Swedish ASIC miner company kncminer.com

[Vega]

It's interesting. With 0.93 in the first 12 hours there were a few cgminer restarts, the av hashrate were 495 Gh/s, with high HW errors.
After about a day, hash rate climbed to 506 Gh/s and stayed there for 24 hours, not a single cgminer restart. The HW errors dropped too.

Just upgraded to 0.94 45 minutes ago, speed now is 473 Gh/s and climbing slowly. We'll see what happens in a day.

[1713992203]

1713992203

[1713992203]

1713992203

[1713992203]

1713992203

[1713992203]

1713992203

[1713992203]

1713992203

[Rampion]

It's interesting. With 0.93 in the first 12 hours there were a few cgminer restarts, the av hashrate were 495 Gh/s, with high HW errors.
After about a day, hash rate climbed to 506 Gh/s and stayed there for 24 hours, not a single cgminer restart. The HW errors dropped too.

Just upgraded to 0.94 45 minutes ago, speed now is 473 Gh/s and climbing slowly. We'll see what happens in a day.

Yep, I had the same experience - the more the miners run, the more stable and fast they become. For example, I have one Jupiter that worked flawlessly from day one, at the beginning hashrate was around 500GH/s, after +5 days running is now stable at 530GH/s (3 hours avg.)

[RHA]

my temp:

ASIC slot #1: 49.5 ℃
ASIC slot #2: 45.0 ℃
ASIC slot #3: 49.0 ℃
ASIC slot #4: 41.0 ℃

results:

(5s):575.6G (avg):535.7Gh/s | A:153750  R:8125  HW:14740  WU:8207.0/m

Xialla, you forgot to add your room temperature is 13 ℃.

[Rampion]

Update on miner with 0.94: hw errors going through the roof, they were previously 8% and they are now 19%

Hashrate slowly climbing to previous levels thou

[mruiter]

Mine are instable.

Temps are high

ASIC slot #1: 76.0 ℃
ASIC slot #2: 74.5 ℃
ASIC slot #3: 79.5 ℃
ASIC slot #4: 64.0 ℃

Fans are OK. Airflow ok. Airflow all the same way. Normal room temp of 20 degrees.
Is there a way i can tell the fans to go faster.

fw?
hash rate?

Hashrate 400 with lots of errors. Fans are blowing the right way, double checked.... Fw 94

[electrox]

My Saturn is hashing at 250 - 256 Gh/s.

However regularly cores are being disabled ("due to more than 10 HW errors) and then after a while enabled again only to be disabled shortly thereafter again.

During this process hash rate goes down to 150-200 Gh/s.
In the time the cores are disabled 5sec average is mostly around 266 Gh/s.

So I get the feeling that it would be better if those cores were disabled once and for all.
But maybe the new upgrade will fix this issue.

I summed up the cores that are being disabled: 11, 12, 14, 16, 17, 18, 19, 26, 29, 33, 34, 35, 38, 40, 41, 42, 43, 46, 47
Probably even more but those are the ones I have noticed.

What about you guys? Are you getting similar symptoms?
Is it normal?

may not apply but someone said on the kncminer forums to check you heatsink fans etc all blowing the right direction...some folks said they had to fix ..not sure it applies but figured i'd post it

Thanks searing for the tip. I checked and the fans are correctly installed.

[loktang1125]

what could be wrong if i cant connect to my miners
chrome : could not connect to 192.168.1.101 ( 102 103 also)

[mininganon]

.94 firmware not working for me??? looks nice lol

[Searing]

may not apply but someone said on the kncminer forums to check you heatsink fans etc all blowing the right direction...some folks said they had to fix ..not sure it applies but figured i'd post it
[/quote]

Thanks searing for the tip. I checked and the fans are correctly installed.
[/quote]


Well remember this is all about ME and my #304x order.....you guys have to get all this fixed....and as an aside I want a "stable" rate of 600gh....at 530w and such...I just want to plug my units in and then sit around sipping Martini's don't ya know

[mat542]

I found this after work :


Dammit, I hate UPS !!!
I never received a call and never called them.
It's too late now to call, I hope that it isn't an other person that is trying to get my miners !

Day 2, Order 7x, Paid 3 June, Received today in France.
Somebody tried to collect my packages at the UPS center.
Fortunately UPS asked for an ID and he just went away. Be careful !

[Rampion]

I found this after work :


Dammit, I hate UPS !!!
I never received a call and never called them.
It's too late now to call, I hope that it isn't an other person that is trying to get my miners !

Day 2, Order 7x, Paid 3 June, Received today in France.
Somebody tried to collect my packages at the UPS center.
Fortunately UPS asked for an ID and he just went away. Be careful !

Holy fuck! How the hell could somebody know you were going to receive the miners? Any clue on which was the attack vector? We should rule out that is somebody inside UPS Sweden who knows what's going on and giving the heads up to others..

[mininganon]

Hey testing .94 firmware right now!

Was 460-470ghs@535...

[sbfree]

the only thing I can come up with now is that your device has been assigned to you per order#/pay date....but then your unit happens to be defective....now it gets bypassed until new parts arrive for your unit, while the guy behind you lucks out, gets assigned a GOOD unit, and it gets shipped/delivered....and the rest of us suckers get passed on by.....order queue is sacred....so sacred that if you unit is bunk it gets by passed so the guy behind you keeps his position in the SACRED QUEUE??

well that sucks ...the person whose unit was defective should be entertained first ..basic rule he paid first ....

not saying it's right, but I have no other explaination for why one person with a later order #/pay date gets their KNC unit before someone with an earlier order # /pay date.....

or why some stay "in progress" while others actually receive units who went into 'in progress' status later. Nothing makes sense but what I stated above.

order #23xx ordered and paid june 18th saturn...status "in progress" as of Monday 1am pacific time....now more that 48HRS AGO!!!!!
[/quote]

The 23XX order that has been quoted, has that been verified? Could be just trolling!
[/quote]

FUKT, what do you mean trolling? and yeah, i verified it through my knc account...and now i feel FUKT...thanks.

[loktang1125]

KNC1 :  cant even connect into it



KNC2 :  runing

HW status:

ASIC slot #1: 60.5 ℃
ASIC slot #2: -
ASIC slot #3: 48.5 ℃
ASIC slot #4: -
ASIC slot #5: 56.5 ℃
ASIC slot #6: 46.0 ℃

Room : 27℃

still got accepted by FPGA

[-Redacted-]

Sent KnC an email yesterday evening asking why I have already received order #756, but have two other orders - one with earlier and one with later order order numbers than 765 - that were paid for at the same exact time that don't seem to be moving...

Just received tracking numbers for orders #75x and #76x - which had been stuck in "IN PROGRESS" since October 1st.

[Madazam]

Sent some nice emails and was polite on the phone ....just a got a qualitative answer which basically meant you will get it when you will get it .....sent some hard worded emails and get a response from UPS....label created no pick up yet ...this not a nice mans world...

[Puppet]

Holy fuck! How the hell could somebody know you were going to receive the miners? Any clue on which was the attack vector? We should rule out that is somebody inside UPS Sweden who knows what's going on and giving the heads up to others..

I was wondering the same. Another possibility is that someone hacked KnC's server.

[Bargraphics]

Holy fuck! How the hell could somebody know you were going to receive the miners? Any clue on which was the attack vector? We should rule out that is somebody inside UPS Sweden who knows what's going on and giving the heads up to others..

I was wondering the same. Another possibility is that someone hacked KnC's server.

And the only thing they wanted were a couple Jupiters in France!

...

Anyways...

Received a bit of BTC from the "KnC Hosting Address" that is supposedly running my 11 Jupiters. The payout looks like they have been running for about a day if this is indeed from Hosting.

No email received as well. Once email has been received I will update.

Thanks!

[timmmers]

I found this after work :


Dammit, I hate UPS !!!
I never received a call and never called them.
It's too late now to call, I hope that it isn't an other person that is trying to get my miners !

Day 2, Order 7x, Paid 3 June, Received today in France.
Somebody tried to collect my packages at the UPS center.
Fortunately UPS asked for an ID and he just went away. Be careful !

Holy fuck! How the hell could somebody know you were going to receive the miners? Any clue on which was the attack vector? We should rule out that is somebody inside UPS Sweden who knows what's going on and giving the heads up to others..

More likely the driver left a card, maybe someone took that or maybe left it at the wrong address? I've had that happen several times with couriers.

[helmax]

my connection home is adsl 8 mb is enough? or i need put fiber 30mb?

best pool advise?

anyone can helpme