[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[Hotmetal]

@tytanik - i experience the same issue issue like most of users with NV and more cards.
H110+ 13 x P106 setup, found everything from the start, have the following problems:
1. Overclocking works pretty strange, to clock the memory of the P106 from 4000 to 4900 i needed to put 1600 as parameter. Steps that increase the MHz are really not relevant. Putting 900 clock to 4400 something.
2. Finally stabilized the machine to 325MH and runs well but it reboots without reason 14 times for 10 hours. Temperatures are under 65C, target is 76C.

So how to fix those nonsense reboots ?

Not all the cards will overclock as well as others, so 1 badly working card can cause a reboot.
That being said, SMOS has some weird behavior with NVIDIA cards.
Until they are fixed, you're better off mining ETH with (H110+ 13 x P106) with the following overclock settings:

GPU Core: -200
Memory MHz: 500
Power Limit (watt): 70
Target Temperature ℃: 75
Minimum Fan speed %: 20

I have about 12 rigs, all of them with those settings.. no reboots, less noise and less heat.

[Armnc]

Just startet to use SMOS. Thus far it looks great.

Is a way to target the GPU power limit for each card separately for NVIDIA cards? Claymore does not support target clocks and temp on NVIDA gpu for some reason. Also want to meantion experiencing the same issue as in previous posts about offsetting power limits.

Keep up the great work.

[jeanvin]

my amd vega54 isnt recognised by simplemining OS
is this for real?? update please @tytanick

OK guys. I have some progress in undervolting and it might accually work.
If you guys want time frame then in next 2-6 days it should be released.
There will be OPTIONAL UPDATE near each RX OS rig which has old kernel (without dagfix)
This update will install dgfix kernel and packages but ONLY when you will click on it.
I dont want install it automatically.
If someone has already dagfix OS RX then no need to install this update.

On top of this there will be auto update which will fix some scripts in system.
After that you will be able to write undervolting values in Overclocking Modal under rig options.

After all of that you will have restored ethereum mining speed andnormal power wattage.
Probably even some less power draw in certain gpus but i will leave that for users to test

AFTER that will be done and fixed, the next in line is NVIDIA some problems with some p106 and gtx1060 gpus.
AFTER fixing nvidia i will focus on VEGA which is already laying on my desk and waiting for support.

In a mean time there will be builded some HELP/FAQ page.

So right now please dont write me any more emails "when" and "how" - i really need to fix this shit once for all.

@tytanick, you are the boss, thank you for this new!

[Epaka]

@tytanik - i experience the same issue issue like most of users with NV and more cards.
H110+ 13 x P106 setup, found everything from the start, have the following problems:
1. Overclocking works pretty strange, to clock the memory of the P106 from 4000 to 4900 i needed to put 1600 as parameter. Steps that increase the MHz are really not relevant. Putting 900 clock to 4400 something.
2. Finally stabilized the machine to 325MH and runs well but it reboots without reason 14 times for 10 hours. Temperatures are under 65C, target is 76C.

So how to fix those nonsense reboots ?

Not all the cards will overclock as well as others, so 1 badly working card can cause a reboot.
That being said, SMOS has some weird behavior with NVIDIA cards.
Until they are fixed, you're better off mining ETH with (H110+ 13 x P106) with the following overclock settings:

GPU Core: -200
Memory MHz: 500
Power Limit (watt): 70
Target Temperature ℃: 75
Minimum Fan speed %: 20

I have about 12 rigs, all of them with those settings.. no reboots, less noise and less heat.

Thanks for the settings, are any of your rigs 1070s? My 7 card rigs work fine on 0/1400 110w but on the 13 GPU Asrock I can only OC 0/400 110w or it reboots like you are saying. I've even swapped the cards to the other rig and they work fine at 1400 on it with no resets for days.

[sony87]

@tytanik - i experience the same issue issue like most of users with NV and more cards.
H110+ 13 x P106 setup, found everything from the start, have the following problems:
1. Overclocking works pretty strange, to clock the memory of the P106 from 4000 to 4900 i needed to put 1600 as parameter. Steps that increase the MHz are really not relevant. Putting 900 clock to 4400 something.
2. Finally stabilized the machine to 325MH and runs well but it reboots without reason 14 times for 10 hours. Temperatures are under 65C, target is 76C.

So how to fix those nonsense reboots ?

Not all the cards will overclock as well as others, so 1 badly working card can cause a reboot.
That being said, SMOS has some weird behavior with NVIDIA cards.
Until they are fixed, you're better off mining ETH with (H110+ 13 x P106) with the following overclock settings:

GPU Core: -200
Memory MHz: 500
Power Limit (watt): 70
Target Temperature ℃: 75
Minimum Fan speed %: 20

I have about 12 rigs, all of them with those settings.. no reboots, less noise and less heat.

thanks for the settings, what hashrate you have with those ? btw if I put 500 on memory clock my cards don't overclock with 500mhz but something like 200 only, that's why if I want to reach +900 i put 1600... very strange

[Hotmetal]

thanks for the settings, what hashrate you have with those ?

~22.5 MH/s per GPU.

[SlowGrowth]

Yes im getting also problems...the rigs that reboot all get stuck again on launching "unexpected inconsistency run fsck manually... fsck exited with status code 4..." Only flashing new pens i could solve the problem in other rigs but do i have to do it and not allow any reboot? Whats going on?

Edit Only flashing a new bios on MOBO i can get a new pen to work... wich leads me to think of corrupted update?

[crypik]

Quick question is the Gpu order consistent with motherboard order?

[dzp]

I am beginner, trying to set the wallet in simplemining. When ever I check the mining stats it shows me the page with invalid wallet message...
What am I doing wrong?

[-droid-]

question

when using this OS with nvidia cards, and the NV build.. we are only limited to ewbf or skunk/eth based mining programs right?

because my 1080TI's on ewbf seem to get half of what they should be hashing at

the claymore zec miner is not working with the NV build... why is this?

[deadsix]

question

when using this OS with nvidia cards, and the NV build.. we are only limited to ewbf or skunk/eth based mining programs right?

because my 1080TI's on ewbf seem to get half of what they should be hashing at

the claymore zec miner is not working with the NV build... why is this?

... Because Claymores miner is AMD ONLY ... it literally there in the name "Claymore's ZCash AMD GPU Miner", and if that doesn't clear it up for you, it helps to go through the Readme file occasionally.

[-droid-]

question

when using this OS with nvidia cards, and the NV build.. we are only limited to ewbf or skunk/eth based mining programs right?

because my 1080TI's on ewbf seem to get half of what they should be hashing at

the claymore zec miner is not working with the NV build... why is this?

... Because Claymores miner is AMD ONLY ... it literally there in the name "Claymore's ZCash AMD GPU Miner", and if that doesn't clear it up for you, it helps to go through the Readme file occasionally.

claymore-zec-v12.6

damn you are right... my bad

so smOS is basically crap for mining zec with nvidia cards

i just need to mess with overclock settings on ewbf, figured stock settings 1080ti would get 600 sol at least

[ledio]

On 1070 cards oc don't work like it should, very little difference on ZEC EWBF miner between core clock 190 and 250, only 10sol but when rising power from 102 to 115 same clock, sols go by 30. Please check/fix the behaviour of the NV cards on OC and power limit.

[Balazar]

Hello all, I can not handle the problem of starting mining with VTC Vertcoin on ccminer below I present my settings:
-a lyra2v2 -o stratum + tcp: //hub.miningpoolhub.com: 12018 -u xxxx.rig1 -p x

OC is set to 10,200,200 and the system keeps returning me the following error (of course the OC settings are testable, because I tried everything and always the same, sometimes it happens that it will start mining but after a restart) does anyone have an idea? The cards are GTX 1060,1070 and P106-6g total 12GPU:

Applying CoreOffset: 10 MemoryOffset: 200 for GPU 10 with GPU Type: 3
Available power limit for GPU 10 is 78.00 W, 182.00 W
Applying PowerLimit: 182 watt for GPU 10
Applying CoreOffset: 10 MemoryOffset: 200 for GPU 11 with GPU Type: 3
Available power limit for GPU 11 is 78.00 W, 182.00 W
Applying PowerLimit: 182 watt for GPU 11
============ Starting Miner ===============
*** ccminer 2.2 for nVidia GPUs by tpruvot@github config.json Built with the nVidia CUDA Toolkit 8.0 64-bits
Originally based on Christian Buchner and Christian H. project
Include some algos from alexis78, djm34, sp, tsiv and klausT.
BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)
[2017-10-01 13:19:42] Starting on stratum tcp://hub.miningpoolhub.com:12018
[2017-10-01 13:19:43] NVML GPU monitoring enabled.
[2017-10-01 13:19:43] 12 miner threads started, using 'lyra2v2' algorithm.
[2017-10-01 13:19:43] Stratum difficulty set to 16 (0.06250)
[2017-10-01 13:19:43] GPU #2: Intensity set to 20, 1048576 cuda threads
[2017-10-01 13:19:43] GPU #3: Intensity set to 20, 1048576 cuda threads
[2017-10-01 13:19:43] GPU #8: Intensity set to 20, 1048576 cuda threads
[2017-10-01 13:19:43] GPU #6: Intensity set to 20, 1048576 cuda threads
[2017-10-01 13:19:43] GPU #10: Intensity set to 20, 1048576 cuda threads
[2017-10-01 13:19:43] GPU #4: Intensity set to 20, 1048576 cuda threads
[2017-10-01 13:19:43] GPU #7: Intensity set to 20, 1048576 cuda threads
[2017-10-01 13:19:43] GPU #5: Intensity set to 20, 1048576 cuda threads
[2017-10-01 13:19:43] GPU #0: Intensity set to 20, 1048576 cuda threads
[2017-10-01 13:19:43] GPU #1: Intensity set to 20, 1048576 cuda threads
[2017-10-01 13:19:43] GPU #9: Intensity set to 20, 1048576 cuda threads
[2017-10-01 13:19:43] GPU #11: Intensity set to 20, 1048576 cuda threads
/root/xminer.sh: line 49: 3510 Segmentation fault $MINER_PATH $MINER_OPTIONS
Miner ended/crashed. Restarting miner in 10 seconds --------------

[SlowGrowth]

Hey guys, im having troubles with this one rig in particular ( some other rigs did the same but they are now working somehow ) and im hoping someone could help me with this... I have flashed already 4 new pens for this rig in particular, cleared smos and flashed MOBO bios and still get the same problems...

Everytime i start a new fresh pen ( after the described method above ) i get the OS stuck on this part:

https://imgur.com/26RAMPS

It just hangs there everytime and does nothing... After i reboot the rig i get this another error:

https://imgur.com/Tuag7ly

Did anyone ever had the same problem or can help me to fix it?

Much apreciated

EDIT Everytime one rig reboots the OS gets stuck on the 2 image i posted... Clearly its out of my hands, now i have 4 rigs down instead of 1... im switching back to win if no one can help me fix the problem...

[BenScoobert]

Does anyone know why gpu ignores overclock and memory apples normally?

[Morpheus Poland]

I have 1080ti ..best setting without reboot is 160w   and 120 core this is optimal 3x strix 1080ti rog=2080 sol

200w  and 100 core is more energy consuptiom 2170 sol ;-)

[hqthief]

911 949 961 (6)
3802 3802 3802

These are my current core/mem stats. The one in the middle is 1070, the other two are 1060s. Also the power limit on overclocking panel is set at Power Limit (watt):6

The core and memory is obviously underclocked. What should be my new settings in xxx,xxx,xxx order for core and memory. I don't need very high overclocking. Just a safe clock is fine. But these are obviously underclocked. I'm mining ethereum and the 1060s are mining at about 14mh, 1070 at 22mh.

[Inspector_Cypto]

@tytanik - i experience the same issue issue like most of users with NV and more cards.
H110+ 13 x P106 setup, found everything from the start, have the following problems:
1. Overclocking works pretty strange, to clock the memory of the P106 from 4000 to 4900 i needed to put 1600 as parameter. Steps that increase the MHz are really not relevant. Putting 900 clock to 4400 something.
2. Finally stabilized the machine to 325MH and runs well but it reboots without reason 14 times for 10 hours. Temperatures are under 65C, target is 76C.

So how to fix those nonsense reboots ?

Yes, please do let us know how to fix these constant reboots on H110+ 13 x 1070 setups. Thank you.

[Jphawx]

Need a miner for BTX please Timetravel10 algo. unless I missed something.