Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[fk2]

under linux: why cant my 2080 mine ethash under claymore? see error in screenshot. i tried 2 2080 and 3 different linux os all of them have same error

https://ibb.co/VvNmLbT

[yoonline]

this happening today in all my rigs exactly 20 min loop and restart again...
clay 14.7 and 11.7 failing too


08:54:30:936   da0   ETH: 06/29/19-08:54:30 - New job from us1.ethermine.org:4444
08:54:30:937   da0   target: 0x0000000112e0be82 (diff: 4000MH), epoch 268(3.09GB)
08:54:30:938   da0   ETH - Total Speed: 23.959 Mh/s, Total Shares: 9, Rejected: 0, Time: 00:20
08:54:30:939   da0   ETH: GPU0 23.959 Mh/s
08:54:31:419   16b8   watchdog - fminer thread hangs
08:54:31:420   16b8   em hbt: 0, fm hbt: 182125,
08:54:31:421   16b8   Miner thread hangs, need to restart miner!
08:54:31:422   16b8   Rebooting
08:54:31:423   1c40   server: accept failed with error: 10004
08:54:31:523   da0   buf: {"id":0,"jsonrpc":"2.0","result":["0x65dd927ad6b578a31bcf50ce59333b0a80dd840ca0ba370b765a617422223c08","0xb7781db17c162df6a1ec6a368fe9f1","0x0000000112e02e62d01511f12a60693e70e52ba","0x7ae0c5"]}

08:54:31:524   da0   ETH: 06/29/19-08:54:31 - New job from us1.ethermine.org:4444
08:54:31:524   da0   target: 0x0000000112e0be82 (diff: 4000MH), epoch 268(3.09GB)
08:54:31:525   da0   ETH - Total Speed: 23.959 Mh/s, Total Shares: 9, Rejected: 0, Time: 00:20
08:54:31:526   da0   ETH: GPU0 23.959 Mh/s
08:54:31:635   da0   buf: {"id":0,"jsonrpc":"2.0","result":["0x3e57bdcc57631e4e667dd4aec7c8adc9936585f79bc3378c11e2acd6adac605","0xb7781db17c1dd439b3c01679985ff68fe9f1","0x0000000112e0be826d694b2e62d01511f12a601fbaec8bc02357593e70e52ba","0x7ae0c5"]}

08:54:31:636   da0   ETH: 06/29/19-08:54:31 - New job from us1.ethermine.org:4444
08:54:31:636   da0   target: 0x0000000112e0be82 (diff: 4000MH), epoch 268(3.09GB)
08:54:31:637   da0   ETH - Total Speed: 23.959 Mh/s, Total Shares: 9, Rejected: 0, Time: 00:20
08:54:31:638   da0   ETH: GPU0 23.959 Mh/s
08:54:31:825   23d4   Quit, please wait...

[Xavieras]

CLAYMORE STUCK AFTER START

Who is the magic wizard that can help me out,

I have been going to all posts, but I cant get a suitable solution for my problem with Claymore 12.0. Tried everything.


Later versions of claymore give me the Can not create DAG file, problem.  Which is said to be a virt mem problem. (i ve put the virt mem to even 50GB, and even tried 80GB) went throught the CHKDSK /f /r solutions and sata AHCI controller driver solutions.
Or I get a video TDR failure, which should be a driver issue.


I cant figure out why half of my miners suddenly are stuck... and the rest are working fine... ? exactelly same BIOS setup, same CPU, same DDR. Both miners are in every way: an exact clone.

Throuble shooting:
swapped all risers with GPUs from the working one to the one that stucks.
i went through BIOS, 4G is on. tried GEN1 and GEN2....GEN AUTO   (the working miner is actually even on GEN  AUTO)
But...
So when i swap the SSD only from the working RIG to the exact same RIG, that isnt working... claymore gets stuck again....

Tried to restart / reload windows 6 times.
With first having 1 GPU, and adding everytime an extra one.

I have a 6 GPU 1080TI card, with the latest Nvidia drivers installed, (used DDU, took the Latest Nvidea driver, and as well tried 425.1 and 430.86)  
Asrock BTC pro 2.0 board latest Bios update with the 4g decoding option which is ON) , with 16GB DDR, intel i5 4core processor. 256 samsung EVO SSD.


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0xc20ca97592ecfbd89a86df556b7784376a672e30.miner1 -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal my.miner1 1 -dpsw x -dcoin lbc


what on earth can it be? what am i over seeing wrong for the last weeks?
wont make sence why same hardware works with one miner and not with the other one. I tried swappin SSD, or cloning an IMG file.


additional info:
Thanks a lot for the reply,

I am Running on windows
I have not (yet) any afterburner installed. i am not overclocking and have the full power (1600W ) available


Claymore 12.0
When i run claymore 12.0 , its finds the pool and after create DAG for each GPU, the screen freezes, and i have to manually (swich of power) restart
when i wait longer i get the blue windows screen DPC watchdog violation

Claymore 14.7
When i run claymore 14.7 , its is running bit better, One of the GPU s (sometime GPU4 and somethimes GPU 3) is on 0
NVML: can not get current temperature error 15.
then it reboots with one GPU less.



Any help Would be Appreciated, and rewarded from my side!!


thanks in advance

I have almost same problem. My rig was worked fine about 1week. Later something went wrong... I started search why my pc don't see only 6gpu of 7. Started to check cables, and found that cable which goes from psu to riser burned one contactor of six. Ok I thought maybe it's because I using cable for more then one year. I plug it to other psu place and turned on with -starp 1. Again my rig started work well but only about one hour and again it started to restart and again one gpu lost. Again checked cable and again same problem. Then I tried again to change in psu cable place and turned on rig without -strap function and currently everything is ok. I am not sure but I think something not so good with that -strap function. My rig working on two psu  which is corsair RM850X. Have someone same issue?

Thank a lot!

[yoonline]

fminer thread hangs

today in all my rigs any ideas?

[ManDoneKTM]

i found a bug in your miner ...  https://imgur.com/a/k5Nw9k3 and he still staying like this , i have to go to the rig and reset manually ...

[ManDoneKTM]

try 14.7 version

Same issues .... With phoenix miner doesnt give me that issues .

[lebuawu2]

i found a bug in your miner ...  https://imgur.com/a/k5Nw9k3 and he still staying like this , i have to go to the rig and reset manually ...

if one of your GPU dead better you restart windows rather than restart only miner.

what is your setting for your 580 to get 34 mh/s? memory type, cclock, mclock ?

[lebuawu2]

I have almost same problem. My rig was worked fine about 1week. Later something went wrong... I started search why my pc don't see only 6gpu of 7. Started to check cables, and found that cable which goes from psu to riser burned one contactor of six. Ok I thought maybe it's because I using cable for more then one year. I plug it to other psu place and turned on with -starp 1. Again my rig started work well but only about one hour and again it started to restart and again one gpu lost. Again checked cable and again same problem. Then I tried again to change in psu cable place and turned on rig without -strap function and currently everything is ok. I am not sure but I think something not so good with that -strap function. My rig working on two psu  which is corsair RM850X. Have someone same issue?

Thank a lot!

I got the same issue, the problem because I connected 3 GPU riser to one cable sata from PSU.
maximum should be only 2 GPU.

[mu_enrico]

I started search why my pc don't see only 6gpu of 7. Started to check cables, and found that cable which goes from psu to riser burned one contactor of six.

I think -strap increases your GPU wattage consumption, and you don't have proper wiring. Use a high-quality 8-pin cable (y-splitter) so that you don't burn your cable.

[mizeria]

Can I mine ETH and PASC with this miner?
I have configured the miner and got this errors:

16:26:22:760   2a98    PASC: Stratum - Connected (pasc-eu1.nanopool.org:15556) (unsecure)
16:26:22:816   2a98   buf: {"id":1,"result":[[["mining.notify","00000000000000000000000000000000"]],"4e616e6f706f6f6c2f3337393735313730363332323130303030",8],"error":null}
{"id":null,"method":"mining.set_difficulty","params":[0.0000152587890625]}
{"id":null,"method":"mining.notify","params":["20e61","0000000000000000000000000000000000000000000000000000000000000000","1B040500CA02200042B6D71C8BDD83EB6DAB79713BCFCFF330C4AB5BA2BB7B7C02A30882B54E31E 62000CA1FF7B7804CE8BC3AFA0C5A7F7F72E372C30A3A3FFAC81563C67672781D2DFD20A1070000 00000004000400A6046A20","8E05BE3F6747CB51AFC92A4E5292E3AFEB4C1B2BF96629AAC3B6ABBC249A08BF53E726E4F8D430C 424E76FB64683D01B90997FF8FCECD76DBA545DC53E0D8A9900000000",[],"00000000","10000000","5d18b876",true]}
{"id":5,"result":true,"error":null}
{"id":null,"method":"mining.notify","params":["20e61","0000000000000000000000000000000000000000000000000000000000000000","1B040500CA02200042B6D71C8BDD83EB6DAB79713BCFCFF330C4AB5BA2BB7B7C02A30882B54E31E 62000CA1FF7B7804CE8BC3AFA0C5A7F7F72E372C30A3A3FFAC81563C67672781D2DFD20A1070000 00000004000400A6046A20","8E05BE3F6747CB51AFC92A4E5292E3AFEB4C1B2BF96629AAC3B6ABBC249A08BF53E726E4F8D430C 424E76FB64683D01B90997FF8FCECD76DBA545DC53E0D8A9900000000",[],"00000000","10000000","5d18b876",true]}
{"id":2,"result":true,"error":null}

16:26:22:816   2a98   remove first packet 1119
16:26:22:817   2a98   remove first packet 1044
16:26:22:818   2a98   remove first packet 558
16:26:22:818   2a98   remove first packet 522
16:26:22:819   2a98   remove first packet 36
16:26:23:090   2a98    PASC: Authorized
16:26:23:091   2a98    PASC: 06/30/19-16:26:23 - SHARE FOUND - (GPU 0)
16:26:23:092   2a98   sent: {"params": ["1076484-91.mize", "20e61", "3530303030303030", "5d18b876", "f53d0004"], "id": 10, "method": "mining.submit"}

16:26:23:092   2a98    PASC: 06/30/19-16:26:23 - SHARE FOUND - (GPU 0)
16:26:23:093   2a98   sent: {"params": ["1076484-91.mize", "20e61", "3530303030303030", "5d18b876", "e4570008"], "id": 10, "method": "mining.submit"}

16:26:23:094   2a98    PASC: 06/30/19-16:26:23 - SHARE FOUND - (GPU 0)
16:26:23:094   2a98   sent: {"params": ["1076484-91.mize", "20e61", "3530303030303030", "5d18b876", "774f000c"], "id": 10, "method": "mining.submit"}

16:26:23:095   2a98    PASC: 06/30/19-16:26:23 - SHARE FOUND - (GPU 0)
16:26:23:095   2a98   sent: {"params": ["1076484-91.mize", "20e61", "3530303030303030", "5d18b876", "fc811031"], "id": 10, "method": "mining.submit"}

16:26:23:096   2a98    PASC: 06/30/19-16:26:23 - SHARE FOUND - (GPU 0)
16:26:23:096   2a98   sent: {"params": ["1076484-91.mize", "20e61", "3530303030303030", "5d18b876", "c94cde27"], "id": 10, "method": "mining.submit"}

16:26:23:097   2a98    PASC: 06/30/19-16:26:23 - SHARE FOUND - (GPU 0)
16:26:23:098   2a98   sent: {"params": ["1076484-91.mize", "20e61", "3830303030303030", "5d18b876", "5e290002"], "id": 10, "method": "mining.submit"}

16:26:23:099   2a98    PASC: 06/30/19-16:26:23 - SHARE FOUND - (GPU 0)
16:26:23:101   2a98   sent: {"params": ["1076484-91.mize", "20e61", "3830303030303030", "5d18b876", "ce35000c"], "id": 10, "method": "mining.submit"}

16:26:23:101   2a98    PASC: 06/30/19-16:26:23 - SHARE FOUND - (GPU 0)
16:26:23:273   2a98   sent: {"params": ["1076484-91.mize", "20e61", "3830303030303030", "5d18b876", "1f3f0018"], "id": 10, "method": "mining.submit"}

16:26:23:275   2a98   buf: {"id":10,"result":null,"error":["Low difficulty share"]}
{"id":10,"result":null,"error":["Low difficulty share"]}
{"id":10,"result":null,"error":["Low difficulty share"]}
{"id":10,"result":null,"error":["Low difficulty share"]}
{"id":10,"result":null,"error":["Low difficulty share"]}
{"id":10,"result":null,"error":["Low difficulty share"]}
{"id":10,"result":null,"error":["Low difficulty share"]}

Thank you!

[darkneorus]

as far as I know - Pascal has changed the algo a looong time ago, Claymore's miner can't mine it anymore.

[mizeria]

as far as I know - Pascal has changed the algo a looong time ago, Claymore's miner can't mine it anymore.

Are you sure I cannot dual mine this ETH/PASCcoin with the Claymore?
I just need to know for sure so I stop struggling about this dual mining.
Right now I was mining PASCAL with the nanominer but with the cpu only and it works good but I want to switch to mine ETH again with the GPUs and that's why I was asking if I can just dual it if worth and works.
Thank you!

[mizeria]

I found on forum that:

Pascal Coin changed algo to the CPU friendly RandomHash in December 2018
The coin can no longer be dual mined.

Also I have set the miner to only mine ETH.
But I have very low shares accepted. Like 1 in 15 minutes.
It can be the difficulty or something?
Can anyone help?
Thanks!

[rodney2250]

Hi all,

I am getting the following error message: Cannot build OpenCL program for GPU 0 with version 14.x

This is just a test miner for an Ethereum fork - having a small DAG - so I don't think it's related to the memory. I am running Windows 10, august 2017 blockchain drivers and have tested against 14.6 and 14.7. Version 12 works fine.

Any ideas?

Code:

ETH: 1 pool is specified
Main Ethereum pool is europe.ethash-hub.miningpoolhub.com:20565
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU, "z" to find best -dcri values
Press "y" to set Compute Mode and disable CrossFire in AMD drivers for all cards
OpenCL initializing...

AMD Cards available: 2
GPU #0: Oland (AMD Radeon R7 200 Series), 3072 MB available, 5 compute units (pci bus 1:0:0)
GPU #1: Oland (AMD Radeon R7 200 Series), 3072 MB available, 5 compute units (pci bus 2:0:0)
POOL/SOLO version
Cannot build OpenCL program for GPU 0
Cannot build OpenCL program for GPU 1
GPU #0: set -etha as 1 (ETH algo for slow cards)
GPU #1: set -etha as 1 (ETH algo for slow cards)
No NVIDIA CUDA GPUs detected.
T

[Geniusvzla]

i found a bug in your miner ...  https://imgur.com/a/k5Nw9k3 and he still staying like this , i have to go to the rig and reset manually ...

Friend is not an error in the miner but you should probably increase -cvddc and -mvddc for that GPU in specific. You need more data from your GPU to be able to help you a little more to solve your problem!
When that type of error is generated you must manually restart your computer to restore the values ​​and thus change its configuration otherwise it will always remain as in a circle and will not leave there.
excuse my bad English

[Geniusvzla]

i found a bug in your miner ...  https://imgur.com/a/k5Nw9k3 and he still staying like this , i have to go to the rig and reset manually ...

if one of your GPU dead better you restart windows rather than restart only miner.

what is your setting for your 580 to get 34 mh/s? memory type, cclock, mclock ?

Greetings, depending on the model of the GPU rx 580 they have; For example the Sapphire Radeon RX 580 Nitro Plus modified GPU reaches more than 33Mh / s and if it comes with Micron memory could go from 34Mh / s

[mizeria]

I have few shares accepted. Like 1 in 15 minutes.
Can anyone help what I am doing wrong?
I am using to mine Claymore v 14.7, mining ETH.
Thanks!

[big_daddy]

Are the latest AMD drives (Adrenalin 2019 Edition 19.6.3 Optional) stable with Claymore's v14.7?

[WhackOBill]

Hi all,

I am getting the following error message: Cannot build OpenCL program for GPU 0 with version 14.x

This is just a test miner for an Ethereum fork - having a small DAG - so I don't think it's related to the memory. I am running Windows 10, august 2017 blockchain drivers and have tested against 14.6 and 14.7. Version 12 works fine.

Any ideas?

I think you need -allcoins 1 if you're mining a fork.  Also, there's probably not enough memory for a real ETH DAG and so you probably need to disable the mining fee process which would need to create a large DAG every hour.

[Eli83]

Hi!

I get such message @ start from 14.7:


Socket was closed remotely (by pool)
ETH: Connection lost, retry in 20 sec...
ETH: Stratum - connecting to 'eu1.ethermine.org' <172.65.207.106> port 5555 (SSL/TLS)

then all works fine some period of time (like hour or so)

and then 14.7 stop working in NotNofee mode and throughing me (unstoppable) by such messages:
3:58:57:781   6e4   DevFee: failed to mine for a long time, something is wrong, "nofee" mode is enabled until successful devfee mining.

Such of beheaviour was since 12.0 (last w/o problems was 11.7), so I have to switch from Claymoore to Phoenix or so, at early year start.

.....
What can be doing to fix it?