Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[fredeq]

Problem is because epool.txt doesn't recognise this and there is no logfile and no mining limit and other things.
TTLI: 88, TSOP: 92, TSTART: 50, ETHI: 1, LI: 15, MODE: 1, LOGFILE: logfile.txt

Makes sense cause all of this stuff should be defined globally at startup.
It will still use those values even if switching to pool from epools

[1715010325]

1715010325

[Blisk]

Problem is because epool.txt doesn't recognise this and there is no logfile and no mining limit and other things.
TTLI: 88, TSOP: 92, TSTART: 50, ETHI: 1, LI: 15, MODE: 1, LOGFILE: logfile.txt

Makes sense cause all of this stuff should be defined globally at startup.
It will still use those values even if switching to pool from epools

So all that should be in bat file
EthDcrMiner64.exe -ttli 88 -tstop 92 -tstart 50 -ethi 1 -li 15 -mport 0 -mode 1 -logfile logfile.txt
and this should be in epools.txt
POOL: eu2.nanopool.org:9999, WALLET: 0x360d6f9efea21c82d341504366fd1c2eeea8fa9d, WORKER: workername, PSW: x, ESM: 2, ALLPOOLS: 1

this is not good, all should be in one file.

[Assaro]

Hi guys

having still some R390 and geting just 18,5 Mh.... is there any option how to fine tune it to get at least 25 Mh?

I know was looking for any info, just found an statement that older cards will perform slower as the time is going...

Thanks for any idea

[xolling]

There are 4 1060 6GB cards, three of them are Micron memory, but the fourth got Hunix and it gives a maximum of 22 mega-cache. So the question is how to separately register another strap (command) on this card

my bat

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 00000000000000000000.1060nvidia -epsw x -mode 1 -strap 4 -sintensity 23 


help me

[0xcosmos]

~snip~

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 00000000000000000000.1060nvidia -epsw x -mode 1 -strap 4,4,4,1 -sintensity 23

this should apply strap 4 config for first three cards which are micron and strap 1 for last card which is hynix

[Doucesti]

Works great, thanks!
 

[prostor]

Hi guys

having still some R390 and geting just 18,5 Mh.... is there any option how to fine tune it to get at least 25 Mh?

I know was looking for any info, just found an statement that older cards will perform slower as the time is going...

Thanks for any idea

The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os

this man give us screenshot
https://prnt.sc/orllyp

[bouffemonshort]

Hello, what do you use as a pool with a 2GB AMD graphics card (AMD 3xx)? and with 2 graphics cards in crossfire does it work?
thx

[dgeo]

Does anyone have such problem - on Win 7, v15, drvs 436.30 and 441.66 and GTX1070 cards hashrate is about 22Mhash.... Tried to clean drivers with DDU and reinstall them, tried with/withous straps, w/wo OC etc.... On other algorythms speed is same as before, no change. And some months ago with older claymore all was fine, but now, with v15 such problem

upd: same issue on Phoenix miner, but all fine on nanominer and gminer.... can't even guess what it can be...

Confirmed, got the same issue on 1070TI. Problem is related to ETC mining.

Hashrate drops to 17-20 MH/s when mining ETC. Tested on Nicehash and Ethermine ETC pool.
Tried almost all avaiable miner software (Claymore, PhoenixMiner, GMiner, Ethminer 0.18/0.19a) and always got the same behaviour.

Probably this only related to Nvidia cards, or even Pascal family.

Also confirmed, win7 and GTX1070 low hashrate on ETC. win10 - ok.

[k08r4]

Hello people,
these days my VEGA 64 started to throw out this error. And it won't work. I tried the driver update, I re-uploaded the latest version of Claymore but still the same is happening please for your advice, what else can I try?

Code:

07:10:09:578	1fa4	ETH: Received error: {"id":14,"jsonrpc":"2.0","error":{"code":27,"message":"Illegalparams"}}

07:10:09:579	1fa4	remove first packet 263
07:10:10:062	1d58	checked ETH share on CPU, spent 7ms
07:10:10:063	1d58	sent: {"id":12,"method":"eth_submitWork","params":["0xb3561970064e9ad2","0x9043f87206023cc5989efe906150b10a05ce8b9f5c9443c191e5b82f14cb7f66","0xde0271328c912b7a73e77c063326038a61530e19b89d3ac289f97b426fbecd62"]}

07:10:10:063	1d58	ETH: put share nonce b3561970064e9ad2
07:10:10:065	1fa4	ETH: 01/21/20-07:10:10 - SHARE FOUND - (GPU 2)
07:10:10:597	1fa4	buf: {"id":0,"jsonrpc":"2.0","result":["0xdb4c79897e9704404baa1d0ff4e4c024bbc3642b9c4d2cc19b44b6972e9b0c6e","0xde5831c2adcc2b6dd5c3622861d60016c532fa27f0b01d9d54724ca0ce7b83ed","0x01ffffffffffffffffffffffffffffffffffffffffffffffffffffffff","018e3a"],"height":9325571}

07:10:10:599	1fa4	ETH: 01/21/20-07:10:10 - New job from eu1.ethermine.org:14444
07:10:10:601	1fa4	target: 0x00000001ffffffff (diff: 2147MH), epoch 310(3.42GB)
07:10:10:604	1fa4	ETH - Total Speed: 247.361 Mh/s, Total Shares: 66, Rejected: 0, Time: 00:03
07:10:10:625	1fa4	ETH: GPU0 43.881 Mh/s, GPU1 35.881 Mh/s, GPU2 45.979 Mh/s, GPU3 40.389 Mh/s, GPU4 40.818 Mh/s, GPU5 40.415 Mh/s
07:10:11:719	1fa4	buf: {"id":12,"jsonrpc":"2.0","error":{"code":27,"message":"Illegal params"}}

07:10:11:724	1fa4	ETH: Received error: {"id":12,"jsonrpc":"2.0","error":{"code":27,"message":"Illegalparams"}}

07:10:14:007	10e8	Quit, please wait...

[mag106]

Does anyone have such problem - on Win 7, v15, drvs 436.30 and 441.66 and GTX1070 cards hashrate is about 22Mhash.... Tried to clean drivers with DDU and reinstall them, tried with/withous straps, w/wo OC etc.... On other algorythms speed is same as before, no change. And some months ago with older claymore all was fine, but now, with v15 such problem

upd: same issue on Phoenix miner, but all fine on nanominer and gminer.... can't even guess what it can be...

increase your core clock.

I confirm, the same problem

[Andrew_Tassel]

Claymore, do you know what no one AMD card can allocate more 4GB vram in a single chunk?

If you run benchmark on 8Gb card with #377 epoch you'll get
OpenCL error -61 - cannot allocate big buffer for DAG.
OpenCL error -38 - cannot write buffer for DAG

Same errors you'll get on 4Gb card with #351 epoch.

[xelbyb]

People, how to change the color in the place where he writes about the temperature? I want to make yellow on a black background. That red does not differ much.

[scryptr]

Hi,

I just started using Claymore dual miner v15 version. but it keep disconnecting and restarting miner. Kindly help me that how can i get working miner.

I am using 1050TI. and following is error log:

<BIG SNIP>

GPU error, you need to restart miner

4GB CARDS ARE TOO SMALL--

If you are running Windows 10, the driver allocates a portion of the physical GPU memory to Windows.  This leaves less than 4GB for Claymore, or other mining programs.

Linux may be a solution, but not for very long.  Also, there are other more profitable algos for nVidia cards.       --scryptr

[Trehjulingsleffe]

Why are 4gb cards to small for some people and some not?

I'm running Windows 10 and 4GB cards. Works like a charm.

0,5 GB left to allocate

https://imgur.com/uduLXFJ

[fredeq]

Do you have any solution for me ? Are you on Linux ?

Why are 4gb cards to small for some people and some not?

I'm running Windows 10 and 4GB cards. Works like a charm.

0,5 GB left to allocate

https://imgur.com/uduLXFJ

Same here working on my 4gb amd cards.
4gb nvidia cards wont start though.

[scryptr]

LOOK AT YIIMP POOLS--

YIIMP pool software was designed for nVidia cards.  They generally feature a profitability chart; try selecting coins high on the chart.

The most popular coins are not always the most profitable.       --scryptr

[AzzAz]

People, how to change the color in the place where he writes about the temperature? I want to make yellow on a black background. That red does not differ much.

try -colors 4

[AzzAz]

Do you have any solution for me ? Are you on Linux ?

Why are 4gb cards to small for some people and some not?

I'm running Windows 10 and 4GB cards. Works like a charm.

0,5 GB left to allocate

https://imgur.com/uduLXFJ

Did you try to put one 1060/6GB or 1070/8GB as GPU 0? some ppl solved it that way

[bpotter43]

Can anyone tell me how to turn off the benchmark? its not even in the bat file yet it continues to be running even after taking it out of the bat file