alex_85
Newbie
 Offline
Activity: 55
Merit: 0
|
 |
March 15, 2018, 07:22:56 AM |
|
What happened guys, i was mining very good with v.11.4 with the fixed stale shares and everything was great 1-2 % stale shares. But now (12 hours already) i got 8-12 % stale shares and nothing was changed. Is there any problem with ethermine ?
Anyone else noticed doubled stale shares last 12 hours ?
|
|
|
|
|
CryptoDocker
Jr. Member
Offline
Activity: 122
Merit: 1
|
|
March 15, 2018, 07:34:27 AM |
|
What happened guys, i was mining very good with v.11.4 with the fixed stale shares and everything was great 1-2 % stale shares. But now (12 hours already) i got 8-12 % stale shares and nothing was changed. Is there any problem with ethermine ?
Anyone else noticed doubled stale shares last 12 hours ?
My stales have been very good on 11.4 no issues at all compared to last few builds (on AMD) . There is an issue with NVIDIA I think thought U need to upgrade to 11.5 |
|
|
|
|
alex_85
Newbie
Offline
Activity: 55
Merit: 0
|
|
March 15, 2018, 08:02:06 AM |
|
i am not with Nvidia cards . I am using Sapphire RX580 nitro + 8GB
|
|
|
|
|
Piskeante
Member
Offline
Activity: 924
Merit: 15
|
|
March 15, 2018, 08:02:28 AM |
|
with versions before 11.4 i was getting like 5-8% stale shares. With 11.5 i'm nearly 0. this is awesome. Now the question is: how many people have been saying that having mem errors on your GPU actually increased stale shares?? Some cards i have get stale shares (and was related to mem errors) and now , with more or less the same number of errors, getting 0-1% stale. Someone has to rectify.
btw, stale shares with Nvidia cards on my rig were almost 25%. it was incredibly bad, so i turned it off in search for hardware problems. Now it seems that the problem was not my hardware but the miner. OMG how many hours of headaches.
At least......all seems to run fine now.
|
BTC no more than 6k by end of 2019. ETH no more than 300$ by end 2019. Huge market manipulation, huge amount of scammers and hypers.
|
|
|
ildotoress
Newbie
Offline
Activity: 77
Merit: 0
|
|
March 15, 2018, 08:05:05 AM |
|
What happened guys, i was mining very good with v.11.4 with the fixed stale shares and everything was great 1-2 % stale shares. But now (12 hours already) i got 8-12 % stale shares and nothing was changed. Is there any problem with ethermine ?
Anyone else noticed doubled stale shares last 12 hours ?
Same here, restarted everything and still registering double stales. Conclusion would be that Ethermine is having some issues or very high fluctuation in hash-rate. But one thing is certain, the time of uploading a share has increased from 40ms to 60ms now (without any hardware, software or bandwidth changes). |
|
|
|
|
mini miner
Newbie
Offline
Activity: 60
Merit: 0
|
|
March 15, 2018, 08:13:34 AM |
|
What happened guys, i was mining very good with v.11.4 with the fixed stale shares and everything was great 1-2 % stale shares. But now (12 hours already) i got 8-12 % stale shares and nothing was changed. Is there any problem with ethermine ?
Anyone else noticed doubled stale shares last 12 hours ?
Same here, restarted everything and still registering double stales. Conclusion would be that Ethermine is having some issues or very high fluctuation in hash-rate. But one thing is certain, the time of uploading a share has increased from 40ms to 60ms now (without any hardware, software or bandwidth changes). some of ethermine miners only facing high stale shares problem.now i have changed my pool its fine now (from ethermine to nanopool), iam getting 0-1% stales now |
|
|
|
|
big al
Member
Offline
Activity: 140
Merit: 10
|
|
March 15, 2018, 08:25:17 AM |
|
Cheers. Question (off topic) whats the performance like with dual mining ETH + Keccak using your 580s? Been thinking about ETH + BLAKE2S... but not sure which combo would suit best with these cards.
Hot and cranky! Msi rx580 bios flashed 8gb micron Card 1: 32.2 ETH/193 KEC/dcri 6/137 watts/1200 core/2209 memory Card 2: 30.8 ETH/215 KEC/dcri 7/132 watts/1215 core/2216 memory If you are dual mining with keccak start with dcri at 6 and try some of the slower cards at 7. Your fast cards will be unstable at 7 and all will be at 8. I use the nicehash keccak server at keccak.usa.nicehash.com:3338. Just give it your bitcoin address and go to town. If you want smartcoin they have their own pools but you need to set up with them. |
|
|
|
|
djmuler
Jr. Member
Offline
Activity: 41
Merit: 2
|
|
March 15, 2018, 08:47:24 AM |
|
What happened guys, i was mining very good with v.11.4 with the fixed stale shares and everything was great 1-2 % stale shares. But now (12 hours already) i got 8-12 % stale shares and nothing was changed. Is there any problem with ethermine ?
Anyone else noticed doubled stale shares last 12 hours ?
Same here, restarted everything and still registering double stales. Conclusion would be that Ethermine is having some issues or very high fluctuation in hash-rate. But one thing is certain, the time of uploading a share has increased from 40ms to 60ms now (without any hardware, software or bandwidth changes). some of ethermine miners only facing high stale shares problem.now i have changed my pool its fine now (from ethermine to nanopool), iam getting 0-1% stales now I noticed the same problem, huge increase of stale shares about 12 hours ago in ehttermine with v 11.4, i will try 11.5 before change pool. How can you see stales in nanopool? |
DeepOnion ⚡ Anonymous & Untraceable Cryptocurrency
⚡ Join DeepOnion Airdrop NOW! ⚡ (https://deeponion.org/apply.php?ref=1704984) |
|
|
ascaloon
Newbie
Offline
Activity: 36
Merit: 0
|
|
March 15, 2018, 09:08:10 AM |
|
What happened guys, i was mining very good with v.11.4 with the fixed stale shares and everything was great 1-2 % stale shares. But now (12 hours already) i got 8-12 % stale shares and nothing was changed. Is there any problem with ethermine ?
Anyone else noticed doubled stale shares last 12 hours ?
Same here |
|
|
|
|
angelesmix
Newbie
Offline
Activity: 10
Merit: 0
|
|
March 15, 2018, 09:17:51 AM |
|
I will help with setting up your rig
through TeamViewer
for a small fee
Any difficulties
|
|
|
|
|
leomcr
Newbie
Offline
Activity: 5
Merit: 0
|
|
March 15, 2018, 09:28:42 AM |
|
I'm still on the 10.6 version, which gives me over 196mhs on my 13 rx560 cards (using linux/hiveos).
From the 11.x version, I lost about 0.800 per card, which means that I lost a big 10mhs for my rig.
Using the 11.4 version, things got a little bit better, but still under 10.6 version. With this version I got 194mhs.
Not tested yet the 11.5 version, but probably the -oldkernels switch will bring me back the best performance I had with claymore.
that is right. But the stale share is less. So you might end more valid shares. I have similar hashrate for v10.6 and v11.5, but you can try "-oldkernels 1" if you see bad speed. Also you can try "-asm 2" and "z" key to find best -dcri for ETH-only mode. thanks. I will test and post my feedback. |
|
|
|
|
RuMiner
Member
Offline
Activity: 168
Merit: 15
|
|
March 15, 2018, 09:51:45 AM |
|
Updated 11.5 with -oldkernels 1 to my rigs. Lower reported hashrate, more dizzy, but effective hashrate and found shares grew up, also not a single GPU fail after almost 16 hours of uptime. Old kernels are my favorite ) https://yadi.sk/i/VqsiqXBk3TPi24 |
|
|
|
|
Tr1n1tY
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 15, 2018, 09:56:23 AM
Last edit: March 15, 2018, 10:08:31 AM by Tr1n1tY |
|
My 12 GPU rig (7 x RX580's, 4 x RX480's and 1 RX570) is running stable since v11.2.
Rig was doing 359 Mh/s before v11.2, stale shares 5-10%.
on v11.4, same oc, 366 Mh/s, proved stable, but the effective average hashrate on ethermine was 5-8% below reported, stale shares 5-10%.
Upgraded to v11.4 and started testing different oc's. Increased cclock to 1200 from 1175, and decreased mclock to 2180 from 2200. Same ratio of oc for RX570 as well (cclock to 1100, mclock to 1930)
Rig is running 362.6 Mh/s stable, average effective hashrate is 3% below reported, taking in mind that fees are 2%, and 0-3% stale shares.
Rig is running on SMOS.
Only mining ETH.
Auto detection of DCRI
All cards are bios-modded
140w on avg for each card from the wall (undervolting doesn't play well with Linux)
Miner Console
ETH: GPU0 30.206 Mh/s, GPU1 30.524 Mh/s, GPU2 30.506 Mh/s, GPU3 30.524 Mh/s, GPU4 30.525 Mh/s, GPU5 30.447 Mh/s, GPU6 30.228 Mh/s, GPU7 30.496 Mh/s, GPU8 30.526 Mh/s,
GPU9 30.219 Mh/s, GPU10 30.227 Mh/s, GPU11 28.236 Mh/s
ETH: 03/15/18-10:42:44 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 362.665 Mh/s, Total Shares: 418, Rejected: 0, Time: 01:21
Hope it helps
|
|
|
|
|
rolys
Newbie
Offline
Activity: 9
Merit: 0
|
|
March 15, 2018, 11:36:47 AM |
|
Hi
I've noticed with the newer versions from 11.2 although claymore shows higher hashrate the calculated hashrate at the pool is significantly lower. I've reduced the clocks on a couple of cards so no memory errors but still a lot lower. Anyone experience this? Any suggestions?
|
|
|
|
|
infectedmushi
Newbie
Offline
Activity: 46
Merit: 0
|
|
March 15, 2018, 11:40:00 AM |
|
@Claymore seem there's issues with 11.5 and nvidia cards. i am getting a terrible fluctuation on reported hashrate https://preview.ibb.co/ij0KNx/reported.pngETH - Total Speed: 188.675 Mh/s, Total Shares: 2285, Rejected: 0, Time: 13:25
ETH: GPU0 31.579 Mh/s, GPU1 31.503 Mh/s, GPU2 30.955 Mh/s, GPU3 31.549 Mh/s, GPU4 31.540 Mh/s, GPU5 31.550 Mh/s
ETH: 03/15/18-11:35:04 - SHARE FOUND - (GPU 2)
ETH: Share accepted (47 ms)!
ETH: 03/15/18-11:35:09 - New job from eu1.ethermine.org:5555
ETH - Total Speed: [b]156.278 Mh/s[/b], Total Shares: 2286, Rejected: 0, Time: 13:25
ETH: GPU0 25.105 Mh/s, GPU1 25.118 Mh/s, GPU2 26.570 Mh/s, GPU3 26.366 Mh/s, GPU4 26.521 Mh/s, GPU5 26.598 Mh/s
ETH: 03/15/18-11:35:22 - New job from eu1.ethermine.org:5555
ETH - Total Speed: 186.744 Mh/s, Total Shares: 2286, Rejected: 0, Time: 13:25
ETH: GPU0 31.149 Mh/s, GPU1 31.464 Mh/s, GPU2 31.531 Mh/s, GPU3 29.711 Mh/s, GPU4 31.457 Mh/s, GPU5 31.433 Mh/s
ETH: 03/15/18-11:36:08 - New job from eu1.ethermine.org:5555
ETH - Total Speed: [b]175.530 Mh/s[/b], Total Shares: 2287, Rejected: 0, Time: 13:26
ETH: GPU0 28.538 Mh/s, GPU1 26.970 Mh/s, GPU2 31.539 Mh/s, GPU3 28.457 Mh/s, GPU4 31.550 Mh/s, GPU5 28.477 Mh/s
ETH: 03/15/18-11:36:09 - New job from eu1.ethermine.org:5555
ETH - Total Speed: 187.653 Mh/s, Total Shares: 2287, Rejected: 0, Time: 13:26
ETH: GPU0 31.562 Mh/s, GPU1 31.523 Mh/s, GPU2 30.570 Mh/s, GPU3 31.454 Mh/s, GPU4 31.554 Mh/s, GPU5 30.989 Mh/s
ETH: 03/15/18-11:36:11 - SHARE FOUND - (GPU 1)
ETH: Share accepted (47 ms)!
ETH: 03/15/18-11:36:17 - New job from eu1.ethermine.org:5555
ETH - Total Speed: 189.257 Mh/s, Total Shares: 2288, Rejected: 0, Time: 13:26
ETH: GPU0 31.550 Mh/s, GPU1 31.503 Mh/s, GPU2 31.549 Mh/s, GPU3 31.549 Mh/s, GPU4 31.537 Mh/s, GPU5 31.569 Mh/s
ETH: 03/15/18-11:36:19 - New job from eu1.ethermine.org:5555 as you can see, it goes as low as 156MH/s | 175MH/s, etc ... the rig does 188MH/s with 6 nvidia 1070, on previous versions. anyone experiencing the same? |
|
|
|
|
|
Andrey123
|
|
March 15, 2018, 11:45:23 AM |
|
When you first run version 11.5
Windows wrote the error that the program EthDcrMiner64.exe is stopped!
When restarted, the miner started.
But now I'm worried that nothing will close.
|
| Hello! Voluntary donations that will go towards the development of my coin.
34bwEhH3GMx6swYXt2NBfFbYGkdTcaWtXz....BTC | |
| |
|
|
|
|
Tr1n1tY
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 15, 2018, 12:06:19 PM |
|
Hi
I've noticed with the newer versions from 11.2 although claymore shows higher hashrate the calculated hashrate at the pool is significantly lower. I've reduced the clocks on a couple of cards so no memory errors but still a lot lower. Anyone experience this? Any suggestions?
Hi I found lowering mclocks by 20, and increasing the cclock by 15 helped with that issue with my rig, as in my previous post |
|
|
|
|
atecubanoS
Newbie
Offline
Activity: 32
Merit: 0
|
|
March 15, 2018, 12:48:02 PM |
|
@Claymore seem there's issues with 11.5 and nvidia cards. i am getting a terrible fluctuation on reported hashrate https://preview.ibb.co/ij0KNx/reported.pngas you can see, it goes as low as 156MH/s | 175MH/s, etc ... the rig does 188MH/s with 6 nvidia 1070, on previous versions. anyone experiencing the same? No problem here... ETH: 03/15/18-09:44:43 - New job from eth.suprnova.cc:5000
ETH - Total Speed: 141.293 Mh/s, Total Shares: 2123, Rejected: 0, Time: 18:09
ETH: GPU0 26.806 Mh/s, GPU1 20.281 Mh/s, GPU2 26.661 Mh/s, GPU3 20.363 Mh/s, GPU4 20.389 Mh/s, GPU5 26.794 Mh/s
GPU #0: GeForce GTX 1070 Ti, 8113 MB available, 19 compute units, capability: 6.1 (pci bus 1:0:0)
GPU #1: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 2:0:0)
GPU #2: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1 (pci bus 3:0:0)
GPU #3: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 5:0:0)
GPU #4: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 6:0:0)
GPU #5: GeForce GTX 1070 Ti, 8114 MB available, 19 compute units, capability: 6.1 (pci bus 7:0:0)
ETH - Total Speed: 141.374 Mh/s, Total Shares: 2123(400+304+385+316+334+384), Rejected: 0(0+0+0+0+0+0), Time: 18:09
ETH: GPU0 26.824 Mh/s, GPU1 20.355 Mh/s, GPU2 26.648 Mh/s, GPU3 20.352 Mh/s, GPU4 20.373 Mh/s, GPU5 26.823 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 140.837 Mh/s ETH: 03/15/18-09:46:29 - New job from eth.suprnova.cc:5000
ETH - Total Speed: 141.418 Mh/s, Total Shares: 2127, Rejected: 0, Time: 18:11
ETH: GPU0 26.829 Mh/s, GPU1 20.381 Mh/s, GPU2 26.677 Mh/s, GPU3 20.347 Mh/s, GPU4 20.365 Mh/s, GPU5 26.819 Mh/s
GPU #0: GeForce GTX 1070 Ti, 8113 MB available, 19 compute units, capability: 6.1 (pci bus 1:0:0)
GPU #1: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 2:0:0)
GPU #2: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1 (pci bus 3:0:0)
GPU #3: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 5:0:0)
GPU #4: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 6:0:0)
GPU #5: GeForce GTX 1070 Ti, 8114 MB available, 19 compute units, capability: 6.1 (pci bus 7:0:0)
ETH - Total Speed: 141.339 Mh/s, Total Shares: 2127(400+305+385+317+334+386), Rejected: 0(0+0+0+0+0+0), Time: 18:11
ETH: GPU0 26.782 Mh/s, GPU1 20.359 Mh/s, GPU2 26.648 Mh/s, GPU3 20.356 Mh/s, GPU4 20.387 Mh/s, GPU5 26.808 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 140.881 Mh/s ETH: 03/15/18-09:47:09 - New job from eth.suprnova.cc:5000
ETH - Total Speed: 139.801 Mh/s, Total Shares: 2128, Rejected: 0, Time: 18:11
ETH: GPU0 26.816 Mh/s, GPU1 19.637 Mh/s, GPU2 26.383 Mh/s, GPU3 19.762 Mh/s, GPU4 20.388 Mh/s, GPU5 26.816 Mh/s
GPU #0: GeForce GTX 1070 Ti, 8113 MB available, 19 compute units, capability: 6.1 (pci bus 1:0:0)
GPU #1: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 2:0:0)
GPU #2: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1 (pci bus 3:0:0)
GPU #3: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 5:0:0)
GPU #4: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 6:0:0)
GPU #5: GeForce GTX 1070 Ti, 8114 MB available, 19 compute units, capability: 6.1 (pci bus 7:0:0)
ETH - Total Speed: 141.264 Mh/s, Total Shares: 2128(400+305+385+317+334+387), Rejected: 0(0+0+0+0+0+0), Time: 18:11
ETH: GPU0 26.794 Mh/s, GPU1 20.367 Mh/s, GPU2 26.674 Mh/s, GPU3 20.230 Mh/s, GPU4 20.383 Mh/s, GPU5 26.815 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 140.940 Mh/s My configuration: MyUser@UbuntuRig:~$ nvidia-smi
Thu Mar 15 09:51:20 2018
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 387.26 Driver Version: 387.26 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 107... On | 00000000:01:00.0 Off | N/A |
| 4% 54C P2 108W / 110W | 2614MiB / 8113MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 106... On | 00000000:02:00.0 Off | N/A |
| 0% 52C P2 81W / 80W | 2570MiB / 6072MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 1070 On | 00000000:03:00.0 Off | N/A |
| 1% 53C P2 104W / 110W | 2592MiB / 8114MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 3 GeForce GTX 106... On | 00000000:05:00.0 Off | N/A |
| 22% 54C P2 81W / 80W | 2570MiB / 6072MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 4 GeForce GTX 106... On | 00000000:06:00.0 Off | N/A |
| 22% 54C P2 81W / 80W | 2570MiB / 6072MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 5 GeForce GTX 107... On | 00000000:07:00.0 Off | N/A |
| 0% 53C P2 113W / 110W | 2614MiB / 8114MiB | 97% Default |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 22119 C ...MyUser/Claymore/v11.5/ethdcrminer64 2595MiB |
| 1 22119 C ...MyUser/Claymore/v11.5/ethdcrminer64 2551MiB |
| 2 22119 C ...MyUser/Claymore/v11.5/ethdcrminer64 2573MiB |
| 3 22119 C ...MyUser/Claymore/v11.5/ethdcrminer64 2551MiB |
| 4 22119 C ...MyUser/Claymore/v11.5/ethdcrminer64 2551MiB |
| 5 22119 C ...MyUser/Claymore/v11.5/ethdcrminer64 2595MiB |
+-----------------------------------------------------------------------------+ |
|
|
|
|
rolys
Newbie
Offline
Activity: 9
Merit: 0
|
|
March 15, 2018, 01:11:19 PM |
|
Hi
I've noticed with the newer versions from 11.2 although claymore shows higher hashrate the calculated hashrate at the pool is significantly lower. I've reduced the clocks on a couple of cards so no memory errors but still a lot lower. Anyone experience this? Any suggestions?
Hi I found lowering mclocks by 20, and increasing the cclock by 15 helped with that issue with my rig, as in my previous post I'll give it a try thanks |
|
|
|
|
j2james
Newbie
Offline
Activity: 80
Merit: 0
|
|
March 15, 2018, 01:26:42 PM |
|
@Claymore seem there's issues with 11.5 and nvidia cards. i am getting a terrible fluctuation on reported hashrate https://preview.ibb.co/ij0KNx/reported.pngETH - Total Speed: 188.675 Mh/s, Total Shares: 2285, Rejected: 0, Time: 13:25
ETH: GPU0 31.579 Mh/s, GPU1 31.503 Mh/s, GPU2 30.955 Mh/s, GPU3 31.549 Mh/s, GPU4 31.540 Mh/s, GPU5 31.550 Mh/s
ETH: 03/15/18-11:35:04 - SHARE FOUND - (GPU 2)
ETH: Share accepted (47 ms)!
ETH: 03/15/18-11:35:09 - New job from eu1.ethermine.org:5555
ETH - Total Speed: [b]156.278 Mh/s[/b], Total Shares: 2286, Rejected: 0, Time: 13:25
ETH: GPU0 25.105 Mh/s, GPU1 25.118 Mh/s, GPU2 26.570 Mh/s, GPU3 26.366 Mh/s, GPU4 26.521 Mh/s, GPU5 26.598 Mh/s
ETH: 03/15/18-11:35:22 - New job from eu1.ethermine.org:5555
ETH - Total Speed: 186.744 Mh/s, Total Shares: 2286, Rejected: 0, Time: 13:25
ETH: GPU0 31.149 Mh/s, GPU1 31.464 Mh/s, GPU2 31.531 Mh/s, GPU3 29.711 Mh/s, GPU4 31.457 Mh/s, GPU5 31.433 Mh/s
ETH: 03/15/18-11:36:08 - New job from eu1.ethermine.org:5555
ETH - Total Speed: [b]175.530 Mh/s[/b], Total Shares: 2287, Rejected: 0, Time: 13:26
ETH: GPU0 28.538 Mh/s, GPU1 26.970 Mh/s, GPU2 31.539 Mh/s, GPU3 28.457 Mh/s, GPU4 31.550 Mh/s, GPU5 28.477 Mh/s
ETH: 03/15/18-11:36:09 - New job from eu1.ethermine.org:5555
ETH - Total Speed: 187.653 Mh/s, Total Shares: 2287, Rejected: 0, Time: 13:26
ETH: GPU0 31.562 Mh/s, GPU1 31.523 Mh/s, GPU2 30.570 Mh/s, GPU3 31.454 Mh/s, GPU4 31.554 Mh/s, GPU5 30.989 Mh/s
ETH: 03/15/18-11:36:11 - SHARE FOUND - (GPU 1)
ETH: Share accepted (47 ms)!
ETH: 03/15/18-11:36:17 - New job from eu1.ethermine.org:5555
ETH - Total Speed: 189.257 Mh/s, Total Shares: 2288, Rejected: 0, Time: 13:26
ETH: GPU0 31.550 Mh/s, GPU1 31.503 Mh/s, GPU2 31.549 Mh/s, GPU3 31.549 Mh/s, GPU4 31.537 Mh/s, GPU5 31.569 Mh/s
ETH: 03/15/18-11:36:19 - New job from eu1.ethermine.org:5555 as you can see, it goes as low as 156MH/s | 175MH/s, etc ... the rig does 188MH/s with 6 nvidia 1070, on previous versions. anyone experiencing the same? I have the same beginning from 11.0. So I'm still using 10.6. |
|
|
|
|
|
