Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[muzuca]

hey guys, how I disable the dual mining just for one gpu? I'm using -dcri 44,44,0,44

but isn't work.

[Marvell2]

I wont lie , I did have a few rigs unsable with 11.1 - 11.3

What i found is if i turned off dual mining they were fine, so I just left them be

@claymore If our rigs are relatively stable , should we just stay with 11.4 ?

for Nvidia rigs is it really worth it to go 11.5 ? some are saying its unstable , why would that be

[Vann]

hey guys, how I disable the dual mining just for one gpu? I'm using -dcri 44,44,0,44

but isn't work.

-mode   Select mining mode:
   "-mode 0" (default) means dual Ethereum + Decred/Siacoin/Lbry mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).
   For systems with more than 10 GPUs: use letters to specify indexes more than 9, for example, "a" means index 10, "b" means index 11, etc.

You can also hit the keyboard key for the GPU index number shown in the Claymore miner of the GPU you want to turn off dual mining for and it will cycle the GPU single/dual mining on or off.

[john1010]

Been running 10.6....has been rock solid. bit the bullet and moved to 11.5 and hash improvements 3.5 mhs per rig...(better than nothing)..

rig 1 x6 580s
rig 2 x6 580s

i forgot to add -oldkernal 1 initially and got a stack of memory errors...and the errors dramatically reduced when -oldkernal 1 was added and hash rate stayed the same.

just notices some instability with the hash rates..jumps to and from 173-181 a fair bit....

my current config:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-asia1.nanopool.org:9999 -ewal xxx.rig1/xxx -epsw x -mode 1 -ftime 10 -oldkernels 1

any help would be fantastic.

thanks.
 

cheers

Is 11.6 is out where did you get that version? I can only see that the available right now in the main page is 11.5 how come that you already used the 11.6 version? If it is out do you have alink?

------------------------------------------

Oh I see you already corrected the 11.6, anyway i wont change mine.

[muzuca]

hey guys, how I disable the dual mining just for one gpu? I'm using -dcri 44,44,0,44

but isn't work.

-mode   Select mining mode:
   "-mode 0" (default) means dual Ethereum + Decred/Siacoin/Lbry mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).
   For systems with more than 10 GPUs: use letters to specify indexes more than 9, for example, "a" means index 10, "b" means index 11, etc.

You can also hit the keyboard key for the GPU index number shown in the Claymore miner of the GPU you want to turn off dual mining for and it will cycle the GPU single/dual mining on or off.

Great! Tks.

[big al]

Been running 10.6....has been rock solid. bit the bullet and moved to 11.5 and hash improvements 3.5 mhs per rig...(better than nothing)..

rig 1 x6 580s
rig 2 x6 580s

i forgot to add -oldkernal 1 initially and got a stack of memory errors...and the errors dramatically reduced when -oldkernal 1 was added and hash rate stayed the same.

just notices some instability with the hash rates..jumps to and from 173-181 a fair bit....

my current config:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-asia1.nanopool.org:9999 -ewal xxx.rig1/xxx -epsw x -mode 1 -ftime 10 -oldkernels 1

any help would be fantastic.

thanks.
 

cheers

I too have noticed some fluctuation.  3 to 5% per card.  I have bios modded rx580s.  Very stable though.  I am dual mining keccac.  0 rejected and incorrect. Some stale on keccac none on ETH. 

Hit Z to have it auto tune in mode 1.

[kgminer]

Can someone please help or advise

Claymore doesn't show does not GPU temperature and fan status so I can't use fan and temrature related controls. Commands like -tt, -ttdcr, -ttli, -tstop, -tstart, -fanmax, -fanmin

RX 580 pulse 8 GB GPUs
Driver version 23.20.782.0
Driver date 20/10/2017
Radeon-Software-Crimson-Relive-Edition-17.10.2
MotherBoard B250 MINING EXPERT
Windows 10 ent edition x64

I am able to control fan and temprature via MSI afterburner

[alex_85]

What happened guys, i was mining very good with v.11.4 with the fixed stale shares and everything was great  1-2 % stale shares. But now (12 hours already) i got 8-12 % stale shares and nothing was changed. Is there any problem with ethermine ?
Anyone else noticed doubled stale shares last 12 hours ?

[CryptoDocker]

What happened guys, i was mining very good with v.11.4 with the fixed stale shares and everything was great  1-2 % stale shares. But now (12 hours already) i got 8-12 % stale shares and nothing was changed. Is there any problem with ethermine ?
Anyone else noticed doubled stale shares last 12 hours ?

My stales have been very good on 11.4 no issues at all compared to last few builds (on AMD) . There is an issue with NVIDIA I think thought U need to upgrade to 11.5

[alex_85]

i am not with Nvidia cards . I am using Sapphire RX580 nitro + 8GB

[Piskeante]

with versions before 11.4 i was getting like 5-8% stale shares. With 11.5 i'm nearly 0. this is awesome. Now the question is: how many people have been saying that having mem errors on your GPU actually increased stale shares?? Some cards i have get stale shares (and was related to mem errors) and now , with more or less the same number of errors, getting 0-1% stale. Someone has to rectify.

btw, stale shares with Nvidia cards on my rig were almost 25%. it was incredibly bad, so i turned it off in search for hardware problems. Now it seems that the problem was not my hardware but the miner. OMG how many hours of headaches.

At least......all seems to run fine now.  

[ildotoress]

What happened guys, i was mining very good with v.11.4 with the fixed stale shares and everything was great  1-2 % stale shares. But now (12 hours already) i got 8-12 % stale shares and nothing was changed. Is there any problem with ethermine ?
Anyone else noticed doubled stale shares last 12 hours ?

Same here, restarted everything and still registering double stales.
Conclusion would be that Ethermine is having some issues or very high fluctuation in hash-rate.

But one thing is certain, the time of uploading a share has increased from 40ms to 60ms now (without any hardware, software or bandwidth changes).

[mini miner]

What happened guys, i was mining very good with v.11.4 with the fixed stale shares and everything was great  1-2 % stale shares. But now (12 hours already) i got 8-12 % stale shares and nothing was changed. Is there any problem with ethermine ?
Anyone else noticed doubled stale shares last 12 hours ?

Same here, restarted everything and still registering double stales.
Conclusion would be that Ethermine is having some issues or very high fluctuation in hash-rate.

But one thing is certain, the time of uploading a share has increased from 40ms to 60ms now (without any hardware, software or bandwidth changes).

some of ethermine miners only facing high stale shares problem.now i have changed my pool its fine now (from ethermine to nanopool), iam getting 0-1% stales now

[big al]

Cheers. Question (off topic) whats the performance like with dual mining ETH + Keccak using your 580s? Been thinking about ETH + BLAKE2S... but not sure which combo would suit best with these cards.

Hot and cranky!  Msi rx580 bios flashed 8gb micron

Card 1: 32.2 ETH/193 KEC/dcri 6/137 watts/1200 core/2209 memory
Card 2: 30.8 ETH/215 KEC/dcri 7/132 watts/1215 core/2216 memory

If you are dual mining with keccak start with dcri at 6 and try some of the slower cards at 7.  Your fast cards will be unstable at 7 and all will be at 8. I use the nicehash keccak server at keccak.usa.nicehash.com:3338. Just give it your bitcoin address and go to town.  If you want smartcoin they have their own pools but you need to set up with them.

[djmuler]

What happened guys, i was mining very good with v.11.4 with the fixed stale shares and everything was great  1-2 % stale shares. But now (12 hours already) i got 8-12 % stale shares and nothing was changed. Is there any problem with ethermine ?
Anyone else noticed doubled stale shares last 12 hours ?

Same here, restarted everything and still registering double stales.
Conclusion would be that Ethermine is having some issues or very high fluctuation in hash-rate.

But one thing is certain, the time of uploading a share has increased from 40ms to 60ms now (without any hardware, software or bandwidth changes).

some of ethermine miners only facing high stale shares problem.now i have changed my pool its fine now (from ethermine to nanopool), iam getting 0-1% stales now

I noticed the same problem, huge increase of stale shares about 12 hours ago in ehttermine with v 11.4, i will try 11.5 before change pool.

How can you see stales in nanopool?

[ascaloon]

What happened guys, i was mining very good with v.11.4 with the fixed stale shares and everything was great  1-2 % stale shares. But now (12 hours already) i got 8-12 % stale shares and nothing was changed. Is there any problem with ethermine ?
Anyone else noticed doubled stale shares last 12 hours ?

Same here

[angelesmix]

I will help with setting up your rig
through TeamViewer
for a small fee
Any difficulties

[leomcr]

I'm still on the 10.6 version, which gives me over 196mhs on my 13 rx560 cards (using linux/hiveos).
From the 11.x version, I lost about 0.800 per card, which means that I lost a big 10mhs for my rig.
Using the 11.4 version, things got a little bit better, but still under 10.6 version. With this version I got 194mhs.
Not tested yet the 11.5 version, but probably the -oldkernels switch will bring me back the best performance I had with claymore.

that is right. But the stale share is less. So you might end more valid shares.

I have similar hashrate for v10.6 and v11.5, but you can try "-oldkernels 1" if you see bad speed. Also you can try "-asm 2" and "z" key to find best -dcri for ETH-only mode.

thanks. I will test and post my feedback.

[RuMiner]

Updated 11.5 with -oldkernels 1 to my rigs. Lower reported hashrate, more dizzy, but effective hashrate and found shares grew up, also not a single GPU fail after almost 16 hours of uptime. Old kernels are my favorite )
https://yadi.sk/i/VqsiqXBk3TPi24

[Tr1n1tY]

My 12 GPU rig (7 x RX580's, 4 x RX480's and 1 RX570) is running stable since v11.2.
Rig was doing 359 Mh/s before v11.2, stale shares 5-10%.
 
on v11.4, same oc, 366 Mh/s, proved stable, but the effective average hashrate on ethermine was 5-8% below reported, stale shares 5-10%.

Upgraded to v11.4 and started testing different oc's. Increased cclock to 1200 from 1175, and decreased mclock to 2180 from 2200. Same ratio of oc for RX570 as well (cclock to 1100, mclock to 1930)
Rig is running 362.6 Mh/s stable, average effective hashrate is 3% below reported, taking in mind that fees are 2%, and 0-3% stale shares.

Rig is running on SMOS.
Only mining ETH.
Auto detection of DCRI
All cards are bios-modded
140w on avg for each card from the wall (undervolting doesn't play well with Linux)

Miner Console
ETH: GPU0 30.206 Mh/s, GPU1 30.524 Mh/s, GPU2 30.506 Mh/s, GPU3 30.524 Mh/s, GPU4 30.525 Mh/s, GPU5 30.447 Mh/s, GPU6 30.228 Mh/s, GPU7 30.496 Mh/s, GPU8 30.526 Mh/s,
GPU9 30.219 Mh/s, GPU10 30.227 Mh/s, GPU11 28.236 Mh/s
ETH: 03/15/18-10:42:44 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 362.665 Mh/s, Total Shares: 418, Rejected: 0, Time: 01:21

Hope it helps