FaithlessCoinMob
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 27, 2017, 07:36:19 PM |
|
would it be beneficial at all to the ethereum network for me to run nodes on all my rigs, or would it be a waste of power?
|
|
|
|
deadsix
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 27, 2017, 07:44:33 PM |
|
Ethermine is not working for me for the past hour or so.
Claymore can not resolve any of the servers.
Ethpool, which is a sister site, works fine.
Anyone else encountered a similar issue?
|
|
|
|
tperalta82
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 27, 2017, 08:27:37 PM |
|
Ethermine is not working for me for the past hour or so.
Claymore can not resolve any of the servers.
Ethpool, which is a sister site, works fine.
Anyone else encountered a similar issue?
Working fine here, which endpoint are you using? GPU0 t=55C fan=84%, GPU1 t=55C fan=84%, GPU2 t=54C fan=84%, GPU3 t=51C fan=80%, GPU4 t=58C fan=84%, GPU5 t=57C fan=84% ETH: 04/27/17-21:26:54 - New job from eu1.ethermine.org:14444 ETH - Total Speed: 172.047 Mh/s, Total Shares: 6671, Rejected: 2, Time: 44:38 ETH: GPU0 28.702 Mh/s, GPU1 28.645 Mh/s, GPU2 28.700 Mh/s, GPU3 28.687 Mh/s, GPU4 28.656 Mh/s, GPU5 28.656 Mh/s DCR - Total Speed: 4301.177 Mh/s, Total Shares: 8546, Rejected: 66 DCR: GPU0 717.560 Mh/s, GPU1 716.130 Mh/s, GPU2 717.512 Mh/s, GPU3 717.164 Mh/s, GPU4 716.401 Mh/s, GPU5 716.410 Mh/s
|
|
|
|
Ursul0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 27, 2017, 08:59:06 PM |
|
The 75 watts is not supplied by the powered riser. The main power for the GPU comes from the six or eight pin 12 volt power connector specifically designed for high end graphics cards. The power to the riser replaces the supplementary power that would be provided by the PCI-E slot which is not much power at all.
really? it was a scandal that polaris takes more from pcie that the spec allows http://www.tomshardware.com/reviews/amd-radeon-rx-480-polaris-10,4616-9.htmlEDIT: "We skipped long-term overclocking and overvolting tests, since the Radeon RX 480’s power consumption through the PCIe slot jumped to an average of 100W, peaking at 200W. We just didn’t want to do that to our test platform."
|
|
|
|
Biodom
Legendary
Offline
Activity: 3850
Merit: 4231
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 27, 2017, 09:29:54 PM |
|
A bit off-topic but avoid MSI like the plague and make sure your RX cards have Samsung RAM only, exchage any Hynix RAM cards before its too late! I'm going on 3 weeks now waiting on MSI for RMA. 100% defect rate on 7 of their cards, even the one armor card had fan barrings go after a week.
I have had more than a dozen MSI gaming X 470+480. Not a single one failed, all except two were Hynix. On the other hand, out of a similar number of Sapphire Nitros, one failed (ball bearings, screeching sound and on another one fan was making noises, but card was working, so i just had it replaced). Well I got a load of garbage cards from MSI, buyer beware. 32 bit mode got fried on two of the MSI cards while plugged directly into the pcie slot, so I know it's not the risers and other brands (gigabyte, sapphire & powercolor) all working fine. bizarre, I just had two MSI 570 gaming X activated directly in pcie slots-no prob so far, although it took me a while to bring the Z170-AR mobo up to speed so it boots properly. Asus Z170AR surely has some bizarre default settings. I especially dislike the fact that it refuses to boot using ram that they did not describe in the table (and for crucial 4gb there is only ONE type that is anointed). Nevertheless, upon some tinkering my other RAM booted anyway.
|
|
|
|
GabryRox
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 27, 2017, 10:25:15 PM Last edit: April 28, 2017, 10:18:58 PM by mprep |
|
Hi guys ! Correct me if Im wrong. If i see 1100 watt from the wall on my wattmeter , so on 80+ Standard PSU its 1100*0.8=880 power load of PSU. And its good enough for PSUs working conditions (1000Watt Chieftech)? I mean its about 85% of its full load.
Right ?
If you have a 1000W PSU how can you see 1100 at the wall? Something is wrong... The 80+ standard is a measure of efficiency. No PSU will deliver 100% of its nominal output, 10~20% is lost in heat. Therefore, a 1000W PSU will only deliver ~800W within a limited range of loads, and not at full load. Got it? A 1000W PSU will never "suck" 1100w from the wall.... That is not correct. See here: http://www.tomshardware.com/reviews/corsair-ax1500i-titanium-power-supply,4276-4.html"Load Regulation And Efficiency Measurements The first set of tests reveals the stability of the voltage rails and the PSU's efficiency. The applied load equals (approximately) 10 to 110 percent of the maximum load the supply can handle, in increments of 10 percentage points...... 1500W PSU Output - 1549.07W, efficiecny -89.04%, PSU input 1739.84W ......" Interesting article. Looks like 50% As well as 100% load are not efficient mode of operation. from 80 to 90 % is the best PSU load. Cool... cuz my 3 1200W Plat PSU's are all at around 1000w... so right in that sweet-spot range ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
A bit off-topic but avoid MSI like the plague and make sure your RX cards have Samsung RAM only, exchage any Hynix RAM cards before its too late! I'm going on 3 weeks now waiting on MSI for RMA. 100% defect rate on 7 of their cards, even the one armor card had fan barrings go after a week.
I have had more than a dozen MSI gaming X 470+480. Not a single one failed, all except two were Hynix. On the other hand, out of a similar number of Sapphire Nitros, one failed (ball bearings, screeching sound and on another one fan was making noises, but card was working, so i just had it replaced). Yeah, I'm not sure what this supposed issue with Hynix RAM is on MSI 400 series. I really wonder if it's people trying to aritficially reduce the demand for the remaining few new ones still in the market so they can hoard them themselves. I personally have been running 21 MSI 470's for between 2-7 months... 17 of the 21 have Hynix and the other 4 have Samsung. To date, have not had 1 issue with any of these cards, including all 17 Hynix ones. In fact, 4 of these have probably been in use for more than a year as I bought them used from Philima1957. So again, not real sure what's driving a few people to bash Hynix but i have not experienced or heard reliable accounts of any real issues.
|
|
|
|
stefen83
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 27, 2017, 11:12:27 PM |
|
i have 007 risers, and i suggest buying at least one more than needed because of the bad quality of that product. After I replaced a bad one (one pin wasn't connected) it works well on clay 9.2. you won't need any adapter cause of the SATA-Connector. I don't know what power is drawn through these and whats the maximum possible, but for me its ok. I'm looking forward to get the new version...but for me 9.2 is nearly perfect (only a little Mh hopping).
|
|
|
|
TheLAWNoob
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 92
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 27, 2017, 11:18:09 PM |
|
Driver modding didnt work. Still 5 cards max on new drivers.
|
Working on something good. Pls support.
|
|
|
yoonline
Newbie
Offline
Activity: 51
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 28, 2017, 12:57:31 AM |
|
Driver modding didnt work. Still 5 cards max on new drivers.
can you run 500 series with bios mod in new drivers?
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 28, 2017, 03:11:59 AM Last edit: April 28, 2017, 03:32:44 AM by scryptr |
|
Driver modding didnt work. Still 5 cards max on new drivers.
can you run 500 series with bios mod in new drivers? ACCORDING TO THE POLARIS BIOS EDITING PAGE, YES-- The very latest drivers allow for modded BIOS, "17.4.3+ Drivers Allow modded Bios". Here is the link to the page: http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx --scryptr
|
|
|
|
Swiped
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 100
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 28, 2017, 05:06:41 AM |
|
As the Sapphire Nitro+ 470 8g card supply dries up across the world, I bought 6 Sapphire Nitro 470 8g cards which are different in that they have no leds, and the memory clock tops out at 1750 MHz. They run at 24 MH/s stock, but I know I have seen where people get these up to 27-28 MH/s. Any experienced help would be appreciated to help me get these cards hashing at a higher rate. I have tried to mod the bios by copying over the last two straps, but everything I do makes the cards unstable and I have to be careful because these cards do not have the safe bios mode, so they can be bricked pretty quick. Any suggestions on how to get the speed up without making a bios mod?
|
|
|
|
shotkina
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 28, 2017, 05:13:25 AM |
|
Guys, if i use stock bios, do i need to buy cards with samsung memory ? or it's just for overclocking ?
|
|
|
|
Jamievs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 28, 2017, 06:04:51 AM |
|
Guys, if i use stock bios, do i need to buy cards with samsung memory ? or it's just for overclocking ?
Samsung is most convenient for overclocking. If you are gonna use stock it shouldn't matter that much.
|
|
|
|
notbatman
Legendary
Offline
Activity: 2212
Merit: 1038
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 28, 2017, 07:37:25 AM |
|
A bit off-topic but avoid MSI like the plague and make sure your RX cards have Samsung RAM only, exchage any Hynix RAM cards before its too late! I'm going on 3 weeks now waiting on MSI for RMA. 100% defect rate on 7 of their cards, even the one armor card had fan barrings go after a week.
I have had more than a dozen MSI gaming X 470+480. Not a single one failed, all except two were Hynix. On the other hand, out of a similar number of Sapphire Nitros, one failed (ball bearings, screeching sound and on another one fan was making noises, but card was working, so i just had it replaced). Yeah, I'm not sure what this supposed issue with Hynix RAM is on MSI 400 series. I really wonder if it's people trying to aritficially reduce the demand for the remaining few new ones still in the market so they can hoard them themselves. I personally have been running 21 MSI 470's for between 2-7 months... 17 of the 21 have Hynix and the other 4 have Samsung. To date, have not had 1 issue with any of these cards, including all 17 Hynix ones. In fact, 4 of these have probably been in use for more than a year as I bought them used from Philima1957. So again, not real sure what's driving a few people to bash Hynix but i have not experienced or heard reliable accounts of any real issues. AMD doesn't have a reference rx470 it's a bullshit hack made by the card manufacturers and the MSI cards I got are all garbage and I have to RMA all of them, the ones with Hynix ram are non-functional and the Samsung cards no longer work in 32 bit mode. The fan is screwed on the remaining armor card. FUCK MSI AND FUCK HYNIX AND FUCK YOU TOO ASSWIPE, ARTIFICIALLY REDUCING NOTHING.
|
|
|
|
randayh
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 28, 2017, 10:04:00 AM |
|
Claymore quad mining :-) Yes, you can mine four coins at once. (ETC/MC/BEC/DRC) epool.io
|
|
|
|
restless
Legendary
Offline
Activity: 1151
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 28, 2017, 10:08:44 AM |
|
Any idea how fast Inet connection is needed for normal speed mining?
Or can someone suggest a tool for measuring it?
|
|
|
|
TechPark
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 28, 2017, 10:10:36 AM Last edit: April 28, 2017, 10:17:54 PM by mprep |
|
This is the activity of my miners: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fvgy.me%2Fl2W3GQ.png&t=665&c=nNqiN3yy4C19gQ) The Yellow one is the only one on 9.1 and Eth Only What are the other colors for? 6x GPU RX 470/480 rigs mining dual how can i use the same graphic representation for mine rigs?
Looks like I got happy to early Woke up to this http://imgur.com/a/VsCdANothing special in the log file. :/ Any ideas anyone? Many ideas: - overclocked too much. 2220?! - downvolted too much. 975?! - change your dcri until you het the maximum GPU MEM load
Zou cant use 17.4.3 driver. Use 16.* .With 17.4.3 miner does not recogniye zour cards is not correct... Read my post... I wrote: with Original silent bios all works fine and i get 22.6Mhs...with 17.4.3 driver... after flashing with modded bios i get the essrror in the screen shot.. Read the answer again: 17.4.3 driver does not recognize modded cards
Dear Claymore, I'm using followin bat file at 9.2 to mine ETH (ethermine) and DCR (coinmine.pl) start/high EthDcrMiner64.exe -epool eu2.ethermine.org:4444 -ewal mywalletID.WorkerName -epsw x -dpool stratum+tcp://dcr-eu.coinmine.pl:2222 -dwal MyUserName.WorkerName -dpsw xxy342 -dcri 30 -mode 0 -wd 1 -tt 80 -ttdcr 76 -ttli 78 -tstop 85 I'm experiencing speed fluctations on my Windows 10 pro x64. Any ideas? Do I also need to include asm parameter in my bat file? Besides, anyone can recommend a bat file for expanse and dcr mining with 9.2 release? I am not Claymore but I know the answers. I'm experiencing speed fluctations on my Windows 10 pro x64. Any ideas? >>> Yes, it has been discussed on all 15 pages before your post. Read. >>>Do I also need to include asm parameter in my bat file? ASm-1 is default. You can add ASM to your bat/config if you want to play with other values 0,2,3. >>> Your temperature settings are wrong. -tt has to be the lowest out of all 4 - this is the target
@Claymore the latest 9.2 version consume the Eth for the DCR even with lowering the -dcri in ver 8.1 was getting 31.1MH Eth + 575 MH DCR per card and stable with temp 55~58 now 30.8 MH eth + 450 DCR unstable with 61 ~ 65 TEMP Please undo the changes i cannot run the old 8.1 ver cz DCR stopped there what are your settings?
What are the parameters to control the intensity of the decred ? Currently it is possible to do here 28,800mh / s eth and 850mh / s decred Rx 480 Is it possible to mine eth in one poll and decred in another?
What are the parameters to control the intensity of the decred ? 1-100 Currently it is possible to do here 28,800mh / s eth and 850mh / s decred - yes Is it possible to mine eth in one poll and decred in another? - yes
Anyone have RX 570 or 580?
AMD's newest driver only support 5 cards, BSOD on the 6th. I tried 6 470s same problem.
Have anyone had any luck getting 6 RX 570 or 580 working on Windows 10? I'm not sure if the older drivers will let me install.
what driver? what are your components?
Anyone have RX 570 or 580?
AMD's newest driver only support 5 cards, BSOD on the 6th. I tried 6 470s same problem.
Have anyone had any luck getting 6 RX 570 or 580 working on Windows 10? I'm not sure if the older drivers will let me install.
i wonder the same. I tried 6x 570 no luck.... Also has anyone tried to mix 470 with 570 on same rig? or 480 with 580? ANy luck? I got 5 of them working with 17.4.3 drivers but.... 1 off them still has code 43. So i didnt even tried putting a 6th one... ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimage.prntscr.com%2Fimage%2F4eb3432556854ef3b0f60ae1efb9c807.png&t=665&c=f1QZDFUHqC7elw) what driver? what are your components? what have you tried?
How to show those sol-mhs per 1 KW in software? How to do that? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2Ffr2jwsn.png&t=665&c=fgUeHuv8zr30MQ) ask there, where you got the screenshot from!
Hi.
I have sometimes the issue, one GPU (1 of 7), usually GPU3 or GPU4 is starting with a much lower hashrate, for example one GPU about 7MH, the other above 30. Also the DAG generation on this GPU takes longer. Have You some idea how to solve? Sometimes, after many reboot's is't ok and all GPU have high hashrate.
wait for 3 days and download a new version
hi guys, have bigg problem, I tried everything to solve problem and noting, have 6x rx480 8gb asus dual(mod bios), use claymore 9.2, driver 16.10.2, have bigg fluctuation, try to change drivers, try to change overcloak, try to change -ethi and -dcri, and same problem GPU activite all time 100% - 0%, and mh/s 30mh/s to 5mh/s ...... plz some help or any idea for this problem .. ?? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi1356.photobucket.com%2Falbums%2Fq727%2Fkostickole92%2F2_zpspclyau9d.png&t=665&c=zaWkuuKX4ct3cA) - do not undervolt - use asm -0 - use ddu to uninstall the driver - install 16.11.5
hi guys, have bigg problem, I tried everything to solve problem and noting, have 6x rx480 8gb asus dual(mod bios), use claymore 9.2, driver 16.10.2, have bigg fluctuation, try to change drivers, try to change overcloak, try to change -ethi and -dcri, and same problem GPU activite all time 100% - 0%, and mh/s 30mh/s to 5mh/s ...... plz some help or any idea for this problem .. ?? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi1356.photobucket.com%2Falbums%2Fq727%2Fkostickole92%2F2_zpspclyau9d.png&t=665&c=zaWkuuKX4ct3cA) Do you have a second screen connected? I could solve this jumps by unplugging my second screen which was plugged into my mainboard Yep i have second screen, I would be very grateful if you can solve problem Teamviewer: ID:880275766 pass:y2us61 teamviewer is not running
hi guys, have bigg problem, I tried everything to solve problem and noting, have 6x rx480 8gb asus dual(mod bios), use claymore 9.2, driver 16.10.2, have bigg fluctuation, try to change drivers, try to change overcloak, try to change -ethi and -dcri, and same problem GPU activite all time 100% - 0%, and mh/s 30mh/s to 5mh/s ...... plz some help or any idea for this problem .. ?? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi1356.photobucket.com%2Falbums%2Fq727%2Fkostickole92%2F2_zpspclyau9d.png&t=665&c=zaWkuuKX4ct3cA) Do you have a second screen connected? I could solve this jumps by unplugging my second screen which was plugged into my mainboard Yep i have second screen, I would be very grateful if you can solve problem Teamviewer: ID:880275766 pass:y2us61 dude, send that info by PM to him. Seriously. We're all friends here ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) We are family now ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
hi guys, have bigg problem, I tried everything to solve problem and noting, have 6x rx480 8gb asus dual(mod bios), use claymore 9.2, driver 16.10.2, have bigg fluctuation, try to change drivers, try to change overcloak, try to change -ethi and -dcri, and same problem GPU activite all time 100% - 0%, and mh/s 30mh/s to 5mh/s ...... plz some help or any idea for this problem .. ?? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi1356.photobucket.com%2Falbums%2Fq727%2Fkostickole92%2F2_zpspclyau9d.png&t=665&c=zaWkuuKX4ct3cA) Do you have a second screen connected? I could solve this jumps by unplugging my second screen which was plugged into my mainboard Yep i have second screen, I would be very grateful if you can solve problem dude, I dont think you should post that information in a forum. Anyone could enter your rig and change the wallet to his own. In the best case. Regarding your problem: If the problem really is the second screen, I'm not able to unplug your second monitor via teamviewer He translated your "I could solve" via translator as you are offering your help. That is why he gave you TM.
|
|
|
|
jackbox
Legendary
Offline
Activity: 1246
Merit: 1024
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 28, 2017, 10:48:53 AM |
|
Any idea how fast Inet connection is needed for normal speed mining?
Or can someone suggest a tool for measuring it?
You don't need a very fast internet connection. Not much data is being transferred. The most important thing is latency so pick the closest server available to where your mining rigs are.
|
|
|
|
TechPark
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 28, 2017, 10:49:15 AM |
|
Well , I'm not sure if having a screen plugged in on you onboard VGA have anything to do with bad hashing, I'm running Win 10 pro with monitor on my onboard VGA and mining on 2 X RX480 8Gb, it does not make a difference when I unplug it..
Does anyone ells think it's better to have no screen attached?
Do you get fan and temperature readings on the miner and GPUZ?
|
|
|
|
Trimegistus
Legendary
Offline
Activity: 1564
Merit: 1027
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 28, 2017, 10:57:51 AM |
|
hi guys, have bigg problem, I tried everything to solve problem and noting, have 6x rx480 8gb asus dual(mod bios), use claymore 9.2, driver 16.10.2, have bigg fluctuation, try to change drivers, try to change overcloak, try to change -ethi and -dcri, and same problem GPU activite all time 100% - 0%, and mh/s 30mh/s to 5mh/s ...... plz some help or any idea for this problem .. ?? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi1356.photobucket.com%2Falbums%2Fq727%2Fkostickole92%2F2_zpspclyau9d.png&t=665&c=zaWkuuKX4ct3cA) - do not undervolt - use asm -0 - use ddu to uninstall the driver - install 16.11.5 I know you mean well but are offering poor advice. I undervolt, I underclock, I use -asm 1 and I don't have this kind of issues.
|
|
|
|
|