F. If you are in a hot room, your hash may be 15-16MH/s because of temperature throttling. My 280X cards made 22MH/s last winter, when the room was cooler, and the difficulty lower, and the DAG smaller. All of this and more is in the README!!!.txt file, you should study it. --scryptr after research i overclocking core clock to 1100 and memory clock to 1600 i get 18.5Mh but run very hot 75c can i get better hash rate if i overclock higher ? and thanks for this info .. |
|
|
|
|
aleixoto
Newbie
Offline
Activity: 16
Merit: 0
|
|
August 09, 2016, 05:44:56 AM
Last edit: August 09, 2016, 05:59:36 AM by aleixoto |
|
Hi Claymore,
i get with R9 280x 15.5Mh only not 20Mh
How can i improve it ?
Its normal for 280x. DEPENDING HOW HOT YOUR ROOM IS-- 280X cards run hot and eat power. If your cards are overheating, you may need to downclock, and earn 15-16MH/s per card. If you set "-dcri 15" in your config, you will reduce the intensty of your secondary coin by 1/2 and give your 280X cards more room to breathe; they will run faster and at lower temperature. If you set "-cclock 1100", you will overclock your card, increase the hash rate, and increase the temperature of the card. A core clock of 1100 may not be stable for your card/rig, you have to check postings by other miners regarding overclocking. If you set "-tt 87", your card will self regulate, attempting to keep the temperature at or below 87 deg F. If you are in a hot room, your hash may be 15-16MH/s because of temperature throttling. My 280X cards made 22MH/s last winter, when the room was cooler, and the difficulty lower, and the DAG smaller. All of this and more is in the README!!!.txt file, you should study it. --scryptr after research i overclocking core clock to 1100 and memory clock to 1600 i get 18.5Mh but run very hot 75c can i get better hash rate if i overclock higher ? and thanks for this info .. me too but not is for temperatue....
i have 1x R9 280x Sapphire win 7 x64 claymore 5.3 driver 15.12 and set overclocking to 1100/1600 powelimit 20, -dcri 60 -ethi 16 i get 17.2 M'hs ETH and 517 m'hs SIA. dual miner when i dont use overclock i get 15 M'hs eth and 240 mhs sia i test to use ethOS distribution linux and get 17mhs max.. why people can mine with 20mhs and i cant?  ? Thanks rep++ |
|
|
|
|
chup
Sr. Member
Offline
Activity: 736
Merit: 262
Me, Myself & I
|
|
August 09, 2016, 06:12:11 AM |
|
me too but not is for temperatue....
i have 1x R9 280x Sapphire win 7 x64 claymore 5.3 driver 15.12 and set overclocking to 1100/1600 powelimit 20, -dcri 60 -ethi 16 i get 17.2 M'hs ETH and 517 m'hs SIA. dual miner when i dont use overclock i get 15 M'hs eth and 240 mhs sia i test to use ethOS distribution linux and get 17mhs max.. why people can mine with 20mhs and i cant? ? Thanks rep++ Decrease -dcri to values between 40 and 50. You can do that during mining using "+" and "-" keys to find your sweet spot of dcri value. EDIT: edited messed quotations |
|
|
|
willi9974
Legendary
Offline
Activity: 3430
Merit: 2663
Escrow Service
|
|
August 09, 2016, 06:17:31 AM |
|
what for keys and functions are during the mining possible?
+ and - are new for me... i know only s for statistics
|
.
.BLACKJACK ♠ FUN. | | | ███▄██████
██████████████▀
████████████
█████████████████
████████████████▄▄
░█████████████▀░▀▀
██████████████████
░██████████████
█████████████████▄
░██████████████▀
████████████
███████████████░██
██████████ | | CRYPTO CASINO &
SPORTS BETTING | | │ | | │ | ▄▄███████▄▄
▄███████████████▄
███████████████████
█████████████████████
███████████████████████
█████████████████████████
█████████████████████████
█████████████████████████
███████████████████████
█████████████████████
███████████████████
▀███████████████▀
███████████████████ | | .
|
|
|
|
|
allcoinminer
|
|
August 09, 2016, 09:29:37 AM |
|
Set core clock speed to 1175 and memory clock speed to 1500.
You should get around 20Mhs. Also try setting -etho to 0.
Lower core clock speed if it crashes.
I did another tweak and I'm getting around 26Mhs. But need to check how stable it is.
|
|
|
|
|
|
allcoinminer
|
|
August 09, 2016, 09:35:55 AM |
|
The proper method for finding the sweet spot is as below.
1) First reset your graphic cards/miner settings to GPUs default clock settings.
2) Restart your computer, run the miner and using any third party apps like, msi afterburner or others,
increase the the memory clock slowly in 50s. Keep moving till the miner crashes.
3) Then set the memory clock to max where the miner runs without crashing.
4) Start slowly increasing the clock speed and find the sweet spot where you get max hashrate without crash.
After this you may play with integrity. Note: Always run the GPU for some time to check for crash.
|
|
|
|
|
clipto
Member
Offline
Activity: 311
Merit: 10
|
|
August 09, 2016, 10:04:03 AM |
|
If you pay for electricity, I would add downvolting.
ETH/ETC algo is perfect for keeping hashrate at lower voltages. (and lower electricity bills)
|
|
|
|
|
elzium
Member
Offline
Activity: 96
Merit: 10
|
|
August 09, 2016, 10:30:17 AM |
|
I agree on that, added power cost is not worth added hashrate on 280x. Go for lowest stable voltage and be cool. I run mine at -125mV and default freqs.
|
|
|
|
|
aleixoto
Newbie
Offline
Activity: 16
Merit: 0
|
|
August 09, 2016, 10:54:05 AM |
|
I agree on that, added power cost is not worth added hashrate on 280x. Go for lowest stable voltage and be cool. I run mine at -125mV and default freqs.
nice thanks! how i cant set -125mV voltaje?? im using -powlim 20 on script but i dont know how set volatjes on mV thanks |
|
|
|
|
aleixoto
Newbie
Offline
Activity: 16
Merit: 0
|
|
August 09, 2016, 11:02:11 AM |
|
Set core clock speed to 1175 and memory clock speed to 1500.
You should get around 20Mhs. Also try setting -etho to 0.
Lower core clock speed if it crashes.
I did another tweak and I'm getting around 26Mhs. But need to check how stable it is.
-etho dont exist... you say -etha 0??? im try with all freq and never get 20mhs... i set all variables and virtual memory to 16gb 1x r9 280x sapphire eth/sia 15.12 driver win7 x64 miner v.5.3 i set 1175/1500 powlim 20 -dcri 70 = 16,9mhs/593mhs -dcri 60 = 17,1mhs/513mhs -dcri 50 = 16,8mhs/420mhs -dcri 40 =16,5mhs/331mhs *if i set low dcri hashrate low on dual miner.. |
|
|
|
|
|
